From 09a81ff740b29deea1e2ab08a3c2ac136c2e6219 Mon Sep 17 00:00:00 2001
From: Tanya Jiang <tanya.jiang@freescale.com>
Date: Thu, 3 Aug 2006 18:39:49 +0800
Subject: mpc83xx: Removed unused file resetvec.S for mpc83xx cpu

Removed unused file resetvec.S for mpc83xx cpu

Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
---
 cpu/mpc83xx/Makefile   | 2 +-
 cpu/mpc83xx/resetvec.S | 6 ------
 2 files changed, 1 insertion(+), 7 deletions(-)
 delete mode 100644 cpu/mpc83xx/resetvec.S

(limited to 'cpu')

diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index b2a6b3e9c5..1aa0005d4d 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(CPU).a
 
-START	= start.o resetvec.o
+START	= start.o
 COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
 	  i2c.o spd_sdram.o
 
diff --git a/cpu/mpc83xx/resetvec.S b/cpu/mpc83xx/resetvec.S
deleted file mode 100644
index 3dfcd0dcd5..0000000000
--- a/cpu/mpc83xx/resetvec.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .resetvec,"ax"
-#ifndef FIXME
-#if 0
-	b _start_e500
-#endif
-#endif
-- 
cgit v1.2.1


From f6eda7f80ccc13d658020268c507d7173cf2e8aa Mon Sep 17 00:00:00 2001
From: Dave Liu <daveliu@freescale.com>
Date: Wed, 25 Oct 2006 14:41:21 -0500
Subject: mpc83xx: Changed to unified mpx83xx names and added common 83xx
 changes

Incorporated the common unified variable names and the changes in preparation
for releasing mpc8360 patches.

Signed-off-by: Dave Liu <daveliu@freescale.com>
---
 cpu/mpc83xx/cpu.c       |   8 +-
 cpu/mpc83xx/i2c.c       |   8 +-
 cpu/mpc83xx/spd_sdram.c | 313 +++++++++++++++++++++++++++++-------------------
 cpu/mpc83xx/speed.c     |   6 +
 4 files changed, 204 insertions(+), 131 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 20bba6c66b..8d543d5c99 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -195,7 +195,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
 void dma_init(void)
 {
 	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
-	volatile dma8349_t *dma = &immap->dma;
+	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 status = swab32(dma->dmasr0);
 	volatile u32 dmamr0 = swab32(dma->dmamr0);
 
@@ -226,7 +226,7 @@ void dma_init(void)
 uint dma_check(void)
 {
 	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
-	volatile dma8349_t *dma = &immap->dma;
+	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 status = swab32(dma->dmasr0);
 	volatile u32 byte_count = swab32(dma->dmabcr0);
 
@@ -245,7 +245,7 @@ uint dma_check(void)
 int dma_xfer(void *dest, u32 count, void *src)
 {
 	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
-	volatile dma8349_t *dma = &immap->dma;
+	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 dmamr0;
 
 	/* initialize DMASARn, DMADAR and DMAABCRn */
diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c
index 70450f9e49..723feeb44f 100644
--- a/cpu/mpc83xx/i2c.c
+++ b/cpu/mpc83xx/i2c.c
@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2006 Freescale Semiconductor, Inc.
+ *
  * (C) Copyright 2003,Motorola Inc.
  * Xianghua Xiao <x.xiao@motorola.com>
  * Adapted for Motorola 85xx chip.
@@ -31,6 +33,8 @@
  *
  * 20050101: Eran Liberty (liberty@freescale.com)
  *           Initial file creating (porting from 85XX & 8260)
+ * 20060601: Dave Liu (daveliu@freescale.com)
+ *           Unified variable names for mpc83xx
  */
 
 #include <common.h>
@@ -42,7 +46,7 @@
 #include <asm/i2c.h>
 
 #if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X)
-i2c_t * mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET);
+i2c_t * mpc83xx_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET);
 #endif
 
 void
@@ -52,7 +56,7 @@ i2c_init(int speed, int slaveadd)
 	writeb(0x00 , &I2C->cr);
 
 	/* set clock */
-	writeb(0x3f, &I2C->fdr);
+	writeb(speed, &I2C->fdr);
 
 	/* set default filter */
 	writeb(0x10,&I2C->dfsrr);
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 48624feca6..153848d343 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2006 Freescale Semiconductor, Inc.
+ *
  * (C) Copyright 2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
@@ -28,6 +30,10 @@
  *
  * 20050101: Eran Liberty (liberty@freescale.com)
  *           Initial file creating (porting from 85XX & 8260)
+ * 20060601: Dave Liu (daveliu@freescale.com)
+ *           DDR ECC support
+ *           unify variable names for 83xx
+ *           code cleanup
  */
 
 #include <common.h>
@@ -39,7 +45,7 @@
 
 #ifdef CONFIG_SPD_EEPROM
 
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
 extern void dma_init(void);
 extern uint dma_check(void);
 extern int dma_xfer(void *dest, uint count, void *src);
@@ -52,15 +58,18 @@ extern int dma_xfer(void *dest, uint count, void *src);
 /*
  * Convert picoseconds into clock cycles (rounding up if needed).
  */
+extern ulong get_ddr_clk(ulong dummy);
 
 int
 picos_to_clk(int picos)
 {
+	unsigned int ddr_bus_clk;
 	int clks;
 
-	clks = picos / (2000000000 / (get_bus_freq(0) / 1000));
-	if (picos % (2000000000 / (get_bus_freq(0) / 1000)) != 0) {
-	clks++;
+	ddr_bus_clk = get_ddr_clk(0) >> 1;
+	clks = picos / ((1000000000 / ddr_bus_clk) * 1000);
+	if (picos % ((1000000000 / ddr_bus_clk) * 1000) !=0) {
+		clks++;
 	}
 
 	return clks;
@@ -104,32 +113,53 @@ static void spd_debug(spd_eeprom_t *spd)
 long int spd_sdram()
 {
 	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
-	volatile ddr8349_t *ddr = &immap->ddr;
-	volatile law8349_t *ecm = &immap->sysconf.ddrlaw[0];
+	volatile ddr83xx_t *ddr = &immap->ddr;
+	volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
 	spd_eeprom_t spd;
-	unsigned tmp, tmp1;
+	unsigned tmp;
 	unsigned int memsize;
 	unsigned int law_size;
-	unsigned char caslat;
-	unsigned int trfc, trfc_clk, trfc_low;
+	unsigned char caslat, caslat_ctrl;
+	unsigned char burstlen;
+	unsigned int max_bus_clk;
+	unsigned int max_data_rate, effective_data_rate;
+	unsigned int ddrc_clk;
+	unsigned int refresh_clk;
+	unsigned sdram_cfg;
+	unsigned int ddrc_ecc_enable;
 
+
+        /* Read SPD parameters with I2C */
 	CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
 #ifdef SPD_DEBUG
 	spd_debug(&spd);
 #endif
+	/* Check the memory type */
+	if (spd.mem_type != SPD_MEMTYPE_DDR) {
+		printf("DDR: Module mem type is %02X\n", spd.mem_type);
+		return 0;
+	}
+
+	/* Check the number of physical bank */
 	if (spd.nrows > 2) {
-		puts("DDR:Only two chip selects are supported on ADS.\n");
+		printf("DDR: The number of physical bank is %02X\n", spd.nrows);
 		return 0;
 	}
 
-	if (spd.nrow_addr < 12
-	    || spd.nrow_addr > 14
-	    || spd.ncol_addr < 8
-	    || spd.ncol_addr > 11) {
-		puts("DDR:Row or Col number unsupported.\n");
+	/* Check if the number of row of the module is in the range of DDRC */
+	if (spd.nrow_addr < 12 || spd.nrow_addr > 14) {
+		printf("DDR: Row number is out of range of DDRC, row=%02X\n",
+							 spd.nrow_addr);
 		return 0;
 	}
 
+	/* Check if the number of col of the module is in the range of DDRC */
+	if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
+		printf("DDR: Col number is out of range of DDRC, col=%02X\n",
+							 spd.ncol_addr);
+		return 0;
+	}
+        /* Setup DDR chip select register */
 	ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
 	ddr->cs_config[2] = ( 1 << 31
 			    | (spd.nrow_addr - 12) << 8
@@ -172,54 +202,84 @@ long int spd_sdram()
 	debug("DDR:ar=0x%08x\n", ecm->ar);
 
 	/*
-	 * find the largest CAS
+	 * Find the largest CAS by locating the highest 1 bit
+	 * in the spd.cas_lat field.  Translate it to a DDR
+	 * controller field value:
+	 *
+	 *	CAS Lat	 DDR I	   Ctrl
+	 *	Clocks	 SPD Bit   Value
+	 *	-------+--------+---------
+	 *	1.0        0        001
+	 *	1.5        1        010
+	 *	2.0        2        011
+	 *	2.5        3        100
+	 *	3.0        4        101
+	 *	3.5        5        110
+	 *	4.0        6        111
 	 */
-	if(spd.cas_lat & 0x40) {
-		caslat = 7;
-	} else if (spd.cas_lat & 0x20) {
-		caslat = 6;
-	} else if (spd.cas_lat & 0x10) {
-		caslat = 5;
-	} else if (spd.cas_lat & 0x08) {
-		caslat = 4;
-	} else if (spd.cas_lat & 0x04) {
-		caslat = 3;
-	} else if (spd.cas_lat & 0x02) {
-		caslat = 2;
-	} else if (spd.cas_lat & 0x01) {
-		caslat = 1;
-	} else {
-		puts("DDR:no valid CAS Latency information.\n");
+	caslat = __ilog2(spd.cas_lat);
+
+	if (caslat > 4 ) {
+		printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n", caslat);
 		return 0;
 	}
+	max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
+			+ (spd.clk_cycle & 0x0f));
+	max_data_rate = max_bus_clk * 2;
+
+	debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate);
+
+	ddrc_clk = get_ddr_clk(0) / 1000000;
 
-	tmp = 20000 / (((spd.clk_cycle & 0xF0) >> 4) * 10
-		       + (spd.clk_cycle & 0x0f));
-	debug("DDR:Module maximum data rate is: %dMhz\n", tmp);
-
-	tmp1 = get_bus_freq(0) / 1000000;
-	if (tmp1 < 230 && tmp1 >= 90 && tmp >= 230) {
-		/* 90~230 range, treated as DDR 200 */
-		if (spd.clk_cycle3 == 0xa0)
-			caslat -= 2;
-		else if(spd.clk_cycle2 == 0xa0)
-			caslat--;
-	} else if (tmp1 < 280 && tmp1 >= 230 && tmp >= 280) {
-		/* 230-280 range, treated as DDR 266 */
-		if (spd.clk_cycle3 == 0x75)
-			caslat -= 2;
-		else if (spd.clk_cycle2 == 0x75)
-			caslat--;
-	} else if (tmp1 < 350 && tmp1 >= 280 && tmp >= 350) {
-		/* 280~350 range, treated as DDR 333 */
-		if (spd.clk_cycle3 == 0x60)
-			caslat -= 2;
-		else if (spd.clk_cycle2 == 0x60)
-			caslat--;
-	} else if (tmp1 < 90 || tmp1 >= 350) {
-		/* DDR rate out-of-range */
-		puts("DDR:platform frequency is not fit for DDR rate\n");
+	if (max_data_rate >= 390) { /* it is DDR 400 */
+		printf("DDR: platform not support DDR 400\n");
 		return 0;
+	} else if (max_data_rate >= 323) { /* it is DDR 333 */
+		if (ddrc_clk <= 350 && ddrc_clk > 280) {
+			/* DDRC clk at 280~350 */
+			effective_data_rate = 333; /* 6ns */
+			caslat = caslat;
+		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+			/* DDRC clk at 230~280 */
+			if (spd.clk_cycle2 == 0x75) {
+				effective_data_rate = 266; /* 7.5ns */
+				caslat = caslat - 1;
+			}
+		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+			/* DDRC clk at 90~230 */
+			if (spd.clk_cycle3 == 0xa0) {
+				effective_data_rate = 200; /* 10ns */
+				caslat = caslat - 2;
+			}
+		}
+	} else if (max_data_rate >= 256) { /* it is DDR 266 */
+		if (ddrc_clk <= 350 && ddrc_clk > 280) {
+			/* DDRC clk at 280~350 */
+			printf("DDR: DDR controller freq is more than "
+				"max data rate of the module\n");
+			return 0;
+		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+			/* DDRC clk at 230~280 */
+			effective_data_rate = 266; /* 7.5ns */
+			caslat = caslat;
+		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+			/* DDRC clk at 90~230 */
+			if (spd.clk_cycle2 == 0xa0) {
+				effective_data_rate = 200; /* 10ns */
+				caslat = caslat - 1;
+			}
+		}
+	} else if (max_data_rate >= 190) { /* it is DDR 200 */
+		if (ddrc_clk <= 350 && ddrc_clk > 230) {
+			/* DDRC clk at 230~350 */
+			printf("DDR: DDR controller freq is more than "
+				"max data rate of the module\n");
+			return 0;
+		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+			/* DDRC clk at 90~230 */
+			effective_data_rate = 200; /* 10ns */
+			caslat = caslat;
+		}
 	}
 
 	/*
@@ -229,16 +289,14 @@ long int spd_sdram()
 	 * note: WRREC(Twr) and WRTORD(Twtr) are not in SPD,
 	 * use conservative value here.
 	 */
-	trfc = spd.trfc * 1000;         /* up to ps */
-	trfc_clk = picos_to_clk(trfc);
-	trfc_low = (trfc_clk - 8) & 0xf;
+	caslat_ctrl = (caslat + 1) & 0x07; /* see as above */
 
 	ddr->timing_cfg_1 =
 	    (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |
 	     ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) |
 	     ((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) |
-	     ((caslat & 0x07) << 16 ) |
-	     (trfc_low << 12 ) |
+	     ((caslat_ctrl & 0x07) << 16 ) |
+	     (((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) |
 	     ( 0x300 ) |
 	     ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1);
 
@@ -246,36 +304,49 @@ long int spd_sdram()
 
 	debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1);
 	debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
+	/* Setup init value, but not enable */
+	ddr->sdram_cfg = 0x42000000;
+
+	/* Check DIMM data bus width */
+	if (spd.dataw_lsb == 0x20)
+	{
+		burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
+		printf("\n   DDR DIMM: data bus width is 32 bit");
+	}
+	else
+	{
+		burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
+		printf("\n   DDR DIMM: data bus width is 64 bit");
+	}
 
-	/*
-	 * Only DDR I is supported
-	 * DDR I and II have different mode-register-set definition
+	/* Is this an ECC DDR chip? */
+	if (spd.config == 0x02) {
+		printf(" with ECC\n");
+	}
+	else
+		printf(" without ECC\n");
+
+	/* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
+	   Burst type is sequential
 	 */
 	switch(caslat) {
+	case 1:
+		ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
+		break;
 	case 2:
-		tmp = 0x50; /* 1.5 */
+		ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
 		break;
 	case 3:
-		tmp = 0x20; /* 2.0 */
+		ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
 		break;
 	case 4:
-		tmp = 0x60; /* 2.5 */
-		break;
-	case 5:
-		tmp = 0x30; /* 3.0 */
+		ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
 		break;
 	default:
-		puts("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 is supported.\n");
+		printf("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 "
+					"is supported.\n");
 		return 0;
 	}
-#if defined (CONFIG_DDR_32BIT)
-	/* set burst length to 8 for 32-bit data path */
-	tmp |= 0x03;
-#else
-	/* set burst length to 4 - default for 64-bit data path */
-	tmp |= 0x02;
-#endif
-	ddr->sdram_mode = tmp;
 	debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
 
 	switch(spd.refresh) {
@@ -315,33 +386,15 @@ long int spd_sdram()
 	ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100;
 	debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
 
-	/*
-	 * Is this an ECC DDR chip?
-	 */
-#if defined(CONFIG_DDR_ECC)
-	if (spd.config == 0x02) {
-		/* disable error detection */
-		ddr->err_disable = ~ECC_ERROR_ENABLE;
+	/* SS_EN = 0, source synchronous disable
+	 * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd
+         */
+	ddr->sdram_clk_cntl = 0x00000000;
+	debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
 
-		/* set single bit error threshold to maximum value,
-		 * reset counter to zero */
-		ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
-			(0 << ECC_ERROR_MAN_SBEC_SHIFT);
-	}
-	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
-	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
-#endif
 	asm("sync;isync");
 
-	udelay(500);
-
-	/*
-	 * SS_EN=1,
-	 * CLK_ADJST = 2-MCK/MCK_B, is lauched 1/2 of one SDRAM
-	 * clock cycle after address/command
-	 */
-	/*ddr->sdram_clk_cntl = 0x82000000;*/
-	ddr->sdram_clk_cntl = (DDR_SDRAM_CLK_CNTL_SS_EN|DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05);
+	udelay(600);
 
 	/*
 	 * Figure out the settings for the sdram_cfg register.  Build up
@@ -352,38 +405,48 @@ long int spd_sdram()
 	 * sdram_cfg[0]   = 1 (ddr sdram logic enable)
 	 * sdram_cfg[1]   = 1 (self-refresh-enable)
 	 * sdram_cfg[6:7] = 2 (SDRAM type = DDR SDRAM)
+	 * sdram_cfg[12] = 0 (32_BE =0 , 64 bit bus mode)
+	 * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts)
 	 */
-	tmp = 0xc2000000;
+	sdram_cfg = 0xC2000000;
 
-#if defined (CONFIG_DDR_32BIT)
-	/* in 32-Bit mode burst len is 8 beats */
-	tmp |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
-#endif
-	/*
-	 * sdram_cfg[3] = RD_EN - registered DIMM enable
-	 *   A value of 0x26 indicates micron registered DIMMS (micron.com)
-	 */
-	if (spd.mod_attr == 0x26) {
-		tmp |= 0x10000000;
+	/* sdram_cfg[3] = RD_EN - registered DIMM enable */
+	if (spd.mod_attr & 0x02) {
+		sdram_cfg |= 0x10000000;
 	}
 
+	/* The DIMM is 32bit width */
+	if (spd.dataw_lsb == 0x20) {
+		sdram_cfg |= 0x000C0000;
+	}
+	ddrc_ecc_enable = 0;
+
 #if defined(CONFIG_DDR_ECC)
-	/*
-	 * If the user wanted ECC (enabled via sdram_cfg[2])
-	 */
+	/* Enable ECC with sdram_cfg[2] */
 	if (spd.config == 0x02) {
-		tmp |= SDRAM_CFG_ECC_EN;
+		sdram_cfg |= 0x20000000;
+		ddrc_ecc_enable = 1;
+		/* disable error detection */
+		ddr->err_disable = ~ECC_ERROR_ENABLE;
+		/* set single bit error threshold to maximum value,
+		 * reset counter to zero */
+		ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
+			(0 << ECC_ERROR_MAN_SBEC_SHIFT);
 	}
+
+	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
+	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
 #endif
+	printf("   DDRC ECC mode: %s", ddrc_ecc_enable ? "ON":"OFF");
 
 #if defined(CONFIG_DDR_2T_TIMING)
 	/*
 	 * Enable 2T timing by setting sdram_cfg[16].
 	 */
-	tmp |= SDRAM_CFG_2T_EN;
+	sdram_cfg |= SDRAM_CFG_2T_EN;
 #endif
-
-	ddr->sdram_cfg = tmp;
+	/* Enable controller, and GO! */
+	ddr->sdram_cfg = sdram_cfg;
 	asm("sync;isync");
 	udelay(500);
 
@@ -393,7 +456,7 @@ long int spd_sdram()
 #endif /* CONFIG_SPD_EEPROM */
 
 
-#if defined(CONFIG_DDR_ECC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
 /*
  * Use timebase counter, get_timer() is not availabe
  * at this point of initialization yet.
@@ -431,7 +494,7 @@ void ddr_enable_ecc(unsigned int dram_size)
 {
 	uint *p;
 	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
-	volatile ddr8349_t *ddr = &immap->ddr;
+	volatile ddr83xx_t *ddr= &immap->ddr;
 	unsigned long t_start, t_end;
 #if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
 	uint i;
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index ad6b3f669f..412713f322 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -337,6 +337,12 @@ int get_clocks (void)
 	return 0;
 }
 
+ulong get_ddr_clk(ulong dummy)
+{
+	return gd->ddr_clk;
+}
+
+
 /********************************************
  * get_bus_freq
  * return system bus freq in Hz
-- 
cgit v1.2.1


From 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 22 Aug 2006 17:07:00 -0500
Subject: mpc83xx: Add support for variable flash memory sizes on 83xx systems

CHANGELOG:

* On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
   window registers, instead of using a hard-coded value of 8MB.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 cpu/mpc83xx/start.S | 29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index 6e02cce799..a7ed3c5b2c 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -2,7 +2,7 @@
  * Copyright (C) 1998  Dan Malek <dmalek@jlc.net>
  * Copyright (C) 1999  Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
  * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright Freescale Semiconductor, Inc. 2004, 2006. All rights reserved.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -1214,8 +1214,15 @@ map_flash_by_law1:
 	lis r4, (CFG_FLASH_BASE)@h
 	ori r4, r4, (CFG_FLASH_BASE)@l
 	stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_FLASH_BASE */
-	lis r4, (0x80000016)@h
-	ori r4, r4, (0x80000016)@l
+
+	/* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR1 */
+	lis r4, (0x80000012)@h
+	ori r4, r4, (0x80000012)@l
+	li r5, CFG_FLASH_SIZE
+1:	srawi. r5, r5, 1	/* r5 = r5 >> 1 */
+	addi r4, r4, 1
+	bne 1b
+
 	stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
 	blr
 
@@ -1234,17 +1241,23 @@ remap_flash_by_law0:
 	stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
 
 	lwz r4, OR0(r3)
-	lis r5, 0xFF80 /* 8M */
+	lis r5, ~((CFG_FLASH_SIZE << 4) - 1)
 	or r4, r4, r5
-	stw r4, OR0(r3) /* OR0 <= OR0 | 0xFF800000 */
+	stw r4, OR0(r3)
 
 	lis r4, (CFG_FLASH_BASE)@h
 	ori r4, r4, (CFG_FLASH_BASE)@l
 	stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_FLASH_BASE */
 
-	lis r4, (0x80000016)@h
-	ori r4, r4, (0x80000016)@l
-	stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= 8MB Flash Size */
+	/* Store 0x80000012 + log2(CFG_FLASH_SIZE) into LBLAWAR0 */
+	lis r4, (0x80000012)@h
+	ori r4, r4, (0x80000012)@l
+	li r5, CFG_FLASH_SIZE
+1:	srawi. r5, r5, 1 /* r5 = r5 >> 1 */
+	addi r4, r4, 1
+	bne 1b
+	stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */
+
 
 	xor r4, r4, r4
 	stw r4, LBLAWBAR1(r3)
-- 
cgit v1.2.1


From bed85caf872714ebf53013967a695c9d63acfc68 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 31 Oct 2006 18:13:36 -0600
Subject: mpc83xx: Add support for Errata DDR6 on MPC 834x systems

CHANGELOG:

* Errata DDR6, which affects all current MPC 834x processors, lists changes
  required to maintain compatibility with various types of DDR memory.  This
  patch implements those changes.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 cpu/mpc83xx/spd_sdram.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 153848d343..8ee4234631 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -112,11 +112,14 @@ static void spd_debug(spd_eeprom_t *spd)
 
 long int spd_sdram()
 {
+#ifdef CONFIG_MPC834X
+	int caslat_83xx;  /* For Errata DDR6 */
+#endif
 	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
 	volatile ddr83xx_t *ddr = &immap->ddr;
 	volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
 	spd_eeprom_t spd;
-	unsigned tmp;
+	unsigned int tmp, tmp1;
 	unsigned int memsize;
 	unsigned int law_size;
 	unsigned char caslat, caslat_ctrl;
@@ -282,6 +285,40 @@ long int spd_sdram()
 		}
 	}
 
+#ifdef CONFIG_MPC834X
+/* Errata DDR6
+   This errata affects all MPC8349E, MPC8343E and MPC8347E processors.
+*/
+	if ((tmp1 >= 280) && (tmp1 < 350)) /* CSB=333 */
+	{
+		if (spd.mid[0] == 0x2c) {
+			/* Micron memory running at 333 MHz */
+			/* Chances are, U-Boot will crash before we get here,
+			   but just in case, display a message and return error. */
+			printf("Micron DDR not supported at 333MHz CSB\n");
+			return 0;
+		} else if (spd.mid[0] == 0xad) {
+			printf("Hynix DDR does not require Errata DDR6\n");
+		} else {
+			/* enable 2 cycle Earlier for CL=2.5 or 3 */
+			ddr->debug_reg = 0x202c0000;
+			printf("Errata DDR6 (debug_reg=0x%x)\n", ddr->debug_reg);
+		}
+		caslat_83xx = caslat;
+	}
+
+	if ((tmp1 >= 230) && (tmp1 < 280)) {  /* CSB=266 */
+		if (spd.mid[0] != 0x2c) /* non-Micron */
+			caslat_83xx = caslat - 1;
+
+	}
+
+	if ((tmp1 >= 90) && (tmp1 < 230)) {  /* CSB=200 */
+		caslat = 3;
+		caslat_83xx = 2;
+	}
+#endif
+
 	/*
 	 * note: caslat must also be programmed into ddr->sdram_mode
 	 * register.
@@ -295,7 +332,11 @@ long int spd_sdram()
 	    (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |
 	     ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) |
 	     ((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) |
+#ifdef CONFIG_MPC834x
+	     ((caslat_83xx & 0x07) << 16 ) |
+#else
 	     ((caslat_ctrl & 0x07) << 16 ) |
+#endif
 	     (((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) |
 	     ( 0x300 ) |
 	     ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1);
-- 
cgit v1.2.1


From b24f119d672b709d153ff2ac091d4aa63ec6877d Mon Sep 17 00:00:00 2001
From: Ben Warren <bwarren@qstreams.com>
Date: Thu, 7 Sep 2006 16:51:04 -0400
Subject: Multi-bus I2C implementation of MPC834x

Hello,

Attached is a patch implementing multiple I2C buses on the MPC834x CPU
family and the MPC8349EMDS board in particular.
This patch requires Patch 1 (Add support for multiple I2C buses).
Testing was performed on a 533MHz board.

/*** Note: This patch replaces ticket DNX#2006083042000027 ***/

Signed-off-by: Ben Warren <bwarren@qstreams.com>

CHANGELOG:
        Implemented driver-level code to support two I2C buses on the
MPC834x CPU family and the MPC8349EMDS board.  Available I2C bus speeds
are 50kHz, 100kHz and 400kHz on each bus.

regards,
Ben
---
 cpu/mpc83xx/i2c.c | 168 ++++++++++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 144 insertions(+), 24 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c
index 723feeb44f..fc89fb1e25 100644
--- a/cpu/mpc83xx/i2c.c
+++ b/cpu/mpc83xx/i2c.c
@@ -45,37 +45,123 @@
 #include <i2c.h>
 #include <asm/i2c.h>
 
-#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X)
-i2c_t * mpc83xx_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C_OFFSET);
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Three I2C bus speeds are supported here (50kHz, 100kHz
+ * and 400kHz).  It should be easy to add more.  Note that
+ * the maximum bus speed for I2C bus 1 is CSB/3, while I2C
+ * bus 2 can go as high as CSB.
+ * Typical values for CSB are 266MHz and 200MHz.  */
+
+                                                                      /* 50kH  100kHz  400kHz */
+static const uchar speed_map_266[][3] =
+                                                                      {{0x2e,         0x2a,   0x20},  /* base 88MHz */
+                                                                       {0x34,         0x30,   0x28}}; /* base 266 MHz */
+
+static const uchar speed_map_200[][3] =
+                                                                      {{0x2c,         0x28,   0x20},  /* base 66 MHz */
+                                                                       {0x33,         0x2f,   0x26}}; /* base 200 MHz */
+
+/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
+ * Default is bus 1.  This is necessary because the DDR initialization
+ * runs from ROM, and we can't switch buses because we can't modify
+ * the i2c_dev variable.  Everything gets straightened out once i2c_init
+ * is called from RAM.  */
+
+#if defined CFG_SPD_BUS_NUM
+static i2c_t *i2c_dev = CFG_SPD_BUS_NUM;
+#else
+static i2c_t *i2c_dev = I2C_1;
 #endif
 
-void
-i2c_init(int speed, int slaveadd)
+static uchar busNum = I2C_BUS_1 ;
+static int bus_speed[2] = {0, 0};
+
+static int set_speed(int speed)
+{
+      uchar value;
+      const uchar *spdPtr;
+
+      /* Global data contains maximum I2C bus 1 speed, which is CSB/3 */
+      if(gd->i2c_clk == 88000000)
+      {
+              spdPtr = speed_map_266[busNum];
+      }
+      else if(gd->i2c_clk == 66000000)
+      {
+              spdPtr = speed_map_200[busNum];
+      }
+      else
+      {
+              printf("Max I2C bus speed %d not supported\n", gd->i2c_clk);
+              return -1;
+      }
+
+      switch(speed)
+      {
+              case 50000:
+                      value   = *(spdPtr + 0);
+                      break;
+              case 100000:
+                      value   = *(spdPtr + 1);
+                      break;
+              case 400000:
+                      value   = *(spdPtr + 2);
+                      break;
+              default:
+                      printf("I2C bus speed %d not supported\n", speed);
+                      return -2;
+      }
+      /* set clock */
+      writeb(value, &i2c_dev->fdr);
+      bus_speed[busNum] = speed;
+      return 0;
+}
+
+
+static void _i2c_init(int speed, int slaveadd)
 {
 	/* stop I2C controller */
-	writeb(0x00 , &I2C->cr);
+	writeb(0x00 , &i2c_dev->cr);
 
 	/* set clock */
-	writeb(speed, &I2C->fdr);
+	writeb(speed, &i2c_dev->fdr);
 
 	/* set default filter */
-	writeb(0x10,&I2C->dfsrr);
+	writeb(0x10,&i2c_dev->dfsrr);
 
 	/* write slave address */
-	writeb(slaveadd, &I2C->adr);
+	writeb(slaveadd, &i2c_dev->adr);
 
 	/* clear status register */
-	writeb(0x00, &I2C->sr);
+	writeb(0x00, &i2c_dev->sr);
 
 	/* start I2C controller */
-	writeb(I2C_CR_MEN, &I2C->cr);
+	writeb(I2C_CR_MEN, &i2c_dev->cr);
+}
+
+void i2c_init(int speed, int slaveadd)
+{
+      /* Set both interfaces to the same speed and slave address */
+      /* Note: This function gets called twice - before and after
+       * relocation to RAM.  The first time it's called, we are unable
+       * to change buses, so whichever one 'i2c_dev' was initialized to
+       * gets set twice.  When run from RAM both buses get set properly */
+
+      i2c_set_bus_num(I2C_BUS_1);
+      _i2c_init(speed, slaveadd);
+#ifdef        CFG_I2C2_OFFSET
+      i2c_set_bus_num(I2C_BUS_2);
+      _i2c_init(speed, slaveadd);
+      i2c_set_bus_num(I2C_BUS_1);
+#endif        /* CFG_I2C2_OFFSET */
 }
 
 static __inline__ int
 i2c_wait4bus (void)
 {
 	ulong timeval = get_timer (0);
-	while (readb(&I2C->sr) & I2C_SR_MBB) {
+	while (readb(&i2c_dev->sr) & I2C_SR_MBB) {
 		if (get_timer (timeval) > I2C_TIMEOUT) {
 			return -1;
 		}
@@ -89,12 +175,12 @@ i2c_wait (int write)
 	u32 csr;
 	ulong timeval = get_timer(0);
 	do {
-		csr = readb(&I2C->sr);
+		csr = readb(&i2c_dev->sr);
 
 		if (!(csr & I2C_SR_MIF))
 			continue;
 
