From 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965 Mon Sep 17 00:00:00 2001
From: Tanya Jiang <tanya.jiang@freescale.com>
Date: Thu, 3 Aug 2006 18:38:13 +0800
Subject: mpc83xx: Unified TQM834x variable names with 83xx and consolidated
 macros

Unified TQM834x variable names with 83xx and consolidated macro
in preparation for the 8360 and other upcoming 83xx devices.

Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
---
 include/configs/TQM834x.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'include/configs')

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 4bbee97db5..b1f033d19f 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -36,6 +36,7 @@
  */
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC83XX		1	/* MPC83XX family */
+#define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_MPC834X		1	/* MPC834X specific */
 #define CONFIG_TQM834X		1	/* TQM834X board specific */
 
@@ -56,6 +57,17 @@
  */
 #define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_8)
 
+#define CFG_SCCR_INIT		(SCCR_DEFAULT & (~SCCR_CLK_MASK))
+#define CFG_SCCR_TSEC1CM	SCCR_TSEC1CM_1	/* TSEC1 clock setting */
+#define CFG_SCCR_TSEC2CM	SCCR_TSEC2CM_1	/* TSEC2 clock setting */
+#define CFG_SCCR_ENCCM		SCCR_ENCCM_3	/* ENC clock setting */
+#define CFG_SCCR_USBCM		SCCR_USBCM_3	/* USB clock setting */
+#define CFG_SCCR_VAL		( CFG_SCCR_INIT		\
+				| CFG_SCCR_TSEC1CM	\
+				| CFG_SCCR_TSEC2CM	\
+				| CFG_SCCR_ENCCM	\
+				| CFG_SCCR_USBCM	)
+
 /* board pre init: do not call, nothing to do */
 #undef CONFIG_BOARD_EARLY_INIT_F
 
-- 
cgit v1.2.1


From afd6e470f639883002c7c59d562690a5cb0f4865 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Wed, 25 Oct 2006 18:45:23 -0500
Subject: mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it

---
 include/configs/TQM834x.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include/configs')

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index b1f033d19f..f0e49007d0 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -95,6 +95,7 @@
 #define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
 #undef CFG_FLASH_CHECKSUM
 #define CFG_FLASH_BASE		0x80000000	/* start of FLASH   */
+#define CFG_FLASH_SIZE		8		/* FLASH size in MB */
 
 /* buffered writes in the AMD chip set is not supported yet */
 #undef CFG_FLASH_USE_BUFFER_WRITE
-- 
cgit v1.2.1


From b24f119d672b709d153ff2ac091d4aa63ec6877d Mon Sep 17 00:00:00 2001
From: Ben Warren <bwarren@qstreams.com>
Date: Thu, 7 Sep 2006 16:51:04 -0400
Subject: Multi-bus I2C implementation of MPC834x

Hello,

Attached is a patch implementing multiple I2C buses on the MPC834x CPU
family and the MPC8349EMDS board in particular.
This patch requires Patch 1 (Add support for multiple I2C buses).
Testing was performed on a 533MHz board.

/*** Note: This patch replaces ticket DNX#2006083042000027 ***/

Signed-off-by: Ben Warren <bwarren@qstreams.com>

CHANGELOG:
        Implemented driver-level code to support two I2C buses on the
MPC834x CPU family and the MPC8349EMDS board.  Available I2C bus speeds
are 50kHz, 100kHz and 400kHz on each bus.

regards,
Ben
---
 include/configs/MPC8349EMDS.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 66f164660e..4d5ad57192 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -35,7 +35,7 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300		1	/* E300 Family */
-#define CONFIG_MPC83XX		1	/* MPC83XX family */
+#define CONFIG_MPC834X		1	/* MPC834X family */
 #define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_MPC8349EMDS	1	/* MPC8349EMDS board specific */
 
@@ -311,9 +311,11 @@
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
 #define CFG_I2C_OFFSET		0x3000
 #define CFG_I2C2_OFFSET		0x3100
 
-- 
cgit v1.2.1


From 2ad6b513b31070bd0c003792ed1c3e7f5d740357 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 31 Oct 2006 18:44:42 -0600
Subject: mpc83xx: Add support for the MPC8349E-mITX

PREREQUISITE PATCHES:

* This patch can only be applied after the following patches have been applied:

  1) DNX#2006090742000024 "Add support for multiple I2C buses"
  2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
  3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
  4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
  5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"

CHANGELOG:

* Add support for the Freescale MPC8349E-mITX reference design platform.
  The second TSEC (Vitesse 7385 switch) is not supported at this time.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 include/configs/MPC8349ITX.h | 753 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 753 insertions(+)
 create mode 100644 include/configs/MPC8349ITX.h

(limited to 'include/configs')

diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
new file mode 100644
index 0000000000..aed350fe09
--- /dev/null
+++ b/include/configs/MPC8349ITX.h
@@ -0,0 +1,753 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ MPC8349E-mITX board configuration file
+
+ Memory map:
+
+ 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB)
+ 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB)
+ 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB)
+ 0xE000_0000-0xEFFF_FFFF IMMR (1 MB)
+ 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB)
+ 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB)
+ 0xF000_0000-0xF000_FFFF Compact Flash
+ 0xF001_0000-0xF001_FFFF Local bus expansion slot
+ 0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385
+ 0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB)
+ 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB)
+
+ I2C address list:
+ 						Align.	Board
+ Bus	Addr    Part No.	Description	Length	Location
+ ----------------------------------------------------------------
+ I2C1	0x50    M24256-BWMN6P	Board EEPROM	2       U64
+
+ I2C2	0x20    PCF8574		I2C Expander	0	U8
+ I2C2	0x21    PCF8574		I2C Expander	0       U10
+ I2C2	0x38    PCF8574A	I2C Expander    0	U8
+ I2C2	0x39    PCF8574A	I2C Expander	0	U10
+ I2C2	0x51    (DDR)		DDR EEPROM	1	U1
+ I2C2	0x68    DS1339		RTC		1	U68
+
+ Note that a given board has *either* a pair of 8574s or a pair of 8574As.
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_MPC834X		/* MPC834x family (8343, 8347, 8349) */
+#define CONFIG_MPC8349		/* MPC8349 specific */
+
+#define CONFIG_PCI
+
+#define CONFIG_COMPACT_FLASH	/* The CF card interface on the back of the board */
+#define CONFIG_RTC_DS1337
+
+/* I2C */
+#define CONFIG_HARD_I2C
+
+#ifdef CONFIG_HARD_I2C
+
+#define CONFIG_MISC_INIT_F
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_I2C_OFFSET      	0x3000
+#define CFG_I2C2_OFFSET      	0x3100
+#define CFG_SPD_BUS_NUM		I2C_2
+
+#define CFG_I2C_8574_ADDR1	0x20	/* I2C2, PCF8574 */
+#define CFG_I2C_8574_ADDR2	0x21	/* I2C2, PCF8574 */
+#define CFG_I2C_8574A_ADDR1	0x38	/* I2C2, PCF8574A */
+#define CFG_I2C_8574A_ADDR2	0x39	/* I2C2, PCF8574A */
+#define CFG_I2C_EEPROM_ADDR	0x50    /* I2C1, Board EEPROM */
+#define CFG_I2C_RTC_ADDR	0x68	/* I2C2, DS1339 RTC*/
+#define SPD_EEPROM_ADDRESS	0x51	/* I2C2, DDR */
+
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+
+/* Don't probe these addresses: */
+#define CFG_I2C_NOPROBES        {{1, CFG_I2C_8574_ADDR1}, \
+				 {1, CFG_I2C_8574_ADDR2}, \
+				 {1, CFG_I2C_8574A_ADDR1}, \
+				 {1, CFG_I2C_8574A_ADDR2}}
+/* Bit definitions for the 8574[A] I2C expander */
+#define I2C_8574_REVISION	0x03	/* Board revision, 00=0.0, 01=0.1, 10=1.0 */
+#define I2C_8574_CF		0x08	/* 1=Compact flash absent, 0=present */
+#define I2C_8574_MPCICLKRN	0x10	/* MiniPCI Clk Run */
+#define I2C_8574_PCI66		0x20	/* 0=33MHz PCI, 1=66MHz PCI */
+#define I2C_8574_FLASHSIDE	0x40	/* 0=Reset vector from U4, 1=from U7*/
+
+#undef CONFIG_SOFT_I2C
+
+#endif
+
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+#define PCI_66M
+#ifdef PCI_66M
+#define CONFIG_83XX_CLKIN	66666666	/* in Hz */
+#else
+#define CONFIG_83XX_CLKIN	33333333	/* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#ifdef PCI_66M
+#define CONFIG_SYS_CLK_FREQ	66666666
+#else
+#define CONFIG_SYS_CLK_FREQ	33333333
+#endif
+#endif
+
+#define CFG_IMMRBAR		0xE0000000	/* The IMMR is relocated to here */
+
+#undef CFG_DRAM_TEST                   		/* memory test, takes time */
+#define CFG_MEMTEST_START       0x00003000      /* memtest region */
+#define CFG_MEMTEST_END         0x07100000      /* only has 128M */
+
+/*
+ * DDR Setup
+ */
+#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
+#undef CONFIG_DDR_ECC_CMD		/* use DDR ECC user commands */
+#define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
+
+/*
+ * 32-bit data path mode.
+ *
+ * Please note that using this mode for devices with the real density of 64-bit
+ * effectively reduces the amount of available memory due to the effect of
+ * wrapping around while translating address to row/columns, for example in the
+ * 256MB module the upper 128MB get aliased with contents of the lower
+ * 128MB); normally this define should be used for devices with real 32-bit
+ * data path.
+ */
+#undef CONFIG_DDR_32BIT
+
+#define CFG_DDR_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#undef  CONFIG_DDR_2T_TIMING
+#define CFG_83XX_DDR_USES_CS0
+
+#ifndef CONFIG_SPD_EEPROM
+/*
+ * Manually set up DDR parameters
+ */
+    #define CFG_DDR_SIZE	256		/* Mb */
+    #define CFG_DDR_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+
+    #define CFG_DDR_TIMING_1	0x26242321
+    #define CFG_DDR_TIMING_2	0x00000800  /* P9-45, may need tuning */
+#endif
+
+/* FLASH on the Local Bus */
+#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
+#define CFG_FLASH_SIZE		16		/* FLASH size in MB */
+
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_16 | BR_V)
+#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000017	/* 16Mb window bytes */
+
+/* VSC7385 on the Local Bus */
+#define CFG_VSC7385_BASE	0xF8000000	/* start of VSC7385   */
+
+#define CFG_BR1_PRELIM		(CFG_VSC7385_BASE | BR_PS_8 | BR_V)
+#define CFG_OR1_PRELIM		(0xFFFE0000 /* 128KB */ | \
+				OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CFG_LBLAWBAR1_PRELIM	CFG_VSC7385_BASE	/* Access window base at VSC7385 base */
+#define CFG_LBLAWAR1_PRELIM	0x80000010		/* Access window size 128K */
+
+#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+#define CFG_MAX_FLASH_SECT	135		/* sectors per device */
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_LED_BASE		0xF9000000  /* start of LED and Board ID */
+#define CFG_BR2_PRELIM		(CFG_LED_BASE | BR_PS_8 | BR_V)
+#define CFG_OR2_PRELIM		(0xFFE00000 /* 2MB */ | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \
+				OR_GPCM_SCY_9 | \
+				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#ifdef CONFIG_COMPACT_FLASH
+
+#define CFG_CF_BASE	    	0xF0000000
+
+#define CFG_BR3_PRELIM      	(CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
+#define CFG_OR3_PRELIM	    	(OR_UPM_AM | OR_UPM_BI)
+
+#define CFG_LBLAWBAR2_PRELIM	CFG_CF_BASE	/* Window base at flash base + LED & Board ID */
+#define CFG_LBLAWAR2_PRELIM 	0x8000000F	/* 64K bytes */
+
+#undef CONFIG_IDE_RESET
+#undef CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS		1
+#define CFG_IDE_MAXDEVICE	1
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CFG_ATA_BASE_ADDR	CFG_CF_BASE
+#define CFG_ATA_DATA_OFFSET	0x0000
+#define CFG_ATA_REG_OFFSET	0
+#define CFG_ATA_ALT_OFFSET	0x0200
+#define CFG_ATA_STRIDE		2
+
+#define ATA_RESET_TIME	1	/* If a CF card is not inserted, time out quickly */
+
+#endif
+
+#define CONFIG_DOS_PARTITION
+
+#define CFG_MID_FLASH_JUMP      0x7F000000
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR	0xFD000000		/* Initial RAM address */
+#define CFG_INIT_RAM_END    	0x1000	     /* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE  	0x100     /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024) /* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ *    LCRR:  DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CFG_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR	0x00000000
+
+#undef CFG_LB_SDRAM	/* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
+ */
+
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+#define CFG_LBLAWBAR2_PRELIM	0xF0000000
+#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64M */
+
+#define CFG_BR2_PRELIM		(CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V)
+#define CFG_OR2_PRELIM		(0xFC000000 /* 64 MB */ | \
+				 OR_SDRAM_XAM | \
+				 ((9 - 7) << OR_SDRAM_COLS_SHIFT) | \
+				 ((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \
+				 OR_SDRAM_EAD)
+
