From a187559e3d586891c917279044c5386d1b2adc6e Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Fri, 5 Feb 2016 19:30:11 -0800 Subject: Use correct spelling of "U-Boot" Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng Reviewed-by: Heiko Schocher Reviewed-by: Simon Glass Reviewed-by: Minkyu Kang --- drivers/mtd/nand/fsl_ifc_spl.c | 2 +- drivers/mtd/nand/lpc32xx_nand_slc.c | 2 +- drivers/mtd/nand/mxc_nand_spl.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/mtd/nand') diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c index fccbfb5129..cbeb74a5bb 100644 --- a/drivers/mtd/nand/fsl_ifc_spl.c +++ b/drivers/mtd/nand/fsl_ifc_spl.c @@ -236,7 +236,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) /* * Main entrypoint for NAND Boot. It's necessary that SDRAM is already - * configured and available since this code loads the main U-boot image + * configured and available since this code loads the main U-Boot image * from NAND into SDRAM and starts from there. */ void nand_boot(void) diff --git a/drivers/mtd/nand/lpc32xx_nand_slc.c b/drivers/mtd/nand/lpc32xx_nand_slc.c index 2e5f139606..4e1be36654 100644 --- a/drivers/mtd/nand/lpc32xx_nand_slc.c +++ b/drivers/mtd/nand/lpc32xx_nand_slc.c @@ -516,7 +516,7 @@ static int lpc32xx_write_page_hwecc(struct mtd_info *mtd, /* * LPC32xx has only one SLC NAND controller, don't utilize * CONFIG_SYS_NAND_SELF_INIT to be able to reuse this function - * both in SPL NAND and U-boot images. + * both in SPL NAND and U-Boot images. */ int board_nand_init(struct nand_chip *lpc32xx_chip) { diff --git a/drivers/mtd/nand/mxc_nand_spl.c b/drivers/mtd/nand/mxc_nand_spl.c index 69b736a848..6ac2c96eeb 100644 --- a/drivers/mtd/nand/mxc_nand_spl.c +++ b/drivers/mtd/nand/mxc_nand_spl.c @@ -337,7 +337,7 @@ void nand_boot(void) if (!nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) { - /* Copy from NAND successful, start U-boot */ + /* Copy from NAND successful, start U-Boot */ uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; uboot(); } else { -- cgit v1.2.1