/* * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include DECLARE_GLOBAL_DATA_PTR; /* ------------------------------------------------------------------------- */ static long int dram_size (long int, long int *, long int); static void read_hw_vers (void); /* ------------------------------------------------------------------------- */ #define _NOT_USED_ 0xFFFFFFFF const uint sdram_table[] = { /* single read (offset 0x00 in upm ram) */ 0xEECEFC24, 0x100DFC24, 0xE02FBC04, 0x01AA7C04, 0x1FB5FC00, 0xFFFFFC05, _NOT_USED_, _NOT_USED_, /* burst read (offset 0x08 in upm ram) */ 0xEECEFC24, 0x100DFC24, 0xE0FFBC04, 0x10FF7C04, 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC00, 0xFFFFFC00, 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* single write (offset 0x18 in upm ram) */ 0xEECEFC24, 0x100DFC24, 0xE02BBC04, 0x01A27C00, 0xEFAAFC04, 0x1FB5FC05, _NOT_USED_, _NOT_USED_, /* burst write (offset 0x20 in upm ram) */ 0xEECEFC24, 0x103DFC24, 0xE0FBBC00, 0x10F77C00, 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC04, 0xFFFFFC05, /* init part1 (offset 0x28 in upm ram) */ 0xEFFAFC3C, 0x1FF4FC34, 0xEFFCBC34, 0x1FFC3C34, 0xFFFC3C35, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* refresh (offset 0x30 in upm ram) */ 0xEFFEBC0C, 0x1FFD7C04, 0xFFFFFC04, 0xFFFFFC05, /* init part2 (offset 0x34 in upm ram) */ 0xFFFEBC04, 0xEFFC3CB4, 0x1FFC3C34, 0xFFFC3C34, 0xFFFC3C34, 0xEFE83CB4, 0x1FB57C35, _NOT_USED_, /* exception (offset 0x3C in upm ram) */ 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ /* * Check Board Identity: * * Test ETX ID string (ETX_xxx...) * * Return 1 always. */ int checkboard (void) { char buf[64]; int i; int l = getenv_f("serial#", buf, sizeof(buf)); puts ("Board: "); #ifdef SB_ETX094 gd->board_type = 0; /* 0 = 2SDRAM-Device */ #else gd->board_type = 1; /* 1 = 1SDRAM-Device */ #endif if (l < 0 || strncmp(buf, "ETX_", 4)) { puts ("### No HW ID - assuming ETX_094\n"); read_hw_vers (); return (0); } for (i = 0; i < l; ++i) { if (buf[i] == ' ') break; putc(buf[i]); } putc ('\n'); read_hw_vers (); return (0); } /* ------------------------------------------------------------------------- */ phys_size_t initdram (int board_type) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; long int size_b0, size_b1, size8, size9; upmconfig (UPMA, (uint *) sdram_table, sizeof (sdram_table) / sizeof (uint)); /* * Preliminary prescaler for refresh (depends on number of * banks): This value is selected for four cycles every 62.4 us * with two SDRAM banks or four cycles every 31.2 us with one * bank. It will be adjusted after memory sizing. */ memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K; /* MPTPR_PTP_DIV32 0x0200 */ /* A3(SDRAM)=0 => Bursttype = Sequential * A2-A0(SDRAM)=010 => Burst length = 4 * A4-A6(SDRAM)=010 => CasLat=2 */ memctl->memc_mar = 0x00000088; /* * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at * preliminary addresses - these have to be modified after the * SDRAM size has been determined. */ memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; } memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ udelay (200); /* perform SDRAM initializsation sequence */ memctl->memc_mcr = 0x80004128; /* SDRAM bank 0 (CS2) - Init Part 1 */ memctl->memc_mcr = 0x80004734; /* SDRAM bank 0 (CS2) - Init Part 2 */ udelay (1); if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ memctl->memc_mcr = 0x80006128; /* SDRAM bank 1 (CS3) - Init Part 1 */ memctl->memc_mcr = 0x80006734; /* SDRAM bank 1 (CS3) - Init Part 2 */ udelay (1); } memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ udelay (1000); /* * Check Bank 0 Memory Size for re-configuration * * try 8 column mode */ size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); udelay (1000); /* * try 9 column mode */ size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); if (size8 < size9) { /* leave configuration at 9 columns */ size_b0 = size9; /* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ } else { /* back to 8 columns */ size_b0 = size8; memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; udelay (500); /* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ } if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ /* * Check Bank 1 Memory Size * use current column settings * [9 column SDRAM may also be used in 8 column mode, * but then only half the real size will be used.] */ size_b1 = dram_size (memctl->memc_mamr, (long *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); /* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */ } else { size_b1 = 0; } udelay (1000); /* * Adjust refresh rate depending on SDRAM type, both banks * For types > 128 MBit leave it at the current (fast) rate */ if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) { /* reduce to 15.6 us (62.4 us / quad) */ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; /*DIV16 */ udelay (1000); } /* * Final mapping: map bigger bank first */ if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */ memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; if (size_b0 > 0) { /* * Position Bank 0 immediately above Bank 1 */ memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) + size_b1; } else { unsigned long reg; /* * No bank 0 * * invalidate bank */ memctl->memc_br2 = 0; /* adjust refresh rate depending on SDRAM type, one bank */ reg = memctl->memc_mptpr; reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ memctl->memc_mptpr = reg; } } else { /* SDRAM Bank 0 is bigger - map first */ memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; if (size_b1 > 0) { /* * Position Bank 1 immediately above Bank 0 */ memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br3 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) + size_b0; } else { unsigned long reg; /* * No bank 1 * * invalidate bank */ memctl->memc_br3 = 0; /* adjust refresh rate depending on SDRAM type, one bank */ reg = memctl->memc_mptpr; reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ memctl->memc_mptpr = reg; } } udelay (10000); return (size_b0 + size_b1); } /* ------------------------------------------------------------------------- */ /* * Check memory range for valid RAM. A simple memory test determines * the actually available RAM size between addresses `base' and * `base + maxsize'. Some (not all) hardware errors are detected: * - short between address lines * - short between data lines */ static long int dram_size (long int mamr_value, long int *base, long int maxsize) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_mamr = mamr_value; return (get_ram_size(base, maxsize)); } /* ------------------------------------------------------------------------- */ /* HW-ID Table (Bits: 2^9;2^7;2^5) */ #define HW_ID_0 0x0000 #define HW_ID_1 0x0020 #define HW_ID_2 0x0080 #define HW_ID_3 0x00a0 #define HW_ID_4 0x0200 #define HW_ID_5 0x0220 #define HW_ID_6 0x0280 #define HW_ID_7 0x02a0 void read_hw_vers () { unsigned short rd_msk = 0x02A0; /* HW-ID pin-definition */ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; immr->im_ioport.iop_pddir &= ~(rd_msk); immr->im_ioport.iop_pdpar &= ~(rd_msk); /* debug printf("State of PD: %x\n",immr->im_ioport.iop_pddat); */ /* Check the HW-ID */ printf ("HW-Version: "); switch (immr->im_ioport.iop_pddat & rd_msk) { case HW_ID_0: printf ("V0.1 - V0.3 / W97238-Q3162-A1-1-2\n"); break; case HW_ID_1: printf ("V0.9 / W50037-Q1-D6-1\n"); break; case HW_ID_2: printf ("NOT USED - assuming ID#2\n"); break; case HW_ID_3: printf ("NOT USED - assuming ID#3\n"); break; case HW_ID_4: printf ("NOT USED - assuming ID#4\n"); break; case HW_ID_5: printf ("NOT USED - assuming ID#5\n"); break; case HW_ID_6: printf ("NOT USED - assuming ID#6\n"); break; case HW_ID_7: printf ("NOT USED - assuming ID#7\n"); break; default: printf ("###Error###\n"); break; } } /* ------------------------------------------------------------------------- */