+#define CFG_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR8	(5 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT6	(5 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC3	(3 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON    ( CFG_LBC_LSDMR_RFEN            \
+				| CFG_LBC_LSDMR_BSMA1516	\
+				| CFG_LBC_LSDMR_RFCR8		\
+				| CFG_LBC_LSDMR_PRETOACT6	\
+				| CFG_LBC_LSDMR_ACTTORW3	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC3		\
+				| CFG_LBC_LSDMR_CL3		\
+				)
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+#endif
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMRBAR + 0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMRBAR + 0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_MPC83XX_PCI2
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_MMIO_BASE	(CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
+#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xE2000000
+#define CFG_PCI1_IO_SIZE	0x01000000	/* 16M */
+
+#ifdef CONFIG_MPC83XX_PCI2
+#define CFG_PCI2_MEM_BASE	(CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE)
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI2_MMIO_BASE	(CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE)
+#define CFG_PCI2_MMIO_PHYS	CFG_PCI2_MMIO_BASE
+#define CFG_PCI2_MMIO_SIZE	0x10000000	/* 256M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	(CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE)
+#define CFG_PCI2_IO_SIZE	0x01000000	/* 16M */
+#endif
+
+#define _IO_BASE		0x00000000	/* points to PCI I/O space */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
+#ifdef CONFIG_RTL8139
+/* This macro is used by RTL8139 but not defined in PPC architecture */
+#define KSEG1ADDR(x)	    (x)
+#endif
+
+#ifndef CONFIG_PCI_PNP
+    #define PCI_ENET0_IOADDR	0x00000000
+    #define PCI_ENET0_MEMADDR	CFG_PCI2_MEM_BASE
+    #define PCI_IDSEL_NUMBER	0x0f	/* IDSEL = AD15 */
+#endif
+
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+#endif
+
+/* TSEC */
+
+#ifdef CONFIG_TSEC_ENET
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI
+#endif
+
+#define CONFIG_MII
+#define CONFIG_PHY_GIGE		/* In case CFG_CMD_MII is specified */
+
+#define CONFIG_MPC83XX_TSEC1
+
+#ifdef CONFIG_MPC83XX_TSEC1
+#define CONFIG_MPC83XX_TSEC1_NAME  "TSEC0"
+#define CFG_TSEC1_OFFSET 	0x24000
+#define TSEC1_PHY_ADDR		0x1c    /* VSC8201 uses address 0x1c */
+#define TSEC1_PHYIDX		0
+#endif
+
+#ifdef CONFIG_MPC83XX_TSEC2
+#define CONFIG_MPC83XX_TSEC2_NAME  "TSEC1"
+#define CFG_TSEC2_OFFSET 	0x25000
+#define CONFIG_UNKNOWN_TSEC	/* TSEC2 is proprietary */
+#define TSEC2_PHY_ADDR		4
+#define TSEC2_PHYIDX		0
+#endif
+
+#define CONFIG_ETHPRIME		"Freescale TSEC"
+
+#endif
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+  #define CFG_ENV_IS_IN_FLASH
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+  #define CFG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
+  #define CFG_ENV_SIZE		0x2000
+#else
+  #define CFG_NO_FLASH		/* Flash is not usable now */
+  #define CFG_ENV_IS_NOWHERE	/* Store ENV in memory only */
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+  #define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	/* allow baudrate change */
+
+/* CONFIG_COMMANDS */
+
+#ifdef CONFIG_COMPACT_FLASH
+#define CONFIG_COMMANDS_CF	(CFG_CMD_IDE | CFG_CMD_FAT)
+#else
+#define CONFIG_COMMANDS_CF	0
+#endif
+
+#ifdef CONFIG_PCI
+#define CONFIG_COMMANDS_PCI	CFG_CMD_PCI
+#else
+#define CONFIG_COMMANDS_PCI	0
+#endif
+
+#ifdef CONFIG_HARD_I2C
+#define CONFIG_COMMANDS_I2C	CFG_CMD_I2C
+#else
+#define CONFIG_COMMANDS_I2C	0
+#endif
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
+				CONFIG_COMMANDS_CF	| \
+				CFG_CMD_NET 	| \
+				CFG_CMD_PING 	| \
+				CONFIG_COMMANDS_I2C 	| \
+				CONFIG_COMMANDS_PCI 	| \
+				CFG_CMD_SDRAM 	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_CACHE	| \
+				CFG_CMD_IRQ)
+#include <cmd_confdefs.h>
+
+/* Watchdog */
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+#ifdef CONFIG_WATCHDOG
+#define CFG_WATCHDOG_VALUE      0xFFFFFFC3
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"MPC8349E-mITX> "		/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE 	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log2 of the above value */
+#endif
+
+#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_4X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef PCI_64BIT
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_64_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_32_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0XFFF00100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#endif
+
+/* System performance */
+#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
+#define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
+#define CFG_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
+#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C1 clock mode (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count */
+
+/* System IO Config */
+#define CFG_SICRH SICRH_TSOBI1	/* Needed for gigabit to work on TSEC 1 */
+#define CFG_SICRL SICRL_LDP_A
+
+#define CFG_HID0_INIT 0x000000000
+
+#define CFG_HID0_FINAL CFG_HID0_INIT
+
+#define CFG_HID2 	HID2_HBE
+
+/* DDR @ 0x00000000 */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI @ 0x80000000 */
+#ifdef CONFIG_PCI
+#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT1L	0
+#define CFG_IBAT1U	0
+#define CFG_IBAT2L	0
+#define CFG_IBAT2U	0
+#endif
+
+#ifdef CONFIG_MPC83XX_PCI2
+#define CFG_IBAT3L	(CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U	(CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L	(CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT4U	(CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT3L	0
+#define CFG_IBAT3U	0
+#define CFG_IBAT4L	0
+#define CFG_IBAT4U	0
+#endif
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+#define CFG_IBAT5L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U	(CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
+#define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT7L	0
+#define CFG_IBAT7U	0
+
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#ifdef CONFIG_MPC83XX_TSEC1
+#define CONFIG_ETHADDR		00:E0:0C:00:8C:01
+#endif
+
+#ifdef CONFIG_MPC83XX_TSEC2
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		00:E0:0C:00:8C:02
+#endif
+
+#define CONFIG_IPADDR		10.82.19.159
+#define CONFIG_SERVERIP		10.82.48.106
+#define CONFIG_GATEWAYIP	10.82.19.254
+#define CONFIG_NETMASK		255.255.252.0
+
+
+#define CONFIG_HOSTNAME		mpc8349emitx
+#define CONFIG_ROOTPATH		/nfsroot0/u/timur/itx-ltib/rootfs
+#define CONFIG_BOOTFILE		timur/uImage
+
+#define CONFIG_UBOOTPATH	timur/u-boot.bin
+#define CONFIG_UBOOTSTART	fe700000
+#define CONFIG_UBOOTEND		fe77ffff
+
+#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+
+#define CONFIG_BAUDRATE	 	115200
+
+#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTDELAY	6
+#else
+#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#endif
+
+#define CONFIG_BOOTARGS \
+	"root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=ttyS0,$baudrate $othbootargs"
+
+#define XMK_STR(x)	#x
+#define MK_STR(x)	XMK_STR(x)
+
+#define	CONFIG_EXTRA_ENV_SETTINGS \
+	"netdev=eth0\0" \
+	"tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
+		"erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
+		"cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \
+		"cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \
+	"tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
+		"protect off FEF00000 FEF7FFFF; " \
+		"erase FEF00000 FEF7FFFF; " \
+		"cp.b $loadaddr FEF00000 $filesize; " \
+		"protect on FEF00000 FEF7FFFF; " \
+		"cmp.b $loadaddr FEF00000 $filesize\0" \
+	"tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \
+	"copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
+		"cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0"
+
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif
-- 
cgit v1.2.1


