From 5f266c60bf036a4adad2b69c1597ff49104959da Mon Sep 17 00:00:00 2001 From: Purna Chandra Mandal Date: Thu, 28 Jan 2016 15:30:12 +0530 Subject: drivers: pinctrl: Add pinctrl driver for Microchip PIC32. In PIC32 pin-controller is a combined gpio-controller, pin-mux and pin-config module. Remappable peripherals are assigned pins through per-pin based muxing logic. And pin configuration are performed on specific port registers which are shared along with gpio controller. Note, non-remappable peripherals have default pins assigned thus require no muxing. Signed-off-by: Purna Chandra Mandal Reviewed-by: Tom Rini Reviewed-by: Daniel Schwierzeck Reviewed-by: Simon Glass --- drivers/pinctrl/pinctrl_pic32.c | 363 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 363 insertions(+) create mode 100644 drivers/pinctrl/pinctrl_pic32.c (limited to 'drivers/pinctrl/pinctrl_pic32.c') diff --git a/drivers/pinctrl/pinctrl_pic32.c b/drivers/pinctrl/pinctrl_pic32.c new file mode 100644 index 0000000000..5cf97ecec8 --- /dev/null +++ b/drivers/pinctrl/pinctrl_pic32.c @@ -0,0 +1,363 @@ +/* + * Pinctrl driver for Microchip PIC32 SoCs + * Copyright (c) 2015 Microchip Technology Inc. + * Written by Purna Chandra Mandal + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* PIC32 has 10 peripheral ports with 16 pins each. + * Ports are marked PORTA-PORTK or PORT0-PORT9. + */ +enum { + PIC32_PORT_A = 0, + PIC32_PORT_B = 1, + PIC32_PORT_C = 2, + PIC32_PORT_D = 3, + PIC32_PORT_E = 4, + PIC32_PORT_F = 5, + PIC32_PORT_G = 6, + PIC32_PORT_H = 7, + PIC32_PORT_J = 8, /* no PORT_I */ + PIC32_PORT_K = 9, + PIC32_PINS_PER_PORT = 16, +}; + +#define PIN_CONFIG_PIC32_DIGITAL (PIN_CONFIG_END + 1) +#define PIN_CONFIG_PIC32_ANALOG (PIN_CONFIG_END + 2) + +/* pin configuration descriptor */ +struct pic32_pin_config { + u16 port; /* port number */ + u16 pin; /* pin number in the port */ + u32 config; /* one of PIN_CONFIG_* */ +}; +#define PIN_CONFIG(_prt, _pin, _cfg) \ + {.port = (_prt), .pin = (_pin), .config = (_cfg), } + +/* In PIC32 muxing is performed at pin-level through two + * different set of registers - one set for input functions, + * and other for output functions. + * Pin configuration is handled through port register. + */ +/* Port control registers */ +struct pic32_reg_port { + struct pic32_reg_atomic ansel; + struct pic32_reg_atomic tris; + struct pic32_reg_atomic port; + struct pic32_reg_atomic lat; + struct pic32_reg_atomic odc; + struct pic32_reg_atomic cnpu; + struct pic32_reg_atomic cnpd; + struct pic32_reg_atomic cncon; + struct pic32_reg_atomic unused[8]; +}; + +/* Input function mux registers */ +struct pic32_reg_in_mux { + u32 unused0; + u32 int1[4]; + u32 unused1; + u32 t2ck[8]; + u32 ic1[9]; + u32 unused2; + u32 ocfar; + u32 unused3; + u32 u1rx; + u32 u1cts; + u32 u2rx; + u32 u2cts; + u32 u3rx; + u32 u3cts; + u32 u4rx; + u32 u4cts; + u32 u5rx; + u32 u5cts; + u32 u6rx; + u32 u6cts; + u32 unused4; + u32 sdi1; + u32 ss1; + u32 unused5; + u32 sdi2; + u32 ss2; + u32 unused6; + u32 sdi3; + u32 ss3; + u32 unused7; + u32 sdi4; + u32 ss4; + u32 unused8; + u32 sdi5; + u32 ss5; + u32 unused9; + u32 sdi6; + u32 ss6; + u32 c1rx; + u32 c2rx; + u32 refclki1; + u32 refclki2; + u32 refclki3; + u32 refclki4; +}; + +/* output mux register offset */ +#define PPS_OUT(__port, __pin) \ + (((__port) * PIC32_PINS_PER_PORT + (__pin)) << 2) + + +struct pic32_pinctrl_priv { + struct pic32_reg_in_mux *mux_in; /* mux input function */ + struct pic32_reg_port *pinconf; /* pin configuration*/ + void __iomem *mux_out; /* mux output function */ +}; + +enum { + PERIPH_ID_UART1, + PERIPH_ID_UART2, + PERIPH_ID_ETH, + PERIPH_ID_USB, + PERIPH_ID_SDHCI, + PERIPH_ID_I2C1, + PERIPH_ID_I2C2, + PERIPH_ID_SPI1, + PERIPH_ID_SPI2, + PERIPH_ID_SQI, +}; + +static int pic32_pinconfig_one(struct pic32_pinctrl_priv *priv, + u32 port_nr, u32 pin, u32 param) +{ + struct pic32_reg_port *port; + + port = &priv->pinconf[port_nr]; + switch (param) { + case PIN_CONFIG_PIC32_DIGITAL: + writel(BIT(pin), &port->ansel.clr); + break; + case PIN_CONFIG_PIC32_ANALOG: + writel(BIT(pin), &port->ansel.set); + break; + case PIN_CONFIG_INPUT_ENABLE: + writel(BIT(pin), &port->tris.set); + break; + case PIN_CONFIG_OUTPUT: + writel(BIT(pin), &port->tris.clr); + break; + case PIN_CONFIG_BIAS_PULL_UP: + writel(BIT(pin), &port->cnpu.set); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + writel(BIT(pin), &port->cnpd.set); + break; + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + writel(BIT(pin), &port->odc.set); + break; + default: + break; + } + + return 0; +} + +static int pic32_pinconfig_set(struct pic32_pinctrl_priv *priv, + const struct pic32_pin_config *list, int count) +{ + int i; + + for (i = 0 ; i < count; i++) + pic32_pinconfig_one(priv, list[i].port, + list[i].pin, list[i].config); + + return 0; +} + +static void pic32_eth_pin_config(struct udevice *dev) +{ + struct pic32_pinctrl_priv *priv = dev_get_priv(dev); + const struct pic32_pin_config configs[] = { + /* EMDC - D11 */ + PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_PIC32_DIGITAL), + PIN_CONFIG(PIC32_PORT_D, 11, PIN_CONFIG_OUTPUT), + /* ETXEN */ + PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_PIC32_DIGITAL), + PIN_CONFIG(PIC32_PORT_D, 6, PIN_CONFIG_OUTPUT), + /* ECRSDV */ + PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_PIC32_DIGITAL), + PIN_CONFIG(PIC32_PORT_H, 13, PIN_CONFIG_INPUT_ENABLE), + /* ERXD0 */ + PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_PIC32_DIGITAL), + PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_INPUT_ENABLE), + PIN_CONFIG(PIC32_PORT_H, 8, PIN_CONFIG_BIAS_PULL_DOWN), + /* ERXD1 */ + PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_PIC32_DIGITAL), + PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_INPUT_ENABLE), + PIN_CONFIG(PIC32_PORT_H, 5, PIN_CONFIG_BIAS_PULL_DOWN), + /* EREFCLK */ + PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_PIC32_DIGITAL), + PIN_CONFIG(PIC32_PORT_J, 11, PIN_CONFIG_INPUT_ENABLE), + /* ETXD1 */ + PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_PIC32_DIGITAL), + PIN_CONFIG(PIC32_PORT_J, 9, PIN_CONFIG_OUTPUT), + /* ETXD0 */ + PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_PIC32_DIGITAL), + PIN_CONFIG(PIC32_PORT_J, 8, PIN_CONFIG_OUTPUT), + /* EMDIO */ + PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_PIC32_DIGITAL), + PIN_CONFIG(PIC32_PORT_J, 1, PIN_CONFIG_INPUT_ENABLE), + /* ERXERR */ + PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_PIC32_DIGITAL), + PIN_CONFIG(PIC32_PORT_F, 3, PIN_CONFIG_INPUT_ENABLE), + }; + + pic32_pinconfig_set(priv, configs, ARRAY_SIZE(configs)); +} + +static int pic32_pinctrl_request(struct udevice *dev, int