/* * Copyright (c) International Business Machines Corp., 2006 * Copyright (c) Nokia Corporation, 2006, 2007 * * SPDX-License-Identifier: GPL-2.0+ * * Author: Artem Bityutskiy (Битюцкий Артём) */ #ifndef __UBI_UBI_H__ #define __UBI_UBI_H__ #ifndef __UBOOT__ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #else #include #endif #include #include #include "ubi-media.h" #include /* Maximum number of supported UBI devices */ #define UBI_MAX_DEVICES 32 /* UBI name used for character devices, sysfs, etc */ #define UBI_NAME_STR "ubi" /* Normal UBI messages */ #ifdef CONFIG_UBI_SILENCE_MSG #define ubi_msg(ubi, fmt, ...) #else #define ubi_msg(ubi, fmt, ...) printk(UBI_NAME_STR "%d: " fmt "\n", \ ubi->ubi_num, ##__VA_ARGS__) #endif /* UBI warning messages */ #define ubi_warn(ubi, fmt, ...) pr_warn(UBI_NAME_STR "%d warning: %s: " fmt "\n", \ ubi->ubi_num, __func__, ##__VA_ARGS__) /* UBI error messages */ #define ubi_err(ubi, fmt, ...) pr_err(UBI_NAME_STR "%d error: %s: " fmt "\n", \ ubi->ubi_num, __func__, ##__VA_ARGS__) /* Background thread name pattern */ #define UBI_BGT_NAME_PATTERN "ubi_bgt%dd" /* * This marker in the EBA table means that the LEB is um-mapped. * NOTE! It has to have the same value as %UBI_ALL. */ #define UBI_LEB_UNMAPPED -1 /* * In case of errors, UBI tries to repeat the operation several times before * returning error. The below constant defines how many times UBI re-tries. */ #define UBI_IO_RETRIES 3 /* * Length of the protection queue. The length is effectively equivalent to the * number of (global) erase cycles PEBs are protected from the wear-leveling * worker. */ #define UBI_PROT_QUEUE_LEN 10 /* The volume ID/LEB number/erase counter is unknown */ #define UBI_UNKNOWN -1 /* * The UBI debugfs directory name pattern and maximum name length (3 for "ubi" * + 2 for the number plus 1 for the trailing zero byte. */ #define UBI_DFS_DIR_NAME "ubi%d" #define UBI_DFS_DIR_LEN (3 + 2 + 1) /* * Error codes returned by the I/O sub-system. * * UBI_IO_FF: the read region of flash contains only 0xFFs * UBI_IO_FF_BITFLIPS: the same as %UBI_IO_FF, but also also there was a data * integrity error reported by the MTD driver * (uncorrectable ECC error in case of NAND) * UBI_IO_BAD_HDR: the EC or VID header is corrupted (bad magic or CRC) * UBI_IO_BAD_HDR_EBADMSG: the same as %UBI_IO_BAD_HDR, but also there was a * data integrity error reported by the MTD driver * (uncorrectable ECC error in case of NAND) * UBI_IO_BITFLIPS: bit-flips were detected and corrected * * Note, it is probably better to have bit-flip and ebadmsg as flags which can * be or'ed with other error code. But this is a big change because there are * may callers, so it does not worth the risk of introducing a bug */ enum { UBI_IO_FF = 1, UBI_IO_FF_BITFLIPS, UBI_IO_BAD_HDR, UBI_IO_BAD_HDR_EBADMSG, UBI_IO_BITFLIPS, }; /* * Return codes of the 'ubi_eba_copy_leb()' function. * * MOVE_CANCEL_RACE: canceled because the volume is being deleted, the source * PEB was put meanwhile, or there is I/O on the source PEB * MOVE_SOURCE_RD_ERR: canceled because there was a read error from the source * PEB * MOVE_TARGET_RD_ERR: canceled because there was a read error from the target * PEB * MOVE_TARGET_WR_ERR: canceled because there was a write error to the target * PEB * MOVE_TARGET_BITFLIPS: canceled because a bit-flip was detected in the * target PEB * MOVE_RETRY: retry scrubbing the PEB */ enum { MOVE_CANCEL_RACE = 1, MOVE_SOURCE_RD_ERR, MOVE_TARGET_RD_ERR, MOVE_TARGET_WR_ERR, MOVE_TARGET_BITFLIPS, MOVE_RETRY, }; /* * Return codes of the fastmap sub-system * * UBI_NO_FASTMAP: No fastmap super block was found * UBI_BAD_FASTMAP: A fastmap was found but it's unusable */ enum { UBI_NO_FASTMAP = 1, UBI_BAD_FASTMAP, }; /* * Flags for emulate_power_cut in ubi_debug_info * * POWER_CUT_EC_WRITE: Emulate a power cut when writing an EC header * POWER_CUT_VID_WRITE: Emulate a power cut when writing a VID header */ enum { POWER_CUT_EC_WRITE = 0x01, POWER_CUT_VID_WRITE = 0x02, }; /** * struct ubi_wl_entry - wear-leveling entry. * @u.rb: link in the corresponding (free/used) RB-tree * @u.list: link in the protection queue * @ec: erase counter * @pnum: physical eraseblock number * * This data structure is used in the WL sub-system. Each physical eraseblock * has a corresponding &struct wl_entry object which may be kept in different * RB-trees. See WL sub-system for details. */ struct ubi_wl_entry { union { struct rb_node rb; struct list_head list; } u; int ec; int pnum; }; /** * struct ubi_ltree_entry - an entry in the lock