/****************************************************************************** * * Author: Xilinx, Inc. * * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING * ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND * FITNESS FOR A PARTICULAR PURPOSE. * * * Xilinx hardware products are not intended for use in life support * appliances, devices, or systems. Use in such applications is * expressly prohibited. * * * (c) Copyright 2002-2004 Xilinx Inc. * All rights reserved. * * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. * ******************************************************************************/ /*****************************************************************************/ /** * * @file xstatus.h * * This file contains Xilinx software status codes. Status codes have their * own data type called XStatus. These codes are used throughout the Xilinx * device drivers. * ******************************************************************************/ #ifndef XSTATUS_H /* prevent circular inclusions */ #define XSTATUS_H /* by using protection macros */ /***************************** Include Files *********************************/ #include "xbasic_types.h" /************************** Constant Definitions *****************************/ /*********************** Common statuses 0 - 500 *****************************/ #define XST_SUCCESS 0L #define XST_FAILURE 1L #define XST_DEVICE_NOT_FOUND 2L #define XST_DEVICE_BLOCK_NOT_FOUND 3L #define XST_INVALID_VERSION 4L #define XST_DEVICE_IS_STARTED 5L #define XST_DEVICE_IS_STOPPED 6L #define XST_FIFO_ERROR 7L /* an error occurred during an operation with a FIFO such as an underrun or overrun, this error requires the device to be reset */ #define XST_RESET_ERROR 8L /* an error occurred which requires the device to be reset */ #define XST_DMA_ERROR 9L /* a DMA error occurred, this error typically requires the device using the DMA to be reset */ #define XST_NOT_POLLED 10L /* the device is not configured for polled mode operation */ #define XST_FIFO_NO_ROOM 11L /* a FIFO did not have room to put the specified data into */ #define XST_BUFFER_TOO_SMALL 12L /* the buffer is not large enough to hold the expected data */ #define XST_NO_DATA 13L /* there was no data available */ #define XST_REGISTER_ERROR 14L /* a register did not contain the expected value */ #define XST_INVALID_PARAM 15L /* an invalid parameter was passed into the function */ #define XST_NOT_SGDMA 16L /* the device is not configured for scatter-gather DMA operation */ #define XST_LOOPBACK_ERROR 17L /* a loopback test failed */ #define XST_NO_CALLBACK 18L /* a callback has not yet been * registered */ #define XST_NO_FEATURE 19L /* device is not configured with * the requested feature */ #define XST_NOT_INTERRUPT 20L /* device is not configured for * interrupt mode operation */ #define XST_DEVICE_BUSY 21L /* device is busy */ #define XST_ERROR_COUNT_MAX 22L /* the error counters of a device * have maxed out */ #define XST_IS_STARTED 23L /* used when part of device is * already started i.e. * sub channel */ #define XST_IS_STOPPED 24L /* used when part of device is * already stopped i.e. * sub channel */ /***************** Utility Component statuses 401 - 500 *********************/ #define XST_MEMTEST_FAILED 401L /* memory test failed */ /***************** Common Components statuses 501 - 1000 *********************/ /********************* Packet Fifo statuses 501 - 510 ************************/ #define XST_PFIFO_LACK_OF_DATA 501L /* not enough data in FIFO */ #define XST_PFIFO_NO_ROOM 502L /* not enough room in FIFO */ #define XST_PFIFO_BAD_REG_VALUE 503L /* self test, a register value was invalid after reset */ /************************** DMA statuses 511 - 530 ***************************/ #define XST_DMA_TRANSFER_ERROR 511L /* self test, DMA transfer failed */ #define XST_DMA_RESET_REGISTER_ERROR 512L /* self test, a register value was invalid after reset */ #define XST_DMA_SG_LIST_EMPTY 513L /* scatter gather list contains no buffer descriptors ready to be processed */ #define XST_DMA_SG_IS_STARTED 514L /* scatter gather not stopped */ #define XST_DMA_SG_IS_STOPPED 515L /* scatter gather not running */ #define XST_DMA_SG_LIST_FULL 517L /* all the buffer desciptors of the scatter gather list are being used */ #define XST_DMA_SG_BD_LOCKED 518L /* the