From d049cc7f71c0d875e8f5099d1ed23666a82b8f8e Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 27 Mar 2008 00:03:57 +0100 Subject: Coding style cleanup, update CHANGELOG Signed-off-by: Wolfgang Denk --- doc/README.sata | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'doc/README.sata') diff --git a/doc/README.sata b/doc/README.sata index 3e2c6e8313..168dc7f540 100644 --- a/doc/README.sata +++ b/doc/README.sata @@ -9,10 +9,10 @@ => sata info -SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#: 4QF01ZTN - Type: Hard Disk - Supports 48-bit addressing - Capacity: 305245.3 MB = 298.0 GB (625142448 x 512) +SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#: 4QF01ZTN + Type: Hard Disk + Supports 48-bit addressing + Capacity: 305245.3 MB = 298.0 GB (625142448 x 512) 1.1 How to save the kernel, filesystem, dtb to SATA hard disk with raw? @@ -48,16 +48,16 @@ SATA device 0: Model: ST3320620AS Firm: 3.AAD Ser#: 4QF01ZTN U-boot doesn't support ext2 write to hard disk, so you have to write the image to hard disk under Linux env, - before you load image from ext2 filesystem. + before you load image from ext2 filesystem. => ext2ls sata 0:1 / - 4096 . - 4096 .. - 16384 lost+found - 1352023 uImage.837x - 3646377 ramdisk.837x - 12288 mpc837xemds.dtb - 12 hello.txt + 4096 . + 4096 .. + 16384 lost+found + 1352023 uImage.837x + 3646377 ramdisk.837x + 12288 mpc837xemds.dtb + 12 hello.txt => ext2load sata 0:1 200000 /uImage.837x -- cgit v1.2.1