tree. * @rb: links RB-tree nodes * @vol_id: volume ID of the locked logical eraseblock * @lnum: locked logical eraseblock number * @users: how many tasks are using this logical eraseblock or wait for it * @mutex: read/write mutex to implement read/write access serialization to * the (@vol_id, @lnum) logical eraseblock * * This data structure is used in the EBA sub-system to implement per-LEB * locking. When a logical eraseblock is being locked - corresponding * &struct ubi_ltree_entry object is inserted to the lock tree (@ubi->ltree). * See EBA sub-system for details. */ struct ubi_ltree_entry { struct rb_node rb; int vol_id; int lnum; int users; struct rw_semaphore mutex; }; /** * struct ubi_rename_entry - volume re-name description data structure. * @new_name_len: new volume name length * @new_name: new volume name * @remove: if not zero, this volume should be removed, not re-named * @desc: descriptor of the volume * @list: links re-name entries into a list * * This data structure is utilized in the multiple volume re-name code. Namely, * UBI first creates a list of &struct ubi_rename_entry objects from the * &struct ubi_rnvol_req request object, and then utilizes this list to do all * the job. */ struct ubi_rename_entry { int new_name_len; char new_name[UBI_VOL_NAME_MAX + 1]; int remove; struct ubi_volume_desc *desc; struct list_head list; }; struct ubi_volume_desc; /** * struct ubi_fastmap_layout - in-memory fastmap data structure. * @e: PEBs used by the current fastmap * @to_be_tortured: if non-zero tortured this PEB * @used_blocks: number of used PEBs * @max_pool_size: maximal size of the user pool * @max_wl_pool_size: maximal size of the pool used by the WL sub-system */ struct ubi_fastmap_layout { struct ubi_wl_entry *e[UBI_FM_MAX_BLOCKS]; int to_be_tortured[UBI_FM_MAX_BLOCKS]; int used_blocks; int max_pool_size; int max_wl_pool_size; }; /** * struct ubi_fm_pool - in-memory fastmap pool * @pebs: PEBs in this pool * @used: number of used PEBs * @size: total number of PEBs in this pool * @max_size: maximal size of the pool * * A pool gets filled with up to max_size. * If all PEBs within the pool are used a new fastmap will be written * to the flash and the pool gets refilled with empty PEBs. * */ struct ubi_fm_pool { int pebs[UBI_FM_MAX_POOL_SIZE]; int used; int size; int max_size; }; /** * struct ubi_volume - UBI volume description data structure. * @dev: device object to make use of the the Linux device model * @cdev: character device object to create character device * @ubi: reference to the UBI device description object * @vol_id: volume ID * @ref_count: volume reference count * @readers: number of users holding this volume in read-only mode * @writers: number of users holding this volume in read-write mode * @exclusive: whether somebody holds this volume in exclusive mode * @metaonly: whether somebody is altering only meta data of this volume * * @reserved_pebs: how many physical eraseblocks are reserved for this volume * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME) * @usable_leb_size: logical eraseblock size without padding * @used_ebs: how many logical eraseblocks in this volume contain data * @last_eb_bytes: how many bytes are stored in the last logical eraseblock * @used_bytes: how many bytes of data this volume contains * @alignment: volume alignment * @data_pad: how many bytes are not used at the end of physical eraseblocks to * satisfy the requested alignment * @name_len: volume name length * @name: volume name * * @upd_ebs: how many eraseblocks are expected to be updated * @ch_lnum: LEB number which is being changing by the atomic LEB change * operation * @upd_bytes: how many bytes are expected to be received for volume update or * atomic LEB change * @upd_received: how many bytes were already received for volume update or * atomic LEB change * @upd_buf: update buffer which is used to collect update data or data for * atomic LEB change * * @eba_tbl: EBA table of this volume (LEB->PEB mapping) * @checked: %1 if this static volume was checked * @corrupted: %1 if the volume is corrupted (static volumes only) * @upd_marker: %1 if the update marker is set for this volume * @updating: %1 if the volume is being updated * @changing_leb: %1 if the atomic LEB change ioctl command is in progress * @direct_writes: %1 if direct writes are enabled for this volume * * The @corrupted field indicates that the volume's contents is corrupted. * Since UBI protects only static volumes, this field is not relevant to * dynamic volumes - it is user's