/* * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ */ /* * Yoo. Jonghoon, IPone, yooth@ipone.co.kr * U-Boot port on RPXlite board * * Some of flash control words are modified. (from 2x16bit device * to 4x8bit device) * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices * are not tested. * * (?) Does an RPXLite board which * does not use AM29LV800 flash memory exist ? * I don't know... */ #include #include flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ /*----------------------------------------------------------------------- * Functions */ static ulong flash_get_size (vu_long *addr, flash_info_t *info); static int write_word (flash_info_t *info, ulong dest, ulong data); static void flash_get_offsets (ulong base, flash_info_t *info); /*----------------------------------------------------------------------- */ unsigned long flash_init (void) { /* volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; */ /* volatile memctl8xx_t *memctl = &immap->im_memctl; */ unsigned long size_b0 ; int i; /* Init: no FLASHes known */ for (i=0; imemc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; %%%*/ /* Re-do sizing to get full correct info */ size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE /* monitor protection ON by default */ flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, &flash_info[0]); #endif flash_info[0].size = size_b0; return (size_b0); } /*----------------------------------------------------------------------- */ static void flash_get_offsets (ulong base, flash_info_t *info) { int i; /* set up sector start address table */ if (info->flash_id & FLASH_BTYPE) { /* set sector offsets for bottom boot block type */ info->start[0] = base + 0x00000000; info->start[1] = base + 0x00010000; info->start[2] = base + 0x00018000; info->start[3] = base + 0x00020000; for (i = 4; i < info->sector_count; i++) { info->start[i] = base + ((i-3) * 0x00040000) ; } } else { /* set sector offsets for top boot block type */ i = info->sector_count - 1; info->start[i--] = base + info->size - 0x00010000; info->start[i--] = base + info->size - 0x00018000; info->start[i--] = base + info->size - 0x00020000; for (; i >= 0; i--) { info->start[i] = base + i * 0x00040000; } } } /*----------------------------------------------------------------------- */ void flash_print_info (flash_info_t *info) { int i; if (info->flash_id == FLASH_UNKNOWN) { printf ("missing or unknown FLASH type\n"); return; } switch (info->flash_id & FLASH_VENDMASK) { case FLASH_MAN_AMD: printf ("AMD "); break; case FLASH_MAN_FUJ: printf ("FUJITSU "); break; default: printf ("Unknown Vendor "); break; } switch (info->flash_id & FLASH_TYPEMASK) { case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); break; case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); break; case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); break; case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); break; case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); break; case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); break; case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); break; case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); break; default: printf ("Unknown Chip Type\n"); break; } printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); printf (" Sector Start Addresses:"); for (i=0; isector_count; ++i) { if ((i % 5) == 0) printf ("\n "); printf (" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " " ); } printf ("\n"); return; } /*----------------------------------------------------------------------- */ /*----------------------------------------------------------------------- */ /* * The following code cannot be run from FLASH! */ static ulong flash_get_size (vu_long *addr, flash_info_t *info) { short i; ulong value; ulong base = (ulong)addr; /* Write auto select command: read Manufacturer ID */ addr[0xAAA] = 0x00AA00AA ; addr[0x555] = 0x00550055 ; addr[0xAAA] = 0x00900090 ; value = addr[0] ; switch (value & 0x00FF00FF) { case AMD_MANUFACT: info->flash_id = FLASH_MAN_AMD; break; case FUJ_MANUFACT: info->flash_id = FLASH_MAN_FUJ; break; default: info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; info->size = 0; return (0); /* no or unknown flash */ } value = addr[2] ; /* device ID */ switch (value & 0x00FF00FF) { case (AMD_ID_LV400T & 0x00FF00FF): info->flash_id += FLASH_AM400T; info->sector_count = 11; info->size = 0x00100000; break; /* => 1 MB */ case (AMD_ID_LV400B & 0x00FF00FF): info->flash_id += FLASH_AM400B; info->sector_count = 11; info->size = 0x00100000; break; /* => 1 MB */ case (AMD_ID_LV800T & 0x00FF00FF): info->flash_id += FLASH_AM800T; info->sector_count = 19; info->size = 0x00200000; break; /* => 2 MB */ case (AMD_ID_LV800B & 0x00FF00FF): info->flash_id += FLASH_AM800B; info->sector_count = 19; info->size = 0x00400000; /*%%% Size doubled by yooth */ break; /* => 4 MB */ case (AMD_ID_LV160T & 0x00FF00FF): info->flash_id += FLASH_AM160T; info->sector_count = 35; info->size = 0x00400000; break; /* => 4 MB */ case (AMD_ID_LV160B & 0x00FF00FF): info->flash_id += FLASH_AM160B; info->sector_count = 35; info->size = 0x00400000; break; /* => 4 MB */ #if 0 /* enable when device IDs are available */ case AMD_ID_LV320T: info->flash_id += FLASH_AM320T; info->sector_count = 67; info->size = 0x00800000; break; /* => 8 MB */ case AMD_ID_LV320B: info->flash_id += FLASH_AM320B; info->sector_count = 67; info->size = 0x00800000; break; /* => 8 MB */ #endif default: info->flash_id = FLASH_UNKNOWN; return (0); /* => no or unknown flash */ } /*%%% sector start address modified */ /* set up sector start address table */ if (info->flash_id & FLASH_BTYPE) { /* set sector offsets for bottom boot block type */ info->start[0] = base + 0x00000000; info->start[1] = base + 0x00010000; info->start[2] = base + 0x00018000; info->start[3] = base + 0x00020000; for (i = 4; i < info->sector_count; i++) { info->start[i] = base + ((i-3) * 0x00040000) ; } } else { /* set sector offsets for top boot block type */ i = info->sector_count - 1; info->start[i--] = base + info->size - 0x00010000; info->start[i--] = base + info->size - 0x00018000; info->start[i--] = base + info->size - 0x00020000; for (; i >= 0; i--) { info->start[i] = base + i * 0x00040000; } } /* check for protected sectors */ for (i = 0; i < info->sector_count; i++) { /* read sector protection at sector address, (A7 .. A0) = 0x02 */ /* D0 = 1 if protected */ addr = (volatile unsigned long *)(info->start[i]); info->protect[i] = addr[4] & 1 ; } /* * Prevent writes to uninitialized FLASH. */ if (info->flash_id != FLASH_UNKNOWN) { addr = (volatile unsigned long *)info->start[0]; *addr = 0xF0F0F0F0; /* reset bank */ } return (info->size); } /*----------------------------------------------------------------------- */ int flash_erase (flash_info_t *info, int s_first, int s_last) { vu_long *addr = (vu_long*)(info->start[0]); int flag, prot, sect, l_sect; ulong start, now, last; if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { printf ("- missing\n"); } else { printf ("- no sectors to erase\n"); } return 1; } if ((info->flash_id == FLASH_UNKNOWN) || (info->flash_id > FLASH_AMD_COMP)) { printf ("Can't erase unknown flash type %08lx - aborted\n", info->flash_id); return 1; } prot = 0; for (sect=s_first; sect<=s_last; ++sect) { if (info->protect[sect]) { prot++; } } if (prot) { printf ("- Warning: %d protected sectors will not be erased!\n", prot); } else { printf ("\n"); } l_sect = -1; /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); addr[0xAAA] = 0xAAAAAAAA; addr[0x555] = 0x55555555; addr[0xAAA] = 0x80808080; addr[0xAAA] = 0xAAAAAAAA; addr[0x555] = 0x55555555; /* Start erase on unprotected sectors */ for (sect = s_first; sect<=s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ addr = (vu_long *)(info->start[sect]) ; addr[0] = 0x30303030 ; l_sect = sect; } } /* re-enable interrupts if necessary */ if (flag) enable_interrupts(); /* wait at least 80us - let's wait 1 ms */ udelay (1000); /* * We wait for the last triggered sector */ if (l_sect < 0) goto DONE; start = get_timer (0); last = start; addr = (vu_long *)(info->start[l_sect]); while ((addr[0] & 0x80808080) != 0x80808080) { if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); return 1; } /* show that we're waiting */ if ((now - last) > 1000) { /* every second */ putc ('.'); last = now; } } DONE: /* reset to read mode */ addr = (vu_long *)info->start[0]; addr[0] = 0xF0F0F0F0; /* reset bank */ printf (" done\n"); return 0; } /*----------------------------------------------------------------------- * Copy memory to flash, returns: * 0 - OK * 1 - write timeout * 2 - Flash not erased */ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { ulong cp, wp, data; int i, l, rc; wp = (addr & ~3); /* get lower word aligned address */ /* * handle unaligned start bytes */ if ((l = addr - wp) != 0) { data = 0; for (i=0, cp=wp; i0; ++i) { data = (data << 8) | *src++; --cnt; ++cp; } for (; cnt==0 && i<4; ++i, ++cp) { data = (data << 8) | (*(uchar *)cp); } if ((rc = write_word(info, wp, data)) != 0) { return (rc); } wp += 4; } /* * handle word aligned part */ while (cnt >= 4) { data = 0; for (i=0; i<4; ++i) { data = (data << 8) | *src++; } if ((rc = write_word(info, wp, data)) != 0) { return (rc); } wp += 4; cnt -= 4; } if (cnt == 0) { return (0); } /* * handle unaligned tail bytes */ data = 0; for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { data = (data << 8) | *src++; --cnt; } for (; i<4; ++i, ++cp) { data = (data << 8) | (*(uchar *)cp); } return (write_word(info, wp, data)); } /*----------------------------------------------------------------------- * Write a word to Flash, returns: * 0 - OK * 1 - write timeout * 2 - Flash not erased */ static int write_word (flash_info_t *info, ulong dest, ulong data) { vu_long *addr = (vu_long *)(info->start[0]); ulong start; int flag; /* Check if Flash is (sufficiently) erased */ if ((*((vu_long *)dest) & data) != data) { return (2); } /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); addr[0xAAA] = 0xAAAAAAAA; addr[0x555] = 0x55555555; addr[0xAAA] = 0xA0A0A0A0; *((vu_long *)dest) = data; /* re-enable interrupts if necessary */ if (flag) enable_interrupts(); /* data polling for D7 */ start = get_timer (0); while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) { if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { return (1); } } return (0); } /*----------------------------------------------------------------------- */