From 71f9511803de65a3b98d2f592d418da1d1539f13 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 15 Jun 2003 22:40:42 +0000 Subject: * Fix CONFIG_NET_MULTI support in include/net.h * Patches by Kyle Harris, 13 Mar 2003: - Add FAT partition support - Add command support for FAT - Add command support for MMC ---- - Add Intel PXA support for video - Add Intel PXA support for MMC ---- - Enable MMC and FAT for lubbock board - Other misc changes for lubbock board --- include/asm-arm/arch-pxa/mmc.h | 200 +++++++++++++++++ include/asm-arm/errno.h | 138 ++++++++++++ include/asm-arm/global_data.h | 2 +- include/cmd_confdefs.h | 4 + include/cmd_fat.h | 61 ++++++ include/cmd_mmc.h | 41 ++++ include/common.h | 16 +- include/commproc.h | 24 +- include/configs/LANTEC.h | 1 + include/configs/MPC8260ADS.h | 1 + include/configs/MPC8266ADS.h | 1 + include/configs/RBC823.h | 1 + include/configs/TQM862L.h | 9 +- include/configs/TQM862M.h | 484 +++++++++++++++++++++++++++++++++++++++++ include/configs/ep8260.h | 1 + include/configs/hymod.h | 1 + include/configs/lubbock.h | 227 ++++++++++--------- include/fat.h | 208 ++++++++++++++++++ include/flash.h | 5 + include/mmc.h | 33 +++ include/net.h | 12 +- 21 files changed, 1337 insertions(+), 133 deletions(-) create mode 100644 include/asm-arm/arch-pxa/mmc.h create mode 100644 include/asm-arm/errno.h create mode 100644 include/cmd_fat.h create mode 100644 include/cmd_mmc.h create mode 100644 include/configs/TQM862M.h create mode 100644 include/fat.h create mode 100644 include/mmc.h (limited to 'include') diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h new file mode 100644 index 0000000000..4d61adeaf6 --- /dev/null +++ b/include/asm-arm/arch-pxa/mmc.h @@ -0,0 +1,200 @@ +/* + * linux/drivers/mmc/mmc_pxa.h + * + * Author: Vladimir Shebordaev, Igor Oblakov + * Copyright: MontaVista Software Inc. + * + * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __MMC_PXA_P_H__ +#define __MMC_PXA_P_H__ + +/* PXA-250 MMC controller registers */ + +/* MMC_STRPCL */ +#define MMC_STRPCL_STOP_CLK (0x0001UL) +#define MMC_STRPCL_START_CLK (0x0002UL) + +/* MMC_STAT */ +#define MMC_STAT_END_CMD_RES (0x0001UL << 13) +#define MMC_STAT_PRG_DONE (0x0001UL << 12) +#define MMC_STAT_DATA_TRAN_DONE (0x0001UL << 11) +#define MMC_STAT_CLK_EN (0x0001UL << 8) +#define MMC_STAT_RECV_FIFO_FULL (0x0001UL << 7) +#define MMC_STAT_XMIT_FIFO_EMPTY (0x0001UL << 6) +#define MMC_STAT_RES_CRC_ERROR (0x0001UL << 5) +#define MMC_STAT_SPI_READ_ERROR_TOKEN (0x0001UL << 4) +#define MMC_STAT_CRC_READ_ERROR (0x0001UL << 3) +#define MMC_STAT_CRC_WRITE_ERROR (0x0001UL << 2) +#define MMC_STAT_TIME_OUT_RESPONSE (0x0001UL << 1) +#define MMC_STAT_READ_TIME_OUT (0x0001UL) + +#define MMC_STAT_ERRORS (MMC_STAT_RES_CRC_ERROR|MMC_STAT_SPI_READ_ERROR_TOKEN\ + |MMC_STAT_CRC_READ_ERROR|MMC_STAT_TIME_OUT_RESPONSE\ + |MMC_STAT_READ_TIME_OUT|MMC_STAT_CRC_WRITE_ERROR) + +/* MMC_CLKRT */ +#define MMC_CLKRT_20MHZ (0x0000UL) +#define MMC_CLKRT_10MHZ (0x0001UL) +#define MMC_CLKRT_5MHZ (0x0002UL) +#define MMC_CLKRT_2_5MHZ (0x0003UL) +#define MMC_CLKRT_1_25MHZ (0x0004UL) +#define MMC_CLKRT_0_625MHZ (0x0005UL) +#define MMC_CLKRT_0_3125MHZ (0x0006UL) + +/* MMC_SPI */ +#define MMC_SPI_DISABLE (0x00UL) +#define MMC_SPI_EN (0x01UL) +#define MMC_SPI_CS_EN (0x01UL << 2) +#define MMC_SPI_CS_ADDRESS (0x01UL << 3) +#define MMC_SPI_CRC_ON (0x01UL << 1) + +/* MMC_CMDAT */ +#define MMC_CMDAT_MMC_DMA_EN (0x0001UL << 7) +#define MMC_CMDAT_INIT (0x0001UL << 6) +#define MMC_CMDAT_BUSY (0x0001UL << 5) +#define MMC_CMDAT_STREAM (0x0001UL << 4) +#define MMC_CMDAT_BLOCK (0x0000UL << 4) +#define MMC_CMDAT_WRITE (0x0001UL << 3) +#define MMC_CMDAT_READ (0x0000UL << 3) +#define MMC_CMDAT_DATA_EN (0x0001UL << 2) +#define MMC_CMDAT_R1 (0x0001UL) +#define MMC_CMDAT_R2 (0x0002UL) +#define MMC_CMDAT_R3 (0x0003UL) + +/* MMC_RESTO */ +#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */ + +/* MMC_RDTO */ +#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */ + +/* MMC_BLKLEN */ +#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */ + +/* MMC_PRTBUF */ +#define MMC_PRTBUF_BUF_PART_FULL (0x01UL) +#define MMC_PRTBUF_BUF_FULL (0x00UL ) + +/* MMC_I_MASK */ +#define MMC_I_MASK_TXFIFO_WR_REQ (0x01UL << 6) +#define MMC_I_MASK_RXFIFO_RD_REQ (0x01UL << 5) +#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4) +#define MMC_I_MASK_STOP_CMD (0x01UL << 3) +#define MMC_I_MASK_END_CMD_RES (0x01UL << 2) +#define MMC_I_MASK_PRG_DONE (0x01UL << 1) +#define MMC_I_MASK_DATA_TRAN_DONE (0x01UL) +#define MMC_I_MASK_ALL (0x07fUL) + + +/* MMC_I_REG */ +#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6) +#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5) +#define MMC_I_REG_CLK_IS_OFF (0x01UL << 4) +#define MMC_I_REG_STOP_CMD (0x01UL << 3) +#define MMC_I_REG_END_CMD_RES (0x01UL << 2) +#define MMC_I_REG_PRG_DONE (0x01UL << 1) +#define MMC_I_REG_DATA_TRAN_DONE (0x01UL) +#define MMC_I_REG_ALL (0x007fUL) + +/* MMC_CMD */ +#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */ +#define CMD(x) (x) + +#define MMC_DEFAULT_RCA 1 + +#define MMC_BLOCK_SIZE 512 +#define MMC_CMD_RESET 0 +#define MMC_CMD_SEND_OP_COND 1 +#define MMC_CMD_ALL_SEND_CID 2 +#define MMC_CMD_SET_RCA 3 +#define MMC_CMD_SEND_CSD 9 +#define MMC_CMD_SEND_CID 10 +#define MMC_CMD_SEND_STATUS 13 +#define MMC_CMD_SET_BLOCKLEN 16 +#define MMC_CMD_READ_BLOCK 17 +#define MMC_CMD_RD_BLK_MULTI 18 +#define MMC_CMD_WRITE_BLOCK 24 + +#define MMC_MAX_BLOCK_SIZE 512 + +#define MMC_R1_IDLE_STATE 0x01 +#define MMC_R1_ERASE_STATE 0x02 +#define MMC_R1_ILLEGAL_CMD 0x04 +#define MMC_R1_COM_CRC_ERR 0x08 +#define MMC_R1_ERASE_SEQ_ERR 0x01 +#define MMC_R1_ADDR_ERR 0x02 +#define MMC_R1_PARAM_ERR 0x04 + +#define MMC_R1B_WP_ERASE_SKIP 0x0002 +#define MMC_R1B_ERR 0x0004 +#define MMC_R1B_CC_ERR 0x0008 +#define MMC_R1B_CARD_ECC_ERR 0x0010 +#define MMC_R1B_WP_VIOLATION 0x0020 +#define MMC_R1B_ERASE_PARAM 0x0040 +#define MMC_R1B_OOR 0x0080 +#define MMC_R1B_IDLE_STATE 0x0100 +#define MMC_R1B_ERASE_RESET 0x0200 +#define MMC_R1B_ILLEGAL_CMD 0x0400 +#define MMC_R1B_COM_CRC_ERR 0x0800 +#define MMC_R1B_ERASE_SEQ_ERR 0x1000 +#define MMC_R1B_ADDR_ERR 0x2000 +#define MMC_R1B_PARAM_ERR 0x4000 + +typedef struct mmc_cid +{ +/* FIXME: BYTE_ORDER */ + uchar year:4, + month:4; + uchar sn[3]; + uchar fwrev:4, + hwrev:4; + uchar name[6]; + uchar id[3]; +} mmc_cid_t; + +typedef struct mmc_csd +{ + uchar ecc:2, + file_format:2, + tmp_write_protect:1, + perm_write_protect:1, + copy:1, + file_format_grp:1; + uint64_t content_prot_app:1, + rsvd3:4, + write_bl_partial:1, + write_bl_len:4, + r2w_factor:3, + default_ecc:2, + wp_grp_enable:1, + wp_grp_size:5, + erase_grp_mult:5, + erase_grp_size:5, + c_size_mult1:3, + vdd_w_curr_max:3, + vdd_w_curr_min:3, + vdd_r_curr_max:3, + vdd_r_curr_min:3, + c_size:12, + rsvd2:2, + dsr_imp:1, + read_blk_misalign:1, + write_blk_misalign:1, + read_bl_partial:1; + + ushort read_bl_len:4, + ccc:12; + uchar tran_speed; + uchar nsac; + uchar taac; + uchar rsvd1:2, + spec_vers:4, + csd_structure:2; +} mmc_csd_t; + + +#endif /* __MMC_PXA_P_H__ */ diff --git a/include/asm-arm/errno.h b/include/asm-arm/errno.h new file mode 100644 index 0000000000..134a8fc99c --- /dev/null +++ b/include/asm-arm/errno.h @@ -0,0 +1,138 @@ +#ifndef _ARM_ERRNO_H +#define _ARM_ERRNO_H + +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Arg list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ +#define ECHILD 10 /* No child processes */ +#define EAGAIN 11 /* Try again */ +#define ENOMEM 12 /* Out of memory */ +#define EACCES 13 /* Permission denied */ +#define EFAULT 14 /* Bad address */ +#define ENOTBLK 15 /* Block device required */ +#define EBUSY 16 /* Device or resource busy */ +#define EEXIST 17 /* File exists */ +#define EXDEV 18 /* Cross-device link */ +#define ENODEV 19 /* No such device */ +#define ENOTDIR 20 /* Not a directory */ +#define EISDIR 21 /* Is a directory */ +#define EINVAL 22 /* Invalid argument */ +#define ENFILE 23 /* File table overflow */ +#define EMFILE 24 /* Too many open files */ +#define ENOTTY 25 /* Not a typewriter */ +#define ETXTBSY 26 /* Text file busy */ +#define EFBIG 27 /* File too large */ +#define ENOSPC 28 /* No space left on device */ +#define ESPIPE 29 /* Illegal seek */ +#define EROFS 30 /* Read-only file system */ +#define EMLINK 31 /* Too many links */ +#define EPIPE 32 /* Broken pipe */ +#define EDOM 33 /* Math argument out of domain of func */ +#define ERANGE 34 /* Math result not representable */ +#define EDEADLK 35 /* Resource deadlock would occur */ +#define ENAMETOOLONG 36 /* File name too long */ +#define ENOLCK 37 /* No record locks available */ +#define ENOSYS 38 /* Function not implemented */ +#define ENOTEMPTY 39 /* Directory not empty */ +#define ELOOP 40 /* Too many symbolic links encountered */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define ENOMSG 42 /* No message of desired type */ +#define EIDRM 43 /* Identifier removed */ +#define ECHRNG 44 /* Channel number out of range */ +#define EL2NSYNC 45 /* Level 2 not synchronized */ +#define EL3HLT 46 /* Level 3 halted */ +#define EL3RST 47 /* Level 3 reset */ +#define ELNRNG 48 /* Link number out of range */ +#define EUNATCH 49 /* Protocol driver not attached */ +#define ENOCSI 50 /* No CSI structure available */ +#define EL2HLT 51 /* Level 2 halted */ +#define EBADE 52 /* Invalid exchange */ +#define EBADR 53 /* Invalid request descriptor */ +#define EXFULL 54 /* Exchange full */ +#define ENOANO 55 /* No anode */ +#define EBADRQC 56 /* Invalid request code */ +#define EBADSLT 57 /* Invalid slot */ +#define EDEADLOCK 58 /* File locking deadlock error */ +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EMULTIHOP 72 /* Multihop attempted */ +#define EDOTDOT 73 /* RFS specific error */ +#define EBADMSG 74 /* Not a data message */ +#define EOVERFLOW 75 /* Value too large for defined data type */ +#define ENOTUNIQ 76 /* Name not unique on network */ +#define EBADFD 77 /* File descriptor in bad state */ +#define EREMCHG 78 /* Remote address changed */ +#define ELIBACC 79 /* Can not access a needed shared library */ +#define ELIBBAD 80 /* Accessing a corrupted shared library */ +#define ELIBSCN 81 /* .lib section in a.out corrupted */ +#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 83 /* Cannot exec a shared library directly */ +#define EILSEQ 84 /* Illegal byte sequence */ +#define ERESTART 85 /* Interrupted system call should be restarted */ +#define ESTRPIPE 86 /* Streams pipe error */ +#define EUSERS 87 /* Too many users */ +#define ENOTSOCK 88 /* Socket operation on non-socket */ +#define EDESTADDRREQ 89 /* Destination address required */ +#define EMSGSIZE 90 /* Message too long */ +#define EPROTOTYPE 91 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 92 /* Protocol not available */ +#define EPROTONOSUPPORT 93 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ +#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 96 /* Protocol family not supported */ +#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ +#define EADDRINUSE 98 /* Address already in use */ +#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ +#define ENETDOWN 100 /* Network is down */ +#define ENETUNREACH 101 /* Network is unreachable */ +#define ENETRESET 102 /* Network dropped connection because of reset */ +#define ECONNABORTED 103 /* Software caused connection abort */ +#define ECONNRESET 104 /* Connection reset by peer */ +#define ENOBUFS 105 /* No buffer space available */ +#define EISCONN 106 /* Transport endpoint is already connected */ +#define ENOTCONN 107 /* Transport endpoint is not connected */ +#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 109 /* Too many references: cannot splice */ +#define ETIMEDOUT 110 /* Connection timed out */ +#define ECONNREFUSED 111 /* Connection refused */ +#define EHOSTDOWN 112 /* Host is down */ +#define EHOSTUNREACH 113 /* No route to host */ +#define EALREADY 114 /* Operation already in progress */ +#define EINPROGRESS 115 /* Operation now in progress */ +#define ESTALE 116 /* Stale NFS file handle */ +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ +#define EDQUOT 122 /* Quota exceeded */ + +#define ENOMEDIUM 123 /* No medium found */ +#define EMEDIUMTYPE 124 /* Wrong medium type */ + +/* Should never be seen by user programs */ +#define ERESTARTSYS 512 +#define ERESTARTNOINTR 513 +#define ERESTARTNOHAND 514 /* restart if no handler.. */ +#define ENOIOCTLCMD 515 /* No ioctl command */ + +#define _LAST_ERRNO 515 + +#endif diff --git a/include/asm-arm/global_data.h b/include/asm-arm/global_data.h index 892710df40..c804768d7a 100644 --- a/include/asm-arm/global_data.h +++ b/include/asm-arm/global_data.h @@ -41,8 +41,8 @@ typedef struct global_data { unsigned long reloc_off; /* Relocation Offset */ unsigned long env_addr; /* Address of Environment struct */ unsigned long env_valid; /* Checksum of Environment valid? */ -#ifdef CONFIG_VFD unsigned long fb_base; /* base address of frame buffer */ +#ifdef CONFIG_VFD unsigned char vfd_type; /* display type */ #endif #if 0 diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h index 7ab553d317..2d9b5a554d 100644 --- a/include/cmd_confdefs.h +++ b/include/cmd_confdefs.h @@ -82,6 +82,8 @@ #define CFG_CMD_BMP 0x0001000000000000 /* BMP support */ #define CFG_CMD_PORTIO 0x0002000000000000 /* Port I/O */ #define CFG_CMD_PING 0x0004000000000000 /* ping support */ +#define CFG_CMD_MMC 0x0008000000000000 /* MMC support */ +#define CFG_CMD_FAT 0x0010000000000000 /* FAT support */ #define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFF /* ALL commands */ @@ -102,6 +104,7 @@ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ CFG_CMD_FDC | \ + CFG_CMD_FAT | \ CFG_CMD_FDOS | \ CFG_CMD_HWFLOW | \ CFG_CMD_I2C | \ @@ -111,6 +114,7 @@ CFG_CMD_JFFS2 | \ CFG_CMD_KGDB | \ CFG_CMD_MII | \ + CFG_CMD_MMC | \ CFG_CMD_NAND | \ CFG_CMD_PCI | \ CFG_CMD_PCMCIA | \ diff --git a/include/cmd_fat.h b/include/cmd_fat.h new file mode 100644 index 0000000000..12245bd411 --- /dev/null +++ b/include/cmd_fat.h @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2002 + * Richard Jones, rjones@nexus-tech.