responsibility to assure their data * integrity. * * The @upd_marker flag indicates that this volume is either being updated at * the moment or is damaged because of an unclean reboot. */ struct ubi_volume { struct device dev; struct cdev cdev; struct ubi_device *ubi; int vol_id; int ref_count; int readers; int writers; int exclusive; int metaonly; int reserved_pebs; int vol_type; int usable_leb_size; int used_ebs; #ifndef __UBOOT__ int last_eb_bytes; #else u32 last_eb_bytes; #endif long long used_bytes; int alignment; int data_pad; int name_len; char name[UBI_VOL_NAME_MAX + 1]; int upd_ebs; int ch_lnum; long long upd_bytes; long long upd_received; void *upd_buf; int *eba_tbl; unsigned int checked:1; unsigned int corrupted:1; unsigned int upd_marker:1; unsigned int updating:1; unsigned int changing_leb:1; unsigned int direct_writes:1; }; /** * struct ubi_volume_desc - UBI volume descriptor returned when it is opened. * @vol: reference to the corresponding volume description object * @mode: open mode (%UBI_READONLY, %UBI_READWRITE, %UBI_EXCLUSIVE * or %UBI_METAONLY) */ struct ubi_volume_desc { struct ubi_volume *vol; int mode; }; struct ubi_wl_entry; /** * struct ubi_debug_info - debugging information for an UBI device. * * @chk_gen: if UBI general extra checks are enabled * @chk_io: if UBI I/O extra checks are enabled * @chk_fastmap: if UBI fastmap extra checks are enabled * @disable_bgt: disable the background task for testing purposes * @emulate_bitflips: emulate bit-flips for testing purposes * @emulate_io_failures: emulate write/erase failures for testing purposes * @emulate_power_cut: emulate power cut for testing purposes * @power_cut_counter: count down for writes left until emulated power cut * @power_cut_min: minimum number of writes before emulating a power cut * @power_cut_max: maximum number of writes until emulating a power cut * @dfs_dir_name: name of debugfs directory containing files of this UBI device * @dfs_dir: direntry object of the UBI device debugfs directory * @dfs_chk_gen: debugfs knob to enable UBI general extra checks * @dfs_chk_io: debugfs knob to enable UBI I/O extra checks * @dfs_chk_fastmap: debugfs knob to enable UBI fastmap extra checks * @dfs_disable_bgt: debugfs knob to disable the background task * @dfs_emulate_bitflips: debugfs knob to emulate bit-flips * @dfs_emulate_io_failures: debugfs knob to emulate write/erase failures * @dfs_emulate_power_cut: debugfs knob to emulate power cuts * @dfs_power_cut_min: debugfs knob for minimum writes before power cut * @dfs_power_cut_max: debugfs knob for maximum writes until power cut */ struct ubi_debug_info { unsigned int chk_gen:1; unsigned int chk_io:1; unsigned int chk_fastmap:1; unsigned int disable_bgt:1; unsigned int emulate_bitflips:1; unsigned int emulate_io_failures:1; unsigned int emulate_power_cut:2; unsigned int power_cut_counter; unsigned int power_cut_min; unsigned int power_cut_max; char dfs_dir_name[UBI_DFS_DIR_LEN + 1]; struct dentry *dfs_dir; struct dentry *dfs_chk_gen; struct dentry *dfs_chk_io; struct dentry *dfs_chk_fastmap; struct dentry *dfs_disable_bgt; struct dentry *dfs_emulate_bitflips; struct dentry *dfs_emulate_io_failures; struct dentry *dfs_emulate_power_cut; struct dentry *dfs_power_cut_min; struct dentry *dfs_power_cut_max; }; /** * struct ubi_device - UBI device description structure * @dev: UBI device object to use the the Linux device model * @cdev: character device object to create character device * @ubi_num: UBI device number * @ubi_name: UBI device name * @vol_count: number of volumes in this UBI device * @volumes: volumes of this UBI device * @volumes_lock: protects @volumes, @rsvd_pebs, @avail_pebs, beb_rsvd_pebs, * @beb_rsvd_level, @bad_peb_count, @good_peb_count, @vol_count, * @vol->readers, @vol->writers, @vol->exclusive, * @vol->metaonly, @vol->ref_count, @vol->mapping and * @vol->eba_tbl. * @ref_count: count of references on the UBI device * @image_seq: image sequence number recorded on EC headers * * @rsvd_pebs: count of reserved physical eraseblocks * @avail_pebs: count of available physical eraseblocks * @beb_rsvd_pebs: how many physical eraseblocks are reserved for bad PEB * handling * @beb_rsvd_level: normal level of PEBs reserved for bad PEB handling * * @autoresize_vol_id: ID of the volume which has to be auto-resized at the end * of UBI initialization * @vtbl_slots: how many slots are available in the volume table * @vtbl_size: size of the volume table in bytes * @vtbl: in-RAM volume table copy * @device_mutex: protects