From 2731b9a86685190d26b1883f27afda5ac8e1a313 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 3 Apr 2009 12:46:58 +0200 Subject: drivers/usb: regorganisation move to linux usb driver organisation as following drivers/usb/gadget drivers/usb/host drivers/usb/musb Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Remy Bohmer --- drivers/usb/gadget/mpc8xx_udc.c | 1399 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 1399 insertions(+) create mode 100644 drivers/usb/gadget/mpc8xx_udc.c (limited to 'drivers/usb/gadget/mpc8xx_udc.c') diff --git a/drivers/usb/gadget/mpc8xx_udc.c b/drivers/usb/gadget/mpc8xx_udc.c new file mode 100644 index 0000000000..da3fbba722 --- /dev/null +++ b/drivers/usb/gadget/mpc8xx_udc.c @@ -0,0 +1,1399 @@ +/* + * Copyright (C) 2006 by Bryan O'Donoghue, CodeHermit + * bodonoghue@CodeHermit.ie + * + * References + * DasUBoot/drivers/usb/gadget/omap1510_udc.c, for design and implementation + * ideas. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +/* + * Notes : + * 1. #define __SIMULATE_ERROR__ to inject a CRC error into every 2nd TX + * packet to force the USB re-transmit protocol. + * + * 2. #define __DEBUG_UDC__ to switch on debug tracing to serial console + * be careful that tracing doesn't create Hiesen-bugs with respect to + * response timeouts to control requests. + * + * 3. This driver should be able to support any higher level driver that + * that wants to do either of the two standard UDC implementations + * Control-Bulk-Interrupt or Bulk-IN/Bulk-Out standards. Hence + * gserial and cdc_acm should work with this code. + * + * 4. NAK events never actually get raised at all, the documentation + * is just wrong ! + * + * 5. For some reason, cbd_datlen is *always* +2 the value it should be. + * this means that having an RX cbd of 16 bytes is not possible, since + * the same size is reported for 14 bytes received as 16 bytes received + * until we can find out why this happens, RX cbds must be limited to 8 + * bytes. TODO: check errata for this behaviour. + * + * 6. Right now this code doesn't support properly powering up with the USB + * cable attached to the USB host my development board the Adder87x doesn't + * have a pull-up fitted to allow this, so it is necessary to power the + * board and *then* attached the USB cable to the host. However somebody + * with a different design in their board may be able to keep the cable + * constantly connected and simply enable/disable a pull-up re + * figure 31.1 in MPC885RM.pdf instead of having to power up the board and + * then attach the cable ! + * + */ +#include +#include +#include +#include +#include + +#include "ep0.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define ERR(fmt, args...)\ + serial_printf("ERROR : [%s] %s:%d: "fmt,\ + __FILE__,__FUNCTION__,__LINE__, ##args) +#ifdef __DEBUG_UDC__ +#define DBG(fmt,args...)\ + serial_printf("[%s] %s:%d: "fmt,\ + __FILE__,__FUNCTION__,__LINE__, ##args) +#else +#define DBG(fmt,args...) +#endif + +/* Static Data */ +#ifdef __SIMULATE_ERROR__ +static char err_poison_test = 0; +#endif +static struct mpc8xx_ep ep_ref[MAX_ENDPOINTS]; +static u32 address_base = STATE_NOT_READY; +static mpc8xx_udc_state_t udc_state = 0; +static struct usb_device_instance *udc_device = 0; +static volatile usb_epb_t *endpoints[MAX_ENDPOINTS]; +static volatile cbd_t *tx_cbd[TX_RING_SIZE]; +static volatile cbd_t *rx_cbd[RX_RING_SIZE]; +static volatile immap_t *immr = 0; +static volatile cpm8xx_t *cp = 0; +static volatile usb_pram_t *usb_paramp = 0; +static volatile usb_t *usbp = 0; +static int rx_ct = 0; +static int tx_ct = 0; + +/* Static Function Declarations */ +static void mpc8xx_udc_state_transition_up (usb_device_state_t initial, + usb_device_state_t final); +static void mpc8xx_udc_state_transition_down (usb_device_state_t initial, + usb_device_state_t final); +static void mpc8xx_udc_stall (unsigned int ep); +static void mpc8xx_udc_flush_tx_fifo (int epid); +static void mpc8xx_udc_flush_rx_fifo (void); +static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi, + struct urb *tx_urb); +static void mpc8xx_udc_dump_request (struct usb_device_request *request); +static void mpc8xx_udc_clock_init (volatile immap_t * immr, + volatile cpm8xx_t * cp); +static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi); +static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_cbd_init (void); +static void mpc8xx_udc_endpoint_init (void); +static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size); +static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment); +static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp); +static void mpc8xx_udc_set_nak (unsigned int ep); +static short mpc8xx_udc_handle_txerr (void); +static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid); + +/****************************************************************************** + Global Linkage + *****************************************************************************/ + +/* udc_init + * + * Do initial bus gluing + */ +int udc_init (void) +{ + /* Init various pointers */ + immr = (immap_t *) CONFIG_SYS_IMMR; + cp = (cpm8xx_t *) & (immr->im_cpm); + usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]); + usbp = (usb_t *) & (cp->cp_scc[0]); + + memset (ep_ref, 0x00, (sizeof (struct mpc8xx_ep) * MAX_ENDPOINTS)); + + udc_device = 0; + udc_state = STATE_NOT_READY; + + usbp->usmod = 0x00; + usbp->uscom = 0; + + /* Set USB Frame #0, Respond at Address & Get a clock source */ + usbp->usaddr = 0x00; + mpc8xx_udc_clock_init (immr, cp); + + /* PA15, PA14 as perhiperal USBRXD and USBOE */ + immr->im_ioport.iop_padir &= ~0x0003; + immr->im_ioport.iop_papar |= 0x0003; + + /* PC11/PC10 as peripheral USBRXP USBRXN */ + immr->im_ioport.iop_pcso |= 0x0030; + + /* PC7/PC6 as perhiperal USBTXP and USBTXN */ + immr->im_ioport.iop_pcdir |= 0x0300; + immr->im_ioport.iop_pcpar |= 0x0300; + + /* Set the base address */ + address_base = (u32) (cp->cp_dpmem + CPM_USB_BASE); + + /* Initialise endpoints and circular buffers */ + mpc8xx_udc_endpoint_init (); + mpc8xx_udc_cbd_init (); + + /* Assign allocated Dual Port Endpoint descriptors */ + usb_paramp->ep0ptr = (u32) endpoints[0]; + usb_paramp->ep1ptr = (u32) endpoints[1]; + usb_paramp->ep2ptr = (u32) endpoints[2]; + usb_paramp->ep3ptr = (u32) endpoints[3]; + usb_paramp->frame_n = 0; + + DBG ("ep0ptr=0x%08x ep1ptr=0x%08x ep2ptr=0x%08x ep3ptr=0x%08x\n", + usb_paramp->ep0ptr, usb_paramp->ep1ptr, usb_paramp->ep2ptr, + usb_paramp->ep3ptr); + + return 0; +} + +/* udc_irq + * + * Poll for whatever events may have occured + */ +void udc_irq (void) +{ + int epid = 0; + volatile cbd_t *rx_cbdp = 0; + volatile cbd_t *rx_cbdp_base = 0; + + if (udc_state != STATE_READY) { + return; + } + + if (usbp->usber & USB_E_BSY) { + /* This shouldn't happen. If it does then it's a bug ! */ + usbp->usber |= USB_E_BSY; + mpc8xx_udc_flush_rx_fifo (); + } + + /* Scan all RX/Bidirectional Endpoints for RX data. */ + for (epid = 0; epid < MAX_ENDPOINTS; epid++) { + if (!ep_ref[epid].prx) { + continue; + } + rx_cbdp = rx_cbdp_base = ep_ref[epid].prx; + + do { + if (!(rx_cbdp->cbd_sc & RX_BD_E)) { + + if (rx_cbdp->cbd_sc & 0x1F) { + /* Corrupt data discard it. + * Controller has NAK'd this packet. + */ + mpc8xx_udc_clear_rxbd (rx_cbdp); + + } else { + if (!epid) { + mpc8xx_udc_ep0_rx (rx_cbdp); + + } else { + /* Process data */ + mpc8xx_udc_set_nak (epid); + mpc8xx_udc_epn_rx (epid, rx_cbdp); + mpc8xx_udc_clear_rxbd (rx_cbdp); + } + } + + /* Advance RX CBD pointer */ + mpc8xx_udc_advance_rx (&rx_cbdp, epid); + ep_ref[epid].prx = rx_cbdp; + } else { + /* Advance RX CBD pointer */ + mpc8xx_udc_advance_rx (&rx_cbdp, epid); + } + + } while (rx_cbdp != rx_cbdp_base); + } + + /* Handle TX events as appropiate, the correct place to do this is + * in a tx routine. Perhaps TX on epn was pre-empted by ep0 + */ + + if (usbp->usber & USB_E_TXB) { + usbp->usber |= USB_E_TXB; + } + + if (usbp->usber & (USB_TX_ERRMASK)) { + mpc8xx_udc_handle_txerr (); + } + + /* Switch to the default state, respond at the default address */ + if (usbp->usber & USB_E_RESET) { + usbp->usber |= USB_E_RESET; + usbp->usaddr = 0x00; + udc_device->device_state = STATE_DEFAULT; + } + + /* if(usbp->usber&USB_E_IDLE){ + We could suspend here ! + usbp->usber|=USB_E_IDLE; + DBG("idle state change\n"); + } + if(usbp->usbs){ + We could resume here when IDLE is deasserted ! + Not worth doing, so long as we are self powered though. + } + */ + + return; +} + +/* udc_endpoint_write + * + * Write some data to an endpoint + */ +int udc_endpoint_write (struct usb_endpoint_instance *epi) +{ + int ep = 0; + short epid = 1, unnak = 0, ret = 0; + + if (udc_state != STATE_READY) { + ERR ("invalid udc_state != STATE_READY!