scatter gather buffer descriptor which is to be copied over in the scatter list is locked */ #define XST_DMA_SG_NOTHING_TO_COMMIT 519L /* no buffer descriptors have been put into the scatter gather list to be commited */ #define XST_DMA_SG_COUNT_EXCEEDED 521L /* the packet count threshold specified was larger than the total # of buffer descriptors in the scatter gather list */ #define XST_DMA_SG_LIST_EXISTS 522L /* the scatter gather list has already been created */ #define XST_DMA_SG_NO_LIST 523L /* no scatter gather list has been created */ #define XST_DMA_SG_BD_NOT_COMMITTED 524L /* the buffer descriptor which was being started was not committed to the list */ #define XST_DMA_SG_NO_DATA 525L /* the buffer descriptor to start has already been used by the hardware so it can't be reused */ /************************** IPIF statuses 531 - 550 ***************************/ #define XST_IPIF_REG_WIDTH_ERROR 531L /* an invalid register width was passed into the function */ #define XST_IPIF_RESET_REGISTER_ERROR 532L /* the value of a register at reset was not valid */ #define XST_IPIF_DEVICE_STATUS_ERROR 533L /* a write to the device interrupt status register did not read back correctly */ #define XST_IPIF_DEVICE_ACK_ERROR 534L /* the device interrupt status register did not reset when acked */ #define XST_IPIF_DEVICE_ENABLE_ERROR 535L /* the device interrupt enable register was not updated when other registers changed */ #define XST_IPIF_IP_STATUS_ERROR 536L /* a write to the IP interrupt status register did not read back correctly */ #define XST_IPIF_IP_ACK_ERROR 537L /* the IP interrupt status register did not reset when acked */ #define XST_IPIF_IP_ENABLE_ERROR 538L /* IP interrupt enable register was not updated correctly when other registers changed */ #define XST_IPIF_DEVICE_PENDING_ERROR 539L /* The device interrupt pending register did not indicate the expected value */ #define XST_IPIF_DEVICE_ID_ERROR 540L /* The device interrupt ID register did not indicate the expected value */ /****************** Device specific statuses 1001 - 4095 *********************/ /********************* Ethernet statuses 1001 - 1050 *************************/ #define XST_EMAC_MEMORY_SIZE_ERROR 1001L /* Memory space is not big enough * to hold the minimum number of * buffers or descriptors */ #define XST_EMAC_MEMORY_ALLOC_ERROR 1002L /* Memory allocation failed */ #define XST_EMAC_MII_READ_ERROR 1003L /* MII read error */ #define XST_EMAC_MII_BUSY 1004L /* An MII operation is in progress */ #define XST_EMAC_OUT_OF_BUFFERS 1005L /* Adapter is out of buffers */ #define XST_EMAC_PARSE_ERROR 1006L /* Invalid adapter init string */ #define XST_EMAC_COLLISION_ERROR 1007L /* Excess deferral or late * collision on polled send */ /*********************** UART statuses 1051 - 1075 ***************************/ #define XST_UART #define XST_UART_INIT_ERROR 1051L #define XST_UART_START_ERROR 1052L #define XST_UART_CONFIG_ERROR 1053L #define XST_UART_TEST_FAIL 1054L #define XST_UART_BAUD_ERROR 1055L #define XST_UART_BAUD_RANGE 1056L /************************ IIC statuses 1076 - 1100 ***************************/ #define XST_IIC_SELFTEST_FAILED 1076 /* self test failed */ #define XST_IIC_BUS_BUSY 1077 /* bus found busy */ #define XST_IIC_GENERAL_CALL_ADDRESS 1078 /* mastersend attempted with */ /* general call address */ #define XST_IIC_STAND_REG_RESET_ERROR 1079 /* A non parameterizable reg */ /* value after reset not valid */ #define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080 /* Tx fifo included in design */ /* value after reset not valid */ #define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081 /* Rx fifo included in design */ /* value after reset not valid */ #define XST_IIC_TBA_REG_RESET_ERROR 1082 /* 10 bit addr incl in design */ /* value after reset not valid */ #define XST_IIC_CR_READBACK_ERROR 1083 /* Read of the control register */ /* didn't return value written */ #define XST_IIC_DTR_READBACK_ERROR 1084 /* Read of the data Tx reg */ /* didn't return value written */ #define XST_IIC_DRR_READBACK_ERROR 1085 /* Read of the data Receive reg */ /* didn't return value written */ #define XST_IIC_ADR_READBACK_ERROR 1086 /* Read of the data Tx reg */ /* didn't return value written */ #define XST_IIC_TBA_READBACK_ERROR 1087 /* Read of the 10 bit addr reg */ /* didn't