on-flash volume table and serializes volume * creation, deletion, update, re-size, re-name and set * property * * @max_ec: current highest erase counter value * @mean_ec: current mean erase counter value * * @global_sqnum: global sequence number * @ltree_lock: protects the lock tree and @global_sqnum * @ltree: the lock tree * @alc_mutex: serializes "atomic LEB change" operations * * @fm_disabled: non-zero if fastmap is disabled (default) * @fm: in-memory data structure of the currently used fastmap * @fm_pool: in-memory data structure of the fastmap pool * @fm_wl_pool: in-memory data structure of the fastmap pool used by the WL * sub-system * @fm_protect: serializes ubi_update_fastmap(), protects @fm_buf and makes sure * that critical sections cannot be interrupted by ubi_update_fastmap() * @fm_buf: vmalloc()'d buffer which holds the raw fastmap * @fm_size: fastmap size in bytes * @fm_eba_sem: allows ubi_update_fastmap() to block EBA table changes * @fm_work: fastmap work queue * @fm_work_scheduled: non-zero if fastmap work was scheduled * * @used: RB-tree of used physical eraseblocks * @erroneous: RB-tree of erroneous used physical eraseblocks * @free: RB-tree of free physical eraseblocks * @free_count: Contains the number of elements in @free * @scrub: RB-tree of physical eraseblocks which need scrubbing * @pq: protection queue (contain physical eraseblocks which are temporarily * protected from the wear-leveling worker) * @pq_head: protection queue head * @wl_lock: protects the @used, @free, @pq, @pq_head, @lookuptbl, @move_from, * @move_to, @move_to_put @erase_pending, @wl_scheduled, @works, * @erroneous, @erroneous_peb_count, @fm_work_scheduled, @fm_pool, * and @fm_wl_pool fields * @move_mutex: serializes eraseblock moves * @work_sem: used to wait for all the scheduled works to finish and prevent * new works from being submitted * @wl_scheduled: non-zero if the wear-leveling was scheduled * @lookuptbl: a table to quickly find a &struct ubi_wl_entry object for any * physical eraseblock * @move_from: physical eraseblock from where the data is being moved * @move_to: physical eraseblock where the data is being moved to * @move_to_put: if the "to" PEB was put * @works: list of pending works * @works_count: count of pending works * @bgt_thread: background thread description object * @thread_enabled: if the background thread is enabled * @bgt_name: background thread name * * @flash_size: underlying MTD device size (in bytes) * @peb_count: count of physical eraseblocks on the MTD device * @peb_size: physical eraseblock size * @bad_peb_limit: top limit of expected bad physical eraseblocks * @bad_peb_count: count of bad physical eraseblocks * @good_peb_count: count of good physical eraseblocks * @corr_peb_count: count of corrupted physical eraseblocks (preserved and not * used by UBI) * @erroneous_peb_count: count of erroneous physical eraseblocks in @erroneous * @max_erroneous: maximum allowed amount of erroneous physical eraseblocks * @min_io_size: minimal input/output unit size of the underlying MTD device * @hdrs_min_io_size: minimal I/O unit size used for VID and EC headers * @ro_mode: if the UBI device is in read-only mode * @leb_size: logical eraseblock size * @leb_start: starting offset of logical eraseblocks within physical * eraseblocks * @ec_hdr_alsize: size of the EC header aligned to @hdrs_min_io_size * @vid_hdr_alsize: size of the VID header aligned to @hdrs_min_io_size * @vid_hdr_offset: starting offset of the volume identifier header (might be * unaligned) * @vid_hdr_aloffset: starting offset of the VID header aligned to * @hdrs_min_io_size * @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset * @bad_allowed: whether the MTD device admits of bad physical eraseblocks or * not * @nor_flash: non-zero if working on top of NOR flash * @max_write_size: maximum amount of bytes the underlying flash can write at a * time (MTD write buffer size) * @mtd: MTD device descriptor * * @peb_buf: a buffer of PEB size used for different purposes * @buf_mutex: protects @peb_buf * @ckvol_mutex: serializes static volume checking when opening * * @dbg: debugging information for this UBI device */ struct ubi_device { struct cdev cdev; struct device dev; int ubi_num; char ubi_name[sizeof(UBI_NAME_STR)+5]; int vol_count; struct ubi_volume *volumes[UBI_MAX_VOLUMES+UBI_INT_VOL_COUNT]; spinlock_t volumes_lock; int ref_count; int image_seq; int rsvd_pebs; int avail_pebs; int beb_rsvd_pebs; int beb_rsvd_level; int bad_peb_limit; int autoresize_vol_id; int vtbl_slots; int