From f348ab85f741dc98b2d202c04b5f430eace94925 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 24 Apr 2009 17:22:40 -0400 Subject: Blackfin: convert specific pre/post config headers to common method The Blackfin port was using asm/blackfin-config-{pre,post}.h to setup common Blackfin board defines. The common method now is to use config.h, so convert blackfin-config-post.h to that. Rename the still Blackfin specific blackfin-config-pre.h to config-pre.h so the naming conventions at least line up. Signed-off-by: Mike Frysinger --- include/asm-blackfin/config.h | 159 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 142 insertions(+), 17 deletions(-) (limited to 'include/asm-blackfin/config.h') diff --git a/include/asm-blackfin/config.h b/include/asm-blackfin/config.h index 049c44eaf8..6623fb7ae1 100644 --- a/include/asm-blackfin/config.h +++ b/include/asm-blackfin/config.h @@ -1,24 +1,149 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * config.h - setup common defines for Blackfin boards based on config.h * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * Copyright (c) 2007-2009 Analog Devices Inc. * + * Licensed under the GPL-2 or later. */ -#ifndef _ASM_CONFIG_H_ -#define _ASM_CONFIG_H_ +#ifndef __ASM_BLACKFIN_CONFIG_POST_H__ +#define __ASM_BLACKFIN_CONFIG_POST_H__ + +/* Sanity check CONFIG_BFIN_CPU */ +#ifndef CONFIG_BFIN_CPU +# error CONFIG_BFIN_CPU: your board config needs to define this +#endif + +/* Make sure the structure is properly aligned */ +#if ((CONFIG_SYS_GBL_DATA_ADDR & -4) != CONFIG_SYS_GBL_DATA_ADDR) +# error CONFIG_SYS_GBL_DATA_ADDR: must be 4 byte aligned +#endif + +/* Set default CONFIG_VCO_HZ if need be */ +#if !defined(CONFIG_VCO_HZ) +# if (CONFIG_CLKIN_HALF == 0) +# define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) +# else +# define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / 2) +# endif +#endif + +/* Set default CONFIG_CCLK_HZ if need be */ +#if !defined(CONFIG_CCLK_HZ) +# if (CONFIG_PLL_BYPASS == 0) +# define CONFIG_CCLK_HZ (CONFIG_VCO_HZ / CONFIG_CCLK_DIV) +# else +# define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +# endif +#endif + +/* Set default CONFIG_SCLK_HZ if need be */ +#if !defined(CONFIG_SCLK_HZ) +# if (CONFIG_PLL_BYPASS == 0) +# define CONFIG_SCLK_HZ (CONFIG_VCO_HZ / CONFIG_SCLK_DIV) +# else +# define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +# endif +#endif + +/* Since we use these to program PLL registers directly, + * make sure the values are sane and won't screw us up. + */ +#if (CONFIG_VCO_MULT & 0x3F) != CONFIG_VCO_MULT +# error CONFIG_VCO_MULT: Invalid value: must fit in 6 bits (0 - 63) +#endif +#if (CONFIG_CLKIN_HALF & 0x1) != CONFIG_CLKIN_HALF +# error CONFIG_CLKIN_HALF: Invalid value: must be 0 or 1 +#endif +#if (CONFIG_PLL_BYPASS & 0x1) != CONFIG_PLL_BYPASS +# error CONFIG_PLL_BYPASS: Invalid value: must be 0 or 1 +#endif + +/* Using L1 scratch pad makes sense for everyone by default. */ +#ifndef CONFIG_LINUX_CMDLINE_ADDR +# define CONFIG_LINUX_CMDLINE_ADDR L1_SRAM_SCRATCH +#endif +#ifndef CONFIG_LINUX_CMDLINE_SIZE +# define CONFIG_LINUX_CMDLINE_SIZE L1_SRAM_SCRATCH_SIZE +#endif + +/* Set default SPI flash CS to the one we boot from */ +#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_SPI_CS) +# define CONFIG_ENV_SPI_CS BFIN_BOOT_SPI_SSEL +#endif + +/* Default/common Blackfin memory layout */ +#ifndef CONFIG_SYS_SDRAM_BASE +# define CONFIG_SYS_SDRAM_BASE 0 +#endif +#ifndef CONFIG_SYS_MAX_RAM_SIZE +# define CONFIG_SYS_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) +#endif +#ifndef CONFIG_SYS_MONITOR_BASE +# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN) +#endif +#ifndef CONFIG_SYS_MALLOC_BASE +# define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) +#endif +#ifndef CONFIG_SYS_GBL_DATA_SIZE +# define CONFIG_SYS_GBL_DATA_SIZE (128) +#endif +#ifndef CONFIG_SYS_GBL_DATA_ADDR +# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE) +#endif +#ifndef CONFIG_STACKBASE +# define CONFIG_STACKBASE (CONFIG_SYS_GBL_DATA_ADDR - 4) +#endif +#ifndef CONFIG_SYS_MEMTEST_START +# define CONFIG_SYS_MEMTEST_START 0 +#endif +#ifndef CONFIG_SYS_MEMTEST_END +# define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 8192 + 4) +#endif + +/* Check to make sure everything fits in external RAM */ +#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE) +# error Memory Map does not fit into configuration +#endif + +/* Default/common Blackfin environment settings */ +#ifndef CONFIG_LOADADDR +# define CONFIG_LOADADDR 0x1000000 +#endif +#ifndef CONFIG_SYS_LOAD_ADDR +# define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#endif +#ifndef CONFIG_SYS_BOOTM_LEN +# define CONFIG_SYS_BOOTM_LEN 0x4000000 +#endif +#ifndef CONFIG_SYS_PROMPT +# define CONFIG_SYS_PROMPT "bfin> " +#endif +#ifndef CONFIG_SYS_CBSIZE +# ifdef CONFIG_CMD_KGDB +# define CONFIG_SYS_CBSIZE 1024 +# else +# define CONFIG_SYS_CBSIZE 256 +# endif +#endif +#ifndef CONFIG_SYS_BARGSIZE +# define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#endif +#ifndef CONFIG_SYS_PBSIZE +# define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#endif +#ifndef CONFIG_SYS_MAXARGS +# define CONFIG_SYS_MAXARGS 16 +#endif +#if defined(CONFIG_SYS_HZ) +# if (CONFIG_SYS_HZ != 1000) +# warning "CONFIG_SYS_HZ must always be 1000" +# endif +# undef CONFIG_SYS_HZ +#endif +#define CONFIG_SYS_HZ 1000 +#ifndef CONFIG_SYS_BAUDRATE_TABLE +# define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#endif #endif -- cgit v1.2.1