/* * * (C) Copyright 2002 * Daniel Engström, Omicron Ceti AB . * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; /* * Theory: * We first set up all IRQs to be non-pci, edge triggered, * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets * called we reallocate irqs to the pci bus with sc520_pci_set_irq() * as needed. Whe choose the irqs to gram from a configurable list * inside pci_sc520_fixup_irq() (If this list contains stupid irq's * such as 0 thngas will not work) */ static void irq_init(void) { /* disable global interrupt mode */ write_mmcr_byte(SC520_PICICR, 0x40); /* set all irqs to edge */ write_mmcr_byte(SC520_MPICMODE, 0x00); write_mmcr_byte(SC520_SL1PICMODE, 0x00); write_mmcr_byte(SC520_SL2PICMODE, 0x00); /* active low polarity on PIC interrupt pins, * active high polarity on all other irq pins */ write_mmcr_word(SC520_INTPINPOL, 0x0000); /* set irq number mapping */ write_mmcr_byte(SC520_GPTMR0MAP, SC520_IRQ_DISABLED); /* disable GP timer 0 INT */ write_mmcr_byte(SC520_GPTMR1MAP, SC520_IRQ_DISABLED); /* disable GP timer 1 INT */ write_mmcr_byte(SC520_GPTMR2MAP, SC520_IRQ_DISABLED); /* disable GP timer 2 INT */ write_mmcr_byte(SC520_PIT0MAP, SC520_IRQ0); /* Set PIT timer 0 INT to IRQ0 */ write_mmcr_byte(SC520_PIT1MAP, SC520_IRQ_DISABLED); /* disable PIT timer 1 INT */ write_mmcr_byte(SC520_PIT2MAP, SC520_IRQ_DISABLED); /* disable PIT timer 2 INT */ write_mmcr_byte(SC520_PCIINTAMAP, SC520_IRQ_DISABLED); /* disable PCI INT A */ write_mmcr_byte(SC520_PCIINTBMAP, SC520_IRQ_DISABLED); /* disable PCI INT B */ write_mmcr_byte(SC520_PCIINTCMAP, SC520_IRQ_DISABLED); /* disable PCI INT C */ write_mmcr_byte(SC520_PCIINTDMAP, SC520_IRQ_DISABLED); /* disable PCI INT D */ write_mmcr_byte(SC520_DMABCINTMAP, SC520_IRQ_DISABLED); /* disable DMA INT */ write_mmcr_byte(SC520_SSIMAP, SC520_IRQ6); /* Set Synchronius serial INT to IRQ6*/ write_mmcr_byte(SC520_WDTMAP, SC520_IRQ_DISABLED); /* disable Watchdog INT */ write_mmcr_byte(SC520_RTCMAP, SC520_IRQ8); /* Set RTC int to 8 */ write_mmcr_byte(SC520_WPVMAP, SC520_IRQ_DISABLED); /* disable write protect INT */ write_mmcr_byte(SC520_ICEMAP, SC520_IRQ1); /* Set ICE Debug Serielport INT to IRQ1 */ write_mmcr_byte(SC520_FERRMAP,SC520_IRQ13); /* Set FP error INT to IRQ13 */ write_mmcr_byte(SC520_UART1MAP, SC520_IRQ4); /* Set internal UART2 INT to IRQ4 */ write_mmcr_byte(SC520_UART2MAP, SC520_IRQ3); /* Set internal UART2 INT to IRQ3 */ write_mmcr_byte(SC520_GP0IMAP, SC520_IRQ7); /* Set GPIRQ0 (PC-Card AUX IRQ) to IRQ7 */ write_mmcr_byte(SC520_GP1IMAP, SC520_IRQ14); /* Set GPIRQ1 (CF IRQ) to IRQ14 */ write_mmcr_byte(SC520_GP3IMAP, SC520_IRQ5); /* Set GPIRQ3 ( CAN IRQ ) ti IRQ5 */ write_mmcr_byte(SC520_GP4IMAP, SC520_IRQ_DISABLED); /* disbale GIRQ4 ( IRR IRQ ) */ write_mmcr_byte(SC520_GP5IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ5 */ write_mmcr_byte(SC520_GP6IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ6 */ write_mmcr_byte(SC520_GP7IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ7 */ write_mmcr_byte(SC520_GP8IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ8 */ write_mmcr_byte(SC520_GP9IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ9 */ write_mmcr_byte(SC520_GP2IMAP, SC520_IRQ_DISABLED); /* disable GPIRQ2 */ write_mmcr_byte(SC520_GP10IMAP,SC520_IRQ_DISABLED); /* disable