-		writeb(0x0, &I2C->sr);
+		writeb(0x0, &i2c_dev->sr);
 
 		if (csr & I2C_SR_MAL) {
 			debug("i2c_wait: MAL\n");
@@ -123,9 +209,9 @@ i2c_write_addr (u8 dev, u8 dir, int rsta)
 {
 	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX |
 	       (rsta?I2C_CR_RSTA:0),
-	       &I2C->cr);
+	       &i2c_dev->cr);
 
-	writeb((dev << 1) | dir, &I2C->dr);
+	writeb((dev << 1) | dir, &i2c_dev->dr);
 
 	if (i2c_wait (I2C_WRITE) < 0)
 		return 0;
@@ -138,10 +224,10 @@ __i2c_write (u8 *data, int length)
 	int i;
 
 	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
-	       &I2C->cr);
+	       &i2c_dev->cr);
 
 	for (i=0; i < length; i++) {
-		writeb(data[i], &I2C->dr);
+		writeb(data[i], &i2c_dev->dr);
 
 		if (i2c_wait (I2C_WRITE) < 0)
 			break;
@@ -156,10 +242,10 @@ __i2c_read (u8 *data, int length)
 
 	writeb(I2C_CR_MEN | I2C_CR_MSTA |
 	       ((length == 1) ? I2C_CR_TXAK : 0),
-	       &I2C->cr);
+	       &i2c_dev->cr);
 
 	/* dummy read */
-	readb(&I2C->dr);
+	readb(&i2c_dev->dr);
 
 	for (i=0; i < length; i++) {
 		if (i2c_wait (I2C_READ) < 0)
@@ -169,13 +255,13 @@ __i2c_read (u8 *data, int length)
 		if (i == length - 2)
 			writeb(I2C_CR_MEN | I2C_CR_MSTA |
 			       I2C_CR_TXAK,
-			       &I2C->cr);
+			       &i2c_dev->cr);
 
 		/* Generate stop on last byte */
 		if (i == length - 1)
-			writeb(I2C_CR_MEN | I2C_CR_TXAK, &I2C->cr);
+			writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev->cr);
 
-		data[i] = readb(&I2C->dr);
+		data[i] = readb(&i2c_dev->dr);
 	}
 	return i;
 }
@@ -201,7 +287,7 @@ i2c_read (u8 dev, uint addr, int alen, u8 *data, int length)
 	i = __i2c_read (data, length);
 
  exit:
-	writeb(I2C_CR_MEN, &I2C->cr);
+	writeb(I2C_CR_MEN, &i2c_dev->cr);
 	return !(i == length);
 }
 
@@ -223,7 +309,7 @@ i2c_write (u8 dev, uint addr, int alen, u8 *data, int length)
 	i = __i2c_write (data, length);
 
  exit:
-	writeb(I2C_CR_MEN, &I2C->cr);
+	writeb(I2C_CR_MEN, &i2c_dev->cr);
 	return !(i == length);
 }
 
@@ -254,4 +340,38 @@ void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
 	i2c_write (i2c_addr, reg, 1, &val, 1);
 }
 
+int 	i2c_set_bus_num(uchar bus)
+{
+	if(bus == I2C_BUS_1)
+	{
+		i2c_dev = I2C_1;
+	}
+#ifdef	CFG_I2C2_OFFSET
+	else if(bus == I2C_BUS_2)
+	{
+		i2c_dev = I2C_2;
+	}
+#endif	/* CFG_I2C2_OFFSET */
+	else
+	{
+		return -1;
+	}
+	busNum = bus;
+	return 0;
+}
+
+int 	i2c_set_bus_speed(int speed)
+{
+	return set_speed(speed);
+}
+
+uchar i2c_get_bus_num(void)
+{
+	return busNum;
+}
+
+int 	i2c_get_bus_speed(void)
+{
+	return bus_speed[busNum];
+}
 #endif /* CONFIG_HARD_I2C */
-- 
cgit v1.2.1


From 2ad6b513b31070bd0c003792ed1c3e7f5d740357 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 31 Oct 2006 18:44:42 -0600
Subject: mpc83xx: Add support for the MPC8349E-mITX

PREREQUISITE PATCHES:

* This patch can only be applied after the following patches have been applied:

  1) DNX#2006090742000024 "Add support for multiple I2C buses"
  2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
  3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
  4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
  5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"

CHANGELOG:

* Add support for the Freescale MPC8349E-mITX reference design platform.
  The second TSEC (Vitesse 7385 switch) is not supported at this time.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 cpu/mpc83xx/cpu.c       | 81 +++++++++++++++++++++++++++++++++++++++++++++++--
 cpu/mpc83xx/cpu_init.c  | 31 +++++++++++++++++++
 cpu/mpc83xx/spd_sdram.c | 21 +++++++++++++
 3 files changed, 130 insertions(+), 3 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 8d543d5c99..4e82a8b789 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -69,9 +69,72 @@ int checkcpu(void)
 }
 
 
+/**
+ * Program a UPM with the code supplied in the table.
+ *
+ * The 'dummy' variable is used to increment the MAD. 'dummy' is
+ * supposed to be a pointer to the memory of the device being
+ * programmed by the UPM.  The data in the MDR is written into
+ * memory and the MAD is incremented every time there's a read
+ * from 'dummy'. Unfortunately, the current prototype for this
+ * function doesn't allow for passing the address of this
+ * device, and changing the prototype will break a number lots
+ * of other code, so we need to use a round-about way of finding
+ * the value for 'dummy'.
+ *
+ * The value can be extracted from the base address bits of the
+ * Base Register (BR) associated with the specific UPM.  To find
+ * that BR, we need to scan all 8 BRs until we find the one that
+ * has its MSEL bits matching the UPM we want.  Once we know the
+ * right BR, we can extract the base address bits from it.
+ *
+ * The MxMR and the BR and OR of the chosen bank should all be
+ * configured before calling this function.
+ *
+ * Parameters:
+ * upm: 0=UPMA, 1=UPMB, 2=UPMC
+ * table: Pointer to an array of values to program
+ * size: Number of elements in the array.  Must be 64 or less.
+*/
 void upmconfig (uint upm, uint *table, uint size)
 {
-	hang();		/* FIXME: upconfig() needed? */
+#if defined(CONFIG_MPC834X)
+	volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+	volatile lbus83xx_t *lbus = &immap->lbus;
+	volatile uchar *dummy = NULL;
+	const u32 msel = (upm + 4) << BR_MSEL_SHIFT;	/* What the MSEL field in BRn should be */
+	volatile u32 *mxmr = &lbus->mamr + upm;	/* Pointer to mamr, mbmr, or mcmr */
+	uint i;
+
+	/* Scan all the banks to determine the base address of the device */
+	for (i = 0; i < 8; i++) {
+		if ((lbus->bank[i].br & BR_MSEL) == msel) {
+			dummy = (uchar *) (lbus->bank[i].br & BR_BA);
+			break;
+		}
+	}
+
+	if (!dummy) {
+		printf("Error: %s() could not find matching BR\n", __FUNCTION__);
+		hang();
+	}
+
+	/* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
+	*mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
+
+	for (i = 0; i < size; i++) {
+		lbus->mdr = table[i];
+		__asm__ __volatile__ ("sync");
+		*dummy;	/* Write the value to memory and increment MAD */
+		__asm__ __volatile__ ("sync");
+	}
+
+	/* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
+	*mxmr &= 0xCFFFFFC0;
+#else
+	printf("Error: %s() not defined for this configuration.\n", __FUNCTION__);
+	hang();
+#endif
 }
 
 
@@ -150,9 +213,21 @@ unsigned long get_tbclk(void)
 #if defined(CONFIG_WATCHDOG)
 void watchdog_reset (void)
 {
-	hang();		/* FIXME: implement watchdog_reset()? */
+#ifdef CONFIG_MPC834X
+	int re_enable = disable_interrupts();
+
+	/* Reset the 83xx watchdog */
+	volatile immap_t *immr = (immap_t *) CFG_IMMRBAR;
+	immr->wdt.swsrr = 0x556c;
+	immr->wdt.swsrr = 0xaa39;
+
+	if (re_enable)
+		enable_interrupts ();
+#else
+	hang();
+#endif
 }
-#endif /* CONFIG_WATCHDOG */
+#endif
 
 #if defined(CONFIG_OF_FLAT_TREE)
 void
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 6ed0992c07..999fe71964 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -46,6 +46,37 @@ void cpu_init_f (volatile immap_t * im)
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
 
+	/* system performance tweaking */
+
+#ifdef CFG_ACR_PIPE_DEP
+	/* Arbiter pipeline depth */
+	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | (3 << ACR_PIPE_DEP_SHIFT);
+#endif
+
+#ifdef CFG_SPCR_TSEC1EP
+	/* TSEC1 Emergency priority */
+	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) | (3 << SPCR_TSEC1EP_SHIFT);
+#endif
+
+#ifdef CFG_SPCR_TSEC2EP
+	/* TSEC2 Emergency priority */
+	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (3 << SPCR_TSEC2EP_SHIFT);
+#endif
+
+#ifdef CFG_SCCR_TSEC1CM
+	/* TSEC1 clock mode */
+	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (1 << SCCR_TSEC1CM_SHIFT);
+#endif
+#ifdef CFG_SCCR_TSEC2CM
+	/* TSEC2 & I2C1 clock mode */
+	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (1 << SCCR_TSEC2CM_SHIFT);
+#endif
+
+#ifdef CFG_ACR_RPTCNT
+	/* Arbiter repeat count */
+	im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | (3 << ACR_RPTCNT_SHIFT));
+#endif
+
 	/* RSR - Reset Status Register - clear all status (4.6.1.3) */
 	gd->reset_status = im->reset.rsr;
 	im->reset.rsr = ~(RSR_RES);
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 8ee4234631..3dfde8ac04 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -133,6 +133,26 @@ long int spd_sdram()
 
 
         /* Read SPD parameters with I2C */
+#ifdef CFG_83XX_DDR_USES_CS0
+	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
+	ddr->cs_config[0] = ( 1 << 31
+			    | (spd.nrow_addr - 12) << 8
+			    | (spd.ncol_addr - 8) );
+	debug("\n");
+	debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
+	debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
+
+	if (spd.nrows == 2) {
+		ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
+				  | ((banksize(spd.row_dens) >> 23) - 1) );
+		ddr->cs_config[1] = ( 1<<31
+				    | (spd.nrow_addr-12) << 8
+				    | (spd.ncol_addr-8) );
+		debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
+		debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
+	}
+
+#else
 	CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
 #ifdef SPD_DEBUG
 	spd_debug(&spd);
@@ -180,6 +200,7 @@ long int spd_sdram()
 		debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
 		debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
 	}
+#endif
 
 	if (spd.mem_type != 0x07) {
 		puts("No DDR module found!\n");
-- 
cgit v1.2.1


From 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 Mon Sep 17 00:00:00 2001
From: Dave Liu <daveliu@freescale.com>
Date: Fri, 3 Nov 2006 19:33:44 -0600
Subject: mpc83xx: Add MPC8360EMDS basic board support

Add support for the Freescale MPC8360EMDS board.
Includes DDR, DUART, Local Bus, PCI.
---
 cpu/mpc83xx/cpu.c       |  54 ++++++++-
 cpu/mpc83xx/spd_sdram.c | 304 ++++++++++++++++++++++++------------------------
 cpu/mpc83xx/speed.c     | 209 +++++++++++++++++----------------
 3 files changed, 309 insertions(+), 258 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 4e82a8b789..1de337b33c 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -43,28 +43,70 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int checkcpu(void)
 {
+	volatile immap_t *immr;
 	ulong clock = gd->cpu_clk;
 	u32 pvr = get_pvr();
+	u32 spridr;
 	char buf[32];
 
+	immr = (immap_t *)CFG_IMMRBAR;
+
 	if ((pvr & 0xFFFF0000) != PVR_83xx) {
 		puts("Not MPC83xx Family!!!\n");
 		return -1;
 	}
 
-	puts("CPU:   MPC83xx, ");
-	switch(pvr) {
-	case PVR_8349_REV10:
+	spridr = immr->sysconf.spridr;
+	puts("CPU: ");
+	switch(spridr) {
+	case SPR_8349E_REV10:
+	case SPR_8349E_REV11:
+		puts("MPC8349E, ");
+		break;
+	case SPR_8349_REV10:
+	case SPR_8349_REV11:
+		puts("MPC8349, ");
+		break;
+	case SPR_8347E_REV10_TBGA:
+	case SPR_8347E_REV11_TBGA:
+	case SPR_8347E_REV10_PBGA:
+	case SPR_8347E_REV11_PBGA:
+		puts("MPC8347E, ");
+		break;
+	case SPR_8347_REV10_TBGA:
+	case SPR_8347_REV11_TBGA:
+	case SPR_8347_REV10_PBGA:
+	case SPR_8347_REV11_PBGA:
+		puts("MPC8347, ");
+		break;
+	case SPR_8343E_REV10:
+	case SPR_8343E_REV11:
+		puts("MPC8343E, ");
 		break;
-	case PVR_8349_REV11:
+	case SPR_8343_REV10:
+	case SPR_8343_REV11:
+		puts("MPC8343, ");
+		break;
+	case SPR_8360E_REV10:
+	case SPR_8360E_REV11:
+	case SPR_8360E_REV12:
+		puts("MPC8360E, ");
+		break;
+	case SPR_8360_REV10:
+	case SPR_8360_REV11:
+	case SPR_8360_REV12:
+		puts("MPC8360, ");
 		break;
 	default:
 		puts("Rev: Unknown\n");
 		return -1;	/* Not sure what this is */
 	}
-	printf("Rev: %d.%d at %s MHz\n", (pvr & 0xf0) >> 4,
-		(pvr & 0x0f), strmhz(buf, clock));
 
+#if defined(CONFIG_MPC8349)
+	printf("Rev: %02x at %s MHz\n", (spridr & 0x0000FFFF)>>4 |(spridr & 0x0000000F), strmhz(buf, clock));
+#else
+	printf("Rev: %02x at %s MHz\n", spridr & 0x0000FFFF, strmhz(buf, clock));
+#endif
 	return 0;
 }
 
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 3dfde8ac04..acc8c9e79b 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -4,7 +4,7 @@
  * (C) Copyright 2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
  * (C) Copyright 2003 Motorola Inc.
  * Xianghua Xiao (X.Xiao@motorola.com)
  *
@@ -112,14 +112,10 @@ static void spd_debug(spd_eeprom_t *spd)
 
 long int spd_sdram()
 {
-#ifdef CONFIG_MPC834X
-	int caslat_83xx;  /* For Errata DDR6 */
-#endif
 	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
 	volatile ddr83xx_t *ddr = &immap->ddr;
 	volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
 	spd_eeprom_t spd;
-	unsigned int tmp, tmp1;
 	unsigned int memsize;
 	unsigned int law_size;
 	unsigned char caslat, caslat_ctrl;
@@ -131,28 +127,7 @@ long int spd_sdram()
 	unsigned sdram_cfg;
 	unsigned int ddrc_ecc_enable;
 
-
         /* Read SPD parameters with I2C */
-#ifdef CFG_83XX_DDR_USES_CS0
-	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
-	ddr->cs_config[0] = ( 1 << 31
-			    | (spd.nrow_addr - 12) << 8
-			    | (spd.ncol_addr - 8) );
-	debug("\n");
-	debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
-	debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
-
-	if (spd.nrows == 2) {
-		ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
-				  | ((banksize(spd.row_dens) >> 23) - 1) );
-		ddr->cs_config[1] = ( 1<<31
-				    | (spd.nrow_addr-12) << 8
-				    | (spd.ncol_addr-8) );
-		debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
-		debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
-	}
-
-#else
 	CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
 #ifdef SPD_DEBUG
 	spd_debug(&spd);
@@ -183,6 +158,26 @@ long int spd_sdram()
 		return 0;
 	}
         /* Setup DDR chip select register */
+#ifdef CFG_83XX_DDR_USES_CS0
+	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
+	ddr->cs_config[0] = ( 1 << 31
+			    | (spd.nrow_addr - 12) << 8
+			    | (spd.ncol_addr - 8) );
+	debug("\n");
+	debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
+	debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
+
+	if (spd.nrows == 2) {
+		ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
+				  | ((banksize(spd.row_dens) >> 23) - 1) );
+		ddr->cs_config[1] = ( 1<<31
+				    | (spd.nrow_addr-12) << 8
+				    | (spd.ncol_addr-8) );
+		debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
+		debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
+	}
+
+#else
 	ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
 	ddr->cs_config[2] = ( 1 << 31
 			    | (spd.nrow_addr - 12) << 8
@@ -243,8 +238,9 @@ long int spd_sdram()
 	 */
 	caslat = __ilog2(spd.cas_lat);
 