\n"); + return -1; + } + + if (!udc_device || !epi) { + return -1; + } + + if (udc_device->device_state != STATE_CONFIGURED) { + return -1; + } + + ep = epi->endpoint_address & 0x03; + if (ep >= MAX_ENDPOINTS) { + return -1; + } + + /* Set NAK for all RX endpoints during TX */ + for (epid = 1; epid < MAX_ENDPOINTS; epid++) { + + /* Don't set NAK on DATA IN/CONTROL endpoints */ + if (ep_ref[epid].sc & USB_DIR_IN) { + continue; + } + + if (!(usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK))) { + unnak |= 1 << epid; + } + + mpc8xx_udc_set_nak (epid); + } + + mpc8xx_udc_init_tx (&udc_device->bus->endpoint_array[ep], + epi->tx_urb); + ret = mpc8xx_udc_ep_tx (&udc_device->bus->endpoint_array[ep]); + + /* Remove temporary NAK */ + for (epid = 1; epid < MAX_ENDPOINTS; epid++) { + if (unnak & (1 << epid)) { + udc_unset_nak (epid); + } + } + + return ret; +} + +/* mpc8xx_udc_assign_urb + * + * Associate a given urb to an endpoint TX or RX transmit/receive buffers + */ +static int mpc8xx_udc_assign_urb (int ep, char direction) +{ + struct usb_endpoint_instance *epi = 0; + + if (ep >= MAX_ENDPOINTS) { + goto err; + } + epi = &udc_device->bus->endpoint_array[ep]; + if (!epi) { + goto err; + } + + if (!ep_ref[ep].urb) { + ep_ref[ep].urb = usbd_alloc_urb (udc_device, udc_device->bus->endpoint_array); + if (!ep_ref[ep].urb) { + goto err; + } + } else { + ep_ref[ep].urb->actual_length = 0; + } + + switch (direction) { + case USB_DIR_IN: + epi->tx_urb = ep_ref[ep].urb; + break; + case USB_DIR_OUT: + epi->rcv_urb = ep_ref[ep].urb; + break; + default: + goto err; + } + return 0; + + err: + udc_state = STATE_ERROR; + return -1; +} + +/* udc_setup_ep + * + * Associate U-Boot software endpoints to mpc8xx endpoint parameter ram + * Isochronous endpoints aren't yet supported! + */ +void udc_setup_ep (struct usb_device_instance *device, unsigned int ep, + struct usb_endpoint_instance *epi) +{ + uchar direction = 0; + int ep_attrib = 0; + + if (epi && (ep < MAX_ENDPOINTS)) { + + if (ep == 0) { + if (epi->rcv_attributes != USB_ENDPOINT_XFER_CONTROL + || epi->tx_attributes != + USB_ENDPOINT_XFER_CONTROL) { + + /* ep0 must be a control endpoint */ + udc_state = STATE_ERROR; + return; + + } + if (!(ep_ref[ep].sc & EP_ATTACHED)) { + mpc8xx_udc_cbd_attach (ep, epi->tx_packetSize, + epi->rcv_packetSize); + } + usbp->usep[ep] = 0x0000; + return; + } + + if ((epi->endpoint_address & USB_ENDPOINT_DIR_MASK) + == USB_DIR_IN) { + + direction = 1; + ep_attrib = epi->tx_attributes; + epi->rcv_packetSize = 0; + ep_ref[ep].sc |= USB_DIR_IN; + } else { + + direction = 0; + ep_attrib = epi->rcv_attributes; + epi->tx_packetSize = 0; + ep_ref[ep].sc &= ~USB_DIR_IN; + } + + if (mpc8xx_udc_assign_urb (ep, epi->endpoint_address + & USB_ENDPOINT_DIR_MASK)) { + return; + } + + switch (ep_attrib) { + case USB_ENDPOINT_XFER_CONTROL: + if (!(ep_ref[ep].sc & EP_ATTACHED)) { + mpc8xx_udc_cbd_attach (ep, + epi->tx_packetSize, + epi->rcv_packetSize); + } + usbp->usep[ep] = ep << 12; + epi->rcv_urb = epi->tx_urb = ep_ref[ep].urb; + + break; + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + if (!(ep_ref[ep].sc & EP_ATTACHED)) { + if (direction) { + mpc8xx_udc_cbd_attach (ep, + epi->tx_packetSize, + 0); + } else { + mpc8xx_udc_cbd_attach (ep, + 0, + epi->rcv_packetSize); + } + } + usbp->usep[ep] = (ep << 12) | ((ep_attrib) << 8); + + break; + case USB_ENDPOINT_XFER_ISOC: + default: + serial_printf ("Error endpoint attrib %d>3\n", ep_attrib); + udc_state = STATE_ERROR; + break; + } + } + +} + +/* udc_connect + * + * Move state, switch on the USB + */ +void udc_connect (void) +{ + /* Enable pull-up resistor on D+ + * TODO: fit a pull-up resistor to drive SE0 for > 2.5us + */ + + if (udc_state != STATE_ERROR) { + udc_state = STATE_READY; + usbp->usmod |= USMOD_EN; + } +} + +/* udc_disconnect + * + * Disconnect is not used but, is included for completeness + */ +void udc_disconnect (void) +{ + /* Disable pull-up resistor on D- + * TODO: fix a pullup resistor to control this + */ + + if (udc_state != STATE_ERROR) { + udc_state = STATE_NOT_READY; + } + usbp->usmod &= ~USMOD_EN; +} + +/* udc_enable + * + * Grab an EP0 URB, register interest in a subset of USB events + */ +void udc_enable (struct usb_device_instance *device) +{ + if (udc_state == STATE_ERROR) { + return; + } + + udc_device = device; + + if (!ep_ref[0].urb) { + ep_ref[0].urb = usbd_alloc_urb (device, device->bus->endpoint_array); + } + + /* Register interest in all events except SOF, enable transceiver */ + usbp->usber = 0x03FF; + usbp->usbmr = 0x02F7; + + return; +} + +/* udc_disable + * + * disable the currently hooked device + */ +void udc_disable (void) +{ + int i = 0; + + if (udc_state == STATE_ERROR) { + DBG ("Won't disable UDC. udc_state==STATE_ERROR !\n"); + return; + } + + udc_device = 0; + + for (; i < MAX_ENDPOINTS; i++) { + if (ep_ref[i].urb) { + usbd_dealloc_urb (ep_ref[i].urb); + ep_ref[i].urb = 0; + } + } + + usbp->usbmr = 0x00; + usbp->usmod = ~USMOD_EN; + udc_state = STATE_NOT_READY; +} + +/* udc_startup_events + * + * Enable the specified device + */ +void udc_startup_events (struct usb_device_instance *device) +{ + udc_enable (device); + if (udc_state == STATE_READY) { + usbd_device_event_irq (device, DEVICE_CREATE, 0); + } +} + +/* udc_set_nak + * + * Allow upper layers to signal lower layers should not accept more RX data + * + */ +void udc_set_nak (int epid) +{ + if (epid) { + mpc8xx_udc_set_nak (epid); + } +} + +/* udc_unset_nak + * + * Suspend sending of NAK tokens for DATA OUT tokens on a given endpoint. + * Switch off NAKing on this endpoint to accept more data output from host. + * + */ +void udc_unset_nak (int epid) +{ + if (epid > MAX_ENDPOINTS) { + return; + } + + if (usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK)) { + usbp->usep[epid] &= ~(USEP_THS_NAK | USEP_RHS_NAK); + __asm__ ("eieio"); + } +} + +/****************************************************************************** + Static Linkage +******************************************************************************/ + +/* udc_state_transition_up + * udc_state_transition_down + * + * Helper functions to implement device state changes. The device states and + * the events that transition between them are: + * + * STATE_ATTACHED + * || /\ + * \/ || + * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET + * || /\ + * \/ || + * STATE_POWERED + * || /\ + * \/ || + * DEVICE_RESET DEVICE_POWER_INTERRUPTION + * || /\ + * \/ || + * STATE_DEFAULT + * || /\ + * \/ || + * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET + * || /\ + * \/ || + * STATE_ADDRESSED + * || /\ + * \/ || + * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED + * || /\ + * \/ || + * STATE_CONFIGURED + * + * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED + * to STATE_CONFIGURED) from the specified initial state to the specified final + * state, passing through each intermediate state on the way. If the initial + * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then + * no state transitions will take place. + * + * udc_state_transition_down transitions down (in the direction from + * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the + * specified final state, passing through each intermediate state on the way. + * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final + * state, then no state transitions will take place. + * + */ + +static void mpc8xx_udc_state_transition_up (usb_device_state_t initial, + usb_device_state_t final) +{ + if (initial < final) { + switch (initial) { + case STATE_ATTACHED: + usbd_device_event_irq (udc_device, + DEVICE_HUB_CONFIGURED, 0); + if (final == STATE_POWERED) + break; + case STATE_POWERED: + usbd_device_event_irq (udc_device, DEVICE_RESET, 0); + if (final == STATE_DEFAULT) + break; + case STATE_DEFAULT: + usbd_device_event_irq (udc_device, + DEVICE_ADDRESS_ASSIGNED, 0); + if (final == STATE_ADDRESSED) + break; + case STATE_ADDRESSED: + usbd_device_event_irq (udc_device, DEVICE_CONFIGURED, + 0); + case STATE_CONFIGURED: + break; + default: + break; + } + } +} + +static void mpc8xx_udc_state_transition_down (usb_device_state_t initial, + usb_device_state_t final) +{ + if (initial > final) { + switch (initial) { + case STATE_CONFIGURED: + usbd_device_event_irq (udc_device, + DEVICE_DE_CONFIGURED, 0); + if (final == STATE_ADDRESSED) + break; + case STATE_ADDRESSED: + usbd_device_event_irq (udc_device, DEVICE_RESET, 0); + if (final == STATE_DEFAULT) + break; + case STATE_DEFAULT: + usbd_device_event_irq (udc_device, + DEVICE_POWER_INTERRUPTION, 0); + if (final == STATE_POWERED) + break; + case STATE_POWERED: + usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, + 0); + case STATE_ATTACHED: + break; + default: + break; + } + } +} + +/* mpc8xx_udc_stall + * + * Force returning of STALL tokens on the given endpoint. Protocol or function + * STALL conditions are permissable here + */ +static void mpc8xx_udc_stall (unsigned int ep) +{ + usbp->usep[ep] |= STALL_BITMASK; +} + +/* mpc8xx_udc_set_nak + * + * Force returning of NAK responses for the given endpoint as a kind of very + * simple flow control + */ +static void mpc8xx_udc_set_nak (unsigned int ep) +{ + usbp->usep[ep] |= NAK_BITMASK; + __asm__ ("eieio"); +} + +/* mpc8xx_udc_handle_txerr + * + * Handle errors relevant to TX. Return a status code to allow calling + * indicative of what if anything happened + */ +static short mpc8xx_udc_handle_txerr () +{ + short ep = 0, ret = 0; + + for (; ep < TX_RING_SIZE; ep++) { + if (usbp->usber & (0x10 << ep)) { + + /* Timeout or underrun */ + if (tx_cbd[ep]->cbd_sc & 0x06) { + ret = 1; + mpc8xx_udc_flush_tx_fifo (ep); + + } else { + if (usbp->usep[ep] & STALL_BITMASK) { + if (!ep) { + usbp->usep[ep] &= ~STALL_BITMASK; + } + } /* else NAK */ + } + usbp->usber |= (0x10 << ep); + } + } + return ret; +} + +/* mpc8xx_udc_advance_rx + * + * Advance cbd rx + */ +static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid) +{ + if ((*rx_cbdp)->cbd_sc & RX_BD_W) { + *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CONFIG_SYS_IMMR); + + } else { + (*rx_cbdp)++; + } +} + + +/* mpc8xx_udc_flush_tx_fifo + * + * Flush a given TX fifo. Assumes one tx cbd per endpoint + */ +static void mpc8xx_udc_flush_tx_fifo (int epid) +{ + volatile cbd_t *tx_cbdp = 0; + + if (epid > MAX_ENDPOINTS) { + return; + } + + /* TX stop */ + immr->im_cpm.cp_cpcr = ((epid << 2) | 0x1D01); + __asm__ ("eieio"); + while (immr->im_cpm.cp_cpcr & 0x01); + + usbp->uscom = 0x40 | 0; + + /* reset ring */ + tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CONFIG_SYS_IMMR); + tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W); + + + endpoints[epid]->tptr = endpoints[epid]->tbase; + endpoints[epid]->tstate = 0x00; + endpoints[epid]->tbcnt = 0x00; + + /* TX start */ + immr->im_cpm.cp_cpcr = ((epid << 2) | 0x2D01); + __asm__ ("eieio"); + while (immr->im_cpm.cp_cpcr & 0x01); + + return; +} + +/* mpc8xx_udc_flush_rx_fifo + * + * For the sake of completeness of the namespace, it seems like + * a good-design-decision (tm) to include mpc8xx_udc_flush_rx_fifo(); + * If RX_BD_E is true => a driver bug either here or in an upper layer + * not polling frequently enough. If RX_BD_E is true we have told the host + * we have accepted data but, the CPM found it had no-where to put that data + * which needless to say would be a bad thing. + */ +static void mpc8xx_udc_flush_rx_fifo () +{ + int i = 0; + + for (i = 0; i < RX_RING_SIZE; i++) { + if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) { + ERR ("buf %p used rx data len = 0x%x sc=0x%x!\n", + rx_cbd[i], rx_cbd[i]->cbd_datlen, + rx_cbd[i]->cbd_sc); + + } + } + ERR ("BUG : Input over-run\n"); +} + +/* mpc8xx_udc_clear_rxbd + * + * Release control of RX CBD to CP. + */ +static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp) +{ + rx_cbdp->cbd_datlen = 0x0000; + rx_cbdp->cbd_sc = ((rx_cbdp->cbd_sc & RX_BD_W) | (RX_BD_E | RX_BD_I)); + __asm__ ("eieio"); +} + +/* mpc8xx_udc_tx_irq + * + * Parse for tx timeout, control RX or USB reset/busy conditions + * Return -1 on timeout, -2 on fatal error, else return zero + */ +static int mpc8xx_udc_tx_irq (int ep) +{ + int i = 0; + + if (usbp->usber & (USB_TX_ERRMASK)) { + if (mpc8xx_udc_handle_txerr ()) { + /* Timeout, controlling function must retry send */ + return -1; + } + } + + if (usbp->usber & (USB_E_RESET | USB_E_BSY)) { + /* Fatal, abandon TX transaction */ + return -2; + } + + if (usbp->usber & USB_E_RXB) { + for (i = 0; i < RX_RING_SIZE; i++) { + if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) { + if ((rx_cbd[i] == ep_ref[0].prx) || ep) { + return -2; + } + } + } + } + + return 0; +} + +/* mpc8xx_udc_ep_tx + * + * Transmit in a re-entrant fashion outbound USB packets. + * Implement retry/timeout mechanism described in USB specification + * Toggle DATA0/DATA1 pids as necessary + * Introduces non-standard tx_retry. The USB standard has no scope for slave + * devices to give up TX, however tx_retry stops us getting stuck in an endless + * TX loop. + */ +static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi) +{ + struct urb *urb = epi->tx_urb; + volatile cbd_t *tx_cbdp = 0; + unsigned int ep = 0, pkt_len = 0, x = 0, tx_retry = 0; + int ret = 0; + + if (!epi || (epi->endpoint_address & 0x03) >= MAX_ENDPOINTS || !urb) { + return -1; + } + + ep = epi->endpoint_address & 0x03; + tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CONFIG_SYS_IMMR); + + if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) { + mpc8xx_udc_flush_tx_fifo (ep); + usbp->usber |= USB_E_TXB; + }; + + while (tx_retry++ < 100) { + ret = mpc8xx_udc_tx_irq (ep); + if (ret == -1) { + /* ignore timeout here */ + } else if (ret == -2) { + /* Abandon TX */ + mpc8xx_udc_flush_tx_fifo (ep); + return -1; + } + + tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CONFIG_SYS_IMMR); + while (tx_cbdp->cbd_sc & TX_BD_R) { + }; + tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W); + + pkt_len = urb->actual_length - epi->sent; + + if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) { + pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT); + } + + for (x = 0; x < pkt_len; x++) { + *((unsigned char *) (tx_cbdp->cbd_bufaddr + x)) = + urb->buffer[epi->sent + x]; + } + tx_cbdp->cbd_datlen = pkt_len; + tx_cbdp->cbd_sc |= (CBD_TX_BITMASK | ep_ref[ep].pid); + __asm__ ("eieio"); + +#ifdef __SIMULATE_ERROR__ + if (++err_poison_test == 2) { + err_poison_test = 0; + tx_cbdp->cbd_sc &= ~TX_BD_TC; + } +#endif + + usbp->uscom = (USCOM_STR | ep); + + while (!(usbp->usber & USB_E_TXB)) { + ret = mpc8xx_udc_tx_irq (ep); + if (ret == -1) { + /* TX timeout */ + break; + } else if (ret == -2) { + if (usbp->usber & USB_E_TXB) { + usbp->usber |= USB_E_TXB; + } + mpc8xx_udc_flush_tx_fifo (ep); + return -1; + } + }; + + if (usbp->usber & USB_E_TXB) { + usbp->usber |= USB_E_TXB; + } + + /* ACK must be present <= 18bit times from TX */ + if (ret == -1) { + continue; + } + + /* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */ + epi->sent += pkt_len; + epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize); + TOGGLE_TX_PID (ep_ref[ep].pid); + + if (epi->sent >= epi->tx_urb->actual_length) { + + epi->tx_urb->actual_length = 0; + epi->sent = 0; + + if (ep_ref[ep].sc & EP_SEND_ZLP) { + ep_ref[ep].sc &= ~EP_SEND_ZLP; + } else { + return 0; + } + } + } + + ERR ("TX fail, endpoint 0x%x tx bytes 0x%x/0x%x\n", ep, epi->sent, + epi->tx_urb->actual_length); + + return -1; +} + +/* mpc8xx_udc_dump_request + * + * Dump a control request to console + */ +static void mpc8xx_udc_dump_request (struct usb_device_request *request) +{ + DBG ("bmRequestType:%02x bRequest:%02x wValue:%04x " + "wIndex:%04x wLength:%04x ?\n", + request->bmRequestType, + request->bRequest, + request->wValue, request->wIndex, request->wLength); + + return; +} + +/* mpc8xx_udc_ep0_rx_setup + * + * Decode received ep0 SETUP packet. return non-zero on error + */ +static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp) +{ + unsigned int x = 0; + struct urb *purb = ep_ref[0].urb; + struct usb_endpoint_instance *epi = + &udc_device->bus->endpoint_array[0]; + + for (; x < rx_cbdp->cbd_datlen; x++) { + *(((unsigned char *) &ep_ref[0].urb->device_request) + x) = + *((unsigned char *) (rx_cbdp->cbd_bufaddr + x)); + } + + mpc8xx_udc_clear_rxbd (rx_cbdp); + + if (ep0_recv_setup (purb)) { + mpc8xx_udc_dump_request (&purb->device_request); + return -1; + } + + if ((purb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) + == USB_REQ_HOST2DEVICE) { + + switch (purb->device_request.bRequest) { + case USB_REQ_SET_ADDRESS: + /* Send the Status OUT ZLP */ + ep_ref[0].pid = TX_BD_PID_DATA1; + purb->actual_length = 0; + mpc8xx_udc_init_tx (epi, purb); + mpc8xx_udc_ep_tx (epi); + + /* Move to the addressed state */ + usbp->usaddr = udc_device->address; + mpc8xx_udc_state_transition_up (udc_device->device_state, + STATE_ADDRESSED); + return 0; + + case USB_REQ_SET_CONFIGURATION: + if (!purb->device_request.wValue) { + /* Respond at default address */ + usbp->usaddr = 0x00; + mpc8xx_udc_state_transition_down (udc_device->device_state, + STATE_ADDRESSED); + } else { + /* TODO: Support multiple configurations */ + mpc8xx_udc_state_transition_up (udc_device->device_state, + STATE_CONFIGURED); + for (x = 1; x < MAX_ENDPOINTS; x++) { + if ((udc_device->bus->endpoint_array[x].endpoint_address & USB_ENDPOINT_DIR_MASK) + == USB_DIR_IN) { + ep_ref[x].pid = TX_BD_PID_DATA0; + } else { + ep_ref[x].pid = RX_BD_PID_DATA0; + } + /* Set configuration must unstall endpoints */ + usbp->usep[x] &= ~STALL_BITMASK; + } + } + break; + default: + /* CDC/Vendor specific */ + break; + } + + /* Send ZLP as ACK in Status OUT phase */ + ep_ref[0].pid = TX_BD_PID_DATA1; + purb->actual_length = 0; + mpc8xx_udc_init_tx (epi, purb); + mpc8xx_udc_ep_tx (epi); + + } else { + + if (purb->actual_length) { + ep_ref[0].pid = TX_BD_PID_DATA1; + mpc8xx_udc_init_tx (epi, purb); + + if (!(purb->actual_length % EP0_MAX_PACKET_SIZE)) { + ep_ref[0].sc |= EP_SEND_ZLP; + } + + if (purb->device_request.wValue == + USB_DESCRIPTOR_TYPE_DEVICE) { + if (le16_to_cpu (purb->device_request.wLength) + > purb->actual_length) { + /* Send EP0_MAX_PACKET_SIZE bytes + * unless correct size requested. + */ + if (purb->actual_length > epi->tx_packetSize) { + purb->actual_length = epi->tx_packetSize; + } + } + } + mpc8xx_udc_ep_tx (epi); + + } else { + /* Corrupt SETUP packet? */ + ERR ("Zero length data or SETUP with DATA-IN phase ?\n"); + return 1; + } + } + return 0; +} + +/* mpc8xx_udc_init_tx + * + * Setup some basic parameters for a TX transaction + */ +static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi, + struct urb *tx_urb) +{ + epi->sent = 0; + epi->last = 0; + epi->tx_urb = tx_urb; +} + +/* mpc8xx_udc_ep0_rx + * + * Receive ep0/control USB data. Parse and possibly send a response. + */ +static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp) +{ + if (rx_cbdp->cbd_sc & RX_BD_PID_SETUP) { + + /* Unconditionally accept SETUP packets */ + if (mpc8xx_udc_ep0_rx_setup (rx_cbdp)) { + mpc8xx_udc_stall (0); + } + + } else { + + mpc8xx_udc_clear_rxbd (rx_cbdp); + + if ((rx_cbdp->cbd_datlen - 2)) { + /* SETUP with a DATA phase + * outside of SETUP packet. + * Reply with STALL. + */ + mpc8xx_udc_stall (0); + } + } +} + +/* mpc8xx_udc_epn_rx + * + * Receive some data from cbd into USB system urb data abstraction + * Upper layers should NAK if there is insufficient RX data space + */ +static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp) +{ + struct usb_endpoint_instance *epi = 0; + struct urb *urb = 0; + unsigned int x = 0; + + if (epid >= MAX_ENDPOINTS || !rx_cbdp->cbd_datlen) { + return 0; + } + + /* USB 2.0 PDF section 8.6.4 + * Discard data with invalid PID it is a resend. + */ + if (ep_ref[epid].pid != (rx_cbdp->cbd_sc & 0xC0)) { + return 1; + } + TOGGLE_RX_PID (ep_ref[epid].pid); + + epi = &udc_device->bus->endpoint_array[epid]; + urb = epi->rcv_urb; + + for (; x < (rx_cbdp->cbd_datlen - 2); x++) { + *((unsigned char *) (urb->buffer + urb->actual_length + x)) = + *((unsigned char *) (rx_cbdp->cbd_bufaddr + x)); + } + + if (x) { + usbd_rcv_complete (epi, x, 0); + if (ep_ref[epid].urb->status == RECV_ERROR) { + DBG ("RX error unset NAK\n"); + udc_unset_nak (epid); + } + } + return x; +} + +/* mpc8xx_udc_clock_init + * + * Obtain a clock reference for Full Speed Signaling + */ +static void mpc8xx_udc_clock_init (volatile immap_t * immr, + volatile cpm8xx_t * cp) +{ + +#if defined(CONFIG_SYS_USB_EXTC_CLK) + + /* This has been tested with a 48MHz crystal on CLK6 */ + switch (CONFIG_SYS_USB_EXTC_CLK) { + case 1: + immr->im_ioport.iop_papar |= 0x0100; + immr->im_ioport.iop_padir &= ~0x0100; + cp->cp_sicr |= 0x24; + break; + case 2: + immr->im_ioport.iop_papar |= 0x0200; + immr->im_ioport.iop_padir &= ~0x0200; + cp->cp_sicr |= 0x2D; + break; + case 3: + immr->im_ioport.iop_papar |= 0x0400; + immr->im_ioport.iop_padir &= ~0x0400; + cp->cp_sicr |= 0x36; + break; + case 4: + immr->im_ioport.iop_papar |= 0x0800; + immr->im_ioport.iop_padir &= ~0x0800; + cp->cp_sicr |= 0x3F; + break; + default: + udc_state = STATE_ERROR; + break; + } + +#elif defined(CONFIG_SYS_USB_BRGCLK) + + /* This has been tested with brgclk == 50MHz */ + int divisor = 0; + + if (gd->cpu_clk < 48000000L) { + ERR ("brgclk is too slow for full-speed USB!