GPIRQ10 */ write_mmcr_word(SC520_PCIHOSTMAP, 0x11f); /* Map PCI hostbridge INT to NMI */ write_mmcr_word(SC520_ECCMAP, 0x100); /* Map SDRAM ECC failure INT to NMI */ } /* PCI stuff */ static void pci_sc520_spunk_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { int version = read_mmcr_byte(SC520_SYSINFO); /* a configurable lists of irqs to steal * when we need one (a board with more pci interrupt pins * would use a larger table */ static int irq_list[] = { CFG_FIRST_PCI_IRQ, CFG_SECOND_PCI_IRQ, CFG_THIRD_PCI_IRQ, CFG_FORTH_PCI_IRQ }; static int next_irq_index=0; char tmp_pin; int pin; pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin); pin = tmp_pin; pin-=1; /* pci config space use 1-based numbering */ if (-1 == pin) { return; /* device use no irq */ } /* map device number + pin to a pin on the sc520 */ switch (PCI_DEV(dev)) { case 6: /* ETH0 */ pin+=SC520_PCI_INTA; break; case 7: /* ETH1 */ pin+=SC520_PCI_INTB; break; case 8: /* Crypto */ pin+=SC520_PCI_INTC; break; case 9: /* PMC slot */ pin+=SC520_PCI_INTD; break; case 10: /* PC-Card */ if (version < 10) { pin+=SC520_PCI_INTD; } else { pin+=SC520_PCI_INTC; } break; default: return; } pin&=3; /* wrap around */ if (sc520_pci_ints[pin] == -1) { /* re-route one interrupt for us */ if (next_irq_index > 3) { return; } if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) { return; } next_irq_index++; } if (-1 != sc520_pci_ints[pin]) { pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, sc520_pci_ints[pin]); } #if 0 printf("fixup_irq: device %d pin %c irq %d\n", PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]); #endif } static void pci_sc520_spunk_configure_cardbus(struct pci_controller *hose, pci_dev_t dev, struct pci_config_table *te) { u32 io_base; u32 temp; pciauto_config_device(hose, dev); pci_hose_write_config_word(hose, dev, PCI_COMMAND, 0x07); /* enable device */ pci_hose_write_config_byte(hose, dev, 0x0c, 0x10); /* cacheline size */ pci_hose_write_config_byte(hose, dev, 0x0d, 0x40); /* latency timer */ pci_hose_write_config_byte(hose, dev, 0x1b, 0x40); /* cardbus latency timer */ pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0040); /* reset cardbus */ pci_hose_write_config_word(hose, dev, PCI_BRIDGE_CONTROL, 0x0080); /* route interrupts though ExCA */ pci_hose_write_config_word(hose, dev, 0x44, 0x3e0); /* map legacy I/O port to 0x3e0 */ pci_hose_read_config_dword(hose, dev, 0x80, &temp); /* System control */ pci_hose_write_config_dword(hose, dev, 0x80, temp | 0x60); /* System control: disable clockrun */ /* route MF0 to ~INT and MF3 to IRQ7 * reserve all others */ pci_hose_write_config_dword(hose, dev, 0x8c, 0x00007002); pci_hose_write_config_byte(hose, dev, 0x91, 0x00); /* card control */ pci_hose_write_config_byte(hose, dev, 0x92, 0x62); /* device control */ if (te->device != 0xac56) { pci_hose_write_config_byte(hose, dev, 0x93, 0x21); /* async interrupt enable */ pci_hose_write_config_word(hose, dev, 0xa8, 0x0000); /* reset GPIO */ pci_hose_write_config_word(hose, dev, 0xac, 0x0000); /* reset GPIO */ pci_hose_write_config_word(hose, dev, 0xaa, 0x0000); /* reset GPIO */ pci_hose_write_config_word(hose, dev, 0xae, 0x0000); /* reset GPIO */ } else { pci_hose_write_config_byte(hose, dev, 0x93, 0x20); /* */ } pci_hose_write_config_word(hose, dev, 0xa4, 