/* * (C) Copyright 2008 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) #include #endif /* * I/O Port configuration table * * if conf is 1, then that port pin will be configured at boot time * according to the five values podr/pdir/ppar/psor/pdat for that entry */ const iop_conf_t iop_conf_tab[4][32] = { /* Port A */ { /* conf ppar psor pdir podr pdat */ /* PA31 */ { 0, 0, 0, 0, 0, 0 }, /* PA31 */ /* PA30 */ { 0, 0, 0, 0, 0, 0 }, /* PA30 */ /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */ /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */ /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */ /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */ /* PA25 */ { 1, 0, 0, 1, 0, 0 }, /* ETH_PWRDWN */ /* PA24 */ { 1, 0, 0, 1, 0, 1 }, /* ETH_RESET */ /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */ /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */ /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */ /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */ /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */ /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */ /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */ /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */ /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */ /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */ /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */ /* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* ETH_SLEEP */ /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */ /* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* MDIO */ /* PA9 */ { 1, 0, 0, 1, 0, 0 }, /* MDC */ /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RxD */ /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */ /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */ /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */ /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */ /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */ /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */ /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */ }, /* Port B */ { /* conf ppar psor pdir podr pdat */ /* PB31 */ { 0, 0, 0, 0, 0, 0 }, /* PB31 */ /* PB30 */ { 0, 0, 0, 0, 0, 0 }, /* PB30 */ /* PB29 */ { 0, 0, 0, 0, 0, 0 }, /* PB29 */ /* PB28 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TxD */ /* PB27 */ { 0, 0, 0, 0, 0, 0 }, /* PB27 */ /* PB26 */ { 0, 0, 0, 0, 0, 0 }, /* PB26 */ /* PB25 */ { 0, 0, 0, 0, 0, 0 }, /* PB25 */ /* PB24 */ { 0, 0, 0, 0, 0, 0 }, /* PB24 */ /* PB23 */ { 0, 0, 0, 0, 0, 0 }, /* PB23 */ /* PB22 */ { 0, 0, 0, 0, 0, 0 }, /* PB22 */ /* PB21 */ { 0, 0, 0, 0, 0, 0 }, /* PB21 */ /* PB20 */ { 0, 0, 0, 0, 0, 0 }, /* PB20 */ /* PB19 */ { 0, 0, 0, 0, 0, 0 }, /* PB19 */ /* PB18 */ { 0, 0, 0, 0, 0, 0 }, /* PB18 */ /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB15 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */ /* PB14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 RxD */ /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB12 */ { 1, 1, 1, 1, 0, 0 }, /* SCC2 TxD */ /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB8 */ { 1, 1, 1, 1, 0, 0 }, /* SCC3 TxD */ /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */ }, /* Port C */ { /* conf ppar psor pdir podr pdat */ /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ /* PC30 */ { 1, 1, 1, 1, 0, 0 }, /* Timer1 OUT */ /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */ /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */ /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */ /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */ /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC RxCLK 11 */ /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC TxCLK 12 */ /* PC19 */ { 0, 0, 0, 0, 0, 0 }, /* PC19 */ /* PC18 */ { 0, 0, 0, 0, 0, 0 }, /* PC18 */ /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */ /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */ /* PC15 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TxD */ /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ /* PC12 */ { 1, 0, 0, 1, 0, 0 }, /* TX OUTPUT SLEW1 */ /* PC11 */ { 1, 0, 0, 1, 0, 0 }, /* TX OUTPUT SLEW0 */ /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ /* PC9 */ { 1, 0, 0, 1, 0, 1 }, /* SPA_TX_EN */ /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */ /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */ }, /* Port D */ { /* conf ppar psor pdir podr pdat */ /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RxD */ /* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */ /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */ /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */ /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */ /* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */ /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ /* PD22 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4: RXD */ /* PD21 */ { 1, 1, 0, 1, 0, 0 }, /* SCC4: TXD */ /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */ /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */ /* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */ /* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */ #if defined(CONFIG_HARD_I2C) /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ #else /* PD15 */ { 1, 0, 0, 0, 1, 1 }, /* PD15 */ /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* PD14 */ #endif /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TxD */ /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RxD */ /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */ /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */ /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */ /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */ } }; /* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx * * This routine performs standard 8260 initialization sequence * and calculates the available memory size. It may be called * several times to try different SDRAM configurations on both * 60x and local buses. */ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, ulong orx, volatile uchar * base) { volatile uchar c = 0xff; volatile uint *sdmr_ptr; volatile uint *orx_ptr; ulong maxsize, size; int i; /* We must be able to test a location outsize the maximum legal size * to find out THAT we are outside; but this address still has to be * mapped by the controller. That means, that the initial mapping has * to be (at least) twice as large as the maximum expected size. */ maxsize = (1 + (~orx | 0x7fff))/* / 2*/; sdmr_ptr = &memctl->memc_psdmr; orx_ptr = &memctl->memc_or1; *orx_ptr = orx; /* * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): * * "At system reset, initialization software must set up the * programmable parameters in the memory controller banks registers * (ORx, BRx, P/LSDMR). After all memory parameters are configured, * system software should execute the following initialization sequence * for each SDRAM device. * * 1. Issue a PRECHARGE-ALL-BANKS command * 2. Issue eight CBR REFRESH commands * 3. Issue a MODE-SET command to initialize the mode register * * The initial commands are executed by setting P/LSDMR[OP] and * accessing the SDRAM with a single-byte transaction." * * The appropriate BRx/ORx registers have already been set when we * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. */ *sdmr_ptr = sdmr | PSDMR_OP_PREA; *base = c; *sdmr_ptr = sdmr | PSDMR_OP_CBRR; for (i = 0; i < 8; i++) *base = c; *sdmr_ptr = sdmr | PSDMR_OP_MRW; *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; *base = c; size = get_ram_size ((long *)base, maxsize); *orx_ptr = orx | ~(size - 1); return (size); } phys_size_t initdram (int board_type) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8260_t *memctl = &immap->im_memctl; long psize; #ifndef CONFIG_SYS_RAMBOOT long sizelittle, sizebig; #endif memctl->memc_psrt = CONFIG_SYS_PSRT; memctl->memc_mptpr = CONFIG_SYS_MPTPR; #ifndef CONFIG_SYS_RAMBOOT /* 60x SDRAM setup: */ sizelittle = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE, (uchar *) CONFIG_SYS_SDRAM_BASE); sizebig = try_init (memctl, CONFIG_SYS_PSDMR_BIG, CONFIG_SYS_OR1_BIG, (uchar *) CONFIG_SYS_SDRAM_BASE); if (sizelittle < sizebig) { psize = sizebig; } else { psize = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE, (uchar *) CONFIG_SYS_SDRAM_BASE); } #endif /* CONFIG_SYS_RAMBOOT */ icache_enable (); return (psize); } int checkboard (void) { puts ("Board: MUAS3001\n"); return 0; } /* * Early board initalization. */ int board_early_init_r (void) { return 0; } #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) DECLARE_GLOBAL_DATA_PTR; /* * update "memory" property in the blob */ void ft_blob_update (void *blob, bd_t *bd) { int ret, nodeoffset = 0; ulong flash_data[4] = {0}; ulong speed = 0; /* update Flash addr, size */ flash_data[2] = cpu_to_be32 (CONFIG_SYS_FLASH_BASE); flash_data[3] = cpu_to_be32 (CONFIG_SYS_FLASH_SIZE); nodeoffset = fdt_path_offset (blob, "/localbus"); if (nodeoffset >= 0) { ret = fdt_setprop (blob, nodeoffset, "ranges", flash_data, sizeof (flash_data)); if (ret < 0) printf ("ft_blob_update): cannot set /localbus/ranges " "property err:%s\n", fdt_strerror(ret)); } else { /* memory node is required in dts */ printf ("ft_blob_update(): cannot find /localbus node " "err:%s\n", fdt_strerror (nodeoffset)); } /* baudrate */ nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial"); if (nodeoffset >= 0) { speed = cpu_to_be32 (gd->baudrate); ret = fdt_setprop (blob, nodeoffset, "current-speed", &speed, sizeof (unsigned long)); if (ret < 0) printf ("ft_blob_update): cannot set /soc/cpm/serial/current-speed " "property err:%s\n", fdt_strerror (ret)); } else { /* baudrate is required in dts */ printf ("ft_blob_update(): cannot find /soc/cpm/smc2/current-speed node " "err:%s\n", fdt_strerror (nodeoffset)); } } void ft_board_setup (void *blob, bd_t *bd) { ft_cpu_setup (blob, bd); ft_blob_update (blob, bd); } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */