From ff063ed4808e4ead3021eaf53ee4fdb80c9e91f8 Mon Sep 17 00:00:00 2001 From: Jagannadha Sutradharudu Teki Date: Sat, 11 Jan 2014 16:50:45 +0530 Subject: sf: Discover read dummy_byte Discovered the read dummy_byte based on the configured read command. Signed-off-by: Jagannadha Sutradharudu Teki --- drivers/mtd/spi/sf_internal.h | 2 ++ drivers/mtd/spi/sf_ops.c | 16 +++++++++------- drivers/mtd/spi/sf_probe.c | 19 +++++++++++++++++++ 3 files changed, 30 insertions(+), 7 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 7be02925c8..a9f5a8111b 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -10,6 +10,8 @@ #ifndef _SF_INTERNAL_H_ #define _SF_INTERNAL_H_ +#define SPI_FLASH_3B_ADDR_LEN 3 +#define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN) #define SPI_FLASH_16MB_BOUN 0x1000000 /* CFI Manufacture ID's */ diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index 827f71912d..6adee325cb 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -9,6 +9,7 @@ */ #include +#include #include #include #include @@ -216,7 +217,7 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) { u32 erase_size; - u8 cmd[4]; + u8 cmd[SPI_FLASH_CMD_LEN]; int ret = -1; erase_size = flash->erase_size; @@ -255,7 +256,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, { unsigned long byte_addr, page_size; size_t chunk_len, actual; - u8 cmd[4]; + u8 cmd[SPI_FLASH_CMD_LEN]; int ret = -1; page_size = flash->page_size; @@ -317,7 +318,7 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, size_t len, void *data) { - u8 cmd[5], bank_sel = 0; + u8 *cmd, cmdsz, bank_sel = 0; u32 remain_len, read_len; int ret = -1; @@ -335,9 +336,11 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, return 0; } - cmd[0] = flash->read_cmd; - cmd[4] = 0x00; + cmdsz = SPI_FLASH_CMD_LEN + flash->dummy_byte; + cmd = malloc(cmdsz); + memset(cmd, 0, cmdsz); + cmd[0] = flash->read_cmd; while (len) { #ifdef CONFIG_SPI_FLASH_BAR bank_sel = offset / SPI_FLASH_16MB_BOUN; @@ -356,8 +359,7 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, spi_flash_addr(offset, cmd); - ret = spi_flash_read_common(flash, cmd, sizeof(cmd), - data, read_len); + ret = spi_flash_read_common(flash, cmd, cmdsz, data, read_len); if (ret < 0) { debug("SF: read failed\n"); break; diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index a049e729a1..8bd06eea62 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -140,6 +140,25 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, } } + /* Read dummy_byte: dummy byte is determined based on the + * dummy cycles of a particular command. + * Fast commands - dummy_byte = dummy_cycles/8 + * I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8 + * For I/O commands except cmd[0] everything goes on no.of lines + * based on particular command but incase of fast commands except + * data all go on single line irrespective of command. + */ + switch (flash->read_cmd) { + case CMD_READ_QUAD_IO_FAST: + flash->dummy_byte = 2; + break; + case CMD_READ_ARRAY_SLOW: + flash->dummy_byte = 0; + break; + default: + flash->dummy_byte = 1; + } + /* Poll cmd seclection */ flash->poll_cmd = CMD_READ_STATUS; #ifdef CONFIG_SPI_FLASH_STMICRO -- cgit v1.2.1