/* * Copyright 2004 Freescale Semiconductor. * (C) Copyright 2002,2003, Motorola Inc. * Xianghua Xiao, (X.Xiao@motorola.com) * * (C) Copyright 2002 Scott McNutt * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #if defined(CONFIG_DDR_ECC) extern void ddr_enable_ecc(unsigned int dram_size); #endif void local_bus_init(void); void sdram_init(void); long int fixed_sdram(void); int board_early_init_f (void) { #if defined(CONFIG_PCI) volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR); pci->peer &= 0xffffffdf; /* disable master abort */ #endif return 0; } int checkboard (void) { puts("Board: MicroSys PM854\n"); #ifdef CONFIG_PCI printf(" PCI1: 32 bit, %d MHz (compiled)\n", CONFIG_SYS_CLK_FREQ / 1000000); #else printf(" PCI1: disabled\n"); #endif /* * Initialize local bus. */ local_bus_init(); return 0; } phys_size_t initdram(int board_type) { long dram_size = 0; puts("Initializing\n"); #if defined(CONFIG_DDR_DLL) { volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); int i,x; x = 10; /* * Work around to stabilize DDR DLL */ gur->ddrdllcr = 0x81000000; asm("sync;isync;msync"); udelay (200); while (gur->ddrdllcr != 0x81000100) { gur->devdisr = gur->devdisr | 0x00010000; asm("sync;isync;msync"); for (i=0; idevdisr = gur->devdisr & 0xfff7ffff; asm("sync;isync;msync"); x++; } } #endif #if defined(CONFIG_SPD_EEPROM) dram_size = fsl_ddr_sdram(); dram_size = setup_ddr_tlbs(dram_size / 0x100000); dram_size *= 0x100000; #else dram_size = fixed_sdram (); #endif #if defined(CONFIG_DDR_ECC) /* * Initialize and enable DDR ECC. */ ddr_enable_ecc(dram_size); #endif puts(" DDR: "); return dram_size; } /* * Initialize Local Bus */ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); uint clkdiv; uint lbc_hz; sys_info_t sysinfo; /* * Errata LBC11. * Fix Local Bus clock glitch when DLL is enabled. * * If localbus freq is < 66Mhz, DLL bypass mode must be used. * If localbus freq is > 133Mhz, DLL can be safely enabled. * Between 66 and 133, the DLL is enabled with an override workaround. */ get_sys_info(&sysinfo); clkdiv = lbc->lcrr & 0x0f; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { lbc->lcrr = CFG_LBC_LCRR | 0x80000000; /* DLL Bypass */ } else if (lbc_hz >= 133) { lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */ } else { /* * On REV1 boards, need to change CLKDIV before enable DLL. * Default CLKDIV is 8, change it to 4 temporarily. */ uint pvr = get_pvr(); uint temp_lbcdll = 0; if (pvr == PVR_85xx_REV1) { /* FIXME: Justify the high bit here. */ lbc->lcrr = 0x10000004; } lbc->lcrr = CFG_LBC_LCRR & (~0x80000000); /* DLL Enabled */ udelay(200); /* * Sample LBC DLL ctrl reg, upshift it to set the * override bits. */ temp_lbcdll = gur->lbcdllcr; gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000); asm("sync;isync;msync"); } } #if defined(CFG_DRAM_TEST) int testdram (void) { uint *pstart = (uint *) CFG_MEMTEST_START; uint *pend = (uint *) CFG_MEMTEST_END; uint *p; printf("SDRAM test phase 1:\n"); for (p = pstart; p < pend; p++) *p = 0xaaaaaaaa; for (p = pstart; p < pend; p++) { if (*p != 0xaaaaaaaa) { printf ("SDRAM test fails at: %08x\n", (uint) p); return 1; } } printf("SDRAM test phase 2:\n"); for (p = pstart; p < pend; p++) *p = 0x55555555; for (p = pstart; p < pend; p++) { if (*p != 0x55555555) { printf ("SDRAM test fails at: %08x\n", (uint) p); return 1; } } printf("SDRAM test passed.\n"); return 0; } #endif #if !defined(CONFIG_SPD_EEPROM) /************************************************************************* * fixed sdram init -- doesn't use serial presence detect. ************************************************************************/ long int fixed_sdram (void) { #ifndef CFG_RAMBOOT volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); ddr->cs0_bnds = CFG_DDR_CS0_BNDS; ddr->cs0_config = CFG_DDR_CS0_CONFIG; ddr->timing_cfg_1 = CFG_DDR_TIMING_1; ddr->timing_cfg_2 = CFG_DDR_TIMING_2; ddr->sdram_mode = CFG_DDR_MODE; ddr->sdram_interval = CFG_DDR_INTERVAL; #if defined (CONFIG_DDR_ECC) ddr->err_disable = 0x0000000D; ddr->err_sbe = 0x00ff0000; #endif asm("sync;isync;msync"); udelay(500); #if defined (CONFIG_DDR_ECC) /* Enable ECC checking */ ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000); #else ddr->sdram_cfg = CFG_DDR_CONTROL; #endif asm("sync; isync; msync"); udelay(500); #endif return CFG_SDRAM_SIZE * 1024 * 1024; } #endif /* !defined(CONFIG_SPD_EEPROM) */ #if defined(CONFIG_PCI) /* * Initialize PCI Devices, report devices found. */ #ifndef CONFIG_PCI_PNP static struct pci_config_table pci_pm854_config_table[] = { { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_IDSEL_NUMBER, PCI_ANY_ID, pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, PCI_ENET0_MEMADDR, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER } }, { } }; #endif static struct pci_controller hose = { #ifndef CONFIG_PCI_PNP config_table: pci_pm854_config_table, #endif }; #endif /* CONFIG_PCI */ void pci_init_board(void) { #ifdef CONFIG_PCI pci_mpc85xx_init(&hose); #endif /* CONFIG_PCI */ } int board_eth_init(bd_t *bis) { cpu_eth_init(bis); /* Intialize TSECs first */ return pci_eth_init(bis); }