/*
 * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
 *
 * (C) Copyright 2009 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <usb.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux-mx51.h>
#include <asm/gpio.h>
#include <usb/ehci-fsl.h>
#include <usb/ulpi.h>
#include <errno.h>

#include "../../../drivers/usb/host/ehci.h"

/*
 * Configure the USB H1 and USB H2 IOMUX
 */
void setup_iomux_usb(void)
{
	static const iomux_v3_cfg_t usb_h1_pads[] = {
		MX51_PAD_USBH1_CLK__USBH1_CLK,
		MX51_PAD_USBH1_DIR__USBH1_DIR,
		MX51_PAD_USBH1_STP__USBH1_STP,
		MX51_PAD_USBH1_NXT__USBH1_NXT,
		MX51_PAD_USBH1_DATA0__USBH1_DATA0,
		MX51_PAD_USBH1_DATA1__USBH1_DATA1,
		MX51_PAD_USBH1_DATA2__USBH1_DATA2,
		MX51_PAD_USBH1_DATA3__USBH1_DATA3,
		MX51_PAD_USBH1_DATA4__USBH1_DATA4,
		MX51_PAD_USBH1_DATA5__USBH1_DATA5,
		MX51_PAD_USBH1_DATA6__USBH1_DATA6,
		MX51_PAD_USBH1_DATA7__USBH1_DATA7,
	};

	static const iomux_v3_cfg_t usb_pads[] = {
		MX51_PAD_EIM_D27__GPIO2_9, /* USB PHY reset */
		MX51_PAD_GPIO1_5__GPIO1_5, /* USB HUB reset */
		NEW_PAD_CTRL(MX51_PAD_EIM_A22__GPIO2_16, 0), /* WIFI /EN */
		NEW_PAD_CTRL(MX51_PAD_EIM_A16__GPIO2_10, 0), /* WIFI RESET */
		NEW_PAD_CTRL(MX51_PAD_EIM_A17__GPIO2_11, 0), /* BT /EN */
	};

	imx_iomux_v3_setup_multiple_pads(usb_h1_pads, ARRAY_SIZE(usb_h1_pads));

	if (machine_is_efikasb()) {
		static const iomux_v3_cfg_t usb_h2_pads[] = {
			MX51_PAD_EIM_A24__USBH2_CLK,
			MX51_PAD_EIM_A25__USBH2_DIR,
			MX51_PAD_EIM_A26__USBH2_STP,
			MX51_PAD_EIM_A27__USBH2_NXT,
			MX51_PAD_EIM_D16__USBH2_DATA0,
			MX51_PAD_EIM_D17__USBH2_DATA1,
			MX51_PAD_EIM_D18__USBH2_DATA2,
			MX51_PAD_EIM_D19__USBH2_DATA3,
			MX51_PAD_EIM_D20__USBH2_DATA4,
			MX51_PAD_EIM_D21__USBH2_DATA5,
			MX51_PAD_EIM_D22__USBH2_DATA6,
			MX51_PAD_EIM_D23__USBH2_DATA7,
		};

		imx_iomux_v3_setup_multiple_pads(usb_h2_pads,
						 ARRAY_SIZE(usb_h2_pads));
	}

	imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
}

/*
 * Enable devices connected to USB BUSes
 */
static void efika_usb_enable_devices(void)
{
	/* Enable Bluetooth */
	gpio_direction_output(IMX_GPIO_NR(2, 11), 0);
	udelay(10000);
	gpio_set_value(IMX_GPIO_NR(2, 11), 1);

	/* Enable WiFi */
	gpio_direction_output(IMX_GPIO_NR(2, 16), 1);
	udelay(10000);

	/* Reset the WiFi chip */
	gpio_direction_output(IMX_GPIO_NR(2, 10), 0);
	udelay(10000);
	gpio_set_value(IMX_GPIO_NR(2, 10), 1);
}