vtbl_size; struct ubi_vtbl_record *vtbl; struct mutex device_mutex; int max_ec; /* Note, mean_ec is not updated run-time - should be fixed */ int mean_ec; /* EBA sub-system's stuff */ unsigned long long global_sqnum; spinlock_t ltree_lock; struct rb_root ltree; struct mutex alc_mutex; /* Fastmap stuff */ int fm_disabled; struct ubi_fastmap_layout *fm; struct ubi_fm_pool fm_pool; struct ubi_fm_pool fm_wl_pool; struct rw_semaphore fm_eba_sem; struct rw_semaphore fm_protect; void *fm_buf; size_t fm_size; #ifndef __UBOOT__ struct work_struct fm_work; #endif int fm_work_scheduled; /* Wear-leveling sub-system's stuff */ struct rb_root used; struct rb_root erroneous; struct rb_root free; int free_count; struct rb_root scrub; struct list_head pq[UBI_PROT_QUEUE_LEN]; int pq_head; spinlock_t wl_lock; struct mutex move_mutex; struct rw_semaphore work_sem; int wl_scheduled; struct ubi_wl_entry **lookuptbl; struct ubi_wl_entry *move_from; struct ubi_wl_entry *move_to; int move_to_put; struct list_head works; int works_count; struct task_struct *bgt_thread; int thread_enabled; char bgt_name[sizeof(UBI_BGT_NAME_PATTERN)+2]; /* I/O sub-system's stuff */ long long flash_size; int peb_count; int peb_size; int bad_peb_count; int good_peb_count; int corr_peb_count; int erroneous_peb_count; int max_erroneous; int min_io_size; int hdrs_min_io_size; int ro_mode; int leb_size; int leb_start; int ec_hdr_alsize; int vid_hdr_alsize; int vid_hdr_offset; int vid_hdr_aloffset; int vid_hdr_shift; unsigned int bad_allowed:1; unsigned int nor_flash:1; int max_write_size; struct mtd_info *mtd; void *peb_buf; struct mutex buf_mutex; struct mutex ckvol_mutex; struct ubi_debug_info dbg; }; /** * struct ubi_ainf_peb - attach information about a physical eraseblock. * @ec: erase counter (%UBI_UNKNOWN if it is unknown) * @pnum: physical eraseblock number * @vol_id: ID of the volume this LEB belongs to * @lnum: logical eraseblock number * @scrub: if this physical eraseblock needs scrubbing * @copy_flag: this LEB is a copy (@copy_flag is set in VID header of this LEB) * @sqnum: sequence number * @u: unions RB-tree or @list links * @u.rb: link in the per-volume RB-tree of &struct ubi_ainf_peb objects * @u.list: link in one of the eraseblock lists * * One object of this type is allocated for each physical eraseblock when * attaching an MTD device. Note, if this PEB does not belong to any LEB / * volume, the @vol_id and @lnum fields are initialized to %UBI_UNKNOWN. */ struct ubi_ainf_peb { int ec; int pnum; int vol_id; int lnum; unsigned int scrub:1; unsigned int copy_flag:1; unsigned long long sqnum; union { struct rb_node rb; struct list_head list; } u; }; /** * struct ubi_ainf_volume - attaching information about a volume. * @vol_id: volume ID * @highest_lnum: highest logical eraseblock number in this volume * @leb_count: number of logical eraseblocks in this volume * @vol_type: volume type * @used_ebs: number of used logical eraseblocks in this volume (only for * static volumes) * @last_data_size: amount of data in the last logical eraseblock of this * volume (always equivalent to the usable logical eraseblock * size in case of dynamic volumes) * @data_pad: how many bytes at the end of logical eraseblocks of this volume * are not used (due to volume alignment) * @compat: compatibility flags of this volume * @rb: link in the volume RB-tree * @root: root of the RB-tree containing all the eraseblock belonging to this * volume (&struct ubi_ainf_peb objects) * * One object of this type is allocated for each volume when attaching an MTD * device. */ struct ubi_ainf_volume { int vol_id; int highest_lnum; int leb_count; int vol_type; int used_ebs; int last_data_size; int data_pad; int compat; struct rb_node rb; struct rb_root root; }; /** * struct ubi_attach_info - MTD device attaching information. * @volumes: root of the volume RB-tree * @corr: list of corrupted physical eraseblocks * @free: list of free physical eraseblocks * @erase: list of physical eraseblocks which have to be erased * @alien: list of physical eraseblocks which should not be used by UBI (e.g., * those belonging to "preserve"-compatible internal volumes) * @corr_peb_count: count of PEBs in the @corr list * @empty_peb_count: count of PEBs which are presumably empty (contain only * 0xFF bytes) * @alien_peb_count: count of PEBs in the @alien list * @bad_peb_count: count of bad physical eraseblocks * @maybe_bad_peb_count: count of bad physical eraseblocks which are not marked * as bad yet, but which look like bad * @vols_found: number