-	if (caslat > 4 ) {
-		printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n", caslat);
+	if (caslat > 6 ) {
+		printf("DDR: Invalid SPD CAS Latency, caslat=%02X\n",
+			spd.cas_lat);
 		return 0;
 	}
 	max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
@@ -256,89 +252,110 @@ long int spd_sdram()
 	ddrc_clk = get_ddr_clk(0) / 1000000;
 
 	if (max_data_rate >= 390) { /* it is DDR 400 */
-		printf("DDR: platform not support DDR 400\n");
-		return 0;
+		if (ddrc_clk <= 410 && ddrc_clk > 350) {
+			/* DDR controller clk at 350~410 */
+			effective_data_rate = 400; /* 5ns */
+			caslat = caslat;
+		} else if (ddrc_clk <= 350 && ddrc_clk > 280) {
+			/* DDR controller clk at 280~350 */
+			effective_data_rate = 333; /* 6ns */
+			if (spd.clk_cycle2 == 0x60) {
+				caslat = caslat - 1;
+			} else {
+				caslat = caslat;
+			}
+		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
+			/* DDR controller clk at 230~280 */
+			effective_data_rate = 266; /* 7.5ns */
+			if (spd.clk_cycle3 == 0x75) {
+				caslat = caslat - 2;
+			} else if (spd.clk_cycle2 == 0x60) {
+				caslat = caslat - 1;
+			} else {
+				caslat = caslat;
+			}
+		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
+			/* DDR controller clk at 90~230 */
+			effective_data_rate = 200; /* 10ns */
+			if (spd.clk_cycle3 == 0x75) {
+				caslat = caslat - 2;
+			} else if (spd.clk_cycle2 == 0x60) {
+				caslat = caslat - 1;
+			} else {
+				caslat = caslat;
+			}
+		}
 	} else if (max_data_rate >= 323) { /* it is DDR 333 */
 		if (ddrc_clk <= 350 && ddrc_clk > 280) {
-			/* DDRC clk at 280~350 */
+			/* DDR controller clk at 280~350 */
 			effective_data_rate = 333; /* 6ns */
 			caslat = caslat;
 		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
-			/* DDRC clk at 230~280 */
+			/* DDR controller clk at 230~280 */
+			effective_data_rate = 266; /* 7.5ns */
 			if (spd.clk_cycle2 == 0x75) {
-				effective_data_rate = 266; /* 7.5ns */
 				caslat = caslat - 1;
+			} else {
+				caslat = caslat;
 			}
 		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDRC clk at 90~230 */
+			/* DDR controller clk at 90~230 */
+			effective_data_rate = 200; /* 10ns */
 			if (spd.clk_cycle3 == 0xa0) {
-				effective_data_rate = 200; /* 10ns */
 				caslat = caslat - 2;
+			} else if (spd.clk_cycle2 == 0x75) {
+				caslat = caslat - 1;
+			} else {
+				caslat = caslat;
 			}
 		}
 	} else if (max_data_rate >= 256) { /* it is DDR 266 */
 		if (ddrc_clk <= 350 && ddrc_clk > 280) {
-			/* DDRC clk at 280~350 */
+			/* DDR controller clk at 280~350 */
 			printf("DDR: DDR controller freq is more than "
 				"max data rate of the module\n");
 			return 0;
 		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
-			/* DDRC clk at 230~280 */
+			/* DDR controller clk at 230~280 */
 			effective_data_rate = 266; /* 7.5ns */
 			caslat = caslat;
 		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDRC clk at 90~230 */
+			/* DDR controller clk at 90~230 */
+			effective_data_rate = 200; /* 10ns */
 			if (spd.clk_cycle2 == 0xa0) {
-				effective_data_rate = 200; /* 10ns */
 				caslat = caslat - 1;
 			}
 		}
 	} else if (max_data_rate >= 190) { /* it is DDR 200 */
 		if (ddrc_clk <= 350 && ddrc_clk > 230) {
-			/* DDRC clk at 230~350 */
+			/* DDR controller clk at 230~350 */
 			printf("DDR: DDR controller freq is more than "
 				"max data rate of the module\n");
 			return 0;
 		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
-			/* DDRC clk at 90~230 */
+			/* DDR controller clk at 90~230 */
 			effective_data_rate = 200; /* 10ns */
 			caslat = caslat;
 		}
 	}
 
-#ifdef CONFIG_MPC834X
-/* Errata DDR6
-   This errata affects all MPC8349E, MPC8343E and MPC8347E processors.
-*/
-	if ((tmp1 >= 280) && (tmp1 < 350)) /* CSB=333 */
-	{
-		if (spd.mid[0] == 0x2c) {
-			/* Micron memory running at 333 MHz */
-			/* Chances are, U-Boot will crash before we get here,
-			   but just in case, display a message and return error. */
-			printf("Micron DDR not supported at 333MHz CSB\n");
-			return 0;
-		} else if (spd.mid[0] == 0xad) {
-			printf("Hynix DDR does not require Errata DDR6\n");
-		} else {
-			/* enable 2 cycle Earlier for CL=2.5 or 3 */
-			ddr->debug_reg = 0x202c0000;
-			printf("Errata DDR6 (debug_reg=0x%x)\n", ddr->debug_reg);
-		}
-		caslat_83xx = caslat;
-	}
-
-	if ((tmp1 >= 230) && (tmp1 < 280)) {  /* CSB=266 */
-		if (spd.mid[0] != 0x2c) /* non-Micron */
-			caslat_83xx = caslat - 1;
+	debug("DDR:Effective data rate is: %dMhz\n", effective_data_rate);
+	debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
 
+	/*
+	 * Errata DDR6 work around: input enable 2 cycles earlier.
+	 * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
+	 */
+	if (caslat == 2) {
+		ddr->debug_reg = 0x201c0000; /* CL=2 */
+	} else if (caslat == 3) {
+		ddr->debug_reg = 0x202c0000; /* CL=2.5 */
+	} else if (caslat == 4) {
+		ddr->debug_reg = 0x202c0000; /* CL=3.0 */
 	}
+	__asm__ __volatile__ ("sync");
 
-	if ((tmp1 >= 90) && (tmp1 < 230)) {  /* CSB=200 */
-		caslat = 3;
-		caslat_83xx = 2;
-	}
-#endif
+	debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
 
 	/*
 	 * note: caslat must also be programmed into ddr->sdram_mode
@@ -353,11 +370,7 @@ long int spd_sdram()
 	    (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) |
 	     ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) |
 	     ((picos_to_clk(spd.trcd * 250) & 0x07) << 20 ) |
-#ifdef CONFIG_MPC834x
-	     ((caslat_83xx & 0x07) << 16 ) |
-#else
 	     ((caslat_ctrl & 0x07) << 16 ) |
-#endif
 	     (((picos_to_clk(spd.trfc * 1000) - 8) & 0x0f) << 12 ) |
 	     ( 0x300 ) |
 	     ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | 1);
@@ -370,13 +383,10 @@ long int spd_sdram()
 	ddr->sdram_cfg = 0x42000000;
 
 	/* Check DIMM data bus width */
-	if (spd.dataw_lsb == 0x20)
-	{
+	if (spd.dataw_lsb == 0x20) {
 		burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
 		printf("\n   DDR DIMM: data bus width is 32 bit");
-	}
-	else
-	{
+	} else {
 		burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
 		printf("\n   DDR DIMM: data bus width is 64 bit");
 	}
@@ -384,68 +394,67 @@ long int spd_sdram()
 	/* Is this an ECC DDR chip? */
 	if (spd.config == 0x02) {
 		printf(" with ECC\n");
-	}
-	else
+	} else {
 		printf(" without ECC\n");
+	}
 
 	/* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
 	   Burst type is sequential
 	 */
-	switch(caslat) {
-	case 1:
-		ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
-		break;
-	case 2:
-		ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
-		break;
-	case 3:
-		ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
-		break;
-	case 4:
-		ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
-		break;
-	default:
-		printf("DDR:only CAS Latency 1.5, 2.0, 2.5, 3.0 "
-					"is supported.\n");
-		return 0;
+	switch (caslat) {
+		case 1:
+			ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
+			break;
+		case 2:
+			ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
+			break;
+		case 3:
+			ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
+			break;
+		case 4:
+			ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
+			break;
+		default:
+			printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n");
+			return 0;
 	}
 	debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
 
-	switch(spd.refresh) {
-	case 0x00:
-	case 0x80:
-		tmp = picos_to_clk(15625000);
-		break;
-	case 0x01:
-	case 0x81:
-		tmp = picos_to_clk(3900000);
-		break;
-	case 0x02:
-	case 0x82:
-		tmp = picos_to_clk(7800000);
-		break;
-	case 0x03:
-	case 0x83:
-		tmp = picos_to_clk(31300000);
-		break;
-	case 0x04:
-	case 0x84:
-		tmp = picos_to_clk(62500000);
-		break;
-	case 0x05:
-	case 0x85:
-		tmp = picos_to_clk(125000000);
-		break;
-	default:
-		tmp = 0x512;
-		break;
+	switch (spd.refresh) {
+		case 0x00:
+		case 0x80:
+			refresh_clk = picos_to_clk(15625000);
+			break;
+		case 0x01:
+		case 0x81:
+			refresh_clk = picos_to_clk(3900000);
+			break;
+		case 0x02:
+		case 0x82:
+			refresh_clk = picos_to_clk(7800000);
+			break;
+		case 0x03:
+		case 0x83:
+			refresh_clk = picos_to_clk(31300000);
+			break;
+		case 0x04:
+		case 0x84:
+			refresh_clk = picos_to_clk(62500000);
+			break;
+		case 0x05:
+		case 0x85:
+			refresh_clk = picos_to_clk(125000000);
+			break;
+		default:
+			refresh_clk = 0x512;
+			break;
 	}
 
 	/*
 	 * Set BSTOPRE to 0x100 for page mode
 	 * If auto-charge is used, set BSTOPRE = 0
 	 */
-	ddr->sdram_interval = ((tmp & 0x3fff) << 16) | 0x100;
+	ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100;
 	debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
 
 	/* SS_EN = 0, source synchronous disable
@@ -459,8 +468,8 @@ long int spd_sdram()
 	udelay(600);
 
 	/*
-	 * Figure out the settings for the sdram_cfg register.  Build up
-	 * the entire register in 'tmp' before writing since the write into
+	 * Figure out the settings for the sdram_cfg register. Build up
+	 * the value in 'sdram_cfg' before writing since the write into
 	 * the register will actually enable the memory controller, and all
 	 * settings must be done before enabling.
 	 *
@@ -493,13 +502,13 @@ long int spd_sdram()
 		/* set single bit error threshold to maximum value,
 		 * reset counter to zero */
 		ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
-			(0 << ECC_ERROR_MAN_SBEC_SHIFT);
+				(0 << ECC_ERROR_MAN_SBEC_SHIFT);
 	}
 
 	debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
 	debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
 #endif
-	printf("   DDRC ECC mode: %s", ddrc_ecc_enable ? "ON":"OFF");
+	printf("   DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
 
 #if defined(CONFIG_DDR_2T_TIMING)
 	/*
@@ -517,7 +526,6 @@ long int spd_sdram()
 }
 #endif /* CONFIG_SPD_EEPROM */
 
-
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
 /*
  * Use timebase counter, get_timer() is not availabe
@@ -602,26 +610,16 @@ void ddr_enable_ecc(unsigned int dram_size)
 		}
 	}
 
-	/* 8K */
-	dma_xfer((uint *)0x2000, 0x2000, (uint *)0);
-	/* 16K */
-	dma_xfer((uint *)0x4000, 0x4000, (uint *)0);
-	/* 32K */
-	dma_xfer((uint *)0x8000, 0x8000, (uint *)0);
-	/* 64K */
-	dma_xfer((uint *)0x10000, 0x10000, (uint *)0);
-	/* 128k */
-	dma_xfer((uint *)0x20000, 0x20000, (uint *)0);
-	/* 256k */
-	dma_xfer((uint *)0x40000, 0x40000, (uint *)0);
-	/* 512k */
-	dma_xfer((uint *)0x80000, 0x80000, (uint *)0);
-	/* 1M */
-	dma_xfer((uint *)0x100000, 0x100000, (uint *)0);
-	/* 2M */
-	dma_xfer((uint *)0x200000, 0x200000, (uint *)0);
-	/* 4M */
-	dma_xfer((uint *)0x400000, 0x400000, (uint *)0);
+	dma_xfer((uint *)0x2000, 0x2000, (uint *)0); /* 8K */
+	dma_xfer((uint *)0x4000, 0x4000, (uint *)0); /* 16K */
+	dma_xfer((uint *)0x8000, 0x8000, (uint *)0); /* 32K */
+	dma_xfer((uint *)0x10000, 0x10000, (uint *)0); /* 64K */
+	dma_xfer((uint *)0x20000, 0x20000, (uint *)0); /* 128K */
+	dma_xfer((uint *)0x40000, 0x40000, (uint *)0); /* 256K */
+	dma_xfer((uint *)0x80000, 0x80000, (uint *)0); /* 512K */
+	dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */
+	dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */
+	dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */
 
 	for (i = 1; i < dram_size / 0x800000; i++) {
 		dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0);
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 412713f322..31fcadd1ea 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2000-2002
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -104,79 +104,52 @@ int get_clocks (void)
 	u32 lcrr;
 
 	u32 csb_clk;
+#if defined(CONFIG_MPC8349)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
-	u32 core_clk;
 	u32 usbmph_clk;
 	u32 usbdr_clk;
-	u32 i2c_clk;
+#endif
+	u32 core_clk;
+	u32 i2c1_clk;
+	u32 i2c2_clk;
 	u32 enc_clk;
 	u32 lbiu_clk;
 	u32 lclk_clk;
 	u32 ddr_clk;
+#if defined (CONFIG_MPC8360)
+	u32 qepmf;
+	u32 qepdf;
+	u32 ddr_sec_clk;
+	u32 qe_clk;
+	u32 brg_clk;
+#endif
 
 	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
 		return -1;
 
-#ifndef CFG_HRCW_HIGH
-# error "CFG_HRCW_HIGH must be defined in board config file"
-#endif /* CFG_HCWD_HIGH */
-
-#if (CFG_HRCW_HIGH & HRCWH_PCI_HOST)
-
-# ifndef CONFIG_83XX_CLKIN
-#  error "In PCI Host Mode, CONFIG_83XX_CLKIN must be defined in board config file"
-# endif /* CONFIG_83XX_CLKIN */
-# ifdef CONFIG_83XX_PCICLK
-#  warning "In PCI Host Mode, CONFIG_83XX_PCICLK in board config file is igonred"
-# endif /* CONFIG_83XX_PCICLK */
-
-	/* PCI Host Mode */
-	if (!(im->reset.rcwh & RCWH_PCIHOST)) {
-		/* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH
-		 * the im->reset.rcwhr PCI Host Mode is disabled
-		 * FIXME: findout if there is a way to issue some warning */
-		return -2;
-	}
-	if (im->clk.spmr & SPMR_CKID) {
-		/* PCI Clock is half CONFIG_83XX_CLKIN */
-		pci_sync_in = CONFIG_83XX_CLKIN / 2;
-	}
-	else {
-		pci_sync_in = CONFIG_83XX_CLKIN;
-	}
-
-#else /* (CFG_HRCW_HIGH & HRCWH_PCI_HOST) */
-
-# ifdef CONFIG_83XX_CLKIN
-#  warning "In PCI Agent Mode, CONFIG_83XX_CLKIN in board config file is igonred"
-# endif /* CONFIG_83XX_CLKIN */
-# ifndef CONFIG_83XX_PCICLK
-#  error "In PCI Agent Mode, CONFIG_83XX_PCICLK must be defined in board config file"
-# endif /* CONFIG_83XX_PCICLK */
+	clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
 
