/* * (C) Copyright 2008 Wolfgang Grandegger * * (C) Copyright 2006 * Thomas Waehner, TQ-Systems GmbH, thomas.waehner@tqs.de. * * (C) Copyright 2005 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * Copyright 2004 Freescale Semiconductor. * (C) Copyright 2002,2003, Motorola Inc. * Xianghua Xiao, (X.Xiao@motorola.com) * * (C) Copyright 2002 Scott McNutt * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[]; /* FLASH chips info */ void local_bus_init (void); ulong flash_get_size (ulong base, int banknum); #ifdef CONFIG_PS2MULT void ps2mult_early_init (void); #endif #ifdef CONFIG_CPM2 /* * I/O Port configuration table * * if conf is 1, then that port pin will be configured at boot time * according to the five values podr/pdir/ppar/psor/pdat for that entry */ const iop_conf_t iop_conf_tab[4][32] = { /* Port A: conf, ppar, psor, pdir, podr, pdat */ { {1, 1, 1, 0, 0, 0}, /* PA31: FCC1 MII COL */ {1, 1, 1, 0, 0, 0}, /* PA30: FCC1 MII CRS */ {1, 1, 1, 1, 0, 0}, /* PA29: FCC1 MII TX_ER */ {1, 1, 1, 1, 0, 0}, /* PA28: FCC1 MII TX_EN */ {1, 1, 1, 0, 0, 0}, /* PA27: FCC1 MII RX_DV */ {1, 1, 1, 0, 0, 0}, /* PA26: FCC1 MII RX_ER */ {0, 1, 0, 1, 0, 0}, /* PA25: FCC1 ATMTXD[0] */ {0, 1, 0, 1, 0, 0}, /* PA24: FCC1 ATMTXD[1] */ {0, 1, 0, 1, 0, 0}, /* PA23: FCC1 ATMTXD[2] */ {0, 1, 0, 1, 0, 0}, /* PA22: FCC1 ATMTXD[3] */ {1, 1, 0, 1, 0, 0}, /* PA21: FCC1 MII TxD[3] */ {1, 1, 0, 1, 0, 0}, /* PA20: FCC1 MII TxD[2] */ {1, 1, 0, 1, 0, 0}, /* PA19: FCC1 MII TxD[1] */ {1, 1, 0, 1, 0, 0}, /* PA18: FCC1 MII TxD[0] */ {1, 1, 0, 0, 0, 0}, /* PA17: FCC1 MII RxD[0] */ {1, 1, 0, 0, 0, 0}, /* PA16: FCC1 MII RxD[1] */ {1, 1, 0, 0, 0, 0}, /* PA15: FCC1 MII RxD[2] */ {1, 1, 0, 0, 0, 0}, /* PA14: FCC1 MII RxD[3] */ {0, 1, 0, 0, 0, 0}, /* PA13: FCC1 ATMRXD[3] */ {0, 1, 0, 0, 0, 0}, /* PA12: FCC1 ATMRXD[2] */ {0, 1, 0, 0, 0, 0}, /* PA11: FCC1 ATMRXD[1] */ {0, 1, 0, 0, 0, 0}, /* PA10: FCC1 ATMRXD[0] */ {0, 1, 1, 1, 0, 0}, /* PA9 : FCC1 L1TXD */ {0, 1, 1, 0, 0, 0}, /* PA8 : FCC1 L1RXD */ {0, 0, 0, 1, 0, 0}, /* PA7 : PA7 */ {0, 1, 1, 1, 0, 0}, /* PA6 : TDM A1 L1RSYNC */ {0, 0, 0, 1, 0, 0}, /* PA5 : PA5 */ {0, 0, 0, 1, 0, 0}, /* PA4 : PA4 */ {0, 0, 0, 1, 0, 0}, /* PA3 : PA3 */ {0, 0, 0, 1, 0, 0}, /* PA2 : PA2 */ {0, 0, 0, 0, 0, 0}, /* PA1 : FREERUN */ {0, 0, 0, 1, 0, 0} /* PA0 : PA0 */ }, /* Port B: conf, ppar, psor, pdir, podr, pdat */ { {1, 1, 0, 1, 0, 0}, /* PB31: FCC2 MII TX_ER */ {1, 1, 0, 0, 0, 0}, /* PB30: FCC2 MII RX_DV */ {1, 1, 1, 1, 0, 0}, /* PB29: FCC2 MII TX_EN */ {1, 1, 0, 0, 0, 0}, /* PB28: FCC2 MII RX_ER */ {1, 1, 0, 0, 0, 0}, /* PB27: FCC2 MII COL */ {1, 1, 0, 0, 0, 0}, /* PB26: FCC2 MII CRS */ {1, 1, 0, 1, 0, 0}, /* PB25: FCC2 MII TxD[3] */ {1, 1, 0, 1, 0, 0}, /* PB24: FCC2 MII TxD[2] */ {1, 1, 0, 1, 0, 0}, /* PB23: FCC2 MII TxD[1] */ {1, 1, 0, 1, 0, 0}, /* PB22: FCC2 MII TxD[0] */ {1, 1, 0, 0, 0, 0}, /* PB21: FCC2 MII RxD[0] */ {1, 1, 0, 0, 0, 0}, /* PB20: FCC2 MII RxD[1] */ {1, 1, 0, 0, 0, 0}, /* PB19: FCC2 MII RxD[2] */ {1, 1, 0, 0, 0, 0}, /* PB18: FCC2 MII RxD[3] */ {1, 1, 0, 0, 0, 0}, /* PB17: FCC3:RX_DIV */ {1, 1, 0, 0, 0, 0}, /* PB16: FCC3:RX_ERR */ {1, 1, 0, 1, 0, 0}, /* PB15: FCC3:TX_ERR */ {1, 1, 0, 1, 0, 0}, /* PB14: FCC3:TX_EN */ {1, 1, 0, 0, 0, 0}, /* PB13: FCC3:COL */ {1, 1, 0, 0, 0, 0}, /* PB12: FCC3:CRS */ {1, 1, 0, 0, 0, 0}, /* PB11: FCC3:RXD */ {1, 1, 0, 0, 0, 0}, /* PB10: FCC3:RXD */ {1, 1, 0, 0, 0, 0}, /* PB9 : FCC3:RXD */ {1, 1, 0, 0, 0, 0}, /* PB8 : FCC3:RXD */ {1, 1, 0, 1, 0, 0}, /* PB7 : FCC3:TXD */ {1, 1, 0, 1, 0, 0}, /* PB6 : FCC3:TXD */ {1, 1, 0, 1, 0, 0}, /* PB5 : FCC3:TXD */ {1, 1, 0, 1, 0, 0}, /* PB4 : FCC3:TXD */ {0, 0, 0, 0, 0, 0}, /* PB3 : pin doesn't exist */ {0, 0, 0, 0, 0, 0}, /* PB2 : pin doesn't exist */ {0, 0, 0, 0, 0, 0}, /* PB1 : pin doesn't exist */ {0, 0, 0, 0, 0, 0} /* PB0 : pin doesn't exist */ }, /* Port C: conf, ppar, psor, pdir, podr, pdat */ { {0, 0, 0, 1, 0, 0}, /* PC31: PC31 */ {0, 0, 0, 1, 0, 0}, /* PC30: PC30 */ {0, 1, 1, 0, 0, 0}, /* PC29: SCC1 EN *CLSN */ {0, 0, 0, 1, 0, 0}, /* PC28: PC28 */ {0, 0, 0, 1, 0, 0}, /* PC27: UART Clock in */ {0, 0, 0, 1, 0, 0}, /* PC26: PC26 */ {0, 0, 0, 1, 0, 0}, /* PC25: PC25 */ {0, 0, 0, 1, 0, 0}, /* PC24: PC24 */ {0, 1, 0, 1, 0, 0}, /* PC23: ATMTFCLK */ {0, 1, 0, 0, 0, 0}, /* PC22: ATMRFCLK */ {1, 1, 0, 0, 0, 0}, /* PC21: SCC1 EN RXCLK */ {1, 1, 0, 0, 0, 0}, /* PC20: SCC1 EN TXCLK */ {1, 1, 0, 0, 0, 0}, /* PC19: FCC2 MII RX_CLK CLK13 */ {1, 1, 0, 0, 0, 0}, /* PC18: FCC Tx Clock (CLK14) */ {1, 1, 0, 0, 0, 0}, /* PC17: PC17 */ {1, 1, 0, 0, 0, 0}, /* PC16: FCC Tx Clock (CLK16) */ {0, 1, 0, 0, 0, 0}, /* PC15: PC15 */ {0, 1, 0, 0, 0, 0}, /* PC14: SCC1 EN *CD */ {0, 1, 0, 0, 0, 0}, /* PC13: PC13 */ {0, 1, 0, 1, 0, 0}, /* PC12: PC12 */ {0, 0, 0, 1, 0, 0}, /* PC11: LXT971 transmit control */ {0, 0, 0, 1, 0, 0}, /* PC10: FETHMDC */ {0, 0, 0, 0, 0, 0}, /* PC9 : FETHMDIO */ {0, 0, 0, 1, 0, 0}, /* PC8 : PC8 */ {0, 0, 0, 1, 0, 0}, /* PC7 : PC7 */ {0, 0, 0, 1, 0, 0}, /* PC6 : PC6 */ {0, 0, 0, 1, 0, 0}, /* PC5 : PC5 */ {0, 0, 0, 1, 0, 0}, /* PC4 : PC4 */ {0, 0, 0, 1, 0, 0}, /* PC3 : PC3 */ {0, 0, 0, 1, 0, 1}, /* PC2 : ENET FDE */ {0, 0, 0, 1, 0, 0}, /* PC1 : ENET DSQE */ {0, 0, 0, 1, 0, 0}, /* PC0 : ENET LBK */ }, /* Port D: conf, ppar, psor, pdir, podr, pdat */ { #ifdef CONFIG_TQM8560 {1, 1, 0, 0, 0, 0}, /* PD31: SCC1 EN RxD */ {1, 1, 1, 1, 0, 0}, /* PD30: SCC1 EN TxD */ {1, 1, 0, 1, 0, 0}, /* PD29: SCC1 EN TENA */ #else /* !CONFIG_TQM8560 */ {0, 0, 0, 0, 0, 0}, /* PD31: PD31 */ {0, 0, 0, 0, 0, 0}, /* PD30: PD30 */ {0, 0, 0, 0, 0, 0}, /* PD29: PD29 */ #endif /* CONFIG_TQM8560 */ {1, 1, 0, 0, 0, 0}, /* PD28: PD28 */ {1, 1, 0, 1, 0, 0}, /* PD27: PD27 */ {1, 1, 0, 1, 0, 0}, /* PD26: PD26 */ {0, 0, 0, 1, 0, 0}, /* PD25: PD25 */ {0, 0, 0, 1, 0, 0}, /* PD24: PD24 */ {0, 0, 0, 1, 0, 0}, /* PD23: PD23 */ {0, 0, 0, 1, 0, 0}, /* PD22: PD22 */ {0, 0, 0, 1, 0, 0}, /* PD21: PD21 */ {0, 0, 0, 1, 0, 0}, /* PD20: PD20 */ {0, 0, 0, 1, 0, 0}, /* PD19: PD19 */ {0, 0, 0, 1, 0, 0}, /* PD18: PD18 */ {0, 1, 0, 0, 0, 0}, /* PD17: FCC1 ATMRXPRTY */ {0, 1, 0, 1, 0, 0}, /* PD16: FCC1 ATMTXPRTY */ {0, 1, 1, 0, 1, 0}, /* PD15: I2C SDA */ {0, 0, 0, 1, 0, 0}, /* PD14: LED */ {0, 0, 0, 0, 0, 0}, /* PD13: PD13 */ {0, 0, 0, 0, 0, 0}, /* PD12: PD12 */ {0, 0, 0, 0, 0, 0}, /* PD11: PD11 */ {0, 0, 0, 0, 0, 0}, /* PD10: PD10 */ {0, 1, 0, 1, 0, 0}, /* PD9 : SMC1 TXD */ {0, 1, 0, 0, 0, 0}, /* PD8 : SMC1 RXD */ {0, 0, 0, 1, 0, 1}, /* PD7 : PD7 */ {0, 0, 0, 1, 0, 1}, /* PD6 : PD6 */ {0, 0, 0, 1, 0, 1}, /* PD5 : PD5 */ {0, 0, 0, 1, 0, 1}, /* PD4 : PD4 */ {0, 0, 0, 0, 0, 0}, /* PD3 : pin doesn't exist */ {0, 0, 0, 0, 0, 0}, /* PD2 : pin doesn't exist */ {0, 0, 0, 0, 0, 0}, /* PD1 : pin doesn't exist */ {0, 0, 0, 0, 0, 0} /* PD0 : pin doesn't exist */ } }; #endif /* CONFIG_CPM2 */ #define CASL_STRING1 "casl=xx" #define CASL_STRING2 "casl=" static const int casl_table[] = { 20, 25, 30 }; #define N_CASL (sizeof(casl_table) / sizeof(casl_table[0])) int cas_latency (void) { char buf[128]; int casl; int val; int i; casl = CONFIG_DDR_DEFAULT_CL; i = getenv_f("serial#", buf, sizeof(buf)); if (i >0) { if (strncmp(buf + strlen (buf) - strlen (CASL_STRING1), CASL_STRING2, strlen (CASL_STRING2)) == 0) { val = simple_strtoul (buf + strlen (buf) - 2, NULL, 10); for (i = 0; i < N_CASL; ++i) { if (val == casl_table[i]) { return val; } } } } return casl; } int checkboard (void) { char buf[64]; int i = getenv_f("serial#", buf, sizeof(buf)); printf ("Board: %s", CONFIG_BOARDNAME); if (i > 0) { puts(", serial# "); puts(buf); } putc ('\n'); /* * Initialize local bus. */ local_bus_init (); return 0; } int misc_init_r (void) { /* * Adjust flash start and offset to detected values */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; /* * Recalculate CS configuration if second FLASH bank is available */ if (flash_info[0].size > 0) { set_lbc_or(1, ((-flash_info[0].size) & 0xffff8000) | (CONFIG_SYS_OR1_PRELIM & 0x00007fff)); set_lbc_br(1, gd->bd->bi_flashstart | (CONFIG_SYS_BR1_PRELIM & 0x00007fff)); /* * Re-check to get