From 9e4140329ee9a787d0f96ac2829d618d47f7973f Mon Sep 17 00:00:00 2001
From: Masahiro Yamada <yamada.m@jp.panasonic.com>
Date: Tue, 4 Feb 2014 17:24:24 +0900
Subject: kbuild: change out-of-tree build

This commit changes the working directory
where the build process occurs.

Before this commit, build process occurred under the source
tree for both in-tree and out-of-tree build.

That's why we needed to add $(obj) prefix to all generated
files in makefiles like follows:
  $(obj)u-boot.bin:  $(obj)u-boot

Here, $(obj) is empty for in-tree build, whereas it points
to the output directory for out-of-tree build.

And our old build system changes the current working directory
with "make -C <sub-dir>" syntax when descending into the
sub-directories.

On the other hand, Kbuild uses a different idea
to handle out-of-tree build and directory descending.

The build process of Kbuild always occurs under the output tree.
When "O=dir/to/store/output/files" is given, the build system
changes the current working directory to that directory and
restarts the make.

Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>"
syntax for descending into sub-directories.
(We can write it like "make $(obj)=<sub-dir>" with a shorthand.)
This means the current working directory is always the top
of the output directory.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Gerhard Sittig <gsi@denx.de>
---
 nand_spl/board/amcc/bamboo/Makefile | 30 ++++++++----------------------
 1 file changed, 8 insertions(+), 22 deletions(-)

(limited to 'nand_spl/board/amcc/bamboo/Makefile')

diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile
index 4063274de6..92b604e9f5 100644
--- a/nand_spl/board/amcc/bamboo/Makefile
+++ b/nand_spl/board/amcc/bamboo/Makefile
@@ -18,8 +18,8 @@ CFLAGS	+= -DCONFIG_NAND_SPL
 SOBJS	= start.o init.o resetvec.o
 COBJS	= nand_boot.o nand_ecc.o ndfc.o sdram.o
 
-SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+SRCS	:= $(addprefix $(obj)/,$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS	:= $(addprefix $(obj)/,$(SOBJS) $(COBJS))
 __OBJS	:= $(SOBJS) $(COBJS)
 LNDIR	:= $(nandobj)board/$(BOARDDIR)
 
@@ -41,43 +41,29 @@ $(nandobj)u-boot.lds: $(LDSCRIPT)
 # create symbolic links for common files
 
 # from cpu directory
-$(obj)ndfc.c:
+$(obj)/ndfc.c:
 	@rm -f $@
 	ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@
 
-$(obj)resetvec.S:
+$(obj)/resetvec.S:
 	@rm -f $@
 	ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@
 
-$(obj)start.S:
+$(obj)/start.S:
 	@rm -f $@
 	ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@
 
 # from board directory
-$(obj)init.S:
+$(obj)/init.S:
 	@rm -f $@
 	ln -s $(SRCTREE)/board/amcc/bamboo/init.S $@
 
 # from nand_spl directory
-$(obj)nand_boot.c:
+$(obj)/nand_boot.c:
 	@rm -f $@
 	ln -s $(SRCTREE)/nand_spl/nand_boot.c $@
 
 # from drivers/mtd/nand directory
-$(obj)nand_ecc.c:
+$(obj)/nand_ecc.c:
 	@rm -f $@
 	ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@
-
-ifneq ($(OBJTREE), $(SRCTREE))
-$(obj)sdram.c:
-	@rm -f $@
-	ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/sdram.c $@
-endif
-
-#########################################################################
-
-$(obj)%.o:	$(obj)%.S
-	$(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o:	$(obj)%.c
-	$(CC) $(CFLAGS) -c -o $@ $<
-- 
cgit v1.2.1