From 3a6383207be3f71b39004e64464a6e99290b16fa Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 23 Apr 2012 02:36:25 +0000 Subject: mmc: sdhci: add the quirk for broken r1b response When response type is R1b, mask value is added the SDHCI_INT_DAT_END. but in while(), didn't check that flag. So sdhci controller didn't work fine. CMD6 didn't always complete. So add the quirks for broken r1b response and add the timeout value to prevent the infinite loop. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Acked-by: Lei Wen --- drivers/mmc/sdhci.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/mmc/sdhci.c') diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index fc904b5308..7790a1e8da 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -128,6 +128,7 @@ int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, int trans_bytes = 0, is_aligned = 1; u32 mask, flags, mode; unsigned int timeout, start_addr = 0; + unsigned int retry = 10000; /* Wait max 10 ms */ timeout = 10; @@ -210,8 +211,19 @@ int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, stat = sdhci_readl(host, SDHCI_INT_STATUS); if (stat & SDHCI_INT_ERROR) break; + if (--retry == 0) + break; } while ((stat & mask) != mask); + if (retry == 0) { + if (host->quirks & SDHCI_QUIRK_BROKEN_R1B) + return 0; + else { + printf("Timeout for status update!\n"); + return TIMEOUT; + } + } + if ((stat & (SDHCI_INT_ERROR | mask)) == mask) { sdhci_cmd_done(host, cmd); sdhci_writel(host, mask, SDHCI_INT_STATUS); -- cgit v1.2.1