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * FAT support + */ +#ifndef _CMD_FAT_H +#define _CMD_FAT_H + +#if (CONFIG_COMMANDS & CFG_CMD_FAT) + +int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +int do_fat_dump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#define CMD_TBL_FAT MK_CMD_TBL_ENTRY( \ + "fatload", 5, 4, 0, do_fat_fsload, \ + "fatload - load binary file from a dos filesystem\n", \ + "[ off ] [ filename ]\n" \ + " - load binary file from dos filesystem\n" \ + " with offset 'off'\n" \ +), \ + MK_CMD_TBL_ENTRY( \ + "fatinfo", 5, 1, 1, do_fat_fsinfo, \ + "fatinfo - print information about filesystem\n", \ + "\n" \ + " - print information about filesystem\n" \ +), \ + MK_CMD_TBL_ENTRY( \ + "fatls", 2, 2, 1, do_fat_ls, \ + "fatls - list files in a directory (default /)\n", \ + "[ directory ]\n" \ + " - list files in a directory.\n" \ +), + +#else +#define CMD_TBL_FAT +#endif /* CFG_CMD_FAT */ + +#endif /* _CMD_FAT_H */ diff --git a/include/cmd_mmc.h b/include/cmd_mmc.h new file mode 100644 index 0000000000..ff5a176fed --- /dev/null +++ b/include/cmd_mmc.h @@ -0,0 +1,41 @@ +/* + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CMD_MMC_H_ +#define _CMD_MMC_H_ + +#include + +#if (CONFIG_COMMANDS & CFG_CMD_MMC) + +#define CMD_TBL_MMC MK_CMD_TBL_ENTRY( \ + "mmcinit", 4, 1, 0, do_mmc, \ + "mmcinit - init mmc card\n", \ +), +#else + +#define CMD_TBL_MMC + +#endif + +int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); + +#endif /* _CMD_MMC_H_ */ diff --git a/include/common.h b/include/common.h index 0a252c53fc..d312682cff 100644 --- a/include/common.h +++ b/include/common.h @@ -73,10 +73,21 @@ typedef void (interrupt_handler_t)(void *); #include /* boot information for Linux kernel */ #include /* global data used for startup functions */ -/* enable common handling for all TQM8xxL boards */ +/* + * enable common handling for all TQM8xxL/M boards: + * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards + * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards + */ +#if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \ + defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \ + defined(CONFIG_TQM862M) +# ifndef CONFIG_TQM8xxM +# define CONFIG_TQM8xxM +# endif +#endif #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \ defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \ - defined(CONFIG_TQM862L) + defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) # ifndef CONFIG_TQM8xxL # define CONFIG_TQM8xxL # endif @@ -237,6 +248,7 @@ void load_sernum_ethaddr (void); /* $(BOARD)/$(BOARD).c */ int board_pre_init (void); +int board_post_init (void); int board_postclk_init (void); /* after clocks/timebase, before env/serial */ void board_poweroff (void); diff --git a/include/commproc.h b/include/commproc.h index 2d9ab5cdb3..f0ee1792b2 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -1331,15 +1331,13 @@ typedef struct scc_enet { #endif /* CONFIG_SXNI855T */ -/*** MVS1, TQM823L, TQM850L, ETX094, R360MPI ***********************/ +/*** MVS1, TQM823L/M, TQM850L/M, ETX094, R360MPI *******************/ #if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \ - defined(CONFIG_R360MPI) || \ - defined(CONFIG_RBC823) || \ - defined(CONFIG_TQM823L) || \ - defined(CONFIG_TQM850L) || \ - defined(CONFIG_ETX094) || \ - defined(CONFIG_RRVISION)|| \ + defined(CONFIG_R360MPI) || defined(CONFIG_RBC823) || \ + defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \ + defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \ + defined(CONFIG_ETX094) || defined(CONFIG_RRVISION)|| \ (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2) /* Bits in parallel I/O port registers that have to be set/cleared * to configure the pins for SCC2 use. @@ -1365,13 +1363,13 @@ typedef struct scc_enet { */ #define SICR_ENET_MASK ((uint)0x0000ff00) #define SICR_ENET_CLKRT ((uint)0x00002600) -#endif /* CONFIG_MVS v1, CONFIG_TQM823L, CONFIG_TQM850L, etc. */ +#endif /* CONFIG_MVS v1, CONFIG_TQM823L/M, CONFIG_TQM850L/M, etc. */ -/*** TQM855L, TQM860L, TQM862L **************************************/ +/*** TQM855L/M, TQM860L/M, TQM862L/M ********************************/ -#if defined(CONFIG_TQM855L) || \ - defined(CONFIG_TQM860L) || \ - defined(CONFIG_TQM862L) +#if defined(CONFIG_TQM855L) || defined(CONFIG_TQM855M) || \ + defined(CONFIG_TQM860L) || defined(CONFIG_TQM860M) || \ + defined(CONFIG_TQM862L) || defined(CONFIG_TQM862M) # ifdef CONFIG_SCC1_ENET /* use SCC for 10Mbps Ethernet */ @@ -1419,7 +1417,7 @@ typedef struct scc_enet { #define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ # endif /* CONFIG_FEC_ENET */ -#endif /* CONFIG_TQM855L, TQM860L, TQM862L */ +#endif /* CONFIG_TQM855L/M, TQM860L/M, TQM862L/M */ /*** V37 **********************************************************/ diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h index 81e2079113..56ecf0c8bf 100644 --- a/include/configs/LANTEC.h +++ b/include/configs/LANTEC.h @@ -99,6 +99,7 @@ & ~CFG_CMD_JFFS2 \ & ~CFG_CMD_KGDB \ & ~CFG_CMD_MII \ + & ~CFG_CMD_MMC \ & ~CFG_CMD_NAND \ & ~CFG_CMD_PCI \ & ~CFG_CMD_PCMCIA \ diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 