of volumes found * @highest_vol_id: highest volume ID * @is_empty: flag indicating whether the MTD device is empty or not * @min_ec: lowest erase counter value * @max_ec: highest erase counter value * @max_sqnum: highest sequence number value * @mean_ec: mean erase counter value * @ec_sum: a temporary variable used when calculating @mean_ec * @ec_count: a temporary variable used when calculating @mean_ec * @aeb_slab_cache: slab cache for &struct ubi_ainf_peb objects * * This data structure contains the result of attaching an MTD device and may * be used by other UBI sub-systems to build final UBI data structures, further * error-recovery and so on. */ struct ubi_attach_info { struct rb_root volumes; struct list_head corr; struct list_head free; struct list_head erase; struct list_head alien; int corr_peb_count; int empty_peb_count; int alien_peb_count; int bad_peb_count; int maybe_bad_peb_count; int vols_found; int highest_vol_id; int is_empty; int min_ec; int max_ec; unsigned long long max_sqnum; int mean_ec; uint64_t ec_sum; int ec_count; struct kmem_cache *aeb_slab_cache; }; /** * struct ubi_work - UBI work description data structure. * @list: a link in the list of pending works * @func: worker function * @e: physical eraseblock to erase * @vol_id: the volume ID on which this erasure is being performed * @lnum: the logical eraseblock number * @torture: if the physical eraseblock has to be tortured * @anchor: produce a anchor PEB to by used by fastmap * * The @func pointer points to the worker function. If the @shutdown argument is * not zero, the worker has to free the resources and exit immediately as the * WL sub-system is shutting down. * The worker has to return zero in case of success and a negative error code in * case of failure. */ struct ubi_work { struct list_head list; int (*func)(struct ubi_device *ubi, struct ubi_work *wrk, int shutdown); /* The below fields are only relevant to erasure works */ struct ubi_wl_entry *e; int vol_id; int lnum; int torture; int anchor; }; #include "debug.h" extern struct kmem_cache *ubi_wl_entry_slab; extern const struct file_operations ubi_ctrl_cdev_operations; extern const struct file_operations ubi_cdev_operations; extern const struct file_operations ubi_vol_cdev_operations; extern struct class ubi_class; extern struct mutex ubi_devices_mutex; extern struct blocking_notifier_head ubi_notifiers; /* attach.c */ int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum, int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips); struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai, int vol_id); void ubi_remove_av(struct ubi_attach_info *ai, struct ubi_ainf_volume *av); struct ubi_ainf_peb *ubi_early_get_peb(struct ubi_device *ubi, struct ubi_attach_info *ai); int ubi_attach(struct ubi_device *ubi, int force_scan); void ubi_destroy_ai(struct ubi_attach_info *ai); /* vtbl.c */ int ubi_change_vtbl_record(struct ubi_device *ubi, int idx, struct ubi_vtbl_record *vtbl_rec); int ubi_vtbl_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list); int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_attach_info *ai); /* vmt.c */ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req); int ubi_remove_volume(struct ubi_volume_desc *desc, int no_vtbl); int ubi_resize_volume(struct ubi_volume_desc *desc, int reserved_pebs); int ubi_rename_volumes(struct ubi_device *ubi, struct list_head *rename_list); int ubi_add_volume(struct ubi_device *ubi, struct ubi_volume *vol); void ubi_free_volume(struct ubi_device *ubi, struct ubi_volume *vol); /* upd.c */ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes); int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, const void __user *buf, int count); int ubi_start_leb_change(struct ubi_device *ubi, struct ubi_volume *vol, const struct ubi_leb_change_req *req); int ubi_more_leb_change_data(struct ubi_device *ubi, struct ubi_volume *vol, const void __user *buf, int count); /* misc.c */ int ubi_calc_data_len(const struct ubi_device *ubi, const void *buf, int length); int ubi_check_volume(struct ubi_device *ubi, int vol_id); void ubi_update_reserved(struct ubi_device *ubi); void ubi_calculate_reserved(struct ubi_device *ubi); int ubi_check_pattern(const void *buf, uint8_t patt, int size); /* gluebi.c */ #ifdef CONFIG_MTD_UBI_GLUEBI int ubi_create_gluebi(struct ubi_device *ubi, struct ubi_volume *vol); int ubi_destroy_gluebi(struct ubi_volume *vol); void ubi_gluebi_updated(struct ubi_volume *vol); #else #define ubi_create_gluebi(ubi, vol) 0 static inline int