return written value */ #define XST_IIC_NOT_SLAVE 1088 /* The device isn't a slave */ /*********************** ATMC statuses 1101 - 1125 ***************************/ #define XST_ATMC_ERROR_COUNT_MAX 1101L /* the error counters in the ATM controller hit the max value which requires the statistics to be cleared */ /*********************** Flash statuses 1126 - 1150 **************************/ #define XST_FLASH_BUSY 1126L /* Flash is erasing or programming */ #define XST_FLASH_READY 1127L /* Flash is ready for commands */ #define XST_FLASH_ERROR 1128L /* Flash had detected an internal error. Use XFlash_DeviceControl to retrieve device specific codes */ #define XST_FLASH_ERASE_SUSPENDED 1129L /* Flash is in suspended erase state */ #define XST_FLASH_WRITE_SUSPENDED 1130L /* Flash is in suspended write state */ #define XST_FLASH_PART_NOT_SUPPORTED 1131L /* Flash type not supported by driver */ #define XST_FLASH_NOT_SUPPORTED 1132L /* Operation not supported */ #define XST_FLASH_TOO_MANY_REGIONS 1133L /* Too many erase regions */ #define XST_FLASH_TIMEOUT_ERROR 1134L /* Programming or erase operation aborted due to a timeout */ #define XST_FLASH_ADDRESS_ERROR 1135L /* Accessed flash outside its addressible range */ #define XST_FLASH_ALIGNMENT_ERROR 1136L /* Write alignment error */ #define XST_FLASH_BLOCKING_CALL_ERROR 1137L /* Couldn't return immediately from write/erase function with XFL_NON_BLOCKING_WRITE/ERASE option cleared */ #define XST_FLASH_CFI_QUERY_ERROR 1138L /* Failed to query the device */ /*********************** SPI statuses 1151 - 1175 ****************************/ #define XST_SPI_MODE_FAULT 1151 /* master was selected as slave */ #define XST_SPI_TRANSFER_DONE 1152 /* data transfer is complete */ #define XST_SPI_TRANSMIT_UNDERRUN 1153 /* slave underruns transmit register */ #define XST_SPI_RECEIVE_OVERRUN 1154 /* device overruns receive register */ #define XST_SPI_NO_SLAVE 1155 /* no slave has been selected yet */ #define XST_SPI_TOO_MANY_SLAVES 1156 /* more than one slave is being * selected */ #define XST_SPI_NOT_MASTER 1157 /* operation is valid only as master */ #define XST_SPI_SLAVE_ONLY 1158 /* device is configured as slave-only */ #define XST_SPI_SLAVE_MODE_FAULT 1159 /* slave was selected while disabled */ /********************** OPB Arbiter statuses 1176 - 1200 *********************/ #define XST_OPBARB_INVALID_PRIORITY 1176 /* the priority registers have either * one master assigned to two or more * priorities, or one master not * assigned to any priority */ #define XST_OPBARB_NOT_SUSPENDED 1177 /* an attempt was made to modify the * priority levels without first * suspending the use of priority * levels */ #define XST_OPBARB_PARK_NOT_ENABLED 1178 /* bus parking by id was enabled but * bus parking was not enabled */ #define XST_OPBARB_NOT_FIXED_PRIORITY 1179 /* the arbiter must be in fixed * priority mode to allow the * priorities to be changed */ /************************ Intc statuses 1201 - 1225 **************************/ #define XST_INTC_FAIL_SELFTEST 1201 /* self test failed */ #define XST_INTC_CONNECT_ERROR 1202 /* interrupt already in use */ /********************** TmrCtr statuses 1226 - 1250 **************************/ #define XST_TMRCTR_TIMER_FAILED 1226 /* self test failed */ /********************** WdtTb statuses 1251 - 1275 ***************************/ #define XST_WDTTB_TIMER_FAILED 1251L /********************** PlbArb statuses 1276 - 1300 **************************/ #define XST_PLBARB_FAIL_SELFTEST 1276L /********************** Plb2Opb statuses 1301 - 1325 *************************/ #define XST_PLB2OPB_FAIL_SELFTEST 1301L /********************** Opb2Plb statuses 1326 - 1350 *************************/ #define XST_OPB2PLB_FAIL_SELFTEST 1326L /********************** SysAce statuses 1351 - 1360 **************************/ #define XST_SYSACE_NO_LOCK 1351L /* No MPU lock has been granted */ /********************** PCI Bridge statuses 1361 - 1375 **********************/ #define XST_PCI_INVALID_ADDRESS 1361L /**************************** Type Definitions *******************************/ /** * The status typedef. */ typedef u32 XStatus; /***************** Macros (Inline Functions) Definitions *********************/ /************************** Function Prototypes ******************************/ #endif /* end of protection macro */