/* * Copyright 2004 Freescale Semiconductor. * (C) Copyright 2002,2003, Motorola Inc. * Xianghua Xiao, (X.Xiao@motorola.com) * * (C) Copyright 2002 Scott McNutt * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); #endif void local_bus_init(void); void sdram_init(void); long int fixed_sdram(void); int checkboard (void) { puts("Board: ADS\n"); #ifdef CONFIG_PCI printf(" PCI1: 32 bit, %d MHz (compiled)\n", CONFIG_SYS_CLK_FREQ / 1000000); #else printf(" PCI1: disabled\n"); #endif /* * Initialize local bus. */ local_bus_init(); return 0; } phys_size_t initdram(int board_type) { long dram_size = 0; puts("Initializing\n"); #if defined(CONFIG_DDR_DLL) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint temp_ddrdll = 0; /* * Work around to stabilize DDR DLL */ temp_ddrdll = gur->ddrdllcr; gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; asm("sync;isync;msync"); } #endif #ifdef CONFIG_SPD_EEPROM dram_size = fsl_ddr_sdram(); dram_size = setup_ddr_tlbs(dram_size / 0x100000); dram_size *= 0x100000; #else dram_size = fixed_sdram(); #endif #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* * Initialize and enable DDR ECC. */ ddr_enable_ecc(dram_size); #endif /* * Initialize SDRAM. */ sdram_init(); puts(" DDR: "); return dram_size; } /* * Initialize Local Bus */ void local_bus_init(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint clkdiv; uint lbc_hz; sys_info_t sysinfo; /* * Errata LBC11. * Fix Local Bus clock glitch when DLL is enabled. * * If localbus freq is < 66MHz, DLL bypass mode must be used. * If localbus freq is > 133MHz, DLL can be safely enabled. * Between 66 and 133, the DLL is enabled with an override workaround. */ get_sys_info(&sysinfo); clkdiv = lbc->lcrr & 0x0f; lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */ } else if (lbc_hz >= 133) { lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ } else { /* * On REV1 boards, need to change CLKDIV before enable DLL. * Default CLKDIV is 8, change it to 4 temporarily. */ uint pvr = get_pvr(); uint temp_lbcdll = 0; if (pvr == PVR_85xx_REV1) { /* FIXME: Justify the high bit here. */ lbc->lcrr = 0x10000004; } lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ udelay(200); /* * Sample LBC DLL ctrl reg, upshift it to set the * override bits. */ temp_lbcdll = gur->lbcdllcr; gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000); asm("sync;isync;msync"); } } /* * Initialize SDRAM memory on the Local Bus. */ void sdram_init(void) { volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; puts(" SDRAM: "); print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* * Setup SDRAM Base and Option Registers */ lbc->or2 = CONFIG_SYS_OR2_PRELIM; lbc->br2 = CONFIG_SYS_BR2_PRELIM; lbc->lbcr = CONFIG_SYS_LBC_LBCR; asm("msync"); lbc->lsrt = CONFIG_SYS_LBC_LSRT; lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; asm("sync"); /* * Configure the SDRAM controller. */ lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; asm("sync"); *sdram_addr = 0xff; ppcDcbf((unsigned long) sdram_addr); udelay(100); } #if !defined(CONFIG_SPD_EEPROM) /************************************************************************* * fixed sdram init -- doesn't use serial presence detect. ************************************************************************/ long int fixed_sdram (void) { #ifndef CONFIG_SYS_RAMBOOT volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; ddr->sdram_mode = CONFIG_SYS_DDR_MODE; ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; #if defined (CONFIG_DDR_ECC) ddr->err_disable = 0x0000000D; ddr->err_sbe = 0x00ff0000; #endif asm("sync;isync;msync"); udelay(500); #if defined (CONFIG_DDR_ECC) /* Enable ECC checking */ ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); #else ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; #endif asm("sync; isync; msync"); udelay(500); #endif return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } #endif /* !defined(CONFIG_SPD_EEPROM) */ #if defined(CONFIG_PCI) /* * Initialize PCI Devices, report devices found. */ static struct pci_controller hose; #endif /* CONFIG_PCI */ void pci_init_board(void) { #ifdef CONFIG_PCI pci_mpc85xx_init(&hose); #endif /* CONFIG_PCI */ } #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { int node, tmp[2]; const char *path; ft_cpu_setup(blob, bd); node = fdt_path_offset(blob, "/aliases"); tmp[0] = 0; if (node >= 0) { #ifdef CONFIG_PCI path = fdt_getprop(blob, node, "pci0", NULL); if (path) { tmp[1] = hose.last_busno - hose.first_busno; do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); } #endif } } #endif