/* * (C) Copyright 2009 Samsung Electronics * Minkyu Kang * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #define S5P_GPIO_GET_PIN(x) (x % GPIO_PER_BANK) #define CON_MASK(x) (0xf << ((x) << 2)) #define CON_SFR(x, v) ((v) << ((x) << 2)) #define DAT_MASK(x) (0x1 << (x)) #define DAT_SET(x) (0x1 << (x)) #define PULL_MASK(x) (0x3 << ((x) << 1)) #define PULL_MODE(x, v) ((v) << ((x) << 1)) #define DRV_MASK(x) (0x3 << ((x) << 1)) #define DRV_SET(x, m) ((m) << ((x) << 1)) #define RATE_MASK(x) (0x1 << (x + 16)) #define RATE_SET(x) (0x1 << (x + 16)) #define name_to_gpio(n) s5p_name_to_gpio(n) static inline int s5p_name_to_gpio(const char *name) { unsigned num, irregular_set_number, irregular_bank_base; const struct gpio_name_num_table *tabp; char this_bank, bank_name, irregular_bank_name; char *endp; /* * The gpio name starts with either 'g' or 'gp' followed by the bank * name character. Skip one or two characters depending on the prefix. */ if (name[0] == 'g' && name[1] == 'p') name += 2; else if (name[0] == 'g') name++; else return -1; /* Name must start with 'g' */ bank_name = *name++; if (!*name) return -1; /* At least one digit is required/expected. */ /* * On both exynos5 and exynos5420 architectures there is a bank of * GPIOs which does not fall into the regular address pattern. Those * banks are c4 on Exynos5 and y7 on Exynos5420. The rest of the below * assignments help to handle these irregularities. */ #if defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) if (cpu_is_exynos5()) { if (proid_is_exynos5420()) { tabp = exynos5420_gpio_table; irregular_bank_name = 'y'; irregular_set_number = '7'; irregular_bank_base = EXYNOS5420_GPIO_Y70; } else { tabp = exynos5_gpio_table; irregular_bank_name = 'c'; irregular_set_number = '4'; irregular_bank_base = EXYNOS5_GPIO_C40; } } else { if (proid_is_exynos4412()) tabp = exynos4x12_gpio_table; else tabp = exynos4_gpio_table; irregular_bank_name = 0; irregular_set_number = 0; irregular_bank_base = 0; } #else if (cpu_is_s5pc110()) tabp = s5pc110_gpio_table; else tabp = s5pc100_gpio_table; irregular_bank_name = 0; irregular_set_number = 0; irregular_bank_base = 0; #endif this_bank = tabp->bank; do { if (bank_name == this_bank) { unsigned pin_index; /* pin number within the bank */ if ((bank_name == irregular_bank_name) && (name[0] == irregular_set_number)) { pin_index = name[1] - '0'; /* Irregular sets have 8 pins. */ if (pin_index >= GPIO_PER_BANK) return -1; num = irregular_bank_base + pin_index; } else { pin_index = simple_strtoul(name, &endp, 8); pin_index -= tabp->bank_offset; /* * Sanity check: bunk 'z' has no set number, * for all other banks there must be exactly * two octal digits, and the resulting number * should not exceed the number of pins in the * bank. */ if (((bank_name != 'z') && !name[1]) || *endp || (pin_index >= tabp->bank_size)) return -1; num = tabp->base + pin_index; } return num; } this_bank = (++tabp)->bank; } while (this_bank); return -1; } static void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg) { unsigned int value; value = readl(&bank->con); value &= ~CON_MASK(gpio); value |= CON_SFR(gpio, cfg); writel(value, &bank->con); } static void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en) { unsigned int value; value = readl(&bank->dat); value &= ~DAT_MASK(gpio); if (en) value |= DAT_SET(gpio); writel(value, &bank->dat); } static void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en) { s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_OUTPUT); s5p_gpio_set_value(bank, gpio, en); } static void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio) { s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_INPUT); } static unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio) { unsigned int value; value = readl(&bank->dat); return !!(value & DAT_MASK(gpio)); } static void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode) { unsigned int value; value = readl(&bank->pull); value &= ~PULL_MASK(gpio); switch (mode) { case S5P_GPIO_PULL_DOWN: case S5P_GPIO_PULL_UP: value |= PULL_MODE(gpio, mode); break; default: break; } writel(value, &bank->pull); } static void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode) { unsigned int value; value = readl(&bank->drv); value &= ~DRV_MASK(gpio); switch (mode) { case S5P_GPIO_DRV_1X: case S5P_GPIO_DRV_2X: case S5P_GPIO_DRV_3X: case S5P_GPIO_DRV_4X: value |= DRV_SET(gpio, mode); break; default: return; } writel(value, &bank->drv); } static void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode) { unsigned int value; value = readl(&bank->drv); value &= ~RATE_MASK(gpio); switch (mode) { case S5P_GPIO_DRV_FAST: case S5P_GPIO_DRV_SLOW: value |= RATE_SET(gpio); break; default: return; } writel(value, &bank->drv); } struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned int gpio) { const struct gpio_info *data; unsigned int upto; int i, count; data = get_gpio_data(); count = get_bank_num(); upto = 0; for (i = 0; i < count; i++) { debug("i=%d, upto=%d\n", i, upto); if (gpio < data->max_gpio) { struct s5p_gpio_bank *bank; bank = (struct s5p_gpio_bank *)data->reg_addr; bank += (gpio - upto) / GPIO_PER_BANK; debug("gpio=%d, bank=%p\n", gpio, bank); return bank; } upto = data->max_gpio; data++; } return NULL; } int s5p_gpio_get_pin(unsigned gpio) { return S5P_GPIO_GET_PIN(gpio); } /* Common GPIO API */ int gpio_request(unsigned gpio, const char *label) { return 0; } int gpio_free(unsigned gpio) { return 0; } int gpio_direction_input(unsigned gpio) { s5p_gpio_direction_input(s5p_gpio_get_bank(gpio), s5p_gpio_get_pin(gpio)); return 0; } int gpio_direction_output(unsigned gpio, int value) { s5p_gpio_direction_output(s5p_gpio_get_bank(gpio), s5p_gpio_get_pin(gpio), value); return 0; } int gpio_get_value(unsigned gpio) { return (int) s5p_gpio_get_value(s5p_gpio_get_bank(gpio), s5p_gpio_get_pin(gpio)); } int gpio_set_value(unsigned gpio, int value) { s5p_gpio_set_value(s5p_gpio_get_bank(gpio), s5p_gpio_get_pin(gpio), value); return 0; } void gpio_set_pull(int gpio, int mode) { s5p_gpio_set_pull(s5p_gpio_get_bank(gpio), s5p_gpio_get_pin(gpio), mode); } void gpio_set_drv(int gpio, int mode) { s5p_gpio_set_drv(s5p_gpio_get_bank(gpio), s5p_gpio_get_pin(gpio), mode); } void gpio_cfg_pin(int gpio, int cfg) { s5p_gpio_cfg_pin(s5p_gpio_get_bank(gpio), s5p_gpio_get_pin(gpio), cfg); } void gpio_set_rate(int gpio, int mode) { s5p_gpio_set_rate(s5p_gpio_get_bank(gpio), s5p_gpio_get_pin(gpio), mode); }