0x8000); /* reset power management */ pci_hose_read_config_dword(hose, dev, PCI_BASE_ADDRESS_0, &io_base); io_base &= ~0xfL; writeb(0x07, io_base+0x803); /* route CSC irq though ExCA and enable IRQ7 */ writel(0, io_base+0x10); /* CLKRUN default */ writel(0, io_base+0x20); /* CLKRUN default */ } static struct pci_config_table pci_sc520_spunk_config_table[] = { { 0x104c, 0xac50, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} }, { 0x104c, 0xac56, PCI_ANY_ID, 0, 0x0a, 0, pci_sc520_spunk_configure_cardbus, { 0, 0, 0} }, { 0, 0, 0, 0, 0, 0, NULL, {0,0,0}} }; static struct pci_controller sc520_spunk_hose = { fixup_irq: pci_sc520_spunk_fixup_irq, config_table: pci_sc520_spunk_config_table, first_busno: 0x00, last_busno: 0xff, }; void pci_init_board(void) { pci_sc520_init(&sc520_spunk_hose); } /* set up the ISA bus timing and system address mappings */ static void bus_init(void) { /* versions * 0 Hyglo versions 0.95 and 0.96 (large baords) * ?? Hyglo version 0.97 (small board) * 10 Spunk board */ int version = read_mmcr_byte(SC520_SYSINFO); if (version) { /* set up the GP IO pins (for the Spunk board) */ write_mmcr_word(SC520_PIOPFS31_16, 0xfff0); /* set the GPIO pin function 31-16 reg */ write_mmcr_word(SC520_PIOPFS15_0, 0x000f); /* set the GPIO pin function 15-0 reg */ write_mmcr_word(SC520_PIODIR31_16, 0x000f); /* set the GPIO direction 31-16 reg */ write_mmcr_word(SC520_PIODIR15_0, 0x1ff0); /* set the GPIO direction 15-0 reg */ write_mmcr_byte(SC520_CSPFS, 0xc0); /* set the CS pin function reg */ write_mmcr_byte(SC520_CLKSEL, 0x70); write_mmcr_word(SC520_PIOCLR31_16, 0x0003); /* reset SSI chip-selects */ write_mmcr_word(SC520_PIOSET31_16, 0x000c); } else { /* set up the GP IO pins (for the Hyglo board) */ write_mmcr_word(SC520_PIOPFS31_16, 0xffc0); /* set the GPIO pin function 31-16 reg */ write_mmcr_word(SC520_PIOPFS15_0, 0x1e7f); /* set the GPIO pin function 15-0 reg */ write_mmcr_word(SC520_PIODIR31_16, 0x003f); /* set the GPIO direction 31-16 reg */ write_mmcr_word(SC520_PIODIR15_0, 0xe180); /* set the GPIO direction 15-0 reg */ write_mmcr_byte(SC520_CSPFS, 0x00); /* set the CS pin function reg */ write_mmcr_byte(SC520_CLKSEL, 0x70); write_mmcr_word(SC520_PIOCLR15_0, 0x0180); /* reset SSI chip-selects */ } write_mmcr_byte(SC520_GPCSRT, 1); /* set the GP CS offset */ write_mmcr_byte(SC520_GPCSPW, 3); /* set the GP CS pulse width */ write_mmcr_byte(SC520_GPCSOFF, 1); /* set the GP CS offset */ write_mmcr_byte(SC520_GPRDW, 3); /* set the RD pulse width */ write_mmcr_byte(SC520_GPRDOFF, 1); /* set the GP RD offset */ write_mmcr_byte(SC520_GPWRW, 3); /* set the GP WR pulse width */ write_mmcr_byte(SC520_GPWROFF, 1); /* set the GP WR offset */ write_mmcr_word(SC520_BOOTCSCTL, 0x0407); /* set up timing of BOOTCS */ /* adjust the memory map: * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM * and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ /* bootcs */ write_mmcr_long(SC520_PAR12, 0x8bffe800); /* IDE0 = GPCS6 1f0-1f7 */ write_mmcr_long(SC520_PAR3, 0x380801f0); /* IDE1 = GPCS7 3f6 */ write_mmcr_long(SC520_PAR4, 0x3c0003f6); asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) & ~(UART2_DIS|UART1_DIS)); } /* par usage: * PAR0 (legacy_video) * PAR1 (PCI ROM mapping) * PAR2 * PAR3 IDE * PAR4 IDE * PAR5 (legacy_video) * PAR6 * PAR7 (legacy_video) * PAR8 (legacy_video) * PAR9 (legacy_video) * PAR10 * PAR11 (ISAROM) * PAR12 BOOTCS * PAR13 * PAR14 * PAR15 */ /* * This function should map a chunk of size bytes * of the system address space to the ISA bus * * The function will return the memory address * as seen by the host (which may very will be the * same as the bus address) */ u32 isa_map_rom(u32 bus_addr, int size) { u32 par; printf("isa_map_rom asked to map %d bytes at %x\n", size, bus_addr); par = size; if (par < 0x80000) { par = 0x80000; } par >>= 12; par--; par&=0x7f; par <<= 18; par |= (bus_addr>>12); par |= 0x50000000; printf ("setting PAR11 to %x\n", par); /* Map rom 0x10000 with PAR1 */ write_mmcr_long(SC520_PAR11, par); return bus_addr; } /* * this function removed any mapping created * with pci_get_rom_window() */ void isa_unmap_rom(u32 addr) { printf("isa_unmap_rom asked to unmap %x", addr); if ((addr>>12) == (read_mmcr_long(SC520_PAR11)&0x3ffff)) { write_mmcr_long(SC520_PAR11, 0); printf(" done\n"); return; } printf(" not ours\n"); } #ifdef CONFIG_PCI #define PCI_ROM_TEMP_SPACE 0x10000 /* * This function should map a chunk of size bytes * of the system address space to the PCI bus, * suitable to map PCI ROMS (bus address < 16M) * the function will return the host memory address * which should be converted into a bus address * before used to configure the PCI rom address * decoder */ u32 pci_get_rom_window(struct pci_controller *hose, int size) { u32 par; par = size; if (par < 0x80000) { par = 0x80000; } par >>= 16; par--; par&=0x7ff; par <<= 14; par |= (PCI_ROM_TEMP_SPACE>>16); par |= 0x72000000; printf ("setting PAR1 to %x\n", par); /* Map rom 0x10000 with PAR1 */ write_mmcr_long(SC520_PAR1, par); return PCI_ROM_TEMP_SPACE; } /* * this function removed any mapping created * with pci_get_rom_window() */ void pci_remove_rom_window(struct pci_controller *hose, u32 addr) { printf("pci_remove_rom_window: %x", addr); if (addr == PCI_ROM_TEMP_SPACE) { write_mmcr_long(SC520_PAR1, 0); printf(" done\n"); return; } printf(" not ours\n"); } /* * This function is called in order to provide acces to the * legacy video I/O ports on the PCI bus. * After this function accesses to I/O ports 0x3b0-0x3bb and * 0x3c0-0x3df shuld result in transactions on the PCI bus. * */ int pci_enable_legacy_video_ports(struct pci_controller *hose) { /* Map video memory to 0xa0000*/ write_mmcr_long(SC520_PAR0, 0x7200400a); /* forward all I/O accesses to PCI */ write_mmcr_byte(SC520_ADDDECCTL, read_mmcr_byte(SC520_ADDDECCTL) | IO_HOLE_DEST_PCI); /* so we map away all io ports to pci (only way to access pci io * below 0x400. But then we have to map back the portions that we dont * use so that the generate cycles on the GPIO bus where the sio and * ISA slots are connected, this requre the use of several PAR registers */ /* bring 0x100 - 0x2f7 back to ISA using PAR5 */ write_mmcr_long(SC520_PAR5, 0x31f70100); /* com2 use 2f8-2ff */ /* bring 0x300 - 0x3af back to ISA using PAR7 */ write_mmcr_long(SC520_PAR7, 0x30af0300); /* vga use 3b0-3bb */ /* bring 0x3bc - 0x3bf back to ISA using PAR8 */ write_mmcr_long(SC520_PAR8, 0x300303bc); /* vga use 3c0-3df */ /* bring 0x3e0 - 0x3f7 back to ISA using PAR9 */ write_mmcr_long(SC520_PAR9, 0x301703e0); /* com1 use 3f8-3ff */ return 0; } #endif /* * Miscelaneous