ubi_destroy_gluebi(struct ubi_volume *vol) { return 0; } #define ubi_gluebi_updated(vol) #endif /* eba.c */ int ubi_eba_unmap_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum); int ubi_eba_read_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, void *buf, int offset, int len, int check); int ubi_eba_read_leb_sg(struct ubi_device *ubi, struct ubi_volume *vol, struct ubi_sgl *sgl, int lnum, int offset, int len, int check); int ubi_eba_write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, const void *buf, int offset, int len); int ubi_eba_write_leb_st(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, const void *buf, int len, int used_ebs); int ubi_eba_atomic_leb_change(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, const void *buf, int len); int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, struct ubi_vid_hdr *vid_hdr); int ubi_eba_init(struct ubi_device *ubi, struct ubi_attach_info *ai); unsigned long long ubi_next_sqnum(struct ubi_device *ubi); int self_check_eba(struct ubi_device *ubi, struct ubi_attach_info *ai_fastmap, struct ubi_attach_info *ai_scan); /* wl.c */ int ubi_wl_get_peb(struct ubi_device *ubi); int ubi_wl_put_peb(struct ubi_device *ubi, int vol_id, int lnum, int pnum, int torture); int ubi_wl_flush(struct ubi_device *ubi, int vol_id, int lnum); int ubi_wl_scrub_peb(struct ubi_device *ubi, int pnum); int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai); void ubi_wl_close(struct ubi_device *ubi); int ubi_thread(void *u); struct ubi_wl_entry *ubi_wl_get_fm_peb(struct ubi_device *ubi, int anchor); int ubi_wl_put_fm_peb(struct ubi_device *ubi, struct ubi_wl_entry *used_e, int lnum, int torture); int ubi_is_erase_work(struct ubi_work *wrk); void ubi_refill_pools(struct ubi_device *ubi); int ubi_ensure_anchor_pebs(struct ubi_device *ubi); /* io.c */ int ubi_io_read(const struct ubi_device *ubi, void *buf, int pnum, int offset, int len); int ubi_io_write(struct ubi_device *ubi, const void *buf, int pnum, int offset, int len); int ubi_io_sync_erase(struct ubi_device *ubi, int pnum, int torture); int ubi_io_is_bad(const struct ubi_device *ubi, int pnum); int ubi_io_mark_bad(const struct ubi_device *ubi, int pnum); int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum, struct ubi_ec_hdr *ec_hdr, int verbose); int ubi_io_write_ec_hdr(struct ubi_device *ubi, int pnum, struct ubi_ec_hdr *ec_hdr); int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum, struct ubi_vid_hdr *vid_hdr, int verbose); int ubi_io_write_vid_hdr(struct ubi_device *ubi, int pnum, struct ubi_vid_hdr *vid_hdr); /* build.c */ int ubi_attach_mtd_dev(struct mtd_info *mtd, int ubi_num, int vid_hdr_offset, int max_beb_per1024); int ubi_detach_mtd_dev(int ubi_num, int anyway); struct ubi_device *ubi_get_device(int ubi_num); void ubi_put_device(struct ubi_device *ubi); struct ubi_device *ubi_get_by_major(int major); int ubi_major2num(int major); int ubi_volume_notify(struct ubi_device *ubi, struct ubi_volume *vol, int ntype); int ubi_notify_all(struct ubi_device *ubi, int ntype, struct notifier_block *nb); int ubi_enumerate_volumes(struct notifier_block *nb); void ubi_free_internal_volumes(struct ubi_device *ubi); /* kapi.c */ void ubi_do_get_device_info(struct ubi_device *ubi, struct ubi_device_info *di); void ubi_do_get_volume_info(struct ubi_device *ubi, struct ubi_volume *vol, struct ubi_volume_info *vi); /* scan.c */ int ubi_compare_lebs(struct ubi_device *ubi, const struct ubi_ainf_peb *aeb, int pnum, const struct ubi_vid_hdr *vid_hdr); /* fastmap.c */ #ifdef CONFIG_MTD_UBI_FASTMAP size_t ubi_calc_fm_size(struct ubi_device *ubi); int ubi_update_fastmap(struct ubi_device *ubi); int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai, int fm_anchor); #else static inline int ubi_update_fastmap(struct ubi_device *ubi) { return 0; } #endif /* block.c */ #ifdef CONFIG_MTD_UBI_BLOCK int ubiblock_init(void); void ubiblock_exit(void); int ubiblock_create(struct ubi_volume_info *vi); int ubiblock_remove(struct ubi_volume_info *vi); #else static inline int ubiblock_init(void) { return 0; } static inline void ubiblock_exit(void) {} static inline int ubiblock_create(struct ubi_volume_info *vi) { return -ENOSYS; } static inline int ubiblock_remove(struct ubi_volume_info *vi) { return -ENOSYS; } #endif /* * ubi_for_each_free_peb - walk the UBI free RB tree. * @ubi: UBI device description object * @e: a pointer to a ubi_wl_entry to use as cursor * @pos: a pointer to RB-tree entry type to use as a loop counter */ #define ubi_for_each_free_peb(ubi, e, tmp_rb) \ ubi_rb_for_each_entry((tmp_rb), (e), &(ubi)->free, u.rb) /* * ubi_for_each_used_peb - walk the UBI used RB tree. * @ubi: UBI device description object * @e: a pointer to a ubi_wl_entry to use as cursor * @pos: a pointer to RB-tree entry type to use as a loop counter */ #define ubi_for_each_used_peb(ubi, e, tmp_rb) \ ubi_rb_for_each_entry((tmp_rb), (e), &(ubi)->used, u.rb) /* * ubi_for_each_scub_peb - walk the UBI scub RB tree. * @ubi: UBI device description object * @e: a pointer to a ubi_wl_entry to use as cursor * @pos: a pointer to RB-tree entry type to use as a loop counter */ #define ubi_for_each_scrub_peb(ubi, e, tmp_rb) \ ubi_rb_for_each_entry((tmp_rb), (e), &(ubi)->scrub, u.rb) /* * ubi_for_each_protected_peb - walk the UBI protection queue. * @ubi: UBI device description object * @i: a integer used as counter * @e: a pointer to a ubi_wl_entry to use as cursor */ #define ubi_for_each_protected_peb(ubi, i, e) \ for ((i) = 0; (i) < UBI_PROT_QUEUE_LEN; (i)++) \ list_for_each_entry((e), &(ubi->pq[(i)]), u.list) /* * ubi_rb_for_each_entry - walk an RB-tree. * @rb: a pointer to type 'struct rb_node' to use as a loop counter * @pos: a pointer to RB-tree entry type to use as a loop counter * @root: RB-tree's root * @member: the name of the 'struct rb_node' within the RB-tree entry */ #define ubi_rb_for_each_entry(rb, pos, root, member) \ for (rb = rb_first(root), \ pos = (rb ? container_of(rb, typeof(*pos), member) : NULL); \ rb; \ rb = rb_next(rb), \ pos = (rb ? container_of(rb, typeof(*pos), member) : NULL)) /* * ubi_move_aeb_to_list - move a PEB from the volume tree to a list. * * @av: volume attaching information * @aeb: attaching eraseblock information * @list: the list to move to */ static inline void ubi_move_aeb_to_list(struct ubi_ainf_volume *av, struct ubi_ainf_peb *aeb, struct list_head *list) { rb_erase(&aeb->u.rb, &av->root); list_add_tail(&aeb->u.list, list); } /** * ubi_zalloc_vid_hdr - allocate a volume identifier header object. * @ubi: UBI device description object * @gfp_flags: GFP flags to allocate with * * This function returns a pointer to the newly allocated and zero-filled * volume identifier header object in case of success and %NULL in case of * failure. */ static inline struct ubi_vid_hdr * ubi_zalloc_vid_hdr(const struct ubi_device *ubi, gfp_t gfp_flags) { void *vid_hdr; vid_hdr = kzalloc(ubi->vid_hdr_alsize, gfp_flags); if (!vid_hdr) return NULL; /* * VID headers may be stored at un-aligned flash offsets, so we shift * the pointer. */ return vid_hdr + ubi->vid_hdr_shift; } /** * ubi_free_vid_hdr - free a volume identifier header object. * @ubi: UBI device description object * @vid_hdr: the object to free */ static inline void ubi_free_vid_hdr(const struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr) { void *p = vid_hdr; if (!p) return; kfree(p - ubi->vid_hdr_shift); } /* * This function is equivalent to 'ubi_io_read()', but @offset is relative to * the beginning of the logical eraseblock, not to the beginning of the * physical eraseblock. */ static inline int ubi_io_read_data(const struct ubi_device *ubi, void *buf, int pnum, int offset, int len) { ubi_assert(offset >= 0); return ubi_io_read(ubi, buf, pnum, offset + ubi->leb_start, len); } /* * This function is equivalent to 'ubi_io_write()', but @offset is relative to * the beginning of the logical eraseblock, not to the beginning of the * physical eraseblock. */ static inline int ubi_io_write_data(struct ubi_device *ubi, const void *buf, int pnum, int offset, int len) { ubi_assert(offset >= 0); return ubi_io_write(ubi, buf, pnum, offset + ubi->leb_start, len); } /** * ubi_ro_mode - switch to read-only mode. * @ubi: UBI device description object */ static inline void ubi_ro_mode(struct ubi_device *ubi) { if (!ubi->ro_mode) { ubi->ro_mode = 1; ubi_warn(ubi, "switch to read-only mode"); dump_stack(); } } /** * vol_id2idx - get table index by volume ID. * @ubi: UBI device description object * @vol_id: volume ID */ static inline int vol_id2idx(const struct ubi_device *ubi, int vol_id) { if (vol_id >= UBI_INTERNAL_VOL_START) return vol_id - UBI_INTERNAL_VOL_START + ubi->vtbl_slots; else return vol_id; } /** * idx2vol_id - get volume ID by table index. * @ubi: UBI device description object * @idx: table index */ static inline int idx2vol_id(const struct ubi_device *ubi, int idx) { if (idx >= ubi->vtbl_slots) return idx - ubi->vtbl_slots + UBI_INTERNAL_VOL_START; else return idx; } #ifdef __UBOOT__ int do_work(struct ubi_device *ubi); #endif #endif /* !__UBI_UBI_H__ */