From 7282672d298905088fb3c7c0a049d7d7d31cb8b4 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 17 Jan 2016 16:11:09 -0700 Subject: dm: pci: Convert bios_emu to use the driver model PCI API At present this BIOS emulator uses a bus/device/function number. Change it to use a device if CONFIG_DM_PCI is enabled. Signed-off-by: Simon Glass Reviewed-by: Bin Meng --- drivers/bios_emulator/atibios.c | 109 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 105 insertions(+), 4 deletions(-) (limited to 'drivers/bios_emulator/atibios.c') diff --git a/drivers/bios_emulator/atibios.c b/drivers/bios_emulator/atibios.c index dec6230ad5..77172467b2 100644 --- a/drivers/bios_emulator/atibios.c +++ b/drivers/bios_emulator/atibios.c @@ -226,11 +226,19 @@ This function executes the BIOS POST code on the controller. We assume that at this stage the controller has its I/O and memory space enabled and that all other controllers are in a disabled state. ****************************************************************************/ +#ifdef CONFIG_DM_PCI +static void PCI_doBIOSPOST(struct udevice *pcidev, BE_VGAInfo *vga_info, + int vesa_mode, struct vbe_mode_info *mode_info) +#else static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info, int vesa_mode, struct vbe_mode_info *mode_info) +#endif { RMREGS regs; RMSREGS sregs; +#ifdef CONFIG_DM_PCI + pci_dev_t bdf; +#endif /* Determine the value to store in AX for BIOS POST. Per the PCI specs, AH must contain the bus and AL must contain the devfn, encoded as @@ -238,9 +246,14 @@ static void PCI_doBIOSPOST(pci_dev_t pcidev, BE_VGAInfo *vga_info, */ memset(®s, 0, sizeof(regs)); memset(&sregs, 0, sizeof(sregs)); +#ifdef CONFIG_DM_PCI + bdf = dm_pci_get_bdf(pcidev); + regs.x.ax = (int)PCI_BUS(bdf) << 8 | + (int)PCI_DEV(bdf) << 3 | (int)PCI_FUNC(bdf); +#else regs.x.ax = ((int)PCI_BUS(pcidev) << 8) | ((int)PCI_DEV(pcidev) << 3) | (int)PCI_FUNC(pcidev); - +#endif /*Setup the X86 emulator for the VGA BIOS*/ BE_setVGA(vga_info); @@ -281,15 +294,28 @@ NOTE: This function leaves the original memory aperture disabled by leaving it programmed to all 1's. It must be restored to the correct value later. ****************************************************************************/ +#ifdef CONFIG_DM_PCI +static u32 PCI_findBIOSAddr(struct udevice *pcidev, int *bar) +#else static u32 PCI_findBIOSAddr(pci_dev_t pcidev, int *bar) +#endif { u32 base, size; for (*bar = 0x10; *bar <= 0x14; (*bar) += 4) { +#ifdef CONFIG_DM_PCI + dm_pci_read_config32(pcidev, *bar, &base); +#else pci_read_config_dword(pcidev, *bar, &base); +#endif if (!(base & 0x1)) { +#ifdef CONFIG_DM_PCI + dm_pci_write_config32(pcidev, *bar, 0xFFFFFFFF); + dm_pci_read_config32(pcidev, *bar, &size); +#else pci_write_config_dword(pcidev, *bar, 0xFFFFFFFF); pci_read_config_dword(pcidev, *bar, &size); +#endif size = ~(size & ~0xFF) + 1; if (size >= MAX_BIOSLEN) return base & ~0xFF; @@ -312,11 +338,19 @@ necessary). Anyway to fix this we change all I/O mapped base registers and chop off the top bits. ****************************************************************************/ +#ifdef CONFIG_DM_PCI +static void PCI_fixupIObase(struct udevice *pcidev, int reg, u32 *base) +#else static void PCI_fixupIObase(pci_dev_t pcidev, int reg, u32 * base) +#endif { if ((*base & 0x1) && (*base > 0xFFFE)) { *base &= 0xFFFF; +#ifdef CONFIG_DM_PCI + dm_pci_write_config32(pcidev, reg, *base); +#else pci_write_config_dword(pcidev, reg, *base); +#endif } } @@ -331,18 +365,30 @@ Pointers to the mapped BIOS image REMARKS: Maps a pointer to the BIOS image on the graphics card on the PCI bus. ****************************************************************************/ +#ifdef CONFIG_DM_PCI +void *PCI_mapBIOSImage(struct udevice *pcidev) +#else void *PCI_mapBIOSImage(pci_dev_t pcidev) +#endif { u32 BIOSImageBus; int BIOSImageBAR; u8 *BIOSImage; /*Save PCI BAR registers that might get changed*/ +#ifdef CONFIG_DM_PCI + dm_pci_read_config32(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress); + dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10); + dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14); + dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18); + dm_pci_read_config32(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20); +#else pci_read_config_dword(pcidev, PCI_ROM_ADDRESS, &saveROMBaseAddress); pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &saveBaseAddress10); pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_1, &saveBaseAddress14); pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_2, &saveBaseAddress18); pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_4, &saveBaseAddress20); +#endif /*Fix up I/O base registers to less than 64K */ if(saveBaseAddress14 != 0) @@ -361,13 +407,21 @@ void *PCI_mapBIOSImage(pci_dev_t pcidev) return NULL; } +#ifdef CONFIG_DM_PCI + BIOSImage = dm_pci_bus_to_virt(pcidev, BIOSImageBus, + PCI_REGION_MEM, 0, MAP_NOCACHE); + + /*Change the PCI BAR registers to map it onto the bus.