From 89d48367edbc878f86db3008a4107331ef07f578 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 16 Feb 2011 11:14:33 -0800 Subject: Add USB host ethernet adapter support This adds support for using USB Ethernet dongles in host mode. This is just the framework - drivers will come later. A new config option called CONFIG_USB_HOST_ETHER can be defined in board config files to switch this on. The was originally written by NVIDIA and was cleaned up for release by the Chromium authors. Signed-off-by: Simon Glass --- doc/README.usb | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'doc/README.usb') diff --git a/doc/README.usb b/doc/README.usb index b3bcb91f40..9aa4f62ddf 100644 --- a/doc/README.usb +++ b/doc/README.usb @@ -28,7 +28,8 @@ USB Support for PIP405 and MIP405 (UHCI) The USB support is implemented on the base of the UHCI Host controller. -Currently supported are USB Hubs, USB Keyboards and USB Floppys. +Currently supported are USB Hubs, USB Keyboards, USB Floppys, USB +flash sticks and USB network adaptors. Tested with a TEAC Floppy TEAC FD-05PUB and Chicony KU-8933 Keyboard. How it works: @@ -78,3 +79,4 @@ CONFIG_USB_UHCI defines the lowlevel part.A lowlevel part must be defined if using CONFIG_CMD_USB CONFIG_USB_KEYBOARD enables the USB Keyboard CONFIG_USB_STORAGE enables the USB storage devices +CONFIG_USB_HOST_ETHER enables USB ethernet dongle support -- cgit v1.2.1