SoC overview

	1. LS1043A
	2. LS2080A

LS1043A
---------
The LS1043A integrated multicore processor combines four ARM Cortex-A53
processor cores with datapath acceleration optimized for L2/3 packet
processing, single pass security offload and robust traffic management
and quality of service.

The LS1043A SoC includes the following function and features:
 - Four 64-bit ARM Cortex-A53 CPUs
 - 1 MB unified L2 Cache
 - One 32-bit DDR3L/DDR4 SDRAM memory controllers with ECC and interleaving
   support
 - Data Path Acceleration Architecture (DPAA) incorporating acceleration the
   the following functions:
   - Packet parsing, classification, and distribution (FMan)
   - Queue management for scheduling, packet sequencing, and congestion
     management (QMan)
   - Hardware buffer management for buffer allocation and de-allocation (BMan)
   - Cryptography acceleration (SEC)
 - Ethernet interfaces by FMan
   - Up to 1 x XFI supporting 10G interface
   - Up to 1 x QSGMII
   - Up to 4 x SGMII supporting 1000Mbps
   - Up to 2 x SGMII supporting 2500Mbps
   - Up to 2 x RGMII supporting 1000Mbps
 - High-speed peripheral interfaces
   - Three PCIe 2.0 controllers, one supporting x4 operation
   - One serial ATA (SATA 3.0) controllers
 - Additional peripheral interfaces
   - Three high-speed USB 3.0 controllers with integrated PHY
   - Enhanced secure digital host controller (eSDXC/eMMC)
   - Quad Serial Peripheral Interface (QSPI) Controller
   - Serial peripheral interface (SPI) controller
   - Four I2C controllers
   - Two DUARTs
   - Integrated flash controller supporting NAND and NOR flash
 - QorIQ platform's trust architecture 2.1

LS2080A
--------
The LS2080A integrated multicore processor combines eight ARM Cortex-A57
processor cores with high-performance data path acceleration logic and network
and peripheral bus interfaces required for networking, telecom/datacom,
wireless infrastructure, and mil/aerospace applications.

The LS2080A SoC includes the following function and features:

 - Eight 64-bit ARM Cortex-A57 CPUs
 - 1 MB platform cache with ECC
 - Two 64-bit DDR4 SDRAM memory controllers with ECC and interleaving support
 - One secondary 32-bit DDR4 SDRAM memory controller, intended for use by
  the AIOP
 - Data path acceleration architecture (DPAA2) incorporating acceleration for
 the following functions:
   - Packet parsing, classification, and distribution (WRIOP)
   - Queue and Hardware buffer management for scheduling, packet sequencing, and
     congestion management, buffer allocation and de-allocation (QBMan)
   - Cryptography acceleration (SEC) at up to 10 Gbps
   - RegEx pattern matching acceleration (PME) at up to 10 Gbps
   - Decompression/compression acceleration (DCE) at up to 20 Gbps
   - Accelerated I/O processing (AIOP) at up to 20 Gbps
   - QDMA engine
 - 16 SerDes lanes at up to 10.3125 GHz
 - Ethernet interfaces
   - Up to eight 10 Gbps Ethernet MACs
   - Up to eight 1 / 2.5 Gbps Ethernet MACs
 - High-speed peripheral interfaces
   - Four PCIe 3.0 controllers, one supporting SR-IOV
 - Additional peripheral interfaces
   - Two serial ATA (SATA 3.0) controllers
   - Two high-speed USB 3.0 controllers with integrated PHY
   - Enhanced secure digital host controller (eSDXC/eMMC)
   - Serial peripheral interface (SPI) controller
   - Quad Serial Peripheral Interface (QSPI) Controller
   - Four I2C controllers
   - Two DUARTs
   - Integrated flash controller (IFC 2.0) supporting NAND and NOR flash
 - Support for hardware virtualization and partitioning enforcement
 - QorIQ platform's trust architecture 3.0
 - Service processor (SP) provides pre-boot initialization and secure-boot
  capabilities