1849bcc1ec..30b72076ea 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -129,6 +129,7 @@ CFG_CMD_KGDB | \ CFG_CMD_NAND | \ CFG_CMD_MII | \ + CFG_CMD_MMC | \ CFG_CMD_PCI | \ CFG_CMD_PCMCIA | \ CFG_CMD_SCSI | \ diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 414d515b7a..9e8d732e2b 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -161,6 +161,7 @@ CFG_CMD_IDE | \ CFG_CMD_JFFS2 | \ CFG_CMD_KGDB | \ + CFG_CMD_MMC | \ CFG_CMD_NAND | \ CFG_CMD_PCMCIA | \ CFG_CMD_SCSI | \ diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h index 08eed276c2..af6e98b1f0 100644 --- a/include/configs/RBC823.h +++ b/include/configs/RBC823.h @@ -113,6 +113,7 @@ ~CFG_CMD_JFFS2 & \ ~CFG_CMD_DTT & \ ~CFG_CMD_MII & \ + ~CFG_CMD_MMC & \ /*~CFG_CMD_NET &*/ \ /*~CFG_CMD_ELF &*/ \ /* ~CFG_CMD_EEPROM & */ \ diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 1d0aea1fec..76e66cac1c 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -179,6 +179,7 @@ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ #define CFG_ENV_IS_IN_FLASH 1 + #define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ @@ -335,7 +336,7 @@ */ #define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */ /* used to re-map FLASH both when starting from SRAM or FLASH: * restrict access enough to keep SRAM working (if any) @@ -349,10 +350,8 @@ */ #if defined(CONFIG_100MHz) /* 100 MHz CPU - 50 MHz bus: - * 0x...926: 9 = OR_CSNT_SAM + OR_BI; 2 = OR_SCY_2_CLK; 6 = OR_TRLX + OR_EHTR - * ACS = 00, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1 */ -#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ - OR_SCY_2_CLK | OR_EHTR | OR_BI) + * ACS = 01, TRLX = 0, CSNT = 0, SCY = 7, EHTR = 0 */ +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV4 | OR_SCY_7_CLK | OR_BI) #elif defined(CONFIG_80MHz) /* 80 MHz CPU - 40 MHz bus: * ACS = 00, TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */ diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h new file mode 100644 index 0000000000..1da9a45cf2 --- /dev/null +++ b/include/configs/TQM862M.h @@ -0,0 +1,484 @@ +/* + * (C) Copyright 2000, 2001, 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC860 1 +#define CONFIG_MPC860T 1 +#define CONFIG_MPC862 1 + +#define CONFIG_TQM862M 1 /* ...on a TQM8xxM module */ + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_NONE + +#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ + +#define CONFIG_BOARD_TYPES 1 /* support board types */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/TQM862M/uImage\0" \ + "kernel_addr=40080000\0" \ + "ramdisk_addr=40180000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ + +#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_IDE | \ + CFG_CMD_DATE ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if 0 +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#endif +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFFF00000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x40000000 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * Hardware Information Block + */ +#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ +#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */ +#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#ifndef CONFIG_CAN_DRIVER +#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#else /* we must activate GPL5 in the SIUMCR for CAN */ +#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#endif /* CONFIG_CAN_DRIVER */ + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + */ +#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit + * + * If this is a 80 MHz or 100 MHz CPU, + * set PLL multiplication factor to 5 (5 * 16 = 80, 5 * 20 = 100) + */ +#if defined(CONFIG_80MHz) || defined(CONFIG_100MHz) +#define CFG_PLPRCR \ + ( (5-1)< ms + * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration + * 4 Number of refresh cycles per period + * 64 Refresh cycle in ms per number of rows + * -------------------------------------------- + * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 + * + * 50 MHz => 50.000.000 / Divider = 98 + * 66 Mhz => 66.000.000 / Divider = 129 + * 80 Mhz => 80.000.000 / Divider = 156 + * 100 Mhz => 100.000.000 / Divider = 195 + */ +#if defined(CONFIG_100MHz) +#define CFG_MAMR_PTA 195 +#elif defined(CONFIG_80MHz) +#define CFG_MAMR_PTA 156 +#elif defined(CONFIG_66MHz) +#define CFG_MAMR_PTA 129 +#else /* 50 MHz */ +#define CFG_MAMR_PTA 98 +#endif /*CONFIG_??MHz */ + +/* + * For 16 MBit, refresh rates could be 31.3 us + * (= 64 ms / 2K = 125 / quad bursts). + * For a simpler initialization, 15.6 us is used instead. + * + * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks + * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank + */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ + +/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + +/* + * MAMR settings for SDRAM + */ + +/* 8 column SDRAM */ +#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) +/* 9 column SDRAM */ +#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_NET_MULTI +#define CONFIG_SCC1_ENET +#define CONFIG_FEC_ENET +#define CONFIG_ETHPRIME "SCC ETHERNET" + +#endif /* __CONFIG_H */ diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 21b9d763c9..b933be9d3d 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -283,6 +283,7 @@ ~CFG_CMD_JFFS2 & \ ~CFG_CMD_KGDB & \ ~CFG_CMD_MII & \ + ~CFG_CMD_MMC & \ ~CFG_CMD_NAND & \ ~CFG_CMD_PCI & \ ~CFG_CMD_PCMCIA & \ diff --git a/include/configs/hymod.h b/include/configs/hymod.h index df89715635..e3a0ee3aeb 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -148,6 +148,7 @@ CFG_CMD_JFFS2 | \ CFG_CMD_NAND | \ CFG_CMD_MII | \ + CFG_CMD_MMC | \ CFG_CMD_PCMCIA | \ CFG_CMD_PCI | \ CFG_CMD_USB | \ diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index ba55af1bde..609ce339ae 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -18,7 +18,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -34,21 +34,24 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ /* * High Level Configuration Options * (easy to change) */ -#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ -#define CONFIG_LUBBOCK 1 /* on an LUBBOCK Board */ +#define CONFIG_PXA250 1 /* This is an PXA250 CPU */ +#define CONFIG_LUBBOCK 1 /* on an LUBBOCK Board */ +#define CONFIG_LCD 1 +#define CONFIG_MMC 1 +#define BOARD_POST_INIT 1 -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) /* * Hardware drivers @@ -59,166 +62,176 @@ /* * select serial console configuration */ -#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */ +#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */ /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ETHADDR 08:00:3e:26:0a:5b -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_IPADDR 192.168.0.21 -#define CONFIG_SERVERIP 192.168.0.250 -#define CONFIG_BOOTCOMMAND "bootm 40000" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" -#define CONFIG_CMDLINE_TAG +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_IPADDR 192.168.0.21 +#define CONFIG_SERVERIP 192.168.0.250 +#define CONFIG_BOOTCOMMAND "bootm 40000" +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" +#define CONFIG_CMDLINE_TAG #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ -#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CFG_LOAD_ADDR 0xa8000000 /* default load address */ -#define CFG_LOAD_ADDR 0xa8000000 /* default load address */ +#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_MMC_BASE 0xF0000000 /* * Stack sizes * * The stack sizes are set up in start.S using the settings below */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ #endif /* * Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CFG_DRAM_BASE 0xa0000000 -#define CFG_DRAM_SIZE 0x04000000 - -#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ +#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ + +#define CFG_DRAM_BASE 0xa0000000 +#define CFG_DRAM_SIZE 0x04000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 #define FPGA_REGS_BASE_PHYSICAL 0x08000000 /* * GPIO settings */ -#define CFG_GPSR0_VAL 0x00008000 -#define CFG_GPSR1_VAL 0x00FC0382 -#define CFG_GPSR2_VAL 0x0001FFFF -#define CFG_GPCR0_VAL 0x00000000 -#define CFG_GPCR1_VAL 0x00000000 -#define CFG_GPCR2_VAL 0x00000000 -#define CFG_GPDR0_VAL 0x0060A800 -#define CFG_GPDR1_VAL 0x00FF0382 -#define CFG_GPDR2_VAL 0x0001C000 -#define CFG_GAFR0_L_VAL 0x98400000 -#define CFG_GAFR0_U_VAL 0x00002950 -#define CFG_GAFR1_L_VAL 0x000A9558 -#define CFG_GAFR1_U_VAL 0x0005AAAA -#define CFG_GAFR2_L_VAL 0xA0000000 -#define CFG_GAFR2_U_VAL 0x00000002 - -#define CFG_PSSR_VAL 0x20 +#define CFG_GPSR0_VAL 0x00008000 +#define CFG_GPSR1_VAL 0x00FC0382 +#define CFG_GPSR2_VAL 0x0001FFFF +#define CFG_GPCR0_VAL 0x00000000 +#define CFG_GPCR1_VAL 0x00000000 +#define CFG_GPCR2_VAL 0x00000000 +#define CFG_GPDR0_VAL 0x0060A800 +#define CFG_GPDR1_VAL 0x00FF0382 +#define CFG_GPDR2_VAL 0x0001C000 +#define CFG_GAFR0_L_VAL 0x98400000 +#define CFG_GAFR0_U_VAL 0x00002950 +#define CFG_GAFR1_L_VAL 0x000A9558 +#define CFG_GAFR1_U_VAL 0x0005AAAA +#define CFG_GAFR2_L_VAL 0xA0000000 +#define CFG_GAFR2_U_VAL 0x00000002 + +#define CFG_PSSR_VAL 0x20 /* * Memory settings */ -#define CFG_MSC0_VAL 0x23F223F2 -#define CFG_MSC1_VAL 0x3FF1A441 -#define CFG_MSC2_VAL 0x7FF17FF1 -#define CFG_MDCNFG_VAL 0x00001AC9 -#define CFG_MDREFR_VAL 0x00018018 -#define CFG_MDMRS_VAL 0x00000000 +#define CFG_MSC0_VAL 0x23F223F2 +#define CFG_MSC1_VAL 0x3FF1A441 +#define CFG_MSC2_VAL 0x7FF97FF1 +#define CFG_MDCNFG_VAL 0x00001AC9 +#define CFG_MDREFR_VAL 0x00018018 +#define CFG_MDMRS_VAL 0x00000000 /* * PCMCIA and CF Interfaces */ -#define CFG_MECR_VAL 0x00000000 -#define CFG_MCMEM0_VAL 