/* * (C) Copyright 2009 DENX Software Engineering * Author: John Rigby * * Based on mx27/generic.c: * Copyright (c) 2008 Eric Jarrige * Copyright (c) 2009 Ilya Yanok * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #ifdef CONFIG_MXC_MMC #include #endif #ifdef CONFIG_FSL_ESDHC DECLARE_GLOBAL_DATA_PTR; #endif /* * get the system pll clock in Hz * * mfi + mfn / (mfd +1) * f = 2 * f_ref * -------------------- * pd + 1 */ static unsigned int imx_decode_pll(unsigned int pll, unsigned int f_ref) { unsigned int mfi = (pll >> CCM_PLL_MFI_SHIFT) & CCM_PLL_MFI_MASK; unsigned int mfn = (pll >> CCM_PLL_MFN_SHIFT) & CCM_PLL_MFN_MASK; unsigned int mfd = (pll >> CCM_PLL_MFD_SHIFT) & CCM_PLL_MFD_MASK; unsigned int pd = (pll >> CCM_PLL_PD_SHIFT) & CCM_PLL_PD_MASK; mfi = mfi <= 5 ? 5 : mfi; return lldiv(2 * (u64) f_ref * (mfi * (mfd + 1) + mfn), (mfd + 1) * (pd + 1)); } static ulong imx_get_mpllclk(void) { struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; ulong fref = 24000000; return imx_decode_pll(readl(&ccm->mpctl), fref); } ulong imx_get_armclk(void) { struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; ulong cctl = readl(&ccm->cctl); ulong fref = imx_get_mpllclk(); ulong div; if (cctl & CCM_CCTL_ARM_SRC) fref = lldiv((fref * 3), 4); div = ((cctl >> CCM_CCTL_ARM_DIV_SHIFT) & CCM_CCTL_ARM_DIV_MASK) + 1; return lldiv(fref, div); } ulong imx_get_ahbclk(void) { struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; ulong cctl = readl(&ccm->cctl); ulong fref = imx_get_armclk(); ulong div; div = ((cctl >> CCM_CCTL_AHB_DIV_SHIFT) & CCM_CCTL_AHB_DIV_MASK) + 1; return lldiv(fref, div); } ulong imx_get_perclk(int clk) { struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; ulong fref = imx_get_ahbclk(); ulong div; div = readl(&ccm->pcdr[CCM_PERCLK_REG(clk)]); div = ((div >> CCM_PERCLK_SHIFT(clk)) & CCM_PERCLK_MASK) + 1; return lldiv(fref, div); } unsigned int mxc_get_clock(enum mxc_clock clk) { if (clk >= MXC_CLK_NUM) return -1; switch (clk) { case MXC_ARM_CLK: return imx_get_armclk(); case MXC_FEC_CLK: return imx_get_ahbclk(); default: return imx_get_perclk(clk); } } u32 get_cpu_rev(void) { u32 srev; u32 system_rev = 0x25000; /* read SREV register from IIM module */ struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; srev = readl(&iim->iim_srev); switch (srev) { case 0x00: system_rev |= CHIP_REV_1_0; break; case 0x01: system_rev |= CHIP_REV_1_1; break; default: system_rev |= 0x8000; break; } return system_rev; } #if defined(CONFIG_DISPLAY_CPUINFO) static char *get_reset_cause(void) { /* read RCSR register from CCM module */ struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; u32 cause = readl(&ccm->rcsr) & 0x0f; if (cause == 0) return "POR"; else if (cause == 1) return "RST"; else if ((cause & 2) == 2) return "WDOG"; else if ((cause & 4) == 4) return "SW RESET"; else if ((cause & 8) == 8) return "JTAG"; else return "unknown reset"; } int print_cpuinfo(void) { char buf[32]; u32 cpurev = get_cpu_rev(); printf("CPU: Freescale i.MX25 rev%d.