From 1bc1538613d66cef3cbce680fc8d7c3561a0fbd0 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 10 Jul 2009 11:03:19 -0500 Subject: Move examples/ to examples/standalone The current files in examples are all standalone application examples, so put them in their own subdirectory for organizational purposes Signed-off-by: Peter Tyser --- examples/standalone/test_burst.c | 319 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 319 insertions(+) create mode 100644 examples/standalone/test_burst.c (limited to 'examples/standalone/test_burst.c') diff --git a/examples/standalone/test_burst.c b/examples/standalone/test_burst.c new file mode 100644 index 0000000000..7109c098ef --- /dev/null +++ b/examples/standalone/test_burst.c @@ -0,0 +1,319 @@ +/* + * (C) Copyright 2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * The test exercises SDRAM accesses in burst mode + */ + +#include +#include + +#include +#include +#include + +#include +#include + +#include "test_burst.h" + +/* 8 MB test region of physical RAM */ +#define TEST_PADDR 0x00800000 +/* The uncached virtual region */ +#define TEST_VADDR_NC 0x00800000 +/* The cached virtual region */ +#define TEST_VADDR_C 0x01000000 +/* When an error is detected, the address where the error has been found, + and also the current and the expected data will be written to + the following flash address +*/ +#define TEST_FLASH_ADDR 0x40100000 + +/* Define GPIO ports to signal start of burst transfers and errors */ +#ifdef CONFIG_LWMON +/* Use PD.8 to signal start of burst transfers */ +#define GPIO1_DAT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) +#define GPIO1_BIT 0x0080 +/* Configure PD.8 as general purpose output */ +#define GPIO1_INIT \ + ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar &= ~GPIO1_BIT; \ + ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir |= GPIO1_BIT; +/* Use PD.9 to signal error */ +#define GPIO2_DAT (((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddat) +#define GPIO2_BIT 0x0040 +/* Configure PD.9 as general purpose output */ +#define GPIO2_INIT \ + ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pdpar &= ~GPIO2_BIT; \ + ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pddir |= GPIO2_BIT; +#endif /* CONFIG_LWMON */ + + +static void test_prepare (void); +static int test_burst_start (unsigned long size, unsigned long pattern); +static void test_map_8M (unsigned long paddr, unsigned long vaddr, int cached); +static int test_mmu_is_on(void); +static void test_desc(unsigned long size); +static void test_error(char * step, volatile void * addr, unsigned long val, unsigned long pattern); +static void signal_init(void); +static void signal_start(void); +static void signal_error(void); +static void test_usage(void); + +static unsigned long test_pattern [] = { + 0x00000000, + 0xffffffff, + 0x55555555, + 0xaaaaaaaa, +}; + + +int test_burst (int argc, char *argv[]) +{ + unsigned long size = CACHE_LINE_SIZE; + unsigned int pass = 0; + int res = 0; + int i, j; + + if (argc == 3) { + char * d; + for (size = 0, d = argv[1]; *d >= '0' && *d <= '9'; d++) { + size *= 10; + size += *d - '0'; + } + if (size == 0 || *d) { + test_usage(); + return 1; + } + for (d = argv[2]; *d >= '0' && *d <= '9'; d++) { + pass *= 10; + pass += *d - '0'; + } + if (*d) { + test_usage(); + return 1; + } + } else if (argc > 3) { + test_usage(); + return 1; + } + + size += (CACHE_LINE_SIZE - 1); + size &= ~(CACHE_LINE_SIZE - 1); + + if (!test_mmu_is_on()) { + test_prepare(); + } + + test_desc(size); + + for (j = 0; !pass || j < pass; j++) { + for (i = 0; i < sizeof(test_pattern) / sizeof(test_pattern[0]); + i++) { + res = test_burst_start(size, test_pattern[i]); + if (res != 0) { + goto Done; + } + } + + printf ("Iteration #%d passed\n", j + 1); + + if (tstc() && 0x03 == getc()) + break; + } +Done: + return res; +} + +static