/* * (C) Copyright 2003 * Denis Peter, d.peter@mpl.ch * SPDX-License-Identifier: GPL-2.0+ */ /************************************************************************ * MACROS and register definitions for PATI Registers ************************************************************************/ #ifndef __PATI_H_ #define __PATI_H_ 1 #define PLD_PART_ID 0x0 #define PLD_BOARD_TIMING 0x4 #define PLD_CONF_REG1 0x8 #define PLD_CONF_REG2 0xC #define PLD_CONF_RES 0x10 #define SET_REG_BIT(y,x) (y<<(31-x)) #define GET_REG_BIT(y,x) ((y>>(31-x)) & 0x1L) /* SDRAM Controller PLD_PART_ID */ /* 9 10 11 12 13 14 19 31 */ #define SDRAM_PART3 9 #define SDRAM_PART2 10 #define SDRAM_PART1 11 #define SDRAM_PART0 12 #define SDRAM_ID3 13 #define SDRAM_ID2 14 #define SDRAM_ID1 19 #define SDRAM_ID0 31 #define SDRAM_PART(x) ( \ (GET_REG_BIT(x,SDRAM_PART3)<<3) |\ (GET_REG_BIT(x,SDRAM_PART2)<<2) |\ (GET_REG_BIT(x,SDRAM_PART1)<<1) |\ (GET_REG_BIT(x,SDRAM_PART0))) #define SDRAM_ID(x) ( \ (GET_REG_BIT(x,SDRAM_ID3)<<3) |\ (GET_REG_BIT(x,SDRAM_ID2)<<2) |\ (GET_REG_BIT(x,SDRAM_ID1)<<1) |\ (GET_REG_BIT(x,SDRAM_ID0))) /* System Controller */ /* 0 1 3 4 5 16 20 28 29 30 */ #define SYSCNTR_PART4 0 #define SYSCNTR_PART3 1 #define SYSCNTR_PART2 3 #define SYSCNTR_PART1 4 #define SYSCNTR_PART0 5 #define SYSCNTR_ID4 16 #define SYSCNTR_ID3 20 #define SYSCNTR_ID2 28 #define SYSCNTR_ID1 29 #define SYSCNTR_ID0 30 #define SYSCNTR_PART(x) ( \ (GET_REG_BIT(x,SYSCNTR_PART4)<<4) |\ (GET_REG_BIT(x,SYSCNTR_PART3)<<3) |\ (GET_REG_BIT(x,SYSCNTR_PART2)<<2) |\ (GET_REG_BIT(x,SYSCNTR_PART1)<<1) |\ (GET_REG_BIT(x,SYSCNTR_PART0))) #define SYSCNTR_ID(x) ( \ (GET_REG_BIT(x,SYSCNTR_ID4)<<4) |\ (GET_REG_BIT(x,SYSCNTR_ID3)<<3) |\ (GET_REG_BIT(x,SYSCNTR_ID2)<<2) |\ (GET_REG_BIT(x,SYSCNTR_ID1)<<1) |\ (GET_REG_BIT(x,SYSCNTR_ID0))) /* SDRAM Controller PLD_BOARD_TIMING */ /* 9 10 11 12 13 14 19 31 */ #define SDRAM_CAL 9 #define SDRAM_RCD 10 #define SDRAM_WREQ 11 #define SDRAM_PR 12 #define SDRAM_RC 13 #define SDRAM_LMR 14 #define SDRAM_IIP 19 #define SDRAM_RES0 31 /* System Controller */ /* 0 1 3 4 5 16 20 28 29 30 */ #define SYSCNTR_BREV0 0 #define SYSCNTR_BREV1 1 #define SYSCNTR_BREV2 3 #define SYSCNTR_BREV3 4 #define SYSCNTR_RES0 5 #define SYSCNTR_RES1 16 #define SYSCNTR_RES2 20 #define SYSCNTR_FLWAIT2 28 #define SYSCNTR_FLWAIT1 29 #define SYSCNTR_FLWAIT0 30 #define SYSCNTR_BREV(x) ( \ (GET_REG_BIT(x,SYSCNTR_BREV3)<<3) |\ (GET_REG_BIT(x,SYSCNTR_BREV2)<<2) |\ (GET_REG_BIT(x,SYSCNTR_BREV1)<<1) |\ (GET_REG_BIT(x,SYSCNTR_BREV0))) #define GET_SYSCNTR_FLWAIT(x) ( \ (GET_REG_BIT(x,SYSCNTR_FLWAIT2)<<2) |\ (GET_REG_BIT(x,SYSCNTR_FLWAIT1)<<1) |\ (GET_REG_BIT(x,SYSCNTR_FLWAIT0))) #define SET_SYSCNTR_FLWAIT(x) ( \ (SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_FLWAIT2)) |\ (SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_FLWAIT1)) |\ (SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_FLWAIT0))) /* SDRAM Controller REG 2*/ /* 9 10 11 12 13 14 19 31 */ #define SDRAM_MUX0 9 #define SDRAM_MUX1 10 #define SDRAM_PDIS 11 #define SDRAM_RES1 12 #define SDRAM_RES2 13 #define SDRAM_RES3 14 #define SDRAM_RES4 19 #define SDRAM_RIP 31 #define GET_SDRAM_MUX(x) ( \ (GET_REG_BIT(x,SDRAM_MUX1)<<1)| \ (GET_REG_BIT(x,SDRAM_MUX0))) /* System Controller */ /* 0 1 3 4 5 16 20 28 29 30 */ #define SYSCNTR_FLAG 0 #define SYSCNTR_IP 1 #define SYSCNTR_BIND2 3 #define SYSCNTR_BIND1 4 #define SYSCNTR_BIND0 5 #define SYSCNTR_PRM 16 #define SYSCNTR_ICW 20 #define SYSCNTR_ISB2 28 #define SYSCNTR_ISB1 29 #define SYSCNTR_ISB0 30 #define GET_SYSCNTR_BOOTIND(x) ( \ (GET_REG_BIT(x,SYSCNTR_BIND2)<<2) |\ (GET_REG_BIT(x,SYSCNTR_BIND1)<<1) |\ (GET_REG_BIT(x,SYSCNTR_BIND0))) #define SET_SYSCNTR_BOOTIND(x) ( \ (SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_BIND2)) |\ (SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_BIND1))| \ (SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_BIND0))) #define GET_SYSCNTR_ISB(x) ( \ (GET_REG_BIT(x,SYSCNTR_ISB2)<<2)| \ (GET_REG_BIT(x,SYSCNTR_ISB1)<<1)| \ (GET_REG_BIT(x,SYSCNTR_ISB0))) #define SET_SYSCNTR_ISB(x) ( \ (SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_ISB2))| \ (SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_ISB))| \ (SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_ISB0))) /* SDRAM Controller REG 3*/ /* 9 10 11 12 13 14 19 31 */ #define SDRAM_RES5 9 #define SDRAM_CFG1 10 #define SDRAM_CFG2 11 #define SDRAM_CFG3 12 #define SDRAM_RES6 13 #define SDRAM_CFG5 14 #define SDRAM_CFG6 19 #define SDRAM_RES7 31 #define GET_SDRAM_CFG(x) ( \ (GET_REG_BIT(x,SDRAM_CFG6)<<4) |\ (GET_REG_BIT(x,SDRAM_CFG5)<<3) |\ (GET_REG_BIT(x,SDRAM_CFG3)<<2) |\ (GET_REG_BIT(x,SDRAM_CFG2)<<1) |\ (GET_REG_BIT(x,SDRAM_CFG1))) /* System Controller */ /* 0 1 3 4 5 16 20 28 29 30 */ #define SYSCNTR_BDIS 0 #define SYSCNTR_PCIM 1 #define SYSCNTR_CFG0 3 #define SYSCNTR_CFG1 4 #define SYSCNTR_CFG2 5 #define SYSCNTR_CFG3 16 #define SYSCNTR_BOOTEN 20 #define SYSCNTR_CPU_VPP 28 #define SYSCNTR_FL_VPP 29 #define SYSCNTR_FL_WP 