%d%s at %s MHz\n", (cpurev & 0xF0) >> 4, (cpurev & 0x0F), ((cpurev & 0x8000) ? " unknown" : ""), strmhz(buf, imx_get_armclk())); printf("Reset cause: %s\n\n", get_reset_cause()); return 0; } #endif int cpu_eth_init(bd_t *bis) { #if defined(CONFIG_FEC_MXC) struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE; ulong val; val = readl(&ccm->cgr0); val |= (1 << 23); writel(val, &ccm->cgr0); return fecmxc_initialize(bis); #else return 0; #endif } int get_clocks(void) { #ifdef CONFIG_FSL_ESDHC gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); #endif return 0; } /* * Initializes on-chip MMC controllers. * to override, implement board_mmc_init() */ int cpu_mmc_init(bd_t *bis) { #ifdef CONFIG_MXC_MMC return mxc_mmc_init(bis); #else return 0; #endif } #ifdef CONFIG_MXC_UART void mx25_uart1_init_pins(void) { struct iomuxc_mux_ctl *muxctl; struct iomuxc_pad_ctl *padctl; u32 inpadctl; u32 outpadctl; u32 muxmode0; muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; muxmode0 = MX25_PIN_MUX_MODE(0); /* * set up input pins with hysteresis and 100K pull-ups */ inpadctl = MX25_PIN_PAD_CTL_HYS | MX25_PIN_PAD_CTL_PKE | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PU; /* * set up output pins with 100K pull-downs * FIXME: need to revisit this * PUE is ignored if PKE is not set * so the right value here is likely * 0x0 for no pull up/down * or * 0xc0 for 100k pull down */ outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD; /* UART1 */ /* rxd */ writel(muxmode0, &muxctl->pad_uart1_rxd); writel(inpadctl, &padctl->pad_uart1_rxd); /* txd */ writel(muxmode0, &muxctl->pad_uart1_txd); writel(outpadctl, &padctl->pad_uart1_txd); /* rts */ writel(muxmode0, &muxctl->pad_uart1_rts); writel(outpadctl, &padctl->pad_uart1_rts); /* cts */ writel(muxmode0, &muxctl->pad_uart1_cts); writel(inpadctl, &padctl->pad_uart1_cts); } #endif /* CONFIG_MXC_UART */ #ifdef CONFIG_FEC_MXC void mx25_fec_init_pins(void) { struct iomuxc_mux_ctl *muxctl; struct iomuxc_pad_ctl *padctl; u32 inpadctl_100kpd; u32 inpadctl_22kpu; u32 outpadctl; u32 muxmode0; muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; muxmode0 = MX25_PIN_MUX_MODE(0); inpadctl_100kpd = MX25_PIN_PAD_CTL_HYS | MX25_PIN_PAD_CTL_PKE | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD; inpadctl_22kpu = MX25_PIN_PAD_CTL_HYS | MX25_PIN_PAD_CTL_PKE | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_22K_PU; /* * set up output pins with 100K pull-downs * FIXME: need to revisit this * PUE is ignored if PKE is not set * so the right value here is likely * 0x0 for no pull * or * 0xc0 for 100k pull down */ outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD; /* FEC_TX_CLK */ writel(muxmode0, &muxctl->pad_fec_tx_clk); writel(inpadctl_100kpd, &padctl->pad_fec_tx_clk); /* FEC_RX_DV */ writel(muxmode0, &muxctl->pad_fec_rx_dv); writel(inpadctl_100kpd, &padctl->pad_fec_rx_dv); /* FEC_RDATA0 */ writel(muxmode0, &muxctl->pad_fec_rdata0); writel(inpadctl_100kpd, &padctl->pad_fec_rdata0); /* FEC_TDATA0 */ writel(muxmode0, &muxctl->pad_fec_tdata0); writel(outpadctl, &padctl->pad_fec_tdata0); /* FEC_TX_EN */ writel(muxmode0, &muxctl->pad_fec_tx_en); writel(outpadctl, &padctl->pad_fec_tx_en); /* FEC_MDC */ writel(muxmode0, &muxctl->pad_fec_mdc); writel(outpadctl, &padctl->pad_fec_mdc); /* FEC_MDIO */ writel(muxmode0, &muxctl->pad_fec_mdio); writel(inpadctl_22kpu, &padctl->pad_fec_mdio); /* FEC_RDATA1 */ writel(muxmode0, &muxctl->pad_fec_rdata1); writel(inpadctl_100kpd, &padctl->pad_fec_rdata1); /* FEC_TDATA1 */ writel(muxmode0, &muxctl->pad_fec_tdata1); writel(outpadctl, &padctl->pad_fec_tdata1); } void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { int i; struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; struct fuse_bank *bank = &iim->bank[0]; struct fuse_bank0_regs *fuse = (struct fuse_bank0_regs *)bank->fuse_regs; for (i = 0; i < 6; i++) mac[i] = readl(&fuse->mac_addr[i]) & 0xff; } #endif /* CONFIG_FEC_MXC */