-	/* PCI Agent Mode */
-	if (im->reset.rcwh & RCWH_PCIHOST) {
-		/* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH
-		 * the im->reset.rcwhr PCI Host Mode is enabled */
-		return -3;
+	if (im->reset.rcwh & HRCWH_PCI_HOST) {
+#if defined(CONFIG_83XX_CLKIN)
+		pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div);
+#else
+		pci_sync_in = 0xDEADBEEF;
+#endif
+	} else {
+#if defined(CONFIG_83XX_PCICLK)
+		pci_sync_in = CONFIG_83XX_PCICLK;
+#else
+		pci_sync_in = 0xDEADBEEF;
+#endif
 	}
-	pci_sync_in = CONFIG_83XX_PCICLK;
-
-#endif /* (CFG_HRCW_HIGH | RCWH_PCIHOST) */
 
-	/* we have up to date pci_sync_in */
 	spmf = ((im->reset.rcwl & RCWL_SPMF) >> RCWL_SPMF_SHIFT);
-	clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
-
-	if ((im->reset.rcwl & RCWL_LBIUCM) || (im->reset.rcwl & RCWL_DDRCM)) {
-		csb_clk	= (pci_sync_in * spmf * (1 + clkin_div)) / 2;
-	}
-	else {
-		csb_clk = pci_sync_in * spmf * (1 + clkin_div);
-	}
+	csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
 
 	sccr = im->clk.sccr;
+
+#if defined(CONFIG_MPC8349)
 	switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
 	case 0:
 		tsec1_clk = 0;
@@ -212,25 +185,8 @@ int get_clocks (void)
 		/* unkown SCCR_TSEC2CM value */
 		return -5;
 	}
-	i2c_clk = tsec2_clk;
 
-	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
-	case 0:
-		enc_clk = 0;
-		break;
-	case 1:
-		enc_clk = csb_clk;
-		break;
-	case 2:
-		enc_clk = csb_clk / 2;
-		break;
-	case 3:
-		enc_clk = csb_clk / 3;
-		break;
-	default:
-		/* unkown SCCR_ENCCM value */
-		return -6;
-	}
+	i2c1_clk = tsec2_clk;
 
 	switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
 	case 0:
@@ -274,8 +230,34 @@ int get_clocks (void)
 		/* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */
 		return -9;
 	}
+#endif
+#if defined (CONFIG_MPC8360)
+	i2c1_clk = csb_clk;
+#endif
+	i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
 
+	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+	case 0:
+		enc_clk = 0;
+		break;
+	case 1:
+		enc_clk = csb_clk;
+		break;
+	case 2:
+		enc_clk = csb_clk / 2;
+		break;
+	case 3:
+		enc_clk = csb_clk / 3;
+		break;
+	default:
+		/* unkown SCCR_ENCCM value */
+		return -6;
+	}
+#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
 	lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+#else
+#error Unknown MPC83xx chip
+#endif
 	lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
 	switch (lcrr) {
 	case 2:
@@ -287,10 +269,16 @@ int get_clocks (void)
 		/* unknown lcrr */
 		return -10;
 	}
-
+#if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
 	ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
-
 	corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT;
+#if defined (CONFIG_MPC8360)
+	ddr_sec_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+#endif
+#else
+#error Unknown MPC83xx chip
+#endif
+
 	corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
 	if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) {
 		/* corecnf_tab_index is too high, possibly worng value */
@@ -319,22 +307,36 @@ int get_clocks (void)
 		return -12;
 	}
 
-	gd->csb_clk    = csb_clk   ;
-	gd->tsec1_clk  = tsec1_clk ;
-	gd->tsec2_clk  = tsec2_clk ;
-	gd->core_clk   = core_clk  ;
-	gd->usbmph_clk = usbmph_clk;
-	gd->usbdr_clk  = usbdr_clk ;
-	gd->i2c_clk    = i2c_clk   ;
-	gd->enc_clk    = enc_clk   ;
-	gd->lbiu_clk   = lbiu_clk  ;
-	gd->lclk_clk   = lclk_clk  ;
-	gd->ddr_clk    = ddr_clk   ;
-	gd->pci_clk    = pci_sync_in;
-
-	gd->cpu_clk = gd->core_clk;
-	gd->bus_clk = gd->lbiu_clk;
+#if defined (CONFIG_MPC8360)
+	qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT;
+	qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT;
+	qe_clk = (pci_sync_in * qepmf)/(1+qepdf);
+	brg_clk = qe_clk / 2;
+#endif
+
+	gd->csb_clk     = csb_clk;
+#if defined(CONFIG_MPC8349)
+	gd->tsec1_clk   = tsec1_clk;
+	gd->tsec2_clk   = tsec2_clk;
+	gd->usbmph_clk  = usbmph_clk;
+	gd->usbdr_clk   = usbdr_clk;
+#endif
+	gd->core_clk    = core_clk;
+	gd->i2c1_clk    = i2c1_clk;
+	gd->i2c2_clk    = i2c2_clk;
+	gd->enc_clk     = enc_clk;
+	gd->lbiu_clk    = lbiu_clk;
+	gd->lclk_clk    = lclk_clk;
+	gd->ddr_clk     = ddr_clk;
+#if defined (CONFIG_MPC8360)
+	gd->ddr_sec_clk = ddr_sec_clk;
+	gd->qe_clk      = qe_clk;
+	gd->brg_clk     = brg_clk;
+#endif
+	gd->cpu_clk     = gd->core_clk;
+	gd->bus_clk     = gd->csb_clk;
 	return 0;
+
 }
 
 ulong get_ddr_clk(ulong dummy)
@@ -357,14 +359,23 @@ int print_clock_conf (void)
 	printf("Clock configuration:\n");
 	printf("  Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
 	printf("  Core:                %4d MHz\n",gd->core_clk/1000000);
-	debug("  Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000);
+#if defined (CONFIG_MPC8360)
+	printf("  QE:                  %4d MHz\n",gd->qe_clk/1000000);
+#endif
+	printf("  Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000);
 	printf("  Local Bus:           %4d MHz\n",gd->lclk_clk/1000000);
-	debug("  DDR:                 %4d MHz\n",gd->ddr_clk/1000000);
-	debug("  I2C:                 %4d MHz\n",gd->i2c_clk/1000000);
-	debug("  TSEC1:               %4d MHz\n",gd->tsec1_clk/1000000);
-	debug("  TSEC2:               %4d MHz\n",gd->tsec2_clk/1000000);
-	debug("  USB MPH:             %4d MHz\n",gd->usbmph_clk/1000000);
-	debug("  USB DR:              %4d MHz\n",gd->usbdr_clk/1000000);
-
+	printf("  DDR:                 %4d MHz\n",gd->ddr_clk/1000000);
+#if defined (CONFIG_MPC8360)
+	printf("  DDR Secondary:       %4d MHz\n",gd->ddr_sec_clk/1000000);
+#endif
+	printf("  SEC:                 %4d MHz\n",gd->enc_clk/1000000);
+	printf("  I2C1:                %4d MHz\n",gd->i2c1_clk/1000000);
+	printf("  I2C2:                %4d MHz\n",gd->i2c2_clk/1000000);
+#if defined(CONFIG_MPC8349)
+	printf("  TSEC1:               %4d MHz\n",gd->tsec1_clk/1000000);
+	printf("  TSEC2:               %4d MHz\n",gd->tsec2_clk/1000000);
+	printf("  USB MPH:             %4d MHz\n",gd->usbmph_clk/1000000);
+	printf("  USB DR:              %4d MHz\n",gd->usbdr_clk/1000000);
+#endif
 	return 0;
 }
-- 
cgit v1.2.1


From 7737d5c658c606f999dfbe3e86b0fed49e5c50ef Mon Sep 17 00:00:00 2001
From: Dave Liu <daveliu@freescale.com>
Date: Fri, 3 Nov 2006 12:11:15 -0600
Subject: mpc83xx: add QE ethernet support

this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
---
 cpu/mpc83xx/Makefile   |  2 +-
 cpu/mpc83xx/cpu_init.c | 40 ++++++++++++++++++++----
 cpu/mpc83xx/qe_io.c    | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 120 insertions(+), 7 deletions(-)
 create mode 100644 cpu/mpc83xx/qe_io.c

(limited to 'cpu')

diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index 1aa0005d4d..e254ef98f6 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -29,7 +29,7 @@ LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
 COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
-	  i2c.o spd_sdram.o
+	  i2c.o spd_sdram.o qe_io.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 999fe71964..eb8f8c042f 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -31,6 +31,30 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_QE
+extern qe_iop_conf_t qe_iop_conf_tab[];
+extern void qe_config_iopin(u8 port, u8 pin, int dir,
+			 int open_drain, int assign);
+extern void qe_init(uint qe_base);
+extern void qe_reset(void);
+
+static void config_qe_ioports(void)
+{
+	u8	port, pin;
+	int	dir, open_drain, assign;
+	int	i;
+
+	for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
+		port		= qe_iop_conf_tab[i].port;
+		pin		= qe_iop_conf_tab[i].pin;
+		dir		= qe_iop_conf_tab[i].dir;
+		open_drain	= qe_iop_conf_tab[i].open_drain;
+		assign		= qe_iop_conf_tab[i].assign;
+		qe_config_iopin(port, pin, dir, open_drain, assign);
+	}
+}
+#endif
+
 /*
  * Breathe some life into the CPU...
  *
@@ -100,6 +124,10 @@ void cpu_init_f (volatile immap_t * im)
 #ifdef CFG_SICRL
 	im->sysconf.sicrl = CFG_SICRL;
 #endif
+#ifdef CONFIG_QE
+	/* Config QE ioports */
+	config_qe_ioports();
+#endif
 
 	/*
 	 * Memory Controller:
@@ -188,12 +216,12 @@ void cpu_init_f (volatile immap_t * im)
 #endif
 }
 
-
-/*
- * Initialize higher level parts of CPU like time base and timers.
- */
-
 int cpu_init_r (void)
 {
+#ifdef CONFIG_QE
+	uint qe_base = CFG_IMMRBAR + 0x00100000; /* QE immr base */
+	qe_init(qe_base);
+	qe_reset();
+#endif
 	return 0;
 }
diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c
new file mode 100644
index 0000000000..11cf3722bd
--- /dev/null
+++ b/cpu/mpc83xx/qe_io.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on source code of Shlomi Gridish
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "common.h"
+#include "asm/errno.h"
+#include "asm/io.h"
+#include "asm/immap_83xx.h"
+
+#if defined(CONFIG_QE)
+#define	NUM_OF_PINS	32
+void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
+{
+	u32			pin_2bit_mask;
+	u32			pin_2bit_dir;
+	u32			pin_2bit_assign;
+	u32			pin_1bit_mask;
+	u32			tmp_val;
+	volatile immap_t	*im = (volatile immap_t *)CFG_IMMRBAR;
+	volatile gpio83xx_t	*par_io =(volatile gpio83xx_t *)&im->gpio;
+
+	/* Caculate pin location and 2bit mask and dir */
+	pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+	pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+
+	/* Setup the direction */
+	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
+		in_be32(&par_io->ioport[port].dir2) :
+		in_be32(&par_io->ioport[port].dir1);
+
+	if (pin > (NUM_OF_PINS/2) -1) {
+		out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val);
+	} else {
+		out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val);
+	}
+
+	/* Calculate pin location for 1bit mask */
+	pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
+
+	/* Setup the open drain */
+	tmp_val = in_be32(&par_io->ioport[port].podr);
+	if (open_drain) {
+		out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val);
+	} else {
+		out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val);
+	}
+
+	/* Setup the assignment */
+	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
+		in_be32(&par_io->ioport[port].ppar2):
+		in_be32(&par_io->ioport[port].ppar1);
+	pin_2bit_assign = (u32)(assign
+				<< (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
+
+	/* Clear and set 2 bits mask */
+	if (pin > (NUM_OF_PINS/2) - 1) {
+		out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val);
+	} else {
+		out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
+	}
+}
+
+#endif /* CONFIG_QE */
-- 
cgit v1.2.1


From 9ca880a250870a7d55754291b5591d2b5fe89b54 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 31 Oct 2006 21:23:16 -0600
Subject: mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS,
 TQM834x, and MPC8360EMDS

This patch also adds an improved I2C set_speed(), which handles all clock
frequencies.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 cpu/mpc83xx/i2c.c | 214 +++++++++++++++++++++++++++++++++---------------------
 1 file changed, 130 insertions(+), 84 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c
index fc89fb1e25..ce78491616 100644
--- a/cpu/mpc83xx/i2c.c
+++ b/cpu/mpc83xx/i2c.c
@@ -47,75 +47,121 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* Three I2C bus speeds are supported here (50kHz, 100kHz
- * and 400kHz).  It should be easy to add more.  Note that
- * the maximum bus speed for I2C bus 1 is CSB/3, while I2C
- * bus 2 can go as high as CSB.
- * Typical values for CSB are 266MHz and 200MHz.  */
-
-                                                                      /* 50kH  100kHz  400kHz */
-static const uchar speed_map_266[][3] =
-                                                                      {{0x2e,         0x2a,   0x20},  /* base 88MHz */
-                                                                       {0x34,         0x30,   0x28}}; /* base 266 MHz */
-
-static const uchar speed_map_200[][3] =
-                                                                      {{0x2c,         0x28,   0x20},  /* base 66 MHz */
-                                                                       {0x33,         0x2f,   0x26}}; /* base 200 MHz */
-
 /* Initialize the bus pointer to whatever one the SPD EEPROM is on.
  * Default is bus 1.  This is necessary because the DDR initialization
  * runs from ROM, and we can't switch buses because we can't modify
  * the i2c_dev variable.  Everything gets straightened out once i2c_init
  * is called from RAM.  */
 
-#if defined CFG_SPD_BUS_NUM
-static i2c_t *i2c_dev = CFG_SPD_BUS_NUM;
+#ifndef CFG_SPD_BUS_NUM
+#define CFG_SPD_BUS_NUM 1
+#endif
+
+static unsigned int i2c_bus_num = CFG_SPD_BUS_NUM;
+
+#if CFG_SPD_BUS_NUM == 1
+static volatile i2c_t *i2c_dev = I2C_1;
 #else
-static i2c_t *i2c_dev = I2C_1;
+static volatile i2c_t *i2c_dev = I2C_2;
 #endif
 
-static uchar busNum = I2C_BUS_1 ;
-static int bus_speed[2] = {0, 0};
+static int i2c_bus_speed[2] = {0, 0};
 