30 #define GET_SYSCNTR_CFG(x) ( \ (GET_REG_BIT(x,SYSCNTR_CFG3)<<3)| \ (GET_REG_BIT(x,SYSCNTR_CFG2)<<2)| \ (GET_REG_BIT(x,SYSCNTR_CFG1)<<1)| \ (GET_REG_BIT(x,SYSCNTR_CFG0))) /*************************************************************** * MISC Defines ***************************************************************/ #define PCI_VENDOR_ID_MPL 0x18E6 #define PCI_DEVICE_ID_PATI 0x00DA #if defined(CONFIG_MIP405) #define PATI_FIRMWARE_START_OFFSET 0x00300000 #define PATI_ISO_STRING "MEV-10084-001" #endif #define PATI_ENDIAN_MODE 0x3E /******************************************* * PATI Mapping: * ------------- * PCI Map: * ------- * All addreses are mapped into the memory area * (IO Area on some areas may also be possible) * - pci_cfg_mem_base: fixed address to the PLX config area size 512Bytes * - pci_space0_addr: configurable * - pci_space1_addr configurable * * Local Map: * ---------- * Local addresses (Remap) * - SDRAM 0x06000000 Size 16MByte mask 0xff000000 * - EPLD CFG 0x07000000 Size 512Bytes * - FLASH 0x03000000 Size up to 8MByte * - CPU 0x01000000 Size 4MByte (only accessable if special configured) * * Implemention: * ------------- * To prevent using large resources reservation on the host following * PCI mapping is choosed: * - pci_cfg_mem_base: fixed address to the PLX config area size 512Bytes * - pci_space0_addr: configured to the EPLD Config Area size 256Bytes * - pci_space1_addr: configured to the SDRAM Area size 1MBytes, this * space is used to switch between SDRAM, Flash and CPU * */ /* Attribute definitions */ #define PATI_BUS_SIZE_8 0 #define PATI_BUS_SIZE_16 1 #define PATI_BUS_SIZE_32 3 #define PATI_SPACE0_MASK (0xFEFFFE00) /* Mask Attributes */ #define PATI_SPACE1_MASK (0x00000000) /* Mask Attributes */ #define PATI_EXTRA_LONG_EEPROM 1 #define SPACE0_TA_ENABLE (1<<6) #define SPACE1_TA_ENABLE (1<<6) /* Config Area */ #define PATI_LOC_CFG_ADDR 0x07000000 /* Local Address */ #define PATI_LOC_CFG_MASK 0xFFFFFF00 /* 256 Bytes */ /* Attributes */ #define PATI_LOC_CFG_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */ #define PATI_LOC_CFG_BURST 0 /* No Burst */ #define PATI_LOC_CFG_NO_PREFETCH 1 /* No Prefetch */ #define PATI_LOC_CFG_TA_ENABLE 1 /* Enable TA */ #define PATI_LOC_CFG_SPACE0_ATTR ( \ PATI_LOC_CFG_BUS_SIZE | \ (PATI_LOC_CFG_TA_ENABLE << 6) | \ (PATI_LOC_CFG_NO_PREFETCH << 8) | \ (PATI_LOC_CFG_BURST << 24) | \ (PATI_EXTRA_LONG_EEPROM << 25)) /* should never be used */ #define PATI_LOC_CFG_SPACE1_ATTR ( \ PATI_LOC_CFG_BUS_SIZE | \ (PATI_LOC_CFG_TA_ENABLE << 6) | \ (PATI_LOC_CFG_NO_PREFETCH << 9) | \ (PATI_LOC_CFG_BURST << 8)) /* SDRAM Area */ #define PATI_LOC_SDRAM_ADDR 0x06000000 /* Local Address */ #define PATI_LOC_SDRAM_MASK 0xFFF00000 /* 1MByte */ /* Attributes */ #define PATI_LOC_SDRAM_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */ #define PATI_LOC_SDRAM_BURST 0 /* No Burst */ #define PATI_LOC_SDRAM_NO_PREFETCH 0 /* Prefetch */ #define PATI_LOC_SDRAM_TA_ENABLE 1 /* Enable TA */ /* should never be used */ #define PATI_LOC_SDRAM_SPACE0_ATTR ( \ PATI_LOC_SDRAM_BUS_SIZE | \ (PATI_LOC_SDRAM_TA_ENABLE << 6) | \ (PATI_LOC_SDRAM_NO_PREFETCH << 8) | \ (PATI_LOC_SDRAM_BURST << 24) | \ (PATI_EXTRA_LONG_EEPROM << 25)) #define PATI_LOC_SDRAM_SPACE1_ATTR ( \ PATI_LOC_SDRAM_BUS_SIZE | \ (PATI_LOC_SDRAM_TA_ENABLE << 6) | \ (PATI_LOC_SDRAM_NO_PREFETCH << 9) | \ (PATI_LOC_SDRAM_BURST << 8)) /* Flash Area */ #define PATI_LOC_FLASH_ADDR 0x03000000 /* Local Address */ #define PATI_LOC_FLASH_MASK 0xFFF00000 /* 1MByte */ /* Attributes */ #define PATI_LOC_FLASH_BUS_SIZE PATI_BUS_SIZE_16 /* 16 Bit */ #define PATI_LOC_FLASH_BURST 0 /* No Burst */ #define PATI_LOC_FLASH_NO_PREFETCH 1 /* No Prefetch */ #define PATI_LOC_FLASH_TA_ENABLE 1 /* Enable TA */ /* should never be used */ #define PATI_LOC_FLASH_SPACE0_ATTR ( \ PATI_LOC_FLASH_BUS_SIZE | \ (PATI_LOC_FLASH_TA_ENABLE << 6) | \ (PATI_LOC_FLASH_NO_PREFETCH << 8) | \ (PATI_LOC_FLASH_BURST << 24) | \ (PATI_EXTRA_LONG_EEPROM << 25)) #define PATI_LOC_FLASH_SPACE1_ATTR ( \ PATI_LOC_FLASH_BUS_SIZE | \ (PATI_LOC_FLASH_TA_ENABLE << 6) | \ (PATI_LOC_FLASH_NO_PREFETCH << 9) | \ (PATI_LOC_FLASH_BURST << 8)) /* CPU Area */ #define PATI_LOC_CPU_ADDR 0x01000000 /* Local Address */ #define PATI_LOC_CPU_MASK 0xFFF00000 /* 1Mbyte */ /* Attributes */ #define PATI_LOC_CPU_BUS_SIZE PATI_BUS_SIZE_32 /* 32 Bit */ #define PATI_LOC_CPU_BURST 0 /* No Burst */ #define PATI_LOC_CPU_NO_PREFETCH 1 /* No Prefetch */ #define PATI_LOC_CPU_TA_ENABLE 1 /* Enable TA */ /* should never be used */ #define PATI_LOC_CPU_SPACE0_ATTR ( \ PATI_LOC_CPU_BUS_SIZE | \ (PATI_LOC_CPU_TA_ENABLE << 6) | \ (PATI_LOC_CPU_NO_PREFETCH << 8) | \ (PATI_LOC_CPU_BURST << 24) | \ (PATI_EXTRA_CPU_EEPROM << 25)) #define PATI_LOC_CPU_SPACE1_ATTR ( \ PATI_LOC_CPU_BUS_SIZE | \ (PATI_LOC_CPU_TA_ENABLE << 6) | \ (PATI_LOC_CPU_NO_PREFETCH << 9) | \ (PATI_LOC_CPU_BURST << 8)) /*************************************************** * Hardware Config word definition ***************************************************/ #define BOOT_EXT_FLASH 0x00000000 #define BOOT_INT_FLASH 0x00000004 #define BOOT_FROM_PCI 0x00000006 #define BOOT_FROM_SDRAM 0x00000005 #define ENABLE_INT_ARB 0x00000008 #define INITIAL_IRQ_PREF 0x00000010 #define INITIAL_MEM_0M 0x00000000 #define INITIAL_MEM_4M 0x00000080 #define INITIAL_MEM_8M 0x00000040 #define INITIAL_MEM_12M 0x000000C0 #define INITIAL_MEM_16M 0x00000020 #define INITIAL_MEM_20M 0x000000A0 #define INITIAL_MEM_24M 0x00000060 #define INITIAL_MEM_28M 0x000000E0 /* CONF */ #define INTERNAL_HWCONF 0x00000100 /* PRPM */ #define LOCAL_CPU_SLAVE 0x00000200 /* BDIS */ #define DISABLE_MEM_CNTR 0x00000400 /* PCIM */ #define PCI_MASTER_ONLY 0x00000800 #define PATI_HW_START ((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF)) #define PATI_HW_PCI_ONLY ((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY)) #define PATI_HW_CPU_ACC ((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY)) #define PATI_HW_CPU_SLAVE ((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY | LOCAL_CPU_SLAVE)) /*************************************************** * Direct Master Config ***************************************************/ #define PATI_DMASTER_PCI_ADDR 0x01000000 #define PATI_BUS_MASTER 1 #define PATI_DMASTER_MASK 0xFFF00000 /* 1MByte */ #define PATI_DMASTER_ADDR 0x01000000 /* Local Address */ #define PATI_DMASTER_MEMORY_EN 0x00000001 /* 0x00000001 */ #define PATI_DMASTER_READ_AHEAD 0x00000004 /* 0x00000004 */ #define PATI_DMASTER_READ_NOT_AHEAD 0x00000000 /* 0x00000004 */ #define PATI_DMASTER_PRE_SIZE_CNTRL_0 0x00000000 #define PATI_DMASTER_PRE_SIZE_CNTRL_4 0x00000008 #define PATI_DMASTER_PRE_SIZE_CNTRL_8 0x00001000 #define PATI_DMASTER_PRE_SIZE_CNTRL_16 0x00001008 #define PATI_DMASTER_REL_PCI 0x00000000 #define PATI_DMASTER_NOT_REL_PCI 0x00000010 #define PATI_DMASTER_WR_INVAL 0x00000200 #define PATI_DMASTER_NOT_WR_INVAL 0x00000000 #define PATI_DMASTER_PRE_LIMIT 0x00000800 #define PATI_DMASTER_PRE_CONT 0x00000000 #define PATI_DMASTER_DELAY_WR_0 0x00000000 #define PATI_DMASTER_DELAY_WR_4 0x00004000 #define PATI_DMASTER_DELAY_WR_8 0x00008000 #define PATI_DMASTER_DELAY_WR_16 0x0000C000 #define PATI_DMASTER_PCI_ADDR_MASK 0xFFFF0000 #define PATI_DMASTER_ATTR \ PATI_DMASTER_MEMORY_EN | \ PATI_DMASTER_READ_AHEAD | \ PATI_DMASTER_PRE_SIZE_CNTRL_4 | \ PATI_DMASTER_REL_PCI | \ PATI_DMASTER_NOT_WR_INVAL | \ PATI_DMASTER_PRE_LIMIT | \ PATI_DMASTER_DELAY_WR_0 #endif /* #ifndef __PATI_H_ */