void test_prepare (void) +{ + printf ("\n"); + + caches_init(); + disable_interrupts(); + mmu_init(); + + printf ("Interrupts are disabled\n"); + printf ("I-Cache is ON\n"); + printf ("D-Cache is ON\n"); + printf ("MMU is ON\n"); + + printf ("\n"); + + test_map_8M (TEST_PADDR, TEST_VADDR_NC, 0); + test_map_8M (TEST_PADDR, TEST_VADDR_C, 1); + + test_map_8M (TEST_FLASH_ADDR & 0xFF800000, TEST_FLASH_ADDR & 0xFF800000, 0); + + /* Configure GPIO ports */ + signal_init(); +} + +static int test_burst_start (unsigned long size, unsigned long pattern) +{ + volatile unsigned long * vaddr_c = (unsigned long *)TEST_VADDR_C; + volatile unsigned long * vaddr_nc = (unsigned long *)TEST_VADDR_NC; + int i, n; + int res = 1; + + printf ("Test pattern %08lx ...", pattern); + + n = size / 4; + + for (i = 0; i < n; i ++) { + vaddr_c [i] = pattern; + } + signal_start(); + flush_dcache_range((unsigned long)vaddr_c, (unsigned long)(vaddr_c + n) - 1); + + for (i = 0; i < n; i ++) { + register unsigned long tmp = vaddr_nc [i]; + if (tmp != pattern) { + test_error("2a", vaddr_nc + i, tmp, pattern); + goto Done; + } + } + + for (i = 0; i < n; i ++) { + register unsigned long tmp = vaddr_c [i]; + if (tmp != pattern) { + test_error("2b", vaddr_c + i, tmp, pattern); + goto Done; + } + } + + for (i = 0; i < n; i ++) { + vaddr_nc [i] = pattern; + } + + for (i = 0; i < n; i ++) { + register unsigned long tmp = vaddr_nc [i]; + if (tmp != pattern) { + test_error("3a", vaddr_nc + i, tmp, pattern); + goto Done; + } + } + + signal_start(); + for (i = 0; i < n; i ++) { + register unsigned long tmp = vaddr_c [i]; + if (tmp != pattern) { + test_error("3b", vaddr_c + i, tmp, pattern); + goto Done; + } + } + + res = 0; +Done: + printf(" %s\n", res == 0 ? "OK" : ""); + + return res; +} + +static void test_map_8M (unsigned long paddr, unsigned long vaddr, int cached) +{ + mtspr (MD_EPN, (vaddr & 0xFFFFFC00) | MI_EVALID); + mtspr (MD_TWC, MI_PS8MEG | MI_SVALID); + mtspr (MD_RPN, (paddr & 0xFFFFF000) | MI_BOOTINIT | (cached ? 0 : 2)); + mtspr (MD_AP, MI_Kp); +} + +static int test_mmu_is_on(void) +{ + unsigned long msr; + + asm volatile("mfmsr %0" : "=r" (msr) :); + + return msr & MSR_DR; +} + +static void test_desc(unsigned long size) +{ + printf( + "The following tests will be conducted:\n" + "1) Map %ld-byte region of physical RAM at 0x%08x\n" + " into two virtual regions:\n" + " one cached at 0x%08x and\n" + " the the other uncached at 0x%08x.\n", + size, TEST_PADDR, TEST_VADDR_NC, TEST_VADDR_C); + + puts( + "2) Fill the cached region with a pattern, and flush the cache\n" + "2a) Check the uncached region to match the pattern\n" + "2b) Check the cached region to match the pattern\n" + "3) Fill the uncached region with a pattern\n" + "3a) Check the cached region to match the pattern\n" + "3b) Check the uncached region to match the pattern\n" + "2b) Change the patterns and go to step 2\n" + "\n" + ); +} + +static void test_error( + char * step, volatile void * addr, unsigned long val, unsigned long pattern) +{ + volatile unsigned long * p = (void *)TEST_FLASH_ADDR; + + signal_error(); + + p[0] = (unsigned long)addr; + p[1] = val; + p[2] = pattern; + + printf ("\nError at step %s, addr %08lx: read %08lx, pattern %08lx", + step, (unsigned long)addr, val, pattern); +} + +static void signal_init(void) +{ +#if defined(GPIO1_INIT) + GPIO1_INIT; +#endif +#if defined(GPIO2_INIT) + GPIO2_INIT; +#endif +} + +static void signal_start(void) +{ +#if defined(GPIO1_INIT) + if (GPIO1_DAT & GPIO1_BIT) { + GPIO1_DAT &= ~GPIO1_BIT; + } else { + GPIO1_DAT |= GPIO1_BIT; + } +#endif +} + +static void signal_error(void) +{ +#if defined(GPIO2_INIT) + if (GPIO2_DAT & GPIO2_BIT) { + GPIO2_DAT &= ~GPIO2_BIT; + } else { + GPIO2_DAT |= GPIO2_BIT; + } +#endif +} + +static void test_usage(void) +{ + printf("Usage: go 0x40004 [size] [count]\n"); +} -- cgit v1.2.1