*/ + dm_pci_write_config32(pcidev, BIOSImageBAR, 0); + dm_pci_write_config32(pcidev, PCI_ROM_ADDRESS, BIOSImageBus | 0x1); +#else BIOSImage = pci_bus_to_virt(pcidev, BIOSImageBus, PCI_REGION_MEM, 0, MAP_NOCACHE); /*Change the PCI BAR registers to map it onto the bus.*/ pci_write_config_dword(pcidev, BIOSImageBAR, 0); pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, BIOSImageBus | 0x1); - +#endif udelay(1); /*Check that the BIOS image is valid. If not fail, or return the @@ -387,6 +441,16 @@ pcidev - PCI device info for the video card on the bus REMARKS: Unmaps the BIOS image for the device and restores framebuffer mappings ****************************************************************************/ +#ifdef CONFIG_DM_PCI +void PCI_unmapBIOSImage(struct udevice *pcidev, void *BIOSImage) +{ + dm_pci_write_config32(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress); + dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_0, saveBaseAddress10); + dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_1, saveBaseAddress14); + dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18); + dm_pci_write_config32(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20); +} +#else void PCI_unmapBIOSImage(pci_dev_t pcidev, void *BIOSImage) { pci_write_config_dword(pcidev, PCI_ROM_ADDRESS, saveROMBaseAddress); @@ -395,6 +459,7 @@ void PCI_unmapBIOSImage(pci_dev_t pcidev, void *BIOSImage) pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_2, saveBaseAddress18); pci_write_config_dword(pcidev, PCI_BASE_ADDRESS_4, saveBaseAddress20); } +#endif /**************************************************************************** PARAMETERS: @@ -408,13 +473,22 @@ REMARKS: Loads and POST's the display controllers BIOS, directly from the BIOS image we can extract over the PCI bus. ****************************************************************************/ +#ifdef CONFIG_DM_PCI +static int PCI_postController(struct udevice *pcidev, uchar *bios_rom, + int bios_len, BE_VGAInfo *vga_info, + int vesa_mode, struct vbe_mode_info *mode_info) +#else static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len, BE_VGAInfo *vga_info, int vesa_mode, struct vbe_mode_info *mode_info) +#endif { u32 bios_image_len; uchar *mapped_bios; uchar *copy_of_bios; +#ifdef CONFIG_DM_PCI + pci_dev_t bdf; +#endif if (bios_rom) { copy_of_bios = bios_rom; @@ -442,9 +516,16 @@ static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len, } /*Save information in vga_info structure*/ +#ifdef CONFIG_DM_PCI + bdf = dm_pci_get_bdf(pcidev); + vga_info->function = PCI_FUNC(bdf); + vga_info->device = PCI_DEV(bdf); + vga_info->bus = PCI_BUS(bdf); +#else vga_info->function = PCI_FUNC(pcidev); vga_info->device = PCI_DEV(pcidev); vga_info->bus = PCI_BUS(pcidev); +#endif vga_info->pcidev = pcidev; vga_info->BIOSImage = copy_of_bios; vga_info->BIOSImageLen = bios_image_len; @@ -462,13 +543,22 @@ static int PCI_postController(pci_dev_t pcidev, uchar *bios_rom, int bios_len, return true; } +#ifdef CONFIG_DM_PCI +int biosemu_setup(struct udevice *pcidev, BE_VGAInfo **vga_infop) +#else int biosemu_setup(pci_dev_t pcidev, BE_VGAInfo **vga_infop) +#endif { BE_VGAInfo *VGAInfo; +#ifdef CONFIG_DM_PCI + pci_dev_t bdf = dm_pci_get_bdf(pcidev); printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n", - PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev)); - + PCI_BUS(bdf), PCI_FUNC(bdf), PCI_DEV(bdf)); +#else + printf("videoboot: Booting PCI video card bus %d, function %d, device %d\n", + PCI_BUS(pcidev), PCI_FUNC(pcidev), PCI_DEV(pcidev)); +#endif /*Initialise the x86 BIOS emulator*/ if ((VGAInfo = malloc(sizeof(*VGAInfo))) == NULL) { printf("videoboot: Out of memory!\n"); @@ -486,9 +576,15 @@ void biosemu_set_interrupt_handler(int intnum, int (*int_func)(void)) X86EMU_setupIntrFunc(intnum, (X86EMU_intrFuncs)int_func); } +#ifdef CONFIG_DM_PCI +int biosemu_run(struct udevice *pcidev, uchar *bios_rom, int bios_len, + BE_VGAInfo *vga_info, int clean_up, int vesa_mode, + struct vbe_mode_info *mode_info) +#else int biosemu_run(pci_dev_t pcidev, uchar *bios_rom, int bios_len, BE_VGAInfo *vga_info, int clean_up, int vesa_mode, struct vbe_mode_info *mode_info) +#endif { /*Post all the display controller BIOS'es*/ if (!PCI_postController(pcidev, bios_rom, bios_len, vga_info, @@ -522,7 +618,12 @@ REMARKS: Boots the PCI/AGP video card on the bus using the Video ROM BIOS image and the X86 BIOS emulator module. ****************************************************************************/ +#ifdef CONFIG_DM_PCI +int BootVideoCardBIOS(struct udevice *pcidev, BE_VGAInfo **pVGAInfo, + int clean_up) +#else int BootVideoCardBIOS(pci_dev_t pcidev, BE_VGAInfo **pVGAInfo, int clean_up) +#endif { BE_VGAInfo *VGAInfo; int ret; -- cgit v1.2.1