From 68fc449033732e7eb2aa022f9ef1b292f6871b8c Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 2 Feb 2016 11:54:35 +0100 Subject: mtd, ubi: set free_count to zero before walking through erase list Set free_count to zero before walking through ai->erase list in wl_init(). As U-Boot has no workqueue/threads, it immediately calls erase_worker(), which increase for each erased block free_count. Without this patch, free_count gets after this initialized to zero in wl_init(), so the free_count variable always has the maybe wrong value 0. Detected this behaviour on the dxr2 board, where the UBI fastmap gets not written when attaching/dettaching on an empty NAND. It drops instead the error message: could not find any anchor PEB With this patch, fastmap gets written on dettach. Signed-off-by: Heiko Schocher Reviewed-by: Boris Brezillon --- drivers/mtd/ubi/wl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 507b091720..e823ca56f2 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -1528,6 +1528,7 @@ int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai) INIT_LIST_HEAD(&ubi->pq[i]); ubi->pq_head = 0; + ubi->free_count = 0; list_for_each_entry_safe(aeb, tmp, &ai->erase, u.list) { cond_resched(); @@ -1546,7 +1547,6 @@ int ubi_wl_init(struct ubi_device *ubi, struct ubi_attach_info *ai) found_pebs++; } - ubi->free_count = 0; list_for_each_entry(aeb, &ai->free, u.list) { cond_resched(); -- cgit v1.2.1