-static int set_speed(int speed)
+/*
+ * Map the frequency divider to the FDR.  This data is taken from table 17-5
+ * of the MPC8349EA reference manual, with duplicates removed.
+ */
+static struct {
+    unsigned int divider;
+    u8 fdr;
+} i2c_speed_map[] =
 {
-      uchar value;
-      const uchar *spdPtr;
-
-      /* Global data contains maximum I2C bus 1 speed, which is CSB/3 */
-      if(gd->i2c_clk == 88000000)
-      {
-              spdPtr = speed_map_266[busNum];
-      }
-      else if(gd->i2c_clk == 66000000)
-      {
-              spdPtr = speed_map_200[busNum];
-      }
-      else
-      {
-              printf("Max I2C bus speed %d not supported\n", gd->i2c_clk);
-              return -1;
-      }
-
-      switch(speed)
-      {
-              case 50000:
-                      value   = *(spdPtr + 0);
-                      break;
-              case 100000:
-                      value   = *(spdPtr + 1);
-                      break;
-              case 400000:
-                      value   = *(spdPtr + 2);
-                      break;
-              default:
-                      printf("I2C bus speed %d not supported\n", speed);
-                      return -2;
-      }
-      /* set clock */
-      writeb(value, &i2c_dev->fdr);
-      bus_speed[busNum] = speed;
-      return 0;
+	{0, 0x20},
+	{256, 0x20},
+	{288, 0x21},
+	{320, 0x22},
+	{352, 0x23},
+	{384, 0x24},
+	{416, 0x01},
+	{448, 0x25},
+	{480, 0x02},
+	{512, 0x26},
+	{576, 0x27},
+	{640, 0x28},
+	{704, 0x05},
+	{768, 0x29},
+	{832, 0x06},
+	{896, 0x2A},
+	{1024, 0x2B},
+	{1152, 0x08},
+	{1280, 0x2C},
+	{1536, 0x2D},
+	{1792, 0x2E},
+	{1920, 0x0B},
+	{2048, 0x2F},
+	{2304, 0x0C},
+	{2560, 0x30},
+	{3072, 0x31},
+	{3584, 0x32},
+	{3840, 0x0F},
+	{4096, 0x33},
+	{4608, 0x10},
+	{5120, 0x34},
+	{6144, 0x35},
+	{7168, 0x36},
+	{7680, 0x13},
+	{8192, 0x37},
+	{9216, 0x14},
+	{10240, 0x38},
+	{12288, 0x39},
+	{14336, 0x3A},
+	{15360, 0x17},
+	{16384, 0x3B},
+	{18432, 0x18},
+	{20480, 0x3C},
+	{24576, 0x3D},
+	{28672, 0x3E},
+	{30720, 0x1B},
+	{32768, 0x3F},
+	{36864, 0x1C},
+	{40960, 0x1D},
+	{49152, 0x1E},
+	{61440, 0x1F},
+	{-1, 0x1F}
+};
+
+#define NUM_I2C_SPEEDS (sizeof(i2c_speed_map) / sizeof(i2c_speed_map[0]))
+
+static int set_speed(unsigned int speed)
+{
+	unsigned long i2c_clk;
+	unsigned int divider, i;
+	u8 fdr = 0x3F;
+
+	i2c_clk = (i2c_bus_num == 2) ? gd->i2c2_clk : gd->i2c1_clk;
+
+	divider = i2c_clk / speed;
+
+	/* Scan i2c_speed_map[] for the closest matching divider.*/
+
+	for (i = 0; i < NUM_I2C_SPEEDS-1; i++) {
+		/* Locate our divider in between two entries in i2c_speed_map[] */
+		if ((divider >= i2c_speed_map[i].divider) &&
+		    (divider <= i2c_speed_map[i+1].divider)) {
+			/* Which one is closer? */
+			if ((divider - i2c_speed_map[i].divider) < (i2c_speed_map[i+1].divider - divider)) {
+				fdr = i2c_speed_map[i].fdr;
+			} else {
+				fdr = i2c_speed_map[i+1].fdr;
+			}
+			break;
+		}
+	}
+
+	writeb(fdr, &i2c_dev->fdr);
+	i2c_bus_speed[i2c_bus_num - 1] = speed;
+
+	return 0;
 }
 
 
@@ -125,16 +171,16 @@ static void _i2c_init(int speed, int slaveadd)
 	writeb(0x00 , &i2c_dev->cr);
 
 	/* set clock */
-	writeb(speed, &i2c_dev->fdr);
+	set_speed(speed);
 
 	/* set default filter */
-	writeb(0x10,&i2c_dev->dfsrr);
+	writeb(IC2_FDR,&i2c_dev->dfsrr);
 
 	/* write slave address */
 	writeb(slaveadd, &i2c_dev->adr);
 
 	/* clear status register */
-	writeb(0x00, &i2c_dev->sr);
+	writeb(I2C_CR_MTX, &i2c_dev->sr);
 
 	/* start I2C controller */
 	writeb(I2C_CR_MEN, &i2c_dev->cr);
@@ -142,19 +188,19 @@ static void _i2c_init(int speed, int slaveadd)
 
 void i2c_init(int speed, int slaveadd)
 {
-      /* Set both interfaces to the same speed and slave address */
-      /* Note: This function gets called twice - before and after
-       * relocation to RAM.  The first time it's called, we are unable
-       * to change buses, so whichever one 'i2c_dev' was initialized to
-       * gets set twice.  When run from RAM both buses get set properly */
-
-      i2c_set_bus_num(I2C_BUS_1);
-      _i2c_init(speed, slaveadd);
-#ifdef        CFG_I2C2_OFFSET
-      i2c_set_bus_num(I2C_BUS_2);
-      _i2c_init(speed, slaveadd);
-      i2c_set_bus_num(I2C_BUS_1);
-#endif        /* CFG_I2C2_OFFSET */
+	/* Set both interfaces to the same speed and slave address */
+	/* Note: This function gets called twice - before and after
+	 * relocation to RAM.  The first time it's called, we are unable
+	 * to change buses, so whichever one 'i2c_dev' was initialized to
+	 * gets set twice.  When run from RAM both buses get set properly */
+
+	i2c_set_bus_num(1);
+	_i2c_init(speed, slaveadd);
+#ifdef	CFG_I2C2_OFFSET
+	i2c_set_bus_num(2);
+	_i2c_init(speed, slaveadd);
+	i2c_set_bus_num(1);
+#endif	/* CFG_I2C2_OFFSET */
 }
 
 static __inline__ int
@@ -340,38 +386,38 @@ void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
 	i2c_write (i2c_addr, reg, 1, &val, 1);
 }
 
-int 	i2c_set_bus_num(uchar bus)
+int i2c_set_bus_num(unsigned int bus)
 {
-	if(bus == I2C_BUS_1)
+	if(bus == 1)
 	{
 		i2c_dev = I2C_1;
 	}
 #ifdef	CFG_I2C2_OFFSET
-	else if(bus == I2C_BUS_2)
+	else if(bus == 2)
 	{
 		i2c_dev = I2C_2;
 	}
-#endif	/* CFG_I2C2_OFFSET */
+#endif
 	else
 	{
 		return -1;
 	}
-	busNum = bus;
+	i2c_bus_num = bus;
 	return 0;
 }
 
-int 	i2c_set_bus_speed(int speed)
+int i2c_set_bus_speed(unsigned int speed)
 {
 	return set_speed(speed);
 }
 
-uchar i2c_get_bus_num(void)
+unsigned int i2c_get_bus_num(void)
 {
-	return busNum;
+	return i2c_bus_num;
 }
 
-int 	i2c_get_bus_speed(void)
+unsigned int i2c_get_bus_speed(void)
 {
-	return bus_speed[busNum];
+	return i2c_bus_speed[i2c_bus_num - 1];
 }
 #endif /* CONFIG_HARD_I2C */
-- 
cgit v1.2.1


From 48041365b3420589ad464ebc7752e0053538b729 Mon Sep 17 00:00:00 2001
From: Kim Phillips <kim.phillips@freescale.com>
Date: Wed, 1 Nov 2006 00:07:25 -0600
Subject: mpc83xx: change ft code to modify local-mac-address property

Update 83xx OF code to update local-mac-address properties
for ethernet instead of the obsolete 'address' property.
---
 cpu/mpc83xx/cpu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 1de337b33c..3d8ca772c6 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -297,12 +297,12 @@ ft_cpu_setup(void *blob, bd_t *bd)
 		*p = cpu_to_be32(clock);
 
 #ifdef CONFIG_MPC83XX_TSEC1
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len);
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
 		memcpy(p, bd->bi_enetaddr, 6);
 #endif
 
 #ifdef CONFIG_MPC83XX_TSEC2
-	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len);
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
 		memcpy(p, bd->bi_enet1addr, 6);
 #endif
 }
-- 
cgit v1.2.1


From 90f30a710a3c619b5405860a686c4ddfc495d4b6 Mon Sep 17 00:00:00 2001
From: Dave Liu <daveliu@freescale.com>
Date: Thu, 2 Nov 2006 18:05:50 -0600
Subject: mpc83xx: Fix the incorrect dcbz operation

The 834x rev1.x silicon has one CPU5 errata.

The issue is when the data cache locked with
HID0[DLOCK], the dcbz instruction looks like no-op inst.

The right behavior of the data cache is when the data cache
Locked with HID0[DLOCK], the dcbz instruction allocates
new tags in cache.

The 834x rev3.0 and later and 8360 have not this bug inside.

So, when 834x rev3.0/8360 are working with ECC, the dcbz
instruction will corrupt the stack in cache, the processor will
checkstop reset.

However, the 834x rev1.x can work with ECC with these code,
because the sillicon has this cache bug. The dcbz will not
corrupt the stack in cache.
Really, it is the fault code running on fault sillicon.

This patch fix the incorrect dcbz operation. Instead of
CPU FP writing to initialise the ECC.

CHANGELOG:
* Fix the incorrect dcbz operation instead of CPU FP
writing to initialise the ECC memory. Otherwise, it
will corrupt the stack in cache, The processor will checkstop
reset.

Signed-off-by: Dave Liu <daveliu@freescale.com>
---
 cpu/mpc83xx/spd_sdram.c | 52 +++++++++++++++++--------------------------------
 cpu/mpc83xx/start.S     | 12 ++++++++++++
 2 files changed, 30 insertions(+), 34 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index acc8c9e79b..b91c6130e7 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -562,54 +562,38 @@ static __inline__ unsigned long get_tbms (void)
 /* #define CONFIG_DDR_ECC_INIT_VIA_DMA */
 void ddr_enable_ecc(unsigned int dram_size)
 {
-	uint *p;
 	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
 	volatile ddr83xx_t *ddr= &immap->ddr;
 	unsigned long t_start, t_end;
+	register u64 *p;
+	register uint size;
+	unsigned int pattern[2];
 #if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
 	uint i;
 #endif
-
-	debug("Initialize a Cachline in DRAM\n");
 	icache_enable();
-
-#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
-	/* Initialise DMA for direct Transfers */
-	dma_init();
-#endif
-
 	t_start = get_tbms();
+	pattern[0] = 0xdeadbeef;
+	pattern[1] = 0xdeadbeef;
 
 #if !defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
-	debug("DDR init: Cache flush method\n");
-	for (p = 0; p < (uint *)(dram_size); p++) {
-		if (((unsigned int)p & 0x1f) == 0) {
-			ppcDcbz((unsigned long) p);
-		}
-
-		/* write pattern to cache and flush */
-		*p = (unsigned int)0xdeadbeef;
-
-		if (((unsigned int)p & 0x1c) == 0x1c) {
-			ppcDcbf((unsigned long) p);
-		}
+	debug("ddr init: CPU FP write method\n");
+	size = dram_size;
+	for (p = 0; p < (u64*)(size); p++) {
+		ppcDWstore((u32*)p, pattern);
 	}
+	__asm__ __volatile__ ("sync");
 #else
-	printf("DDR init: DMA method\n");
-	for (p = 0; p < (uint *)(8 * 1024); p++) {
-		/* zero one data cache line */
-		if (((unsigned int)p & 0x1f) == 0) {
-			ppcDcbz((unsigned long)p);
-		}
-
-		/* write pattern to it and flush */
-		*p = (unsigned int)0xdeadbeef;
-
-		if (((unsigned int)p & 0x1c) == 0x1c) {
-			ppcDcbf((unsigned long)p);
-		}
+	debug("ddr init: DMA method\n");
+	size = 0x2000;
+	for (p = 0; p < (u64*)(size); p++) {
+		ppcDWstore((u32*)p, pattern);
 	}
+	__asm__ __volatile__ ("sync");
 
+	/* Initialise DMA for direct transfer */
+	dma_init();
+	/* Start DMA to transfer */
 	dma_xfer((uint *)0x2000, 0x2000, (uint *)0); /* 8K */
 	dma_xfer((uint *)0x4000, 0x4000, (uint *)0); /* 16K */
 	dma_xfer((uint *)0x8000, 0x8000, (uint *)0); /* 32K */
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index a7ed3c5b2c..c43835c8dc 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -870,6 +870,18 @@ ppcDcbz:
 	dcbz	r0,r3
 	blr
 
+	.globl	ppcDWstore
+ppcDWstore:
+	lfd	1, 0(r4)
+	stfd	1, 0(r3)
+	blr
+
+	.globl	ppcDWload
+ppcDWload:
+	lfd	1, 0(r3)
+	stfd	1, 0(r4)
+	blr
+
 /*-------------------------------------------------------------------*/
 
 /*
-- 
cgit v1.2.1


From f7fb2e703ec9688541416962724adff70a7322cb Mon Sep 17 00:00:00 2001
From: Kim Phillips <kim.phillips@freescale.com>
Date: Thu, 2 Nov 2006 19:47:11 -0600
Subject: mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c

---
 cpu/mpc83xx/speed.c | 161 ++++++++++++++++++++++++++--------------------------
 1 file changed, 82 insertions(+), 79 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 31fcadd1ea..1e082a7868 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -53,38 +53,38 @@ typedef enum {
 
 typedef struct {
 	mult_t core_csb_ratio;
-	mult_t  vco_divider;
+	mult_t vco_divider;
 } corecnf_t;
 
 corecnf_t corecnf_tab[] = {
-	{ _byp, _byp},	/* 0x00 */
-	{ _byp, _byp},	/* 0x01 */
-	{ _byp, _byp},	/* 0x02 */
-	{ _byp, _byp},	/* 0x03 */
-	{ _byp, _byp},	/* 0x04 */
-	{ _byp, _byp},	/* 0x05 */
-	{ _byp, _byp},	/* 0x06 */
-	{ _byp, _byp},	/* 0x07 */
-	{  _1x,  _x2},	/* 0x08 */
-	{  _1x,  _x4},	/* 0x09 */
-	{  _1x,  _x8},	/* 0x0A */
-	{  _1x,  _x8},	/* 0x0B */
-	{_1_5x,  _x2},	/* 0x0C */
-	{_1_5x,  _x4},	/* 0x0D */
-	{_1_5x,  _x8},	/* 0x0E */
-	{_1_5x,  _x8},	/* 0x0F */
-	{  _2x,  _x2},	/* 0x10 */
-	{  _2x,  _x4},	/* 0x11 */
-	{  _2x,  _x8},	/* 0x12 */
-	{  _2x,  _x8},	/* 0x13 */
-	{_2_5x,  _x2},	/* 0x14 */
-	{_2_5x,  _x4},	/* 0x15 */
-	{_2_5x,  _x8},	/* 0x16 */
-	{_2_5x,  _x8},	/* 0x17 */
-	{  _3x,  _x2},	/* 0x18 */
-	{  _3x,  _x4},	/* 0x19 */
-	{  _3x,  _x8},	/* 0x1A */
-	{  _3x,  _x8},	/* 0x1B */
+	{_byp, _byp},		/* 0x00 */
+	{_byp, _byp},		/* 0x01 */
+	{_byp, _byp},		/* 0x02 */
+	{_byp, _byp},		/* 0x03 */
+	{_byp, _byp},		/* 0x04 */
+	{_byp, _byp},		/* 0x05 */
+	{_byp, _byp},		/* 0x06 */
+	{_byp, _byp},		/* 0x07 */
+	{_1x, _x2},		/* 0x08 */
+	{_1x, _x4},		/* 0x09 */
+	{_1x, _x8},		/* 0x0A */
+	{_1x, _x8},		/* 0x0B */
+	{_1_5x, _x2},		/* 0x0C */
+	{_1_5x, _x4},		/* 0x0D */
+	{_1_5x, _x8},		/* 0x0E */
+	{_1_5x, _x8},		/* 0x0F */
+	{_2x, _x2},		/* 0x10 */
+	{_2x, _x4},		/* 0x11 */
+	{_2x, _x8},		/* 0x12 */
+	{_2x, _x8},		/* 0x13 */
+	{_2_5x, _x2},		/* 0x14 */
+	{_2_5x, _x4},		/* 0x15 */
+	{_2_5x, _x8},		/* 0x16 */
+	{_2_5x, _x8},		/* 0x17 */
+	{_3x, _x2},		/* 0x18 */
+	{_3x, _x4},		/* 0x19 */
+	{_3x, _x8},		/* 0x1A */
+	{_3x, _x8},		/* 0x1B */
 };
 