\n"); + udc_state = STATE_ERROR; + return; + } + + /* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48MHz) + * but, can /probably/ live with close-ish alternative rates. + */ + divisor = (gd->cpu_clk / 48000000L) - 1; + cp->cp_sicr &= ~0x0000003F; + + switch (CONFIG_SYS_USB_BRGCLK) { + case 1: + cp->cp_brgc1 |= (divisor | CPM_BRG_EN); + cp->cp_sicr &= ~0x2F; + break; + case 2: + cp->cp_brgc2 |= (divisor | CPM_BRG_EN); + cp->cp_sicr |= 0x00000009; + break; + case 3: + cp->cp_brgc3 |= (divisor | CPM_BRG_EN); + cp->cp_sicr |= 0x00000012; + break; + case 4: + cp->cp_brgc4 = (divisor | CPM_BRG_EN); + cp->cp_sicr |= 0x0000001B; + break; + default: + udc_state = STATE_ERROR; + break; + } + +#else +#error "CONFIG_SYS_USB_EXTC_CLK or CONFIG_SYS_USB_BRGCLK must be defined" +#endif + +} + +/* mpc8xx_udc_cbd_attach + * + * attach a cbd to and endpoint + */ +static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size) +{ + + if (!tx_cbd[ep] || !rx_cbd[ep] || ep >= MAX_ENDPOINTS) { + udc_state = STATE_ERROR; + return; + } + + if (tx_size > USB_MAX_PKT || rx_size > USB_MAX_PKT || + (!tx_size && !rx_size)) { + udc_state = STATE_ERROR; + return; + } + + /* Attach CBD to appropiate Parameter RAM Endpoint data structure */ + if (rx_size) { + endpoints[ep]->rbase = (u32) rx_cbd[rx_ct]; + endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; + rx_ct++; + + if (!ep) { + + endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; + rx_cbd[rx_ct]->cbd_sc |= RX_BD_W; + rx_ct++; + + } else { + rx_ct += 2; + endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct]; + rx_cbd[rx_ct]->cbd_sc |= RX_BD_W; + rx_ct++; + } + + /* Where we expect to RX data on this endpoint */ + ep_ref[ep].prx = rx_cbd[rx_ct - 1]; + } else { + + ep_ref[ep].prx = 0; + endpoints[ep]->rbase = 0; + endpoints[ep]->rbptr = 0; + } + + if (tx_size) { + endpoints[ep]->tbase = (u32) tx_cbd[tx_ct]; + endpoints[ep]->tbptr = (u32) tx_cbd[tx_ct]; + tx_ct++; + } else { + endpoints[ep]->tbase = 0; + endpoints[ep]->tbptr = 0; + } + + endpoints[ep]->tstate = 0; + endpoints[ep]->tbcnt = 0; + endpoints[ep]->mrblr = EP_MAX_PKT; + endpoints[ep]->rfcr = 0x18; + endpoints[ep]->tfcr = 0x18; + ep_ref[ep].sc |= EP_ATTACHED; + + DBG ("ep %d rbase 0x%08x rbptr 0x%08x tbase 0x%08x tbptr 0x%08x prx = %p\n", + ep, endpoints[ep]->rbase, endpoints[ep]->rbptr, + endpoints[ep]->tbase, endpoints[ep]->tbptr, + ep_ref[ep].prx); + + return; +} + +/* mpc8xx_udc_cbd_init + * + * Allocate space for a cbd and allocate TX/RX data space + */ +static void mpc8xx_udc_cbd_init (void) +{ + int i = 0; + + for (; i < TX_RING_SIZE; i++) { + tx_cbd[i] = (cbd_t *) + mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int)); + } + + for (i = 0; i < RX_RING_SIZE; i++) { + rx_cbd[i] = (cbd_t *) + mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int)); + } + + for (i = 0; i < TX_RING_SIZE; i++) { + tx_cbd[i]->cbd_bufaddr = + mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int)); + + tx_cbd[i]->cbd_sc = (TX_BD_I | TX_BD_W); + tx_cbd[i]->cbd_datlen = 0x0000; + } + + + for (i = 0; i < RX_RING_SIZE; i++) { + rx_cbd[i]->cbd_bufaddr = + mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int)); + rx_cbd[i]->cbd_sc = (RX_BD_I | RX_BD_E); + rx_cbd[i]->cbd_datlen = 0x0000; + + } + + return; +} + +/* mpc8xx_udc_endpoint_init + * + * Attach an endpoint to some dpram + */ +static void mpc8xx_udc_endpoint_init (void) +{ + int i = 0; + + for (; i < MAX_ENDPOINTS; i++) { + endpoints[i] = (usb_epb_t *) + mpc8xx_udc_alloc (sizeof (usb_epb_t), 32); + } +} + +/* mpc8xx_udc_alloc + * + * Grab the address of some dpram + */ +static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment) +{ + u32 retaddr = address_base; + + while (retaddr % alignment) { + retaddr++; + } + address_base += data_size; + + return retaddr; +} -- cgit v1.2.1