0x00010504 -#define CFG_MCMEM1_VAL 0x00010504 -#define CFG_MCATT0_VAL 0x00010504 -#define CFG_MCATT1_VAL 0x00010504 -#define CFG_MCIO0_VAL 0x00004715 -#define CFG_MCIO1_VAL 0x00004715 +#define CFG_MECR_VAL 0x00000000 +#define CFG_MCMEM0_VAL 0x00010504 +#define CFG_MCMEM1_VAL 0x00010504 +#define CFG_MCATT0_VAL 0x00010504 +#define CFG_MCATT1_VAL 0x00010504 +#define CFG_MCIO0_VAL 0x00004715 +#define CFG_MCIO1_VAL 0x00004715 -#define _LED 0x08000010 -#define LED_BLANK (0x08000040) +#define _LED 0x08000010 +#define LED_BLANK 0x08000040 /* * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ /* FIXME */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */ -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ /* * FPGA Offsets */ -#define WHOAMI_OFFSET 0x00 -#define HEXLED_OFFSET 0x10 -#define BLANKLED_OFFSET 0x40 -#define DISCRETELED_OFFSET 0x40 -#define CNFG_SWITCHES_OFFSET 0x50 -#define USER_SWITCHES_OFFSET 0x60 -#define MISC_WR_OFFSET 0x80 -#define MISC_RD_OFFSET 0x90 -#define INT_MASK_OFFSET 0xC0 -#define INT_CLEAR_OFFSET 0xD0 -#define GP_OFFSET 0x100 - -#endif /* __CONFIG_H */ +#define WHOAMI_OFFSET 0x00 +#define HEXLED_OFFSET 0x10 +#define BLANKLED_OFFSET 0x40 +#define DISCRETELED_OFFSET 0x40 +#define CNFG_SWITCHES_OFFSET 0x50 +#define USER_SWITCHES_OFFSET 0x60 +#define MISC_WR_OFFSET 0x80 +#define MISC_RD_OFFSET 0x90 +#define INT_MASK_OFFSET 0xC0 +#define INT_CLEAR_OFFSET 0xD0 +#define GP_OFFSET 0x100 + +#endif /* __CONFIG_H */ diff --git a/include/fat.h b/include/fat.h new file mode 100644 index 0000000000..b56219ced8 --- /dev/null +++ b/include/fat.h @@ -0,0 +1,208 @@ +/* + * R/O (V)FAT 12/16/32 filesystem implementation by Marcus Sundberg + * + * 2002-07-28 - rjones@nexus-tech.net - ported to ppcboot v1.1.6 + * 2003-03-10 - kharris@nexus-tech.net - ported to u-boot + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _FAT_H_ +#define _FAT_H_ + +#define CONFIG_SUPPORT_VFAT + +#define SECTOR_SIZE FS_BLOCK_SIZE + +#define FS_BLOCK_SIZE 512 + +#if FS_BLOCK_SIZE != SECTOR_SIZE +#error FS_BLOCK_SIZE != SECTOR_SIZE - This code needs to be fixed! +#endif + +#define MAX_CLUSTSIZE 65536 +#define DIRENTSPERBLOCK (FS_BLOCK_SIZE/sizeof(dir_entry)) +#define DIRENTSPERCLUST ((mydata->clust_size*SECTOR_SIZE)/sizeof(dir_entry)) + +#define FATBUFBLOCKS 6 +#define FATBUFSIZE (FS_BLOCK_SIZE*FATBUFBLOCKS) +#define FAT12BUFSIZE ((FATBUFSIZE*3)/2) +#define FAT16BUFSIZE (FATBUFSIZE/2) +#define FAT32BUFSIZE (FATBUFSIZE/4) + + +/* Filesystem identifiers */ +#define FAT12_SIGN "FAT12 " +#define FAT16_SIGN "FAT16 " +#define FAT32_SIGN "FAT32 " +#define SIGNLEN 8 + +/* File attributes */ +#define ATTR_RO 1 +#define ATTR_HIDDEN 2 +#define ATTR_SYS 4 +#define ATTR_VOLUME 8 +#define ATTR_DIR 16 +#define ATTR_ARCH 32 + +#define ATTR_VFAT (ATTR_RO | ATTR_HIDDEN | ATTR_SYS | ATTR_VOLUME) + +#define DELETED_FLAG ((char)0xe5) /* Marks deleted files when in name[0] */ +#define aRING 0x05 /* Used to represent 'å' in name[0] */ + + +/* Flags telling whether we should read a file or list a directory */ +#define LS_NO 0 +#define LS_YES 1 +#define LS_DIR 1 +#define LS_ROOT 2 + +#ifdef DEBUG +#define FAT_DPRINT(args...) printf(args) +#else +#define FAT_DPRINT(args...) +#endif +#define FAT_ERROR(arg) printf(arg) + +#define ISDIRDELIM(c) ((c) == '/' || (c) == '\\') + +#define FSTYPE_NONE (-1) + +#if defined(__linux__) && defined(__KERNEL__) +#define FAT2CPU16 le16_to_cpu +#define FAT2CPU32 le32_to_cpu +#else +#if 1 +#define FAT2CPU16(x) (x) +#define FAT2CPU32(x) (x) +#else +#define FAT2CPU16(x) ((((x) & 0x00ff) << 8) | (((x) & 0xff00) >> 8)) +#define FAT2CPU32(x) ((((x) & 0x000000ff) << 24) | \ + (((x) & 0x0000ff00) << 8) | \ + (((x) & 0x00ff0000) >> 8) | \ + (((x) & 0xff000000) >> 24)) +#endif +#endif + +#define TOLOWER(c) if((c) >= 'A' && (c) <= 'Z'){(c)+=('a' - 'A');} +#define START(dent) (FAT2CPU16((dent)->start) \ + + (mydata->fatsize != 32 ? 0 : \ + (FAT2CPU16((dent)->starthi) << 16))) + + +typedef struct boot_sector { + __u8 ignored[3]; /* Bootstrap code */ + char system_id[8]; /* Name of fs */ + __u8 sector_size[2]; /* Bytes/sector */ + __u8 cluster_size; /* Sectors/cluster */ + __u16 reserved; /* Number of reserved sectors */ + __u8 fats; /* Number of FATs */ + __u8 dir_entries[2]; /* Number of root directory entries */ + __u8 sectors[2]; /* Number of sectors */ + __u8 media; /* Media code */ + __u16 fat_length; /* Sectors/FAT */ + __u16 secs_track; /* Sectors/track */ + __u16 heads; /* Number of heads */ + __u32 hidden; /* Number of hidden sectors */ + __u32 total_sect; /* Number of sectors (if sectors == 0) */ + + /* FAT32 only */ + __u32 fat32_length; /* Sectors/FAT */ + __u16 flags; /* Bit 8: fat mirroring, low 4: active fat */ + __u8 version[2]; /* Filesystem version */ + __u32 root_cluster; /* First cluster in root directory */ + __u16 