 /* ----------------------------------------------------------------- */
@@ -92,15 +92,15 @@ corecnf_t corecnf_tab[] = {
 /*
  *
  */
-int get_clocks (void)
+int get_clocks(void)
 {
-	volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+	volatile immap_t *im = (immap_t *) CFG_IMMRBAR;
 	u32 pci_sync_in;
-	u8  spmf;
-	u8  clkin_div;
+	u8 spmf;
+	u8 clkin_div;
 	u32 sccr;
 	u32 corecnf_tab_index;
-	u8  corepll;
+	u8 corepll;
 	u32 lcrr;
 
 	u32 csb_clk;
@@ -125,7 +125,7 @@ int get_clocks (void)
 	u32 brg_clk;
 #endif
 
-	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
 		return -1;
 
 	clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
@@ -224,17 +224,18 @@ int get_clocks (void)
 		return -8;
 	}
 
-	if (usbmph_clk != 0
-		&& usbdr_clk != 0
-		&& usbmph_clk != usbdr_clk ) {
-		/* if USB MPH clock is not disabled and USB DR clock is not disabled than USB MPH & USB DR must have the same rate */
+	if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
+		/* if USB MPH clock is not disabled and
+		 * USB DR clock is not disabled then
+		 * USB MPH & USB DR must have the same rate
+		 */
 		return -9;
 	}
 #endif
 #if defined (CONFIG_MPC8360)
 	i2c1_clk = csb_clk;
 #endif
-	i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
+	i2c2_clk = csb_clk;	/* i2c-2 clk is equal to csb clk */
 
 	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
 	case 0:
@@ -254,7 +255,8 @@ int get_clocks (void)
 		return -6;
 	}
 #if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
-	lbiu_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+	lbiu_clk = csb_clk *
+	           (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
 #else
 #error Unknown MPC83xx chip
 #endif
@@ -270,17 +272,19 @@ int get_clocks (void)
 		return -10;
 	}
 #if defined(CONFIG_MPC8349) || defined(CONFIG_MPC8360)
-	ddr_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
+	ddr_clk = csb_clk *
+		  (1 + ((im->reset.rcwl & RCWL_DDRCM) >> RCWL_DDRCM_SHIFT));
 	corepll = (im->reset.rcwl & RCWL_COREPLL) >> RCWL_COREPLL_SHIFT;
 #if defined (CONFIG_MPC8360)
-	ddr_sec_clk = csb_clk * (1 + ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
+	ddr_sec_clk = csb_clk * (1 +
+		       ((im->reset.rcwl & RCWL_LBIUCM) >> RCWL_LBIUCM_SHIFT));
 #endif
 #else
 #error Unknown MPC83xx chip
 #endif
 
 	corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
-	if (corecnf_tab_index > (sizeof(corecnf_tab)/sizeof(corecnf_t)) ) {
+	if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
 		/* corecnf_tab_index is too high, possibly worng value */
 		return -11;
 	}
@@ -297,7 +301,7 @@ int get_clocks (void)
 		core_clk = 2 * csb_clk;
 		break;
 	case _2_5x:
-		core_clk = ( 5 * csb_clk) / 2;
+		core_clk = (5 * csb_clk) / 2;
 		break;
 	case _3x:
 		core_clk = 3 * csb_clk;
@@ -310,31 +314,31 @@ int get_clocks (void)
 #if defined (CONFIG_MPC8360)
 	qepmf = (im->reset.rcwl & RCWL_CEPMF) >> RCWL_CEPMF_SHIFT;
 	qepdf = (im->reset.rcwl & RCWL_CEPDF) >> RCWL_CEPDF_SHIFT;
-	qe_clk = (pci_sync_in * qepmf)/(1+qepdf);
+	qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
 	brg_clk = qe_clk / 2;
 #endif
 
-	gd->csb_clk     = csb_clk;
+	gd->csb_clk = csb_clk;
 #if defined(CONFIG_MPC8349)
-	gd->tsec1_clk   = tsec1_clk;
-	gd->tsec2_clk   = tsec2_clk;
-	gd->usbmph_clk  = usbmph_clk;
-	gd->usbdr_clk   = usbdr_clk;
+	gd->tsec1_clk = tsec1_clk;
+	gd->tsec2_clk = tsec2_clk;
+	gd->usbmph_clk = usbmph_clk;
+	gd->usbdr_clk = usbdr_clk;
 #endif
-	gd->core_clk    = core_clk;
-	gd->i2c1_clk    = i2c1_clk;
-	gd->i2c2_clk    = i2c2_clk;
-	gd->enc_clk     = enc_clk;
-	gd->lbiu_clk    = lbiu_clk;
-	gd->lclk_clk    = lclk_clk;
-	gd->ddr_clk     = ddr_clk;
+	gd->core_clk = core_clk;
+	gd->i2c1_clk = i2c1_clk;
+	gd->i2c2_clk = i2c2_clk;
+	gd->enc_clk = enc_clk;
+	gd->lbiu_clk = lbiu_clk;
+	gd->lclk_clk = lclk_clk;
+	gd->ddr_clk = ddr_clk;
 #if defined (CONFIG_MPC8360)
 	gd->ddr_sec_clk = ddr_sec_clk;
-	gd->qe_clk      = qe_clk;
-	gd->brg_clk     = brg_clk;
+	gd->qe_clk = qe_clk;
+	gd->brg_clk = brg_clk;
 #endif
-	gd->cpu_clk     = gd->core_clk;
-	gd->bus_clk     = gd->csb_clk;
+	gd->cpu_clk = gd->core_clk;
+	gd->bus_clk = gd->csb_clk;
 	return 0;
 
 }
@@ -344,38 +348,37 @@ ulong get_ddr_clk(ulong dummy)
 	return gd->ddr_clk;
 }
 
-
 /********************************************
  * get_bus_freq
  * return system bus freq in Hz
  *********************************************/
-ulong get_bus_freq (ulong dummy)
+ulong get_bus_freq(ulong dummy)
 {
 	return gd->csb_clk;
 }
 
-int print_clock_conf (void)
+int print_clock_conf(void)
 {
 	printf("Clock configuration:\n");
-	printf("  Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
-	printf("  Core:                %4d MHz\n",gd->core_clk/1000000);
+	printf("  Coherent System Bus: %4d MHz\n", gd->csb_clk / 1000000);
+	printf("  Core:                %4d MHz\n", gd->core_clk / 1000000);
 #if defined (CONFIG_MPC8360)
-	printf("  QE:                  %4d MHz\n",gd->qe_clk/1000000);
+	printf("  QE:                  %4d MHz\n", gd->qe_clk / 1000000);
 #endif
-	printf("  Local Bus Controller:%4d MHz\n",gd->lbiu_clk/1000000);
-	printf("  Local Bus:           %4d MHz\n",gd->lclk_clk/1000000);
-	printf("  DDR:                 %4d MHz\n",gd->ddr_clk/1000000);
+	printf("  Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000);
+	printf("  Local Bus:           %4d MHz\n", gd->lclk_clk / 1000000);
+	printf("  DDR:                 %4d MHz\n", gd->ddr_clk / 1000000);
 #if defined (CONFIG_MPC8360)
-	printf("  DDR Secondary:       %4d MHz\n",gd->ddr_sec_clk/1000000);
+	printf("  DDR Secondary:       %4d MHz\n", gd->ddr_sec_clk / 1000000);
 #endif
-	printf("  SEC:                 %4d MHz\n",gd->enc_clk/1000000);
-	printf("  I2C1:                %4d MHz\n",gd->i2c1_clk/1000000);
-	printf("  I2C2:                %4d MHz\n",gd->i2c2_clk/1000000);
+	printf("  SEC:                 %4d MHz\n", gd->enc_clk / 1000000);
+	printf("  I2C1:                %4d MHz\n", gd->i2c1_clk / 1000000);
+	printf("  I2C2:                %4d MHz\n", gd->i2c2_clk / 1000000);
 #if defined(CONFIG_MPC8349)
-	printf("  TSEC1:               %4d MHz\n",gd->tsec1_clk/1000000);
-	printf("  TSEC2:               %4d MHz\n",gd->tsec2_clk/1000000);
-	printf("  USB MPH:             %4d MHz\n",gd->usbmph_clk/1000000);
-	printf("  USB DR:              %4d MHz\n",gd->usbdr_clk/1000000);
+	printf("  TSEC1:               %4d MHz\n", gd->tsec1_clk / 1000000);
+	printf("  TSEC2:               %4d MHz\n", gd->tsec2_clk / 1000000);
+	printf("  USB MPH:             %4d MHz\n", gd->usbmph_clk / 1000000);
+	printf("  USB DR:              %4d MHz\n", gd->usbdr_clk / 1000000);
 #endif
 	return 0;
 }
-- 
cgit v1.2.1


From d239d74b1c937984bc519083a8e7de373a390f06 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Fri, 3 Nov 2006 12:00:28 -0600
Subject: mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR

Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
tree matches the other 8xxx trees.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 cpu/mpc83xx/cpu.c        | 14 +++++++-------
 cpu/mpc83xx/cpu_init.c   |  2 +-
 cpu/mpc83xx/interrupts.c |  2 +-
 cpu/mpc83xx/qe_io.c      |  2 +-
 cpu/mpc83xx/spd_sdram.c  |  4 ++--
 cpu/mpc83xx/speed.c      |  2 +-
 cpu/mpc83xx/start.S      | 16 ++++++++--------
 7 files changed, 21 insertions(+), 21 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 3d8ca772c6..0bd05330de 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -49,7 +49,7 @@ int checkcpu(void)
 	u32 spridr;
 	char buf[32];
 
-	immr = (immap_t *)CFG_IMMRBAR;
+	immr = (immap_t *)CFG_IMMR;
 
 	if ((pvr & 0xFFFF0000) != PVR_83xx) {
 		puts("Not MPC83xx Family!!!\n");
@@ -141,7 +141,7 @@ int checkcpu(void)
 void upmconfig (uint upm, uint *table, uint size)
 {
 #if defined(CONFIG_MPC834X)
-	volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 	volatile lbus83xx_t *lbus = &immap->lbus;
 	volatile uchar *dummy = NULL;
 	const u32 msel = (upm + 4) << BR_MSEL_SHIFT;	/* What the MSEL field in BRn should be */
@@ -188,7 +188,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	ulong addr;
 #endif
 
-	volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 
 #ifdef MPC83xx_RESET
 	/* Interrupts and MMU off */
@@ -259,7 +259,7 @@ void watchdog_reset (void)
 	int re_enable = disable_interrupts();
 
 	/* Reset the 83xx watchdog */
-	volatile immap_t *immr = (immap_t *) CFG_IMMRBAR;
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 	immr->wdt.swsrr = 0x556c;
 	immr->wdt.swsrr = 0xaa39;
 
@@ -311,7 +311,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
 #if defined(CONFIG_DDR_ECC)
 void dma_init(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 status = swab32(dma->dmasr0);
 	volatile u32 dmamr0 = swab32(dma->dmamr0);
@@ -342,7 +342,7 @@ void dma_init(void)
 
 uint dma_check(void)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 status = swab32(dma->dmasr0);
 	volatile u32 byte_count = swab32(dma->dmabcr0);
@@ -361,7 +361,7 @@ uint dma_check(void)
 
 int dma_xfer(void *dest, u32 count, void *src)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile dma83xx_t *dma = &immap->dma;
 	volatile u32 dmamr0;
 
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index eb8f8c042f..4f80f4a094 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -219,7 +219,7 @@ void cpu_init_f (volatile immap_t * im)
 int cpu_init_r (void)
 {
 #ifdef CONFIG_QE
-	uint qe_base = CFG_IMMRBAR + 0x00100000; /* QE immr base */
+	uint qe_base = CFG_IMMR + 0x00100000; /* QE immr base */
 	qe_init(qe_base);
 	qe_reset();
 #endif
diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c
index 5a0babfcbb..98fccff227 100644
--- a/cpu/mpc83xx/interrupts.c
+++ b/cpu/mpc83xx/interrupts.c
@@ -45,7 +45,7 @@ struct irq_action {
 
 int interrupt_init_cpu (unsigned *decrementer_count)
 {
-	volatile immap_t *immr = (immap_t *) CFG_IMMRBAR;
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 
 	*decrementer_count = (gd->bus_clk / 4) / CFG_HZ;
 
diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c
index 11cf3722bd..ebe3487112 100644
--- a/cpu/mpc83xx/qe_io.c
+++ b/cpu/mpc83xx/qe_io.c
@@ -34,7 +34,7 @@ void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
 	u32			pin_2bit_assign;
 	u32			pin_1bit_mask;
 	u32			tmp_val;
-	volatile immap_t	*im = (volatile immap_t *)CFG_IMMRBAR;
+	volatile immap_t	*im = (volatile immap_t *)CFG_IMMR;
 	volatile gpio83xx_t	*par_io =(volatile gpio83xx_t *)&im->gpio;
 
 	/* Caculate pin location and 2bit mask and dir */
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index b91c6130e7..dc8f6790a6 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -112,7 +112,7 @@ static void spd_debug(spd_eeprom_t *spd)
 
 long int spd_sdram()
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ddr83xx_t *ddr = &immap->ddr;
 	volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
 	spd_eeprom_t spd;
@@ -562,7 +562,7 @@ static __inline__ unsigned long get_tbms (void)
 /* #define CONFIG_DDR_ECC_INIT_VIA_DMA */
 void ddr_enable_ecc(unsigned int dram_size)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ddr83xx_t *ddr= &immap->ddr;
 	unsigned long t_start, t_end;
 	register u64 *p;
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 1e082a7868..213e7180a7 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -94,7 +94,7 @@ corecnf_t corecnf_tab[] = {
  */
 int get_clocks(void)
 {
-	volatile immap_t *im = (immap_t *) CFG_IMMRBAR;
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
 	u32 pci_sync_in;
 	u8 spmf;
 	u8 clkin_div;
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
index c43835c8dc..0f27bb61f8 100644
--- a/cpu/mpc83xx/start.S
+++ b/cpu/mpc83xx/start.S
@@ -104,9 +104,9 @@ version_string:
 #ifndef CONFIG_DEFAULT_IMMR
 #error CONFIG_DEFAULT_IMMR must be defined
 #endif /* CFG_DEFAULT_IMMR */
-#ifndef CFG_IMMRBAR
-#define CFG_IMMRBAR CONFIG_DEFAULT_IMMR
-#endif /* CFG_IMMRBAR */
+#ifndef CFG_IMMR
+#define CFG_IMMR CONFIG_DEFAULT_IMMR
+#endif /* CFG_IMMR */
 
 /*
  * After configuration, a system reset exception is executed using the
@@ -152,8 +152,8 @@ boot_cold: /* time t 3 */
 	nop
 boot_warm: /* time t 5 */
 	mfmsr	r5			/* save msr contents	*/
-	lis	r3, CFG_IMMRBAR@h
-	ori	r3, r3, CFG_IMMRBAR@l
+	lis	r3, CFG_IMMR@h
+	ori	r3, r3, CFG_IMMR@l
 	stw	r3, IMMRBAR(r4)
 
 	/* Initialise the E300 processor core		*/
@@ -226,7 +226,7 @@ in_flash:
 	GET_GOT			/* initialize GOT access	*/
 
 	/* r3: IMMR */
-	lis	r3, CFG_IMMRBAR@h
+	lis	r3, CFG_IMMR@h
 	/* run low-level CPU init code (in Flash)*/
 	bl	cpu_init_f
 
@@ -446,7 +446,7 @@ init_e300_core: /* time t 10 */
 	mtspr	SRR1, r3			/* Make SRR1 match MSR */
 