func, int flags) +{ + struct pic32_pinctrl_priv *priv = dev_get_priv(dev); + + switch (func) { + case PERIPH_ID_UART2: + /* PPS for U2 RX/TX */ + writel(0x02, priv->mux_out + PPS_OUT(PIC32_PORT_G, 9)); + writel(0x05, &priv->mux_in->u2rx); /* B0 */ + /* set digital mode */ + pic32_pinconfig_one(priv, PIC32_PORT_G, 9, + PIN_CONFIG_PIC32_DIGITAL); + pic32_pinconfig_one(priv, PIC32_PORT_B, 0, + PIN_CONFIG_PIC32_DIGITAL); + break; + case PERIPH_ID_ETH: + pic32_eth_pin_config(dev); + break; + default: + debug("%s: unknown-unhandled case\n", __func__); + break; + } + + return 0; +} + +static int pic32_pinctrl_get_periph_id(struct udevice *dev, + struct udevice *periph) +{ + int ret; + u32 cell[2]; + + ret = fdtdec_get_int_array(gd->fdt_blob, periph->of_offset, + "interrupts", cell, ARRAY_SIZE(cell)); + if (ret < 0) + return -EINVAL; + + /* interrupt number */ + switch (cell[0]) { + case 112 ... 114: + return PERIPH_ID_UART1; + case 145 ... 147: + return PERIPH_ID_UART2; + case 109 ... 111: + return PERIPH_ID_SPI1; + case 142 ... 144: + return PERIPH_ID_SPI2; + case 115 ... 117: + return PERIPH_ID_I2C1; + case 148 ... 150: + return PERIPH_ID_I2C2; + case 132 ... 133: + return PERIPH_ID_USB; + case 169: + return PERIPH_ID_SQI; + case 191: + return PERIPH_ID_SDHCI; + case 153: + return PERIPH_ID_ETH; + default: + break; + } + + return -ENOENT; +} + +static int pic32_pinctrl_set_state_simple(struct udevice *dev, + struct udevice *periph) +{ + int func; + + debug("%s: periph %s\n", __func__, periph->name); + func = pic32_pinctrl_get_periph_id(dev, periph); + if (func < 0) + return func; + return pic32_pinctrl_request(dev, func, 0); +} + +static struct pinctrl_ops pic32_pinctrl_ops = { + .set_state_simple = pic32_pinctrl_set_state_simple, + .request = pic32_pinctrl_request, + .get_periph_id = pic32_pinctrl_get_periph_id, +}; + +static int pic32_pinctrl_probe(struct udevice *dev) +{ + struct pic32_pinctrl_priv *priv = dev_get_priv(dev); + struct fdt_resource res; + void *fdt = (void *)gd->fdt_blob; + int node = dev->of_offset; + int ret; + + ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", + "ppsin", &res); + if (ret < 0) { + printf("pinctrl: resource \"ppsin\" not found\n"); + return ret; + } + priv->mux_in = ioremap(res.start, fdt_resource_size(&res)); + + ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", + "ppsout", &res); + if (ret < 0) { + printf("pinctrl: resource \"ppsout\" not found\n"); + return ret; + } + priv->mux_out = ioremap(res.start, fdt_resource_size(&res)); + + ret = fdt_get_named_resource(fdt, node, "reg", "reg-names", + "port", &res); + if (ret < 0) { + printf("pinctrl: resource \"port\" not found\n"); + return ret; + } + priv->pinconf = ioremap(res.start, fdt_resource_size(&res)); + + return 0; +} + +static int pic32_pinctrl_bind(struct udevice *dev) +{ + /* scan child GPIO banks */ + return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false); +} + +static const struct udevice_id pic32_pinctrl_ids[] = { + { .compatible = "microchip,pic32mzda-pinctrl" }, + { } +}; + +U_BOOT_DRIVER(pinctrl_pic32) = { + .name = "pinctrl_pic32", + .id = UCLASS_PINCTRL, + .of_match = pic32_pinctrl_ids, + .ops = &pic32_pinctrl_ops, + .probe = pic32_pinctrl_probe, + .bind = pic32_pinctrl_bind, + .priv_auto_alloc_size = sizeof(struct pic32_pinctrl_priv), +}; -- cgit v1.2.1