From 988833324a7fda482c8ac3ca23eb539f8232e404 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 31 Oct 2006 19:14:41 -0600
Subject: mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX

PREREQUISITE PATCHES:

* This patch can only be applied after the following patches have been applied:

  1) DNX#2006092142000015 "Add support for the MPC8349E-mITX  1/2"
  2) DNX#2006092142000024 "Add support for the MPC8349E-mITX  2/2"

CHANGELOG:

* For the 8349E-mITX, fix some size values in pci_init_board(), enable
  the clock for the 2nd USB board (Linux kernel will hang otherwise),
  and fix the CONFIG_BOOTARGS macro.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 include/configs/MPC8349ITX.h | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index aed350fe09..20f3c6d399 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -604,7 +604,7 @@
 
 /* System IO Config */
 #define CFG_SICRH SICRH_TSOBI1	/* Needed for gigabit to work on TSEC 1 */
-#define CFG_SICRL SICRL_LDP_A
+#define CFG_SICRL (SICRL_LDP_A | SICRL_USB1)
 
 #define CFG_HID0_INIT 0x000000000
 
@@ -701,7 +701,7 @@
 #define CONFIG_SERVERIP		10.82.48.106
 #define CONFIG_GATEWAYIP	10.82.19.254
 #define CONFIG_NETMASK		255.255.252.0
-
+#define CONFIG_NETDEV		eth0
 
 #define CONFIG_HOSTNAME		mpc8349emitx
 #define CONFIG_ROOTPATH		/nfsroot0/u/timur/itx-ltib/rootfs
@@ -722,16 +722,19 @@
 #define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
 #endif
 
-#define CONFIG_BOOTARGS \
-	"root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
-	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-	"console=ttyS0,$baudrate $othbootargs"
-
 #define XMK_STR(x)	#x
 #define MK_STR(x)	XMK_STR(x)
 
+#define CONFIG_BOOTARGS \
+	"root=/dev/nfs rw" \
+	" nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \
+	" ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \
+		MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \
+		MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \
+	" console=ttyS0," MK_STR(CONFIG_BAUDRATE)
+
 #define	CONFIG_EXTRA_ENV_SETTINGS \
-	"netdev=eth0\0" \
+	"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
 	"tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
 		"erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
 		"cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \
-- 
cgit v1.2.1


From 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 Mon Sep 17 00:00:00 2001
From: Dave Liu <daveliu@freescale.com>
Date: Fri, 3 Nov 2006 19:33:44 -0600
Subject: mpc83xx: Add MPC8360EMDS basic board support

Add support for the Freescale MPC8360EMDS board.
Includes DDR, DUART, Local Bus, PCI.
---
 include/configs/MPC8360EMDS.h | 585 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 585 insertions(+)
 create mode 100644 include/configs/MPC8360EMDS.h

(limited to 'include/configs')

diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
new file mode 100644
index 0000000000..0ae60618ec
--- /dev/null
+++ b/include/configs/MPC8360EMDS.h
@@ -0,0 +1,585 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1 /* E300 family */
+#define CONFIG_QE		1 /* Has QE */
+#define CONFIG_MPC83XX		1 /* MPC83XX family */
+#define CONFIG_MPC8360		1 /* MPC8360 CPU specific */
+#define CONFIG_MPC8360EMDS	1 /* MPC8360EMDS board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK	66000000 /* in HZ */
+#else
+#define CONFIG_83XX_CLKIN	66000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	66000000
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_4X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CE_PLL_VCO_DIV_4 |\
+	HRCWL_CE_PLL_DIV_1X1 |\
+	HRCWL_CE_TO_PLL_1X6 |\
+	HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_AGENT |\
+	HRCWH_PCI1_ARBITER_DISABLE |\
+	HRCWH_PCICKDRV_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0XFFF00100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT)
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCICKDRV_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT)
+#endif
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH		0x00000000
+#define CFG_SICRL		0x40000000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMRBAR		0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE		0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+
+#undef	CONFIG_DDR_ECC		/* only for ECC DDR module */
+#define CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
+
+#define CONFIG_SPD_EEPROM	/* Use SPD EEPROM for DDR setup */
+#if defined(CONFIG_SPD_EEPROM)
+/*
+ * Determine DDR configuration from I2C interface.
+ */
+#define SPD_EEPROM_ADDRESS	0x52 /* DDR SODIMM */
+#else
+/*
+ * Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE		256 /* MB */
+#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+#define CFG_DDR_TIMING_1	0x37344321 /* tCL-tRCD-tRP-tRAS=2.5-3-3-7 */
+#define CFG_DDR_TIMING_2	0x00000800 /* may need tuning */
+#define CFG_DDR_CONTROL 	0x42008000 /* Self refresh,2T timing */
+#define CFG_DDR_MODE		0x20000162 /* DLL,normal,seq,4/2.5 */
+#define CFG_DDR_INTERVAL	0x045b0100 /* page mode */
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST		/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00000000 /* memtest region */
+#define CFG_MEMTEST_END		0x00100000
+
+/*
+ * The reserved memory
+ */
+
+#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR		0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE		16 /* FLASH size is 16M */
+
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | /* Flash Base address */ \
+			(2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+			BR_V)	/* valid */
+#define CFG_OR0_PRELIM		0xfe006ff7 /* 16MB Flash size */
+
+#define CFG_MAX_FLASH_BANKS	1 /* number of banks */
+#define CFG_MAX_FLASH_SECT	128 /* sectors per device */
+
+#undef	CFG_FLASH_CHECKSUM
+
+/*
+ * BCSR on the Local Bus
+ */
+#define CFG_BCSR		0xF8000000
+#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM	0x8000000E /* Access window size 32K */
+
+#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM		0xFFFFE9f7 /* length 32K */
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+#define CFG_LB_SDRAM		/* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
+#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64MB */
+
+/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM	0xf0001861 /*Port size=32bit, MSEL=SDRAM */
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *		   XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM	0xfc006901
+
+#define CFG_LBC_LSRT	0x32000000 /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000 /* LB refresh timer prescal, 266MHz/32 */
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON	0x0063b723
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+/*
+ * Windows to access PIB via local bus
+ */
+#define CFG_LBLAWBAR3_PRELIM	0xf8008000 /* windows base 0xf8008000 */
+#define CFG_LBLAWAR3_PRELIM	0x8000000f /* windows size 64KB */
+
+/*
+ * CS4 on Local Bus, to PIB
+ */
+#define CFG_BR4_PRELIM	0xf8008801 /* CS4 base address at 0xf8008000 */
+#define CFG_OR4_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * CS5 on Local Bus, to PIB
+ */
+#define CFG_BR5_PRELIM	0xf8010801 /* CS5 base address at 0xf8010000 */
+#define CFG_OR5_PRELIM	0xffffe9f7 /* size 32KB, port size 8bit, GPCM */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CFG_I2C_SPEED	0x3F	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE	0x7F
+#define CFG_I2C_NOPROBES	{0x52} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET	0x3000
+#define CFG_I2C2_OFFSET	0x3100
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE	0x80000000
+#define CFG_PCI_MEM_PHYS	CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE	0x90000000
+#define CFG_PCI_MMIO_PHYS	CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE	0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE		0xE0300000
+#define CFG_PCI_IO_PHYS		0xE0300000
+#define CFG_PCI_IO_SIZE		0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS	0x00000000
+#define CFG_PCI_SLV_MEM_SIZE	0x80000000
+
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
+
+#endif	/* CONFIG_PCI */
+
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+/*
+ * Environment
+ */
+
+#ifndef CFG_RAMBOOT
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
+#else
+	#define CFG_NO_FLASH		1	/* Flash is not usable now */
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+                               	| CFG_CMD_PCI \
+                              	| CFG_CMD_I2C) \
+				& \
+				~(CFG_CMD_ENV \
+				| CFG_CMD_LOADS))
+#else
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C) \
+				& \
+				~(CFG_CMD_ENV \
+				| CFG_CMD_LOADS))
+#endif
+#else
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PCI \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C)
+#else
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_ASKENV \
+				| CFG_CMD_I2C  )
+#endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_LOAD_ADDR		0x2000000 /* default load address */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
+#else
+	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT		0x000000000
+#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2		HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CFG_IBAT1L	(CFG_IMMRBAR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U	(CFG_IMMRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+
+/* BCSR: cache-inhibit and guarded */
+#define CFG_IBAT2L	(CFG_BCSR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT3L	(CFG_FLASH_BASE | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U	CFG_IBAT3U
+
+/* Local bus SDRAM: cacheable */
+#define CFG_IBAT4L	(CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U	(CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L	(CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L	(CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U	(CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#else
+#define CFG_IBAT6L	(0)
+#define CFG_IBAT6U	(0)
+#define CFG_IBAT7L	(0)
+#define CFG_IBAT7U	(0)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_UEC_ETH)
+#define CONFIG_ETHADDR	00:04:9f:ef:01:01
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR	00:04:9f:ef:01:02
+#endif
+
+#define CONFIG_BAUDRATE	115200
+
+#define CONFIG_LOADADDR	200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 	/* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define	CONFIG_EXTRA_ENV_SETTINGS		                        \
+   "netdev=eth0\0"                                                      \
+   "consoledev=ttyS0\0"                                                 \
+   "ramdiskaddr=400000\0"			                        \
+   "ramdiskfile=ramfs.83xx\0"						\
+
+#define CONFIG_NFSBOOTCOMMAND	                                        \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+   "nfsroot=$serverip:$rootpath "                                       \
+   "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "    \
+   "console=$consoledev,$baudrate $othbootargs;"                        \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "                                  \
+   "console=$consoledev,$baudrate $othbootargs;"                        \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
-- 
cgit v1.2.1


From 7737d5c658c606f999dfbe3e86b0fed49e5c50ef Mon Sep 17 00:00:00 2001
From: Dave Liu <daveliu@freescale.com>
Date: Fri, 3 Nov 2006 12:11:15 -0600
Subject: mpc83xx: add QE ethernet support

this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
---
 include/configs/MPC8360EMDS.h | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

(limited to 'include/configs')

diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 0ae60618ec..330c3073d2 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -363,6 +363,35 @@
 #define CONFIG_NET_MULTI	1
 #endif
 
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#define CONFIG_ETHPRIME		"Freescale GETH"
+#define CONFIG_PHY_MODE_NEED_CHANGE
+
+#define CONFIG_UEC_ETH1		/* GETH1 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM	0	/* UCC1 */
+#define CFG_UEC1_RX_CLK		QE_CLK_NONE
+#define CFG_UEC1_TX_CLK		QE_CLK9
+#define CFG_UEC1_ETH_TYPE	GIGA_ETH
+#define CFG_UEC1_PHY_ADDR	0
+#define CFG_UEC1_INTERFACE_MODE	ENET_1000_GMII
+#endif
+
+#define CONFIG_UEC_ETH2		/* GETH2 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM	1	/* UCC2 */
+#define CFG_UEC2_RX_CLK		QE_CLK_NONE
+#define CFG_UEC2_TX_CLK		QE_CLK4
+#define CFG_UEC2_ETH_TYPE	GIGA_ETH
+#define CFG_UEC2_PHY_ADDR	1
+#define CFG_UEC2_INTERFACE_MODE	ENET_1000_GMII
+#endif
+
 /*
  * Environment
  */
-- 
cgit v1.2.1


From 9ca880a250870a7d55754291b5591d2b5fe89b54 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 31 Oct 2006 21:23:16 -0600
Subject: mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS,
 TQM834x, and MPC8360EMDS

This patch also adds an improved I2C set_speed(), which handles all clock
frequencies.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 include/configs/MPC8349ITX.h | 2 +-
 include/configs/TQM834x.h    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 20f3c6d399..2fbc736182 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -81,7 +81,7 @@
 #define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_OFFSET      	0x3000
 #define CFG_I2C2_OFFSET      	0x3100
-#define CFG_SPD_BUS_NUM		I2C_2
+#define CFG_SPD_BUS_NUM		2
 