platform dependent initialisations */ int board_init(void) { init_sc520(); bus_init(); irq_init(); /* max drive current on SDRAM */ write_mmcr_word(SC520_DSCTL, 0x0100); /* enter debug mode after next reset (only if jumper is also set) */ write_mmcr_byte(SC520_RESCFG, 0x08); /* configure the software timer to 33.000MHz */ write_mmcr_byte(SC520_SWTMRCFG, 1); gd->bus_clk = 33000000; return 0; } int dram_init(void) { init_sc520_dram(); return 0; } void show_boot_progress(int val) { int version = read_mmcr_byte(SC520_SYSINFO); if (val < -32) val = -1; /* let things compatible */ if (version == 0) { /* PIO31-PIO16 Data */ write_mmcr_word(SC520_PIODATA31_16, (read_mmcr_word(SC520_PIODATA31_16) & 0xffc0)| ((val&0x7e)>>1)); /* 0x1f8 >> 3 */ /* PIO0-PIO15 Data */ write_mmcr_word(SC520_PIODATA15_0, (read_mmcr_word(SC520_PIODATA15_0) & 0x1fff)| ((val&0x7)<<13)); } else { /* newer boards use PIO4-PIO12 */ /* PIO0-PIO15 Data */ #if 0 val = (val & 0x007) | ((val & 0x038) << 3) | ((val & 0x1c0) >> 3); #else val = (val & 0x007) | ((val & 0x07e) << 2); #endif write_mmcr_word(SC520_PIODATA15_0, (read_mmcr_word(SC520_PIODATA15_0) & 0xe00f) | ((val&0x01ff)<<4)); } } int last_stage_init(void) { int version = read_mmcr_byte(SC520_SYSINFO); printf("Omicron Ceti SC520 Spunk revision %x\n", version); #if 0 if (version) { int x, y; printf("eeprom probe %d\n", spi_eeprom_probe(1)); spi_eeprom_read(1, 0, (u8*)&x, 2); spi_eeprom_read(1, 1, (u8*)&y, 2); printf("eeprom bytes %04x%04x\n", x, y); x ^= 0xffff; y ^= 0xffff; spi_eeprom_write(1, 0, (u8*)&x, 2); spi_eeprom_write(1, 1, (u8*)&y, 2); spi_eeprom_read(1, 0, (u8*)&x, 2); spi_eeprom_read(1, 1, (u8*)&y, 2); printf("eeprom bytes %04x%04x\n", x, y); } else { int x, y; printf("eeprom probe %d\n", mw_eeprom_probe(1)); mw_eeprom_read(1, 0, (u8*)&x, 2); mw_eeprom_read(1, 1, (u8*)&y, 2); printf("eeprom bytes %04x%04x\n", x, y); x ^= 0xffff; y ^= 0xffff; mw_eeprom_write(1, 0, (u8*)&x, 2); mw_eeprom_write(1, 1, (u8*)&y, 2); mw_eeprom_read(1, 0, (u8*)&x, 2); mw_eeprom_read(1, 1, (u8*)&y, 2); printf("eeprom bytes %04x%04x\n", x, y); } #endif ds1722_probe(2); return 0; } void ssi_chip_select(int dev) { int version = read_mmcr_byte(SC520_SYSINFO); if (version) { /* Spunk board: EEPROM and CAN are actove-low, TEMP and AUX are active high */ switch (dev) { case 1: /* EEPROM */ write_mmcr_word(SC520_PIOCLR31_16, 0x0004); break; case 2: /* Temp Probe */ write_mmcr_word(SC520_PIOSET31_16, 0x0002); break; case 3: /* CAN */ write_mmcr_word(SC520_PIOCLR31_16, 0x0008); break; case 4: /* AUX */ write_mmcr_word(SC520_PIOSET31_16, 0x0001); break; case 0: write_mmcr_word(SC520_PIOCLR31_16, 0x0003); write_mmcr_word(SC520_PIOSET31_16, 0x000c); break; default: printf("Illegal SSI device requested: %d\n", dev); } } else { /* Globox board: Both EEPROM and TEMP are active-high */ switch (dev) { case 1: /* EEPROM */ write_mmcr_word(SC520_PIOSET15_0, 0x0100); break; case 2: /* Temp Probe */ write_mmcr_word(SC520_PIOSET15_0, 0x0080); break; case 0: write_mmcr_word(SC520_PIOCLR15_0, 0x0180); break; default: printf("Illegal SSI device requested: %d\n", dev); } } } void spi_init_f(void) { read_mmcr_byte(SC520_SYSINFO) ? spi_eeprom_probe(1) : mw_eeprom_probe(1); } ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) { int offset; int i; offset = 0; for (i=0;i