/* * (C) Copyright 2002,2003, Motorola Inc. * Xianghua Xiao, (X.Xiao@motorola.com) * * (C) Copyright 2002 Scott McNutt * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include long int fixed_sdram (void); int board_pre_init (void) { #if defined(CONFIG_PCI) volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR); pci->peer &= 0xffffffdf; /* disable master abort */ #endif return 0; } int checkboard (void) { sys_info_t sysinfo; get_sys_info (&sysinfo); printf ("Board: Freescale MPC8540EVAL Board\n"); printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor[0] / 1000000); printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000); printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000); if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \ || (CONFIG_SYS_LBC_LCRR & 0x0f) == 8) { printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000/(CONFIG_SYS_LBC_LCRR & 0x0f)); } else { printf("\tLBC: unknown\n"); } printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n"); return (0); } phys_size_t initdram (int board_type) { long dram_size = 0; #if !defined(CONFIG_RAM_AS_FLASH) volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); sys_info_t sysinfo; uint temp_lbcdll = 0; #endif #if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #endif #if defined(CONFIG_DDR_DLL) uint temp_ddrdll = 0; /* Work around to stabilize DDR DLL */ temp_ddrdll = gur->ddrdllcr; gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; asm("sync;isync;msync"); #endif #if defined(CONFIG_SPD_EEPROM) dram_size = fsl_ddr_sdram(); dram_size = setup_ddr_tlbs(dram_size / 0x100000); dram_size *= 0x100000; #else dram_size = fixed_sdram (); #endif #if defined(CONFIG_SYS_RAMBOOT) return dram_size; #endif #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */ get_sys_info(&sysinfo); /* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */ if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV) < 66000000) { lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000; } else { lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff; udelay(200); temp_lbcdll = gur->lbcdllcr; gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; asm("sync;isync;msync"); } lbc->or2 = CONFIG_SYS_OR2_PRELIM; /* 64MB SDRAM */ lbc->br2 = CONFIG_SYS_BR2_PRELIM; lbc->lbcr = CONFIG_SYS_LBC_LBCR; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); * (ulong *)0 = 0x000000ff; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; asm("sync"); * (ulong *)0 = 0x000000ff; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3; asm("sync"); * (ulong *)0 = 0x000000ff; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; asm("sync"); * (ulong *)0 = 0x000000ff; lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; asm("sync"); lbc->lsrt = CONFIG_SYS_LBC_LSRT; asm("sync"); lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("sync"); #endif #if defined(CONFIG_DDR_ECC) { /* Initialize all of memory for ECC, then * enable errors */ volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); /* Enable errors for ECC */ ddr->err_disable = 0x00000000; asm("sync;isync;msync"); } #endif return dram_size; } #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; uint *p; printf("SDRAM test phase 1:\n"); for (p = pstart; p < pend; p++) *p = 0xaaaaaaaa; for (p = pstart; p < pend; p++) { if (*p != 0xaaaaaaaa) { printf ("SDRAM test fails at: %08x\n", (uint) p); return 1; } } printf("SDRAM test phase 2:\n"); for (p = pstart; p < pend; p++) *p = 0x55555555; for (p = pstart; p < pend; p++) { if (*p != 0x55555555) { printf ("SDRAM test fails at: %08x\n", (uint) p); return 1; } } printf("SDRAM test passed.\n"); return 0; } #endif #if !defined(CONFIG_SPD_EEPROM) /************************************************************************* * fixed sdram init -- doesn't use serial presence detect. ************************************************************************/ long int fixed_sdram (void) { #ifndef CONFIG_SYS_RAMBOOT volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; ddr->sdram_mode = CONFIG_SYS_DDR_MODE; ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; #if defined (CONFIG_DDR_ECC) ddr->err_disable = 0x0000000D; ddr->err_sbe = 0x00ff0000; #endif asm("sync;isync;msync"); udelay(500); #if defined (CONFIG_DDR_ECC) /* Enable ECC checking */ ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); #else ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; #endif asm("sync; isync; msync"); udelay(500); #endif return (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024); } #endif /* !defined(CONFIG_SPD_EEPROM) */ int board_eth_init(bd_t *bis) { /* * This board either has PCI NICs or uses the CPU's TSECs * pci_eth_init() will return 0 if no NICs found, so in that case * returning -1 will force cpu_eth_init() to be called. */ int num = pci_eth_init(bis); return (num <= 0 ? -1 : num); }