/* * LPC32xx I2C interface driver * * (C) Copyright 2014-2015 DENX Software Engineering GmbH * Written-by: Albert ARIBAUD - 3ADEV * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #include /* * Provide default speed and slave if target did not */ #if !defined(CONFIG_SYS_I2C_LPC32XX_SPEED) #define CONFIG_SYS_I2C_LPC32XX_SPEED 350000 #endif #if !defined(CONFIG_SYS_I2C_LPC32XX_SLAVE) #define CONFIG_SYS_I2C_LPC32XX_SLAVE 0 #endif /* i2c register set */ struct lpc32xx_i2c_registers { union { u32 rx; u32 tx; }; u32 stat; u32 ctrl; u32 clk_hi; u32 clk_lo; u32 adr; u32 rxfl; u32 txfl; u32 rxb; u32 txb; u32 stx; u32 stxfl; }; /* TX register fields */ #define LPC32XX_I2C_TX_START 0x00000100 #define LPC32XX_I2C_TX_STOP 0x00000200 /* Control register values */ #define LPC32XX_I2C_SOFT_RESET 0x00000100 /* Status register values */ #define LPC32XX_I2C_STAT_TFF 0x00000400 #define LPC32XX_I2C_STAT_RFE 0x00000200 #define LPC32XX_I2C_STAT_DRMI 0x00000008 #define LPC32XX_I2C_STAT_NAI 0x00000004 #define LPC32XX_I2C_STAT_TDI 0x00000001 static struct lpc32xx_i2c_registers *lpc32xx_i2c[] = { (struct lpc32xx_i2c_registers *)I2C1_BASE, (struct lpc32xx_i2c_registers *)I2C2_BASE, (struct lpc32xx_i2c_registers *)(USB_BASE + 0x300) }; /* Set I2C bus speed */ static unsigned int lpc32xx_i2c_set_bus_speed(struct i2c_adapter *adap, unsigned int speed) { int half_period; if (speed == 0) return -EINVAL; /* OTG I2C clock source and CLK registers are different */ if (adap->hwadapnr == 2) { half_period = (get_periph_clk_rate() / speed) / 2; if (half_period > 0xFF) return -EINVAL; } else { half_period = (get_hclk_clk_rate() / speed) / 2; if (half_period > 0x3FF) return -EINVAL; } writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_hi); writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_lo); return 0; } /* I2C init called by cmd_i2c when doing 'i2c reset'. */ static void _i2c_init(struct i2c_adapter *adap, int requested_speed, int slaveadd) { struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; /* soft reset (auto-clears) */ writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); /* set HI and LO periods for half of the default speed */ lpc32xx_i2c_set_bus_speed(adap, requested_speed); } /* I2C probe called by cmd_i2c when doing 'i2c probe'. */ static int lpc32xx_i2c_probe(struct i2c_adapter *adap, u8 dev) { struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; int stat; /* Soft-reset the controller */ writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET) ; /* Addre slave for write with start before and stop after */ writel((dev<<1) | LPC32XX_I2C_TX_START | LPC32XX_I2C_TX_STOP, &i2c->tx); /* wait for end of transation */ while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* was there no acknowledge? */ return (stat & LPC32XX_I2C_STAT_NAI) ? -1 : 0; } /* * I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c * Begin write, send address byte(s), begin read, receive data bytes, end. */ static int lpc32xx_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, int alen, u8 *data, int length) { struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; int stat, wlen; /* Soft-reset the controller */ writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET) ; /* do we need to write an address at all? */ if (alen) { /* Address slave in write mode */ writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx); /* write address bytes */ while (alen--) { /* compute address byte + stop for the last one */ int a = (addr >> (8 * alen)) & 0xff; if (!alen) a |= LPC32XX_I2C_TX_STOP; /* Send address byte */ writel(a, &i2c->tx); } /* wait for end of transation */ while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* clear end-of-transaction flag */ writel(1, &i2c->stat); } /* do we have to read data at all? */ if (length) { /* Address slave in read mode */ writel(1 | (dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx); wlen = length; /* get data */ while (length | wlen) { /* read status for TFF and RFE */ stat = readl(&i2c->stat); /* must we, can we write a trigger byte? */ if ((wlen > 0) & (!(stat & LPC32XX_I2C_STAT_TFF))) { wlen--; /* write trigger byte + stop if last */ writel(wlen ? 0 : LPC32XX_I2C_TX_STOP, &i2c->tx); } /* must we, can we read a data byte? */ if ((length > 0) & (!(stat & LPC32XX_I2C_STAT_RFE))) { length--; /* read byte */ *(data++) = readl(&i2c->rx); } } /* wait for end of transation */ while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* clear end-of-transaction flag */ writel(1, &i2c->stat); } /* success */ return 0; } /* * I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c * Begin write, send address byte(s), send data bytes, end. */ static int lpc32xx_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, int alen, u8 *data, int length) { struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr]; int stat; /* Soft-reset the controller */ writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl); while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET) ; /* do we need to write anything at all? */ if (alen | length) /* Address slave in write mode */ writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx); else return 0; /* write address bytes */ while (alen) { /* wait for transmit fifo not full */ stat = readl(&i2c->stat); if (!(stat & LPC32XX_I2C_STAT_TFF)) { alen--; int a = (addr >> (8 * alen)) & 0xff; if (!(alen | length)) a |= LPC32XX_I2C_TX_STOP; /* Send address byte */ writel(a, &i2c->tx); } } while (length) { /* wait for transmit fifo not full */ stat = readl(&i2c->stat); if (!(stat & LPC32XX_I2C_STAT_TFF)) { /* compute data byte, add stop if length==0 */ length--; int d = *(data++); if (!length) d |= LPC32XX_I2C_TX_STOP; /* Send data byte */ writel(d, &i2c->tx); } } /* wait for end of transation */ while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI)) ; /* clear end-of-transaction flag */ writel(1, &i2c->stat); return 0; } U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_0, _i2c_init, lpc32xx_i2c_probe, lpc32xx_i2c_read, lpc32xx_i2c_write, lpc32xx_i2c_set_bus_speed, CONFIG_SYS_I2C_LPC32XX_SPEED, CONFIG_SYS_I2C_LPC32XX_SLAVE, 0) U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_1, _i2c_init, lpc32xx_i2c_probe, lpc32xx_i2c_read, lpc32xx_i2c_write, lpc32xx_i2c_set_bus_speed, CONFIG_SYS_I2C_LPC32XX_SPEED, CONFIG_SYS_I2C_LPC32XX_SLAVE, 1) U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_2, _i2c_init, NULL, lpc32xx_i2c_read, lpc32xx_i2c_write, lpc32xx_i2c_set_bus_speed, 100000, 0, 2)