correct base address for bank 1 */ flash_get_size (gd->bd->bi_flashstart, 0); } else { set_lbc_or(1, 0); set_lbc_br(1, 0); } /* * If bank 1 is equipped, bank 0 is mapped after bank 1 */ set_lbc_or(0, ((-flash_info[1].size) & 0xffff8000) | (CONFIG_SYS_OR0_PRELIM & 0x00007fff)); set_lbc_br(0, (gd->bd->bi_flashstart + flash_info[0].size) | (CONFIG_SYS_BR0_PRELIM & 0x00007fff)); /* * Re-check to get correct base address for bank 0 */ flash_get_size (gd->bd->bi_flashstart + flash_info[0].size, 1); /* * Re-do flash protection upon new addresses */ flash_protect (FLAG_PROTECT_CLEAR, gd->bd->bi_flashstart, 0xffffffff, &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); /* Monitor protection ON by default */ flash_protect (FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, 0xffffffff, &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); /* Environment protection ON by default */ flash_protect (FLAG_PROTECT_SET, CONFIG_ENV_ADDR, CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); #ifdef CONFIG_ENV_ADDR_REDUND /* Redundant environment protection ON by default */ flash_protect (FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, &flash_info[CONFIG_SYS_MAX_FLASH_BANKS - 1]); #endif return 0; } #ifdef CONFIG_CAN_DRIVER /* * Initialize UPMC RAM */ static void upmc_write (u_char addr, uint val) { volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; out_be32 (&lbc->mdr, val); clrsetbits_be32(&lbc->mcmr, MxMR_MAD_MSK, MxMR_OP_WARR | (addr & MxMR_MAD_MSK)); /* dummy access to perform write */ out_8 ((void __iomem *)CONFIG_SYS_CAN_BASE, 0); /* normal operation */ clrbits_be32(&lbc->mcmr, MxMR_OP_WARR); } #endif /* CONFIG_CAN_DRIVER */ uint get_lbc_clock (void) { volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; sys_info_t sys_info; ulong clkdiv = lbc->lcrr & LCRR_CLKDIV; get_sys_info (&sys_info); if (clkdiv == 2 || clkdiv == 4 || clkdiv == 8) { #ifdef CONFIG_MPC8548 /* * Yes, the entire PQ38 family use the same * bit-representation for twice the clock divider value. */ clkdiv *= 2; #endif return sys_info.freqSystemBus / clkdiv; } puts("Invalid clock divider value in CONFIG_SYS_LBC_LCRR\n"); return 0; } /* * Initialize Local Bus */ void local_bus_init (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint lbc_mhz = get_lbc_clock () / 1000000; #ifdef CONFIG_MPC8548 uint svr = get_svr (); uint lcrr; /* * MPC revision < 2.0 * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU1: * Modify engineering use only register at address 0xE_0F20. * "1. Read register at offset 0xE_0F20 * 2. And value with 0x0000_FFFF * 3. OR result with 0x0000_0004 * 4. Write result back to offset 0xE_0F20." * * According