 #define CFG_I2C_8574_ADDR1	0x20	/* I2C2, PCF8574 */
 #define CFG_I2C_8574_ADDR2	0x21	/* I2C2, PCF8574 */
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index f0e49007d0..727094b203 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -36,8 +36,8 @@
  */
 #define CONFIG_E300		1	/* E300 Family */
 #define CONFIG_MPC83XX		1	/* MPC83XX family */
-#define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_MPC834X		1	/* MPC834X specific */
+#define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_TQM834X		1	/* TQM834X board specific */
 
 /* IMMR Base Addres Register, use Freescale default: 0xff400000 */
-- 
cgit v1.2.1


From bf0b542d6773a5a1cbce77691f009b06d9aeb57d Mon Sep 17 00:00:00 2001
From: Kim Phillips <kim.phillips@freescale.com>
Date: Wed, 1 Nov 2006 00:10:40 -0600
Subject: mpc83xx: add OF_FLAT_TREE bits to 83xx boards

add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
STDOUT_PATH configuration bits to mpc8349emds,
mpc8349itx, and mpc8360emds board code.

redo environment to use bootm with the fdtaddr
for booting ARCH=powerpc kernels by default,
and provide default fdtaddr values.
---
 include/configs/MPC8349EMDS.h | 51 ++++++++++++++++++++++++++++++++++++++-----
 include/configs/MPC8349ITX.h  | 45 ++++++++++++++++++++++++++++++++------
 include/configs/MPC8360EMDS.h | 36 +++++++++++++++++++++++-------
 3 files changed, 112 insertions(+), 20 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 4d5ad57192..e68c41accf 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -35,6 +35,7 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300		1	/* E300 Family */
+#define CONFIG_MPC83XX		1	/* MPC83XX family */
 #define CONFIG_MPC834X		1	/* MPC834X family */
 #define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_MPC8349EMDS	1	/* MPC8349EMDS board specific */
@@ -59,6 +60,17 @@
 #endif
 #endif
 
+#define CFG_SCCR_INIT		(SCCR_DEFAULT & (~SCCR_CLK_MASK))
+#define CFG_SCCR_TSEC1CM	SCCR_TSEC1CM_1	/* TSEC1 clock setting */
+#define CFG_SCCR_TSEC2CM	SCCR_TSEC2CM_1	/* TSEC2 clock setting */
+#define CFG_SCCR_ENCCM		SCCR_ENCCM_3	/* ENC clock setting */
+#define CFG_SCCR_USBCM		SCCR_USBCM_3	/* USB clock setting */
+#define CFG_SCCR_VAL		( CFG_SCCR_INIT		\
+				| CFG_SCCR_TSEC1CM	\
+				| CFG_SCCR_TSEC2CM	\
+				| CFG_SCCR_ENCCM	\
+				| CFG_SCCR_USBCM	)
+
 #define CONFIG_BOARD_EARLY_INIT_F		/* call board_pre_init */
 
 #define CFG_IMMRBAR		0xE0000000
@@ -308,6 +320,18 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8349@0"
+#define OF_SOC			"soc8349@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
+
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
@@ -668,11 +692,11 @@
 #define CONFIG_ETH1ADDR		00:E0:0C:00:7E:21
 #endif
 
-#define CONFIG_IPADDR		192.168.205.5
+#define CONFIG_IPADDR		192.168.1.253
 
 #define CONFIG_HOSTNAME		mpc8349emds
-#define CONFIG_ROOTPATH		/opt/eldk/ppc_6xx
-#define CONFIG_BOOTFILE		/tftpboot/tqm83xx/uImage
+#define CONFIG_ROOTPATH		/nfsroot/rootfs
+#define CONFIG_BOOTFILE		uImage
 
 #define CONFIG_SERVERIP		192.168.1.1
 #define CONFIG_GATEWAYIP	192.168.1.1
@@ -705,14 +729,31 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"	\
 		"bootm\0"						\
-	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"bootfile=/tftpboot/mpc8349emds/uImage\0"			\
 	"load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0"		\
 	"update=protect off fe000000 fe03ffff; "			\
 		"era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"	\
 	"upd=run load;run update\0"					\
+	"fdtaddr=400000\0"						\
+	"fdtfile=mpc8349emds.dtb\0"					\
 	""
 
+#define CONFIG_NFSBOOTCOMMAND	                                        \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+      "nfsroot=$serverip:$rootpath "                                    \
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+   "setenv bootargs root=/dev/ram rw "                                  \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 2fbc736182..aaf4d101dc 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -383,6 +383,17 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8349@0"
+#define OF_SOC			"soc8349@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc8349@e0000000/serial@4500"
 
 #ifdef CONFIG_PCI
 
@@ -697,17 +708,17 @@
 #define CONFIG_ETH1ADDR		00:E0:0C:00:8C:02
 #endif
 
-#define CONFIG_IPADDR		10.82.19.159
-#define CONFIG_SERVERIP		10.82.48.106
-#define CONFIG_GATEWAYIP	10.82.19.254
+#define CONFIG_IPADDR		192.168.1.253
+#define CONFIG_SERVERIP		192.168.1.1
+#define CONFIG_GATEWAYIP	192.168.1.1
 #define CONFIG_NETMASK		255.255.252.0
 #define CONFIG_NETDEV		eth0
 
 #define CONFIG_HOSTNAME		mpc8349emitx
-#define CONFIG_ROOTPATH		/nfsroot0/u/timur/itx-ltib/rootfs
-#define CONFIG_BOOTFILE		timur/uImage
+#define CONFIG_ROOTPATH		/nfsroot/rootfs
+#define CONFIG_BOOTFILE		uImage
 
-#define CONFIG_UBOOTPATH	timur/u-boot.bin
+#define CONFIG_UBOOTPATH	u-boot.bin
 #define CONFIG_UBOOTSTART	fe700000
 #define CONFIG_UBOOTEND		fe77ffff
 
@@ -747,7 +758,27 @@
 		"cmp.b $loadaddr FEF00000 $filesize\0" \
 	"tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \
 	"copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
-		"cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0"
+		"cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0"	\
+        "fdtaddr=400000\0"                                              \
+        "fdtfile=mpc8349emitx.dtb\0"                                    \
+        ""
+
+#define CONFIG_NFSBOOTCOMMAND                                           \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+      "nfsroot=$serverip:$rootpath "                                    \
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"                                            \
+   "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND                                           \
+   "setenv bootargs root=/dev/ram rw "                                  \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "tftp $fdtaddr $fdtfile;"                                            \
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
 
 #undef MK_STR
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 330c3073d2..feb9cf22f2 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -101,6 +101,8 @@
 #define CFG_SDRAM_BASE		CFG_DDR_BASE
 #define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
 
+#define CFG_83XX_DDR_USES_CS0
+
 #undef	CONFIG_DDR_ECC		/* only for ECC DDR module */
 #define CONFIG_DDR_ECC_CMD	/* Use DDR ECC user commands */
 