/*
 * Reset USB HUB (or HUBs on EfikaSB)
 */
static void efika_usb_hub_reset(void)
{
	/* HUB reset */
	gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
	udelay(1000);
	gpio_set_value(IMX_GPIO_NR(1, 5), 0);
	udelay(1000);
	gpio_set_value(IMX_GPIO_NR(1, 5), 1);
}

/*
 * Reset USB PHY (or PHYs on EfikaSB)
 */
static void efika_usb_phy_reset(void)
{
	/* SMSC 3317 PHY reset */
	gpio_direction_output(IMX_GPIO_NR(2, 9), 0);
	udelay(1000);
	gpio_set_value(IMX_GPIO_NR(2, 9), 1);
}

static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio,
				iomux_v3_cfg_t stp_pad_gpio,
				iomux_v3_cfg_t stp_pad_usb)
{
	int ret;
	struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
	struct ulpi_viewport ulpi_vp;

	imx_iomux_v3_setup_pad(stp_pad_gpio);
	gpio_direction_output(stp_gpio, 0);
	udelay(1000);
	gpio_set_value(stp_gpio, 1);
	udelay(1000);

	imx_iomux_v3_setup_pad(stp_pad_usb);
	udelay(10000);

	ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint;
	ulpi_vp.port_num = 0;

	ret = ulpi_init(&ulpi_vp);
	if (ret) {
		printf("Efika USB ULPI initialization failed\n");
		return;
	}

	/* ULPI set flags */
	ulpi_write(&ulpi_vp, &ulpi->otg_ctrl,
			ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN |
			ULPI_OTG_EXTVBUSIND);
	ulpi_write(&ulpi_vp, &ulpi->function_ctrl,
			ULPI_FC_FULL_SPEED | ULPI_FC_OPMODE_NORMAL |
			ULPI_FC_SUSPENDM);
	ulpi_write(&ulpi_vp, &ulpi->iface_ctrl, 0);

	/* Set VBus */
	ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set,
			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);

	/*
	 * Set VBusChrg
	 *
	 * NOTE: This violates USB specification, but otherwise, USB on Efika
	 * doesn't work.
	 */
	ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS);
}

int board_ehci_hcd_init(int port)
{
	/* Init iMX51 EHCI */
	efika_usb_phy_reset();
	efika_usb_hub_reset();
	efika_usb_enable_devices();

	return 0;
}

void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
{
	uint32_t port = OTG_BASE_ADDR + (0x200 * CONFIG_MXC_USB_PORT);
	struct usb_ehci *ehci = (struct usb_ehci *)port;
	struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
	struct ulpi_viewport ulpi_vp;

	ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint;
	ulpi_vp.port_num = 0;

	ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_CHRGVBUS);

	mdelay(50);

	/* terminate the reset */
	*reg = ehci_readl(status_reg);
	*reg |= EHCI_PS_PE;
}

void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
{
	uint32_t tmp;

	if (port == 0) {
		/* Adjust UTMI PHY frequency to 24MHz */
		tmp = readl(OTG_BASE_ADDR + 0x80c);
		tmp = (tmp & ~0x3) | 0x01;
		writel(tmp, OTG_BASE_ADDR + 0x80c);
	} else if (port == 1) {
		efika_ehci_init(ehci, IMX_GPIO_NR(1, 27),
				MX51_PAD_USBH1_STP__GPIO1_27,
				MX51_PAD_USBH1_STP__USBH1_STP);
	} else if ((port == 2) && machine_is_efikasb()) {
		efika_ehci_init(ehci, IMX_GPIO_NR(2, 20),
				MX51_PAD_EIM_A26__GPIO2_20,
				MX51_PAD_EIM_A26__USBH2_STP);
	}

	if (port)
		mdelay(10);
}

/*
 * Ethernet on the Smarttop is on the USB bus. Rather than give an error about
 * "CPU Net Initialization Failed", just pass this test since no other settings
 * are required. Smartbook doesn't have built-in Ethernet but we will let it
 * pass anyway considering someone may have plugged in a USB stick and all
 * they need to do is run "usb start".
 */
int board_eth_init(bd_t *bis)
{
	return 0;
}