to MPC8548E_Device_Errata Rev. L, Erratum LBIU2: * Modify engineering use only register at address 0xE_0F20. * "1. Read register at offset 0xE_0F20 * 2. And value with 0xFFFF_FFDF * 3. Write result back to offset 0xE_0F20." * * Since it is the same register, we do the modification in one step. */ if (SVR_MAJ (svr) < 2) { uint dummy = gur->lbiuiplldcr1; dummy &= 0x0000FFDF; dummy |= 0x00000004; gur->lbiuiplldcr1 = dummy; } lcrr = CONFIG_SYS_LBC_LCRR; /* * Local Bus Clock > 83.3 MHz. According to timing * specifications set LCRR[EADC] to 2 delay cycles. */ if (lbc_mhz > 83) { lcrr &= ~LCRR_EADC; lcrr |= LCRR_EADC_2; } /* * According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30 * disable PLL bypass for Local Bus Clock > 83 MHz. */ if (lbc_mhz >= 66) lcrr &= (~LCRR_DBYP); /* DLL Enabled */ else lcrr |= LCRR_DBYP; /* DLL Bypass */ lbc->lcrr = lcrr; asm ("sync;isync;msync"); /* * According to MPC8548ERMAD Rev.1.3 read back LCRR * and terminate with isync */ lcrr = lbc->lcrr; asm ("isync;"); /* let DLL stabilize */ udelay (500); #else /* !CONFIG_MPC8548 */ /* * Errata LBC11. * Fix Local Bus clock glitch when DLL is enabled. * * If localbus freq is < 66MHz, DLL bypass mode must be used. * If localbus freq is > 133MHz, DLL can be safely enabled. * Between 66 and 133, the DLL is enabled with an override workaround. */ if (lbc_mhz < 66) { lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */ lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTEDR_WARA | LTEDR_RAWA | LTEDR_CSD; /* Disable all error checking */ } else if (lbc_mhz >= 133) { lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */ } else { /* * On REV1 boards, need to change CLKDIV before enable DLL. * Default CLKDIV is 8, change it to 4 temporarily. */ uint pvr = get_pvr (); uint temp_lbcdll = 0; if (pvr == PVR_85xx_REV1) { /* FIXME: Justify the high bit here. */ lbc->lcrr = 0x10000004; } lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */ udelay (200); /* * Sample LBC DLL ctrl reg, upshift it to set the * override bits. */ temp_lbcdll = gur->lbcdllcr; gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000); asm ("sync;isync;msync"); } #endif /* !CONFIG_MPC8548 */ #ifdef CONFIG_CAN_DRIVER /* * According to timing specifications EAD must be * set if Local Bus Clock is > 83 MHz. */ if (lbc_mhz > 83) set_lbc_or(2, CONFIG_SYS_OR2_CAN | OR_UPM_EAD); else set_lbc_or(2, CONFIG_SYS_OR2_CAN); set_lbc_br(2, CONFIG_SYS_BR2_CAN); /* LGPL4 is UPWAIT */ out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X); /* Initialize UPMC for CAN: single read */ upmc_write (0x00, 0xFFFFED00); upmc_write (0x01, 0xCCFFCC00); upmc_write (0x02, 