From 49d8899ba9c26335e4a12e01c18028fc5e40c796 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 30 Aug 2015 19:19:24 -0600 Subject: arm: Remove pxa255_idp, zipitz2 boards These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass --- include/configs/pxa255_idp.h | 335 ------------------------------------------- include/configs/zipitz2.h | 238 ------------------------------ 2 files changed, 573 deletions(-) delete mode 100644 include/configs/pxa255_idp.h delete mode 100644 include/configs/zipitz2.h (limited to 'include') diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h deleted file mode 100644 index 332d79f89f..0000000000 --- a/include/configs/pxa255_idp.h +++ /dev/null @@ -1,335 +0,0 @@ -/* - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * Copied from lubbock.h - * - * (C) Copyright 2004 - * BEC Systems - * Cliff Brake - * Configuation settings for the Accelent/Vibren PXA255 IDP - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include - -/* - * If we are developing, we might want to start U-Boot from RAM - * so we MUST NOT initialize critical regs like mem-timing ... - */ -#undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */ -#define CONFIG_SYS_TEXT_BASE 0x0 - -/* - * define the following to enable debug blinks. A debug blink function - * must be defined in memsetup.S - */ -#undef DEBUG_BLINK_ENABLE -#undef DEBUG_BLINKC_ENABLE - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_CPU_PXA25X 1 /* This is an PXA250 CPU */ - -#undef CONFIG_LCD -#ifdef CONFIG_LCD -#define CONFIG_PXA_LCD -#define CONFIG_SHARP_LM8V31 -#endif - -#define CONFIG_MMC 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_BOARD_LATE_INIT - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * PXA250 IDP memory map information - */ - -#define IDP_CS5_ETH_OFFSET 0x03400000 - - -/* - * Hardware drivers - */ -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300) -#define CONFIG_SMC_USE_32_BIT 1 -/* #define CONFIG_SMC_USE_IOFUNCS */ - -/* the following has to be set high -- suspect something is wrong with - * with the tftp timeout routines. FIXME!!! - */ -#define CONFIG_NET_RETRY_COUNT 100 - -/* - * select serial console configuration - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */ -#define CONFIG_CONS_INDEX 3 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 115200 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_DHCP - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTCOMMAND "bootm 40000" -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -/* #define CONFIG_INITRD_TAG 1 */ - -/* - * Current memory map for Vibren supplied Linux images: - * - * Flash: - * 0 - 0x3ffff (size = 0x40000): bootloader - * 0x40000 - 0x13ffff (size = 0x100000): kernel - * 0x140000 - 0x1f3ffff (size = 0x1e00000): jffs - * - * RAM: - * 0xa0008000 - kernel is loaded - * 0xa3000000 - Uboot runs (48MB into RAM) - * - */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "prog_boot_mmc=" \ - "mw.b 0xa0000000 0xff 0x40000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0000000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x3ffff; " \ - "erase 0x0 0x3ffff; " \ - "cp.b 0xa0000000 0x0 0x40000; " \ - "reset;" \ - "fi\0" \ - "prog_uzImage_mmc=" \ - "mw.b 0xa0000000 0xff 0x100000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0000000 uzImage; " \ - "then " \ - "protect off 0x40000 0xfffff; " \ - "erase 0x40000 0xfffff; " \ - "cp.b 0xa0000000 0x40000 0x100000; " \ - "fi\0" \ - "prog_jffs_mmc=" \ - "mw.b 0xa0000000 0xff 0x1e00000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0000000 root.jffs; " \ - "then " \ - "protect off 0x140000 0x1f3ffff; " \ - "erase 0x140000 0x1f3ffff; " \ - "cp.b 0xa0000000 0x140000 0x1e00000; " \ - "fi\0" \ - "boot_mmc=" \ - "if mmcinit && " \ - "fatload mmc 0 0xa1000000 uzImage && " \ - "then " \ - "bootm 0xa1000000; " \ - "fi\0" \ - "prog_boot_net=" \ - "mw.b 0xa0000000 0xff 0x100000; " \ - "if bootp 0xa0000000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x3ffff; " \ - "erase 0x0 0x3ffff; " \ - "cp.b 0xa0000000 0x0 0x40000; " \ - "reset; " \ - "fi\0" \ - "prog_uzImage_net=" \ - "mw.b 0xa0000000 0xff 0x100000; " \ - "if bootp 0xa0000000 uzImage; " \ - "then " \ - "protect off 0x40000 0xfffff; " \ - "erase 0x40000 0xfffff; " \ - "cp.b 0xa0000000 0x40000 0x100000; " \ - "fi\0" \ - "prog_jffs_net=" \ - "mw.b 0xa0000000 0xff 0x1e00000; " \ - "if bootp 0xa0000000 root.jffs; " \ - "then " \ - "protect off 0x140000 0x1f3ffff; " \ - "erase 0x140000 0x1f3ffff; " \ - "cp.b 0xa0000000 0x140000 0x1e00000; " \ - "fi\0" - - -/* "erase_env=" */ -/* "protect off" */ - - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#undef CONFIG_SYS_PROMPT -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ -#else -#endif -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* default load address */ - -#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ - -#define RTC 1 /* enable 32KHz osc */ - -#ifdef CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ -#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */ -#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 -#define CONFIG_SYS_DRAM_SIZE 0x04000000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 - -/* - * GPIO settings - */ - -#define CONFIG_SYS_GAFR0_L_VAL 0x80001005 -#define CONFIG_SYS_GAFR0_U_VAL 0xa5128012 -#define CONFIG_SYS_GAFR1_L_VAL 0x699a9558 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5aa6a -#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x2 -#define CONFIG_SYS_GPCR0_VAL 0x1800400 -#define CONFIG_SYS_GPCR1_VAL 0x0 -#define CONFIG_SYS_GPCR2_VAL 0x0 -#define CONFIG_SYS_GPDR0_VAL 0xc1818440 -#define CONFIG_SYS_GPDR1_VAL 0xfcffab82 -#define CONFIG_SYS_GPDR2_VAL 0x1ffff -#define CONFIG_SYS_GPSR0_VAL 0x8000 -#define CONFIG_SYS_GPSR1_VAL 0x3f0002 -#define CONFIG_SYS_GPSR2_VAL 0x1c000 - -#define CONFIG_SYS_PSSR_VAL 0x20 - -#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10 -#define CONFIG_SYS_CKEN 0x0 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x29DCA4D2 -#define CONFIG_SYS_MSC1_VAL 0x43AC494C -#define CONFIG_SYS_MSC2_VAL 0x39D449D4 -#define CONFIG_SYS_MDCNFG_VAL 0x090009C9 -#define CONFIG_SYS_MDREFR_VAL 0x0085C017 -#define CONFIG_SYS_MDMRS_VAL 0x00220022 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 -#define CONFIG_SYS_SXCNFG_VAL 0x00000000 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000003 -#define CONFIG_SYS_MCMEM0_VAL 0x00014405 -#define CONFIG_SYS_MCMEM1_VAL 0x00014405 -#define CONFIG_SYS_MCATT0_VAL 0x00014405 -#define CONFIG_SYS_MCATT1_VAL 0x00014405 -#define CONFIG_SYS_MCIO0_VAL 0x00014405 -#define CONFIG_SYS_MCIO1_VAL 0x00014405 - -/* - * FLASH and environment organization - */ -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define CONFIG_SYS_MONITOR_BASE 0 -#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* put cfg at end of flash for now */ -#define CONFIG_ENV_IS_IN_FLASH 1 - /* Addr of Environment Sector */ -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000) -#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16) - -#endif /* __CONFIG_H */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h deleted file mode 100644 index 0199190eb8..0000000000 --- a/include/configs/zipitz2.h +++ /dev/null @@ -1,238 +0,0 @@ -/* - * Aeronix Zipit Z2 configuration file - * - * Copyright (C) 2009-2010 Marek Vasut - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */ -#define CONFIG_SYS_TEXT_BASE 0x0 - -#undef CONFIG_BOARD_LATE_INIT -#undef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_PREBOOT - -/* - * Environment settings - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_SIZE 0x20000 - -/* we will never enable dcache, because we have to setup MMU first */ -#define CONFIG_SYS_DCACHE_OFF - -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\ - "then " \ - "source 0xa0000000; " \ - "else " \ - "bootm 0x60000; " \ - "fi; " -#define CONFIG_BOOTARGS \ - "console=tty0 console=ttyS2,115200 fbcon=rotate:3" -#define CONFIG_TIMESTAMP -#define CONFIG_BOOTDELAY 2 /* Autoboot delay */ -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_SYS_TEXT_BASE 0x0 -#define CONFIG_LZMA /* LZMA compression support */ - -/* - * Serial Console Configuration - * STUART - the lower serial port on Colibri board - */ -#define CONFIG_PXA_SERIAL -#define CONFIG_STUART 1 -#define CONFIG_CONS_INDEX 2 -#define CONFIG_BAUDRATE 115200 - -/* - * Bootloader Components Configuration - */ -#define CONFIG_CMD_ENV -#define CONFIG_CMD_MMC -#define CONFIG_CMD_SPI - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_DOS_PARTITION -#endif - -/* - * SPI and LCD - */ -#ifdef CONFIG_CMD_SPI -#define CONFIG_SOFT_SPI -#define CONFIG_LCD -#define CONFIG_PXA_LCD -#define CONFIG_LMS283GF05 -#define CONFIG_VIDEO_LOGO -#define CONFIG_CMD_BMP -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SPLASH_SCREEN_ALIGN -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) - -#define SPI_DELAY udelay(10) -#define SPI_SDA(val) zipitz2_spi_sda(val) -#define SPI_SCL(val) zipitz2_spi_scl(val) -#define SPI_READ zipitz2_spi_read() -#ifndef __ASSEMBLY__ -void zipitz2_spi_sda(int); -void zipitz2_spi_scl(int); -unsigned char zipitz2_spi_read(void); -#endif -#endif - -/* - * KGDB - */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * HUSH Shell Configuration - */ -#define CONFIG_SYS_HUSH_PARSER 1 - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -/* - * Clock Configuration - */ -#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ - -/* - * SRAM Map - */ -#define PHYS_SRAM 0x5c000000 /* SRAM Bank #1 */ -#define PHYS_SRAM_SIZE 0x00040000 /* 256k */ - -/* - * DRAM Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048) - -/* - * NOR FLASH - */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ -#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 -#define CONFIG_SYS_FLASH_LOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_PROTECTION - -/* - * GPIO settings - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x02000140 -#define CONFIG_SYS_GAFR0_U_VAL 0x59188000 -#define CONFIG_SYS_GAFR1_L_VAL 0x63900002 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950 -#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x29000308 -#define CONFIG_SYS_GAFR3_L_VAL 0x54000000 -#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5 -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000020 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CONFIG_SYS_GPCR3_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0xdafcee00 -#define CONFIG_SYS_GPDR1_VAL 0xffa3aaab -#define CONFIG_SYS_GPDR2_VAL 0x8fe9ffff -#define CONFIG_SYS_GPDR3_VAL 0x001b1f8a -#define CONFIG_SYS_GPSR0_VAL 0x06080400 -#define CONFIG_SYS_GPSR1_VAL 0x007f0000 -#define CONFIG_SYS_GPSR2_VAL 0x032a0000 -#define CONFIG_SYS_GPSR3_VAL 0x00000180 - -#define CONFIG_SYS_PSSR_VAL 0x30 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x00511220 -#define CONFIG_SYS_CCCR 0x00000190 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x2ffc38f8 -#define CONFIG_SYS_MSC1_VAL 0x0000ccd1 -#define CONFIG_SYS_MSC2_VAL 0x0000b884 -#define CONFIG_SYS_MDCNFG_VAL 0x08000ba9 -#define CONFIG_SYS_MDREFR_VAL 0x2011a01e -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x00014307 -#define CONFIG_SYS_MCMEM1_VAL 0x00014307 -#define CONFIG_SYS_MCATT0_VAL 0x0001c787 -#define CONFIG_SYS_MCATT1_VAL 0x0001c787 -#define CONFIG_SYS_MCIO0_VAL 0x0001430f -#define CONFIG_SYS_MCIO1_VAL 0x0001430f - -#endif /* __CONFIG_H */ -- cgit v1.2.1