@@ -313,6 +315,18 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,8360@0"
+#define OF_SOC			"soc8360@e0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc8360@e0000000/serial@4500"
+
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
@@ -591,23 +605,29 @@
 #define	CONFIG_EXTRA_ENV_SETTINGS		                        \
    "netdev=eth0\0"                                                      \
    "consoledev=ttyS0\0"                                                 \
-   "ramdiskaddr=400000\0"			                        \
+   "ramdiskaddr=1000000\0"			                        \
    "ramdiskfile=ramfs.83xx\0"						\
+   "fdtaddr=400000\0"							\
+   "fdtfile=mpc8349emds.dtb\0"						\
+   ""
 
 #define CONFIG_NFSBOOTCOMMAND	                                        \
    "setenv bootargs root=/dev/nfs rw "                                  \
-   "nfsroot=$serverip:$rootpath "                                       \
-   "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "    \
-   "console=$consoledev,$baudrate $othbootargs;"                        \
+      "nfsroot=$serverip:$rootpath "                                    \
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr"
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr - $fdtaddr"
 
-#define CONFIG_RAMBOOTCOMMAND \
+#define CONFIG_RAMBOOTCOMMAND						\
    "setenv bootargs root=/dev/ram rw "                                  \
-   "console=$consoledev,$baudrate $othbootargs;"                        \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
    "tftp $ramdiskaddr $ramdiskfile;"                                    \
    "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr $ramdiskaddr"
+   "tftp $fdtaddr $fdtfile;"						\
+   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
 
 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 
-- 
cgit v1.2.1


From d239d74b1c937984bc519083a8e7de373a390f06 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Fri, 3 Nov 2006 12:00:28 -0600
Subject: mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR

Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
tree matches the other 8xxx trees.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 include/configs/MPC8349EMDS.h | 14 +++++++-------
 include/configs/MPC8349ITX.h  | 10 +++++-----
 include/configs/MPC8360EMDS.h | 10 +++++-----
 include/configs/TQM834x.h     | 14 +++++++-------
 4 files changed, 24 insertions(+), 24 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index e68c41accf..4a5b4bc4a7 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -73,7 +73,7 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F		/* call board_pre_init */
 
-#define CFG_IMMRBAR		0xE0000000
+#define CFG_IMMR		0xE0000000
 
 #undef CFG_DRAM_TEST				/* memory test, takes time */
 #define CFG_MEMTEST_START	0x00000000      /* memtest region */
@@ -311,8 +311,8 @@
 #define CFG_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1        (CFG_IMMRBAR+0x4500)
-#define CFG_NS16550_COM2        (CFG_IMMRBAR+0x4600)
+#define CFG_NS16550_COM1        (CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2        (CFG_IMMR+0x4600)
 
 /* Use the HUSH parser */
 #define CFG_HUSH_PARSER
@@ -345,9 +345,9 @@
 
 /* TSEC */
 #define CFG_TSEC1_OFFSET 0x24000
-#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
 #define CFG_TSEC2_OFFSET 0x25000
-#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET)
+#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
 
 /* USB */
 #define CFG_USE_MPC834XSYS_USB_PHY	1 /* Use SYS board PHY */
@@ -641,8 +641,8 @@
 #endif
 
 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
-#define CFG_IBAT5L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U	(CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 #define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index aaf4d101dc..c74e63a4d4 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -128,7 +128,7 @@
 #endif
 #endif
 
-#define CFG_IMMRBAR		0xE0000000	/* The IMMR is relocated to here */
+#define CFG_IMMR		0xE0000000	/* The IMMR is relocated to here */
 
 #undef CFG_DRAM_TEST                   		/* memory test, takes time */
 #define CFG_MEMTEST_START       0x00003000      /* memtest region */
@@ -374,8 +374,8 @@
 #define CFG_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMRBAR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMRBAR + 0x4600)
+#define CFG_NS16550_COM1	(CFG_IMMR + 0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR + 0x4600)
 
 /* Use the HUSH parser */
 #define CFG_HUSH_PARSER
@@ -653,8 +653,8 @@
 #endif
 
 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
-#define CFG_IBAT5L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT5U	(CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT5L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U	(CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
 #define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index feb9cf22f2..a8f2df911e 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -92,7 +92,7 @@
 /*
  * IMMR new address
  */
-#define CFG_IMMRBAR		0xE0000000
+#define CFG_IMMR		0xE0000000
 
 /*
  * DDR Setup
@@ -306,8 +306,8 @@
 #define CFG_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMRBAR+0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMRBAR+0x4600)
+#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
 
 /* Use the HUSH parser */
 #define CFG_HUSH_PARSER
@@ -515,9 +515,9 @@
 #define CFG_DBAT0U	CFG_IBAT0U
 
 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
-#define CFG_IBAT1L	(CFG_IMMRBAR | BATL_PP_10 | \
+#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
 			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT1U	(CFG_IMMRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
 #define CFG_DBAT1L	CFG_IBAT1L
 #define CFG_DBAT1U	CFG_IBAT1U
 
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index 727094b203..b0b0673cff 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -41,7 +41,7 @@
 #define CONFIG_TQM834X		1	/* TQM834X board specific */
 
 /* IMMR Base Addres Register, use Freescale default: 0xff400000 */
-#define CFG_IMMRBAR		0xff400000
+#define CFG_IMMR		0xff400000
 
 /* System clock. Primary input clock when in PCI host mode */
 #define CONFIG_83XX_CLKIN	66666000	/* 66,666 MHz */
@@ -210,8 +210,8 @@ extern int tqm834x_num_flash_banks;
 #define CFG_BAUDRATE_TABLE  \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1	(CFG_IMMRBAR + 0x4500)
-#define CFG_NS16550_COM2	(CFG_IMMRBAR + 0x4600)
+#define CFG_NS16550_COM1	(CFG_IMMR + 0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR + 0x4600)
 
 /*
  * I2C
@@ -248,9 +248,9 @@ extern int tqm834x_num_flash_banks;
 #define CONFIG_MII
 
 #define CFG_TSEC1_OFFSET	0x24000
-#define CFG_TSEC1		(CFG_IMMRBAR + CFG_TSEC1_OFFSET)
+#define CFG_TSEC1		(CFG_IMMR + CFG_TSEC1_OFFSET)
 #define CFG_TSEC2_OFFSET	0x25000
-#define CFG_TSEC2		(CFG_IMMRBAR + CFG_TSEC2_OFFSET)
+#define CFG_TSEC2		(CFG_IMMR + CFG_TSEC2_OFFSET)
 
 #if defined(CONFIG_TSEC_ENET)
 
@@ -473,8 +473,8 @@ extern int tqm834x_num_flash_banks;
 #endif
 
 /* IMMRBAR */
-#define CFG_IBAT6L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_IBAT6U	(CFG_IMMRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CFG_IBAT6L	(CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT6U	(CFG_IMMR | BATU_BL_1M | BATU_VS | BATU_VP)
 
 /* FLASH */
 #define CFG_IBAT7L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-- 
cgit v1.2.1


From be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Fri, 3 Nov 2006 19:15:00 -0600
Subject: mpc83xx: Update 83xx to use fsl_i2c.c

Update the 83xx tree to use I2C support in drivers/fsl_i2c.c.  Delete
cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
Added multiple I2C bus support to fsl_i2c.c.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 include/configs/MPC8349EMDS.h |  1 +
 include/configs/MPC8349ITX.h  | 49 +++++++++++++++++++++++++++++--------------
 include/configs/MPC8360EMDS.h |  3 ++-
 include/configs/TQM834x.h     |  1 +
 4 files changed, 37 insertions(+), 17 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 4a5b4bc4a7..5bed2d0a29 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -335,6 +335,7 @@
 /* I2C */
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index c74e63a4d4..8dc96352a1 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -41,14 +41,14 @@
  						Align.	Board
  Bus	Addr    Part No.	Description	Length	Location
  ----------------------------------------------------------------
- I2C1	0x50    M24256-BWMN6P	Board EEPROM	2       U64
+ I2C0	0x50    M24256-BWMN6P	Board EEPROM	2       U64
 
- I2C2	0x20    PCF8574		I2C Expander	0	U8
- I2C2	0x21    PCF8574		I2C Expander	0       U10
- I2C2	0x38    PCF8574A	I2C Expander    0	U8
- I2C2	0x39    PCF8574A	I2C Expander	0	U10
- I2C2	0x51    (DDR)		DDR EEPROM	1	U1
- I2C2	0x68    DS1339		RTC		1	U68
+ I2C1	0x20    PCF8574		I2C Expander	0	U8
+ I2C1	0x21    PCF8574		I2C Expander	0       U10
+ I2C1	0x38    PCF8574A	I2C Expander    0	U8
+ I2C1	0x39    PCF8574A	I2C Expander	0	U10
+ I2C1	0x51    (DDR)		DDR EEPROM	1	U1
+ I2C1	0x68    DS1339		RTC		1	U68
 
  Note that a given board has *either* a pair of 8574s or a pair of 8574As.
 */
@@ -77,19 +77,20 @@
 #define CONFIG_MISC_INIT_F
 #define CONFIG_MISC_INIT_R
 
+#define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_OFFSET      	0x3000
 #define CFG_I2C2_OFFSET      	0x3100
-#define CFG_SPD_BUS_NUM		2
+#define CFG_SPD_BUS_NUM		1	/* The I2C bus for SPD */
 
-#define CFG_I2C_8574_ADDR1	0x20	/* I2C2, PCF8574 */
-#define CFG_I2C_8574_ADDR2	0x21	/* I2C2, PCF8574 */
-#define CFG_I2C_8574A_ADDR1	0x38	/* I2C2, PCF8574A */
-#define CFG_I2C_8574A_ADDR2	0x39	/* I2C2, PCF8574A */
-#define CFG_I2C_EEPROM_ADDR	0x50    /* I2C1, Board EEPROM */
-#define CFG_I2C_RTC_ADDR	0x68	/* I2C2, DS1339 RTC*/
-#define SPD_EEPROM_ADDRESS	0x51	/* I2C2, DDR */
+#define CFG_I2C_8574_ADDR1	0x20	/* I2C1, PCF8574 */
+#define CFG_I2C_8574_ADDR2	0x21	/* I2C1, PCF8574 */
+#define CFG_I2C_8574A_ADDR1	0x38	/* I2C1, PCF8574A */
+#define CFG_I2C_8574A_ADDR2	0x39	/* I2C1, PCF8574A */
+#define CFG_I2C_EEPROM_ADDR	0x50    /* I2C0, Board EEPROM */
+#define CFG_I2C_RTC_ADDR	0x68	/* I2C1, DS1339 RTC*/
+#define SPD_EEPROM_ADDRESS	0x51	/* I2C1, DDR */
 
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE		0x7F
@@ -175,6 +176,7 @@
 #define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
 #define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
 #define CFG_FLASH_SIZE		16		/* FLASH size in MB */
+#define CFG_FLASH_EMPTY_INFO
 
 #define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_16 | BR_V)
 #define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
@@ -610,7 +612,7 @@
 #define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
 #define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
 #define CFG_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
-#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C1 clock mode (0-3) */
+#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
 #define CFG_ACR_RPTCNT		3	/* Arbiter repeat count */
 
 /* System IO Config */
@@ -708,6 +710,19 @@
 #define CONFIG_ETH1ADDR		00:E0:0C:00:8C:02
 #endif
 
+#if 1
+#define CONFIG_IPADDR		10.82.19.159
+#define CONFIG_SERVERIP		10.82.48.106
+#define CONFIG_GATEWAYIP	10.82.19.254
+#define CONFIG_NETMASK		255.255.252.0
+#define CONFIG_NETDEV		eth0
+
+#define CONFIG_HOSTNAME		mpc8349emitx
+#define CONFIG_ROOTPATH		/nfsroot0/u/timur/itx-ltib/rootfs
+#define CONFIG_BOOTFILE		timur/uImage
+
+#define CONFIG_UBOOTPATH	timur/u-boot.bin
+#else
 #define CONFIG_IPADDR		192.168.1.253
 #define CONFIG_SERVERIP		192.168.1.1
 #define CONFIG_GATEWAYIP	192.168.1.1
@@ -719,6 +734,8 @@
 #define CONFIG_BOOTFILE		uImage
 
 #define CONFIG_UBOOTPATH	u-boot.bin
+#endif
+
 #define CONFIG_UBOOTSTART	fe700000
 #define CONFIG_UBOOTEND		fe77ffff
 
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index a8f2df911e..2ff5f48980 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -330,7 +330,8 @@
 /* I2C */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
-#define CFG_I2C_SPEED	0x3F	/* I2C speed and slave address */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
 #define CFG_I2C_SLAVE	0x7F
 #define CFG_I2C_NOPROBES	{0x52} /* Don't probe these addrs */
 #define CFG_I2C_OFFSET	0x3000
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index b0b0673cff..728083b304 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -218,6 +218,7 @@ extern int tqm834x_num_flash_banks;
  */
 #define CONFIG_HARD_I2C				/* I2C with hardware support	*/
 #undef CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#define CONFIG_FSL_I2C
 #define CFG_I2C_SPEED			400000	/* I2C speed: 400KHz		*/
 #define CFG_I2C_SLAVE			0x7F	/* slave address		*/
 #define CFG_I2C_OFFSET			0x3000
-- 
cgit v1.2.1