0x00FFCF00); upmc_write (0x03, 0x00FFCF00); upmc_write (0x04, 0x00FFDC00); upmc_write (0x05, 0x00FFCF00); upmc_write (0x06, 0x00FFED00); upmc_write (0x07, 0x3FFFCC07); /* Initialize UPMC for CAN: single write */ upmc_write (0x18, 0xFFFFED00); upmc_write (0x19, 0xCCFFEC00); upmc_write (0x1A, 0x00FFED80); upmc_write (0x1B, 0x00FFED80); upmc_write (0x1C, 0x00FFFC00); upmc_write (0x1D, 0x0FFFEC00); upmc_write (0x1E, 0x0FFFEF00); upmc_write (0x1F, 0x3FFFEC05); #endif /* CONFIG_CAN_DRIVER */ } /* * Initialize PCI Devices, report devices found. */ #ifdef CONFIG_PCI1 static struct pci_controller pci1_hose; #endif /* CONFIG_PCI1 */ void pci_init_board (void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int first_free_busno = 0; #ifdef CONFIG_PCI1 struct fsl_pci_info pci_info; int pcie_ep; u32 devdisr = in_be32(&gur->devdisr); uint pci_32 = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_PCI32; uint pci_arb = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_ARB; uint pci_speed = CONFIG_SYS_CLK_FREQ; /* PCI PSPEED in [4:5] */ uint pci_clk_sel = in_be32(&gur->porpllsr) & MPC85xx_PORDEVSR_PCI1_SPD; if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { SET_STD_PCI_INFO(pci_info, 1); set_next_law(pci_info.mem_phys, law_size_bits(pci_info.mem_size), pci_info.law); set_next_law(pci_info.io_phys, law_size_bits(pci_info.io_size), pci_info.law); pcie_ep = fsl_setup_hose(&pci1_hose, pci_info.regs); printf("PCI1: %d bit, %s MHz, %s, %s, %s\n", (pci_32) ? 32 : 64, (pci_speed == 33333333) ? "33" : (pci_speed == 66666666) ? "66" : "unknown", pci_clk_sel ? "sync" : "async", pcie_ep ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter"); first_free_busno = fsl_pci_init_port(&pci_info, &pci1_hose, first_free_busno); #ifdef CONFIG_PCIX_CHECK if (!(in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1)) { ushort reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; uint dev = PCI_BDF(0, 0, 0); /* PCI-X init */ if (CONFIG_SYS_CLK_FREQ < 66000000) puts ("PCI-X will only work at 66 MHz\n"); pci_write_config_word(dev, PCIX_COMMAND, reg16); } #endif } else { printf("PCI1: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); #endif fsl_pcie_init_board(first_free_busno); } #ifdef CONFIG_OF_BOARD_SETUP void ft_board_setup (void *blob, bd_t *bd) { ft_cpu_setup (blob, bd); FT_FSL_PCI_SETUP; } #endif /* CONFIG_OF_BOARD_SETUP */ #ifdef CONFIG_BOARD_EARLY_INIT_R int board_early_init_r (void) { #ifdef CONFIG_PS2MULT ps2mult_early_init (); #endif /* CONFIG_PS2MULT */ return (0); } #endif /* CONFIG_BOARD_EARLY_INIT_R */ int board_eth_init(bd_t *bis) { cpu_eth_init(bis); /* Intialize TSECs first */ return pci_eth_init(bis); }