From f3b4bc458de3285a04c5f60df6372ad5ca79fa60 Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Wed, 28 Jan 2015 15:01:32 +0100 Subject: OMAP3: igep00x0: Fix boot hang and add support for status LED. Use the STATUS_LED APIs for indicating a boot progress instead of show_boot_progress. This patch also fixes a problem introduced with commit b3f4ca1135 (dm: omap3: Move to driver model for GPIO and serial). After that commit the board doesn't boot. Looks like the problem is the gpio_request call inside the function show_boot_progress. Signed-off-by: Enric Balletbo i Serra --- include/configs/omap3_igep00x0.h | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index b2b3750c1e..6295ec505f 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -29,11 +29,21 @@ #define CONFIG_REVISION_TAG 1 -/* define to enable boot progress via leds */ -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ - (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) -#define CONFIG_SHOW_BOOT_PROGRESS +/* Status LED */ +#define CONFIG_STATUS_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define CONFIG_GPIO_LED +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#define RED_LED_GPIO 27 +#endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) +#define RED_LED_GPIO 16 #endif +#define RED_LED_DEV 0 +#define STATUS_LED_BIT RED_LED_GPIO +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BOOT RED_LED_DEV /* GPIO banks */ #define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */ -- cgit v1.2.1