info_sector; /* Filesystem info sector */ + __u16 backup_boot; /* Backup boot sector */ + __u16 reserved2[6]; /* Unused */ +} boot_sector; + +typedef struct volume_info +{ + __u8 drive_number; /* BIOS drive number */ + __u8 reserved; /* Unused */ + __u8 ext_boot_sign; /* 0x29 if fields below exist (DOS 3.3+) */ + __u8 volume_id[4]; /* Volume ID number */ + char volume_label[11]; /* Volume label */ + char fs_type[8]; /* Typically FAT12, FAT16, or FAT32 */ + /* Boot code comes next, all but 2 bytes to fill up sector */ + /* Boot sign comes last, 2 bytes */ +} volume_info; + +typedef struct dir_entry { + char name[8],ext[3]; /* Name and extension */ + __u8 attr; /* Attribute bits */ + __u8 lcase; /* Case for base and extension */ + __u8 ctime_ms; /* Creation time, milliseconds */ + __u16 ctime; /* Creation time */ + __u16 cdate; /* Creation date */ + __u16 adate; /* Last access date */ + __u16 starthi; /* High 16 bits of cluster in FAT32 */ + __u16 time,date,start;/* Time, date and first cluster */ + __u32 size; /* File size in bytes */ +} dir_entry; + +typedef struct dir_slot { + __u8 id; /* Sequence number for slot */ + __u8 name0_4[10]; /* First 5 characters in name */ + __u8 attr; /* Attribute byte */ + __u8 reserved; /* Unused */ + __u8 alias_checksum;/* Checksum for 8.3 alias */ + __u8 name5_10[12]; /* 6 more characters in name */ + __u16 start; /* Unused */ + __u8 name11_12[4]; /* Last 2 characters in name */ +} dir_slot; + +/* Private filesystem parameters */ +typedef struct { + int fatsize; /* Size of FAT in bits */ + __u16 fatlength; /* Length of FAT in sectors */ + __u16 fat_sect; /* Starting sector of the FAT */ + __u16 rootdir_sect; /* Start sector of root directory */ + __u16 clust_size; /* Size of clusters in sectors */ + __u16 data_begin; /* The sector of the first cluster */ + __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */ + int fatbufnum; /* Used by get_fatent, init to -1 */ +} fsdata; + +typedef int (file_detectfs_func)(void); +typedef int (file_ls_func)(const char *dir); +typedef long (file_read_func)(const char *filename, void *buffer, + unsigned long maxsize); + +struct filesystem { + file_detectfs_func *detect; + file_ls_func *ls; + file_read_func *read; + const char name[12]; +}; + +/* FAT tables */ +file_detectfs_func file_fat_detectfs; +file_ls_func file_fat_ls; +file_read_func file_fat_read; + +/* Currently this doesn't check if the dir exists or is valid... */ +int file_cd(const char *path); +int file_fat_detectfs(void); +int file_fat_ls(const char *dir); +long file_fat_read(const char *filename, void *buffer, unsigned long maxsize); +const char *file_getfsname(int idx); + +#endif /* _FAT_H_ */ diff --git a/include/flash.h b/include/flash.h index 6410f2f6bf..882652d7e8 100644 --- a/include/flash.h +++ b/include/flash.h @@ -158,6 +158,10 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot); #define AMD_ID_DL324B 0x225F225F /* 29DL324B ID (32 M, bottom boot sect) */ #define AMD_ID_DL640 0x227E227E /* 29DL640D ID (64 M, dual boot sectors)*/ +#define AMD_ID_MIRROR 0x227E227E /* 1st ID word for MirrorBit family */ +#define AMD_ID_LV128U_2 0x22122212 /* 2d ID word for AM29LV128M at 0x38 */ +#define AMD_ID_LV128U_3 0x22002200 /* 3d ID word for AM29LV128M at 0x3c */ + #define AMD_ID_LV640U 0x22D722D7 /* 29LV640U ID (64 M, uniform sectors) */ #define ATM_ID_BV1614 0x000000C0 /* 49BV1614 ID */ @@ -302,6 +306,7 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot); #define FLASH_28F320C3B 0x009F /* Intel 28F320C3B ( 32M = 2M x 16 ) */ #define FLASH_28F640C3T 0x00A0 /* Intel 28F640C3T ( 64M = 4M x 16 ) */ #define FLASH_28F640C3B 0x00A1 /* Intel 28F640C3B ( 64M = 4M x 16 ) */ +#define FLASH_AMLV128U 0x00A2 /* AMD 29LV128M ( 128M = 8M x 16 ) */ #define FLASH_UNKNOWN 0xFFFF /* unknown flash type */ diff --git a/include/mmc.h b/include/mmc.h new file mode 100644 index 0000000000..a2716959e2 --- /dev/null +++ b/include/mmc.h @@ -0,0 +1,33 @@ +/* + * (C) Copyright 2000-2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _MMC_H_ +#define _MMC_H_ +#include + +int mmc_init(int verbose); +int mmc_read(ulong src, uchar *dst, int size); +int mmc_write(uchar *src, ulong dst, int size); +int mmc2info(ulong addr); + +#endif /* _MMC_H_ */ diff --git a/include/net.h b/include/net.h index 689a90f6ee..2a1d3365e4 100644 --- a/include/net.h +++ b/include/net.h @@ -12,12 +12,14 @@ #ifndef __NET_H__ #define __NET_H__ -#if !defined(CONFIG_NET_MULTI) && defined(CONFIG_8xx) +#if defined(CONFIG_8xx) #include -#if defined(FEC_ENET) || defined(SCC_ENET) -#define CONFIG_NET_MULTI -#endif -#endif +# if !defined(CONFIG_NET_MULTI) +# if defined(FEC_ENET) || defined(SCC_ENET) +# define CONFIG_NET_MULTI +# endif +# endif +#endif /* CONFIG_8xx */ #if !defined(CONFIG_NET_MULTI) && defined(CONFIG_8260) #include -- cgit v1.2.1