From e4bbed2803a2ad0521c7362f5d3e065f99abaedc Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 1 Jun 2007 13:45:24 +0200 Subject: ppc4xx: Change Luan config file to support ECC With the updated 44x DDR2 driver the Luan board now supports ECC generation and checking. Signed-off-by: Stefan Roese --- include/configs/luan.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/configs/luan.h b/include/configs/luan.h index 9c8769b200..045a144aad 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -135,7 +135,8 @@ *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ -#undef CONFIG_DDR_ECC /* no ECC support for now */ +#define CONFIG_DDR_ECC 1 /* with ECC support */ +#define CFG_44x_DDR2_CKTR_180 1 /* use 180 deg advance */ /*----------------------------------------------------------------------- * I2C -- cgit v1.2.1 From 53ad02103fb8be4138a9937a8ab91fcdff7b4987 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 1 Jun 2007 15:16:58 +0200 Subject: ppc4xx: Update in_be32() functions and friends to latest Linux version Signed-off-by: Stefan Roese --- include/asm-ppc/io.h | 89 ++++++++++++++++++++++++++++++++-------------------- 1 file changed, 55 insertions(+), 34 deletions(-) (limited to 'include') diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index bbc9ba0be6..03289bcc21 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -105,6 +105,11 @@ static inline void sync(void) __asm__ __volatile__ ("sync" : : : "memory"); } +static inline void isync(void) +{ + __asm__ __volatile__ ("isync" : : : "memory"); +} + /* Enforce in-order execution of data I/O. * No distinction between read/write on PPC; use eieio for all three. */ @@ -114,74 +119,90 @@ static inline void sync(void) /* * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. + * + * Read operations have additional twi & isync to make sure the read + * is actually performed (i.e. the data has come back) before we start + * executing any following instructions. */ -extern inline int in_8(volatile u8 *addr) +#define __iomem +extern inline int in_8(const volatile unsigned char __iomem *addr) { - int ret; + int ret; - __asm__ __volatile__("lbz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr)); - return ret; + __asm__ __volatile__( + "sync; lbz%U1%X1 %0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : "m" (*addr)); + return ret; } -extern inline void out_8(volatile u8 *addr, int val) +extern inline void out_8(volatile unsigned char __iomem *addr, int val) { - __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); + __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); } -extern inline int in_le16(volatile u16 *addr) +extern inline int in_le16(const volatile unsigned short __iomem *addr) { - int ret; + int ret; - __asm__ __volatile__("lhbrx %0,0,%1; eieio" : "=r" (ret) : - "r" (addr), "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lhbrx %0,0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : + "r" (addr), "m" (*addr)); + return ret; } -extern inline int in_be16(volatile u16 *addr) +extern inline int in_be16(const volatile unsigned short __iomem *addr) { - int ret; + int ret; - __asm__ __volatile__("lhz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : "m" (*addr)); + return ret; } -extern inline void out_le16(volatile u16 *addr, int val) +extern inline void out_le16(volatile unsigned short __iomem *addr, int val) { - __asm__ __volatile__("sthbrx %1,0,%2; eieio" : "=m" (*addr) : - "r" (val), "r" (addr)); + __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) : + "r" (val), "r" (addr)); } -extern inline void out_be16(volatile u16 *addr, int val) +extern inline void out_be16(volatile unsigned short __iomem *addr, int val) { - __asm__ __volatile__("sth%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); + __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); } -extern inline unsigned in_le32(volatile u32 *addr) +extern inline unsigned in_le32(const volatile unsigned __iomem *addr) { - unsigned ret; + unsigned ret; - __asm__ __volatile__("lwbrx %0,0,%1; eieio" : "=r" (ret) : - "r" (addr), "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lwbrx %0,0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : + "r" (addr), "m" (*addr)); + return ret; } -extern inline unsigned in_be32(volatile u32 *addr) +extern inline unsigned in_be32(const volatile unsigned __iomem *addr) { - unsigned ret; + unsigned ret; - __asm__ __volatile__("lwz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : "m" (*addr)); + return ret; } -extern inline void out_le32(volatile unsigned *addr, int val) +extern inline void out_le32(volatile unsigned __iomem *addr, int val) { - __asm__ __volatile__("stwbrx %1,0,%2; eieio" : "=m" (*addr) : - "r" (val), "r" (addr)); + __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) : + "r" (val), "r" (addr)); } -extern inline void out_be32(volatile unsigned *addr, int val) +extern inline void out_be32(volatile unsigned __iomem *addr, int val) { - __asm__ __volatile__("stw%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); + __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); } #endif -- cgit v1.2.1 From cf959c7d6687567c308e366e9581e1a5aff5cc5b Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 1 Jun 2007 15:27:11 +0200 Subject: ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board This patch adds NAND booting support for the AMCC Bamboo eval board. Since the NAND-SPL boot image is limited to 4kbytes, this version only supports the onboard 64MBytes of DDR. The DIMM modules can't be supported, since the setup code for I2C DIMM autodetection and configuration is too big for this NAND bootloader. Signed-off-by: Stefan Roese --- include/configs/bamboo.h | 88 +++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 76 insertions(+), 12 deletions(-) (limited to 'include') diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index db58a9fa74..763d1c7a8b 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -50,7 +50,7 @@ *----------------------------------------------------------------------*/ #define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ -#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) +#define CFG_MONITOR_BASE TEXT_BASE #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ #define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */ #define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/ @@ -104,14 +104,11 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -/* - * Define here the location of the environment variables (FLASH or EEPROM). - * Note: DENX encourages to use redundant environment in FLASH. - */ -#if 1 +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #else -#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ #endif /*----------------------------------------------------------------------- @@ -133,7 +130,7 @@ #ifdef CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ @@ -141,22 +138,89 @@ #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif /* CFG_ENV_IS_IN_FLASH */ +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 4k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 4kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + * On 440EPx the SPL is copied to SDRAM before the NAND controller is + * set up. While still running from cache, I experienced problems accessing + * the NAND controller. sr - 2006-08-25 + */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST 0x00800000 /* Copy SPL here */ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ + +/* + * Now the NAND chip has to be defined (no autodetection used!) + */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ +#define CFG_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */ + +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + +#ifdef CFG_ENV_IS_IN_NAND +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) +#endif + /*----------------------------------------------------------------------- * NAND FLASH *----------------------------------------------------------------------*/ -#define CFG_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CFG_NAND_CS 1 +#define CFG_MAX_NAND_DEVICE 2 +#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE #define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE, CFG_NAND_ADDR + 2 } #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_NAND_CS 1 +#else +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NAND-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x018003c0 +#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) +#endif + /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------------- */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #undef CONFIG_DDR_ECC /* don't use ECC */ #define CFG_SIMULATE_SPD_EEPROM 0xff /* simulate spd eeprom on this address */ -#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51} +#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51} +#define CFG_MBYTES_SDRAM (64) /* 64MB fixed size for early-sdram-init */ /*----------------------------------------------------------------------- * I2C -- cgit v1.2.1 From 9d9096043e8f713d4bf1743d32e1459e6a11644b Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 1 Jun 2007 15:29:04 +0200 Subject: ppc4xx: Update Sequoia NAND booting support with ECC Signed-off-by: Stefan Roese --- include/configs/sequoia.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 1f19621f44..0b808887b4 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -166,12 +166,19 @@ /* * Now the NAND chip has to be defined (no autodetection used!) */ -#define CFG_NAND_PAGE_SIZE (512) /* NAND chip page size */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ #define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ -#define CFG_NAND_PAGE_COUNT (32) /* NAND chip page count */ -#define CFG_NAND_BAD_BLOCK_POS (5) /* Location of bad block marker */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ #undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + #ifdef CFG_ENV_IS_IN_NAND /* * For NAND booting the environment is embedded in the U-Boot image. Please take -- cgit v1.2.1