 
-	lis	r3, CFG_IMMRBAR@h
+	lis	r3, CFG_IMMR@h
 #if defined(CONFIG_WATCHDOG)
 	/* Initialise the Wathcdog values and reset it (if req) */
 	/*------------------------------------------------------*/
@@ -1201,7 +1201,7 @@ map_flash_by_law1:
 	/* When booting from ROM (Flash or EPROM), clear the  */
 	/* Address Mask in OR0 so ROM appears everywhere      */
 	/*----------------------------------------------------*/
-	lis	r3, (CFG_IMMRBAR)@h  /* r3 <= CFG_IMMRBAR    */
+	lis	r3, (CFG_IMMR)@h  /* r3 <= CFG_IMMR    */
 	lwz	r4, OR0@l(r3)
 	li	r5, 0x7fff        /* r5 <= 0x00007FFFF */
 	and	r4, r4, r5
-- 
cgit v1.2.1


From be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Fri, 3 Nov 2006 19:15:00 -0600
Subject: mpc83xx: Update 83xx to use fsl_i2c.c

Update the 83xx tree to use I2C support in drivers/fsl_i2c.c.  Delete
cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
Added multiple I2C bus support to fsl_i2c.c.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 cpu/mpc83xx/Makefile |   2 +-
 cpu/mpc83xx/cpu.c    |   4 +-
 cpu/mpc83xx/i2c.c    | 423 ---------------------------------------------------
 3 files changed, 3 insertions(+), 426 deletions(-)
 delete mode 100644 cpu/mpc83xx/i2c.c

(limited to 'cpu')

diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index e254ef98f6..4b9dcc8180 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -29,7 +29,7 @@ LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
 COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
-	  i2c.o spd_sdram.o qe_io.o
+	  spd_sdram.o qe_io.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 0bd05330de..1d169bab22 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -111,7 +111,7 @@ int checkcpu(void)
 }
 
 
-/**
+/*
  * Program a UPM with the code supplied in the table.
  *
  * The 'dummy' variable is used to increment the MAD. 'dummy' is
@@ -137,7 +137,7 @@ int checkcpu(void)
  * upm: 0=UPMA, 1=UPMB, 2=UPMC
  * table: Pointer to an array of values to program
  * size: Number of elements in the array.  Must be 64 or less.
-*/
+ */
 void upmconfig (uint upm, uint *table, uint size)
 {
 #if defined(CONFIG_MPC834X)
diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c
deleted file mode 100644
index ce78491616..0000000000
--- a/cpu/mpc83xx/i2c.c
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * (C) Copyright 2006 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2003,Motorola Inc.
- * Xianghua Xiao <x.xiao@motorola.com>
- * Adapted for Motorola 85xx chip.
- *
- * (C) Copyright 2003
- * Gleb Natapov <gnatapov@mrv.com>
- * Some bits are taken from linux driver writen by adrian@humboldt.co.uk
- *
- * Hardware I2C driver for MPC107 PCI bridge.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Change log:
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- *           Initial file creating (porting from 85XX & 8260)
- * 20060601: Dave Liu (daveliu@freescale.com)
- *           Unified variable names for mpc83xx
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_HARD_I2C
-#include <i2c.h>
-#include <asm/i2c.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
- * Default is bus 1.  This is necessary because the DDR initialization
- * runs from ROM, and we can't switch buses because we can't modify
- * the i2c_dev variable.  Everything gets straightened out once i2c_init
- * is called from RAM.  */
-
-#ifndef CFG_SPD_BUS_NUM
-#define CFG_SPD_BUS_NUM 1
-#endif
-
-static unsigned int i2c_bus_num = CFG_SPD_BUS_NUM;
-
-#if CFG_SPD_BUS_NUM == 1
-static volatile i2c_t *i2c_dev = I2C_1;
-#else
-static volatile i2c_t *i2c_dev = I2C_2;
-#endif
-
-static int i2c_bus_speed[2] = {0, 0};
-
-/*
- * Map the frequency divider to the FDR.  This data is taken from table 17-5
- * of the MPC8349EA reference manual, with duplicates removed.
- */
-static struct {
-    unsigned int divider;
-    u8 fdr;
-} i2c_speed_map[] =
-{
-	{0, 0x20},
-	{256, 0x20},
-	{288, 0x21},
-	{320, 0x22},
-	{352, 0x23},
-	{384, 0x24},
-	{416, 0x01},
-	{448, 0x25},
-	{480, 0x02},
-	{512, 0x26},
-	{576, 0x27},
-	{640, 0x28},
-	{704, 0x05},
-	{768, 0x29},
-	{832, 0x06},
-	{896, 0x2A},
-	{1024, 0x2B},
-	{1152, 0x08},
-	{1280, 0x2C},
-	{1536, 0x2D},
-	{1792, 0x2E},
-	{1920, 0x0B},
-	{2048, 0x2F},
-	{2304, 0x0C},
-	{2560, 0x30},
-	{3072, 0x31},
-	{3584, 0x32},
-	{3840, 0x0F},
-	{4096, 0x33},
-	{4608, 0x10},
-	{5120, 0x34},
-	{6144, 0x35},
-	{7168, 0x36},
-	{7680, 0x13},
-	{8192, 0x37},
-	{9216, 0x14},
-	{10240, 0x38},
-	{12288, 0x39},
-	{14336, 0x3A},
-	{15360, 0x17},
-	{16384, 0x3B},
-	{18432, 0x18},
-	{20480, 0x3C},
-	{24576, 0x3D},
-	{28672, 0x3E},
-	{30720, 0x1B},
-	{32768, 0x3F},
-	{36864, 0x1C},
-	{40960, 0x1D},
-	{49152, 0x1E},
-	{61440, 0x1F},
-	{-1, 0x1F}
-};
-
-#define NUM_I2C_SPEEDS (sizeof(i2c_speed_map) / sizeof(i2c_speed_map[0]))
-
-static int set_speed(unsigned int speed)
-{
-	unsigned long i2c_clk;
-	unsigned int divider, i;
-	u8 fdr = 0x3F;
-
-	i2c_clk = (i2c_bus_num == 2) ? gd->i2c2_clk : gd->i2c1_clk;
-
-	divider = i2c_clk / speed;
-
-	/* Scan i2c_speed_map[] for the closest matching divider.*/
-
-	for (i = 0; i < NUM_I2C_SPEEDS-1; i++) {
-		/* Locate our divider in between two entries in i2c_speed_map[] */
-		if ((divider >= i2c_speed_map[i].divider) &&
-		    (divider <= i2c_speed_map[i+1].divider)) {
-			/* Which one is closer? */
-			if ((divider - i2c_speed_map[i].divider) < (i2c_speed_map[i+1].divider - divider)) {
-				fdr = i2c_speed_map[i].fdr;
-			} else {
-				fdr = i2c_speed_map[i+1].fdr;
-			}
-			break;
-		}
-	}
-
-	writeb(fdr, &i2c_dev->fdr);
-	i2c_bus_speed[i2c_bus_num - 1] = speed;
-
-	return 0;
-}
-
-
-static void _i2c_init(int speed, int slaveadd)
-{
-	/* stop I2C controller */
-	writeb(0x00 , &i2c_dev->cr);
-
-	/* set clock */
-	set_speed(speed);
-
-	/* set default filter */
-	writeb(IC2_FDR,&i2c_dev->dfsrr);
-
-	/* write slave address */
-	writeb(slaveadd, &i2c_dev->adr);
-
-	/* clear status register */
-	writeb(I2C_CR_MTX, &i2c_dev->sr);
-
-	/* start I2C controller */
-	writeb(I2C_CR_MEN, &i2c_dev->cr);
-}
-
-void i2c_init(int speed, int slaveadd)
-{
-	/* Set both interfaces to the same speed and slave address */
-	/* Note: This function gets called twice - before and after
-	 * relocation to RAM.  The first time it's called, we are unable
-	 * to change buses, so whichever one 'i2c_dev' was initialized to
-	 * gets set twice.  When run from RAM both buses get set properly */
-
-	i2c_set_bus_num(1);
-	_i2c_init(speed, slaveadd);
-#ifdef	CFG_I2C2_OFFSET
-	i2c_set_bus_num(2);
-	_i2c_init(speed, slaveadd);
-	i2c_set_bus_num(1);
-#endif	/* CFG_I2C2_OFFSET */
-}
-
-static __inline__ int
-i2c_wait4bus (void)
-{
-	ulong timeval = get_timer (0);
-	while (readb(&i2c_dev->sr) & I2C_SR_MBB) {
-		if (get_timer (timeval) > I2C_TIMEOUT) {
-			return -1;
-		}
-	}
-	return 0;
-}
-
-static __inline__ int
-i2c_wait (int write)
-{
-	u32 csr;
-	ulong timeval = get_timer(0);
-	do {
-		csr = readb(&i2c_dev->sr);
-
-		if (!(csr & I2C_SR_MIF))
-			continue;
-
-		writeb(0x0, &i2c_dev->sr);
-
-		if (csr & I2C_SR_MAL) {
-			debug("i2c_wait: MAL\n");
-			return -1;
-		}
-
-		if (!(csr & I2C_SR_MCF))	{
-			debug("i2c_wait: unfinished\n");
-			return -1;
-		}
-
-		if (write == I2C_WRITE && (csr & I2C_SR_RXAK)) {
-			debug("i2c_wait: No RXACK\n");
-			return -1;
-		}
-
-		return 0;
-	} while (get_timer (timeval) < I2C_TIMEOUT);
-
-	debug("i2c_wait: timed out\n");
-	return -1;
-}
-
-static __inline__ int
-i2c_write_addr (u8 dev, u8 dir, int rsta)
-{
-	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX |
-	       (rsta?I2C_CR_RSTA:0),
-	       &i2c_dev->cr);
-
-	writeb((dev << 1) | dir, &i2c_dev->dr);
-
-	if (i2c_wait (I2C_WRITE) < 0)
-		return 0;
-	return 1;
-}
-
-static __inline__ int
-__i2c_write (u8 *data, int length)
-{
-	int i;
-
-	writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX,
-	       &i2c_dev->cr);
-
-	for (i=0; i < length; i++) {
-		writeb(data[i], &i2c_dev->dr);
-
-		if (i2c_wait (I2C_WRITE) < 0)
-			break;
-	}
-	return i;
-}
-
-static __inline__ int
-__i2c_read (u8 *data, int length)
-{
-	int i;
-
-	writeb(I2C_CR_MEN | I2C_CR_MSTA |
-	       ((length == 1) ? I2C_CR_TXAK : 0),
-	       &i2c_dev->cr);
-
-	/* dummy read */
-	readb(&i2c_dev->dr);
-
-	for (i=0; i < length; i++) {
-		if (i2c_wait (I2C_READ) < 0)
-			break;
-
-		/* Generate ack on last next to last byte */
-		if (i == length - 2)
-			writeb(I2C_CR_MEN | I2C_CR_MSTA |
-			       I2C_CR_TXAK,
-			       &i2c_dev->cr);
-
-		/* Generate stop on last byte */
-		if (i == length - 1)
-			writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev->cr);
-
-		data[i] = readb(&i2c_dev->dr);
-	}
-	return i;
-}
-
-int
-i2c_read (u8 dev, uint addr, int alen, u8 *data, int length)
-{
-	int i = 0;
-	u8 *a = (u8*)&addr;
-
-	if (i2c_wait4bus () < 0)
-		goto exit;
-
-	if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
-		goto exit;
-
-	if (__i2c_write (&a[4 - alen], alen) != alen)
-		goto exit;
-
-	if (i2c_write_addr (dev, I2C_READ, 1) == 0)
-		goto exit;
-
-	i = __i2c_read (data, length);
-
- exit:
-	writeb(I2C_CR_MEN, &i2c_dev->cr);
-	return !(i == length);
-}
-
-int
-i2c_write (u8 dev, uint addr, int alen, u8 *data, int length)
-{
-	int i = 0;
-	u8 *a = (u8*)&addr;
-
-	if (i2c_wait4bus () < 0)
-		goto exit;
-
-	if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
-		goto exit;
-
-	if (__i2c_write (&a[4 - alen], alen) != alen)
-		goto exit;
-
-	i = __i2c_write (data, length);
-
- exit:
-	writeb(I2C_CR_MEN, &i2c_dev->cr);
-	return !(i == length);
-}
-
-int i2c_probe (uchar chip)
-{
-	int tmp;
-
-	/*
-	 * Try to read the first location of the chip.  The underlying
-	 * driver doesn't appear to support sending just the chip address
-	 * and looking for an <ACK> back.
-	 */
-	udelay(10000);
-	return i2c_read (chip, 0, 1, (uchar *)&tmp, 1);
-}
-
-uchar i2c_reg_read (uchar i2c_addr, uchar reg)
-{
-	uchar buf[1];
-
-	i2c_read (i2c_addr, reg, 1, buf, 1);
-
-	return (buf[0]);
-}
-
-void i2c_reg_write (uchar i2c_addr, uchar reg, uchar val)
-{
-	i2c_write (i2c_addr, reg, 1, &val, 1);
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-	if(bus == 1)
-	{
-		i2c_dev = I2C_1;
-	}
-#ifdef	CFG_I2C2_OFFSET
-	else if(bus == 2)
-	{
-		i2c_dev = I2C_2;
-	}
-#endif
-	else
-	{
-		return -1;
-	}
-	i2c_bus_num = bus;
-	return 0;
-}
-
-int i2c_set_bus_speed(unsigned int speed)
-{
-	return set_speed(speed);
-}
-
-unsigned int i2c_get_bus_num(void)
-{
-	return i2c_bus_num;
-}
-
-unsigned int i2c_get_bus_speed(void)
-{
-	return i2c_bus_speed[i2c_bus_num - 1];
-}
-#endif /* CONFIG_HARD_I2C */
-- 
cgit v1.2.1


From e732faec95a83cb468b4850ae807c8301dde8f6a Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Tue, 28 Nov 2006 16:09:24 +0100
Subject: [PATCH] PPC4xx: 440SP Rev. C detection added

Signed-off-by: Stefan Roese <sr@denx.de>
---
 cpu/ppc4xx/cpu.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'cpu')

diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 447383f8d3..9c5c9109b1 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -340,6 +340,10 @@ int checkcpu (void)
 		puts("SP Rev. B");
 		break;
 
+	case PVR_440SP_RC:
+		puts("SP Rev. C");
+		break;
+
 	case PVR_440SPe_RA:
 		puts("SPe Rev. A");
 		break;
-- 
cgit v1.2.1


From e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Tue, 28 Nov 2006 17:55:49 +0100
Subject: [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to
 Linux.

This patch adds the code and configuration necessary to boot with an
arch/powerpc Linux kernel.

Signed-off-by: Grant Likely <grant.likely@gmail.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
---
 cpu/mpc5xxx/cpu.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

(limited to 'cpu')

diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index 6b6f8282cf..20e6735de4 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -31,6 +31,10 @@
 #include <mpc5xxx.h>
 #include <asm/processor.h>
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 int checkcpu (void)
@@ -102,3 +106,27 @@ unsigned long get_tbclk (void)
 }
 
 /* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_cpu_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	ulong clock;
+	int len;
+
+	clock = bd->bi_busfreq;
+	p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32(clock);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32(clock);
+
+	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len);
+	if (p != NULL)
+		memcpy(p, bd->bi_enetaddr, 6);
+
+}
+#endif
-- 
cgit v1.2.1


From e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 28 Nov 2006 12:09:35 -0600
Subject: mpc83xx: Miscellaneous code style fixes

Implement various code style fixes and similar changes.

Signed-off-by: Timur Tabi <timur@freescale.com>
---
 cpu/mpc83xx/cpu.c        |  5 ----
 cpu/mpc83xx/cpu_init.c   |  5 ----
 cpu/mpc83xx/interrupts.c |  7 -----
 cpu/mpc83xx/spd_sdram.c  | 74 ++++++++++++++++++------------------------------
 cpu/mpc83xx/speed.c      | 10 -------
 cpu/mpc83xx/traps.c      | 18 +++---------
 6 files changed, 32 insertions(+), 87 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 1d169bab22..1b5107881e 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -18,11 +18,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
- * Change log:
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- *	     Initial file creating (porting from 85XX & 8260)
  */
 
 /*
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 4f80f4a094..e5725fb91d 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -18,11 +18,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
- * Change log:
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- *           Initial file creating (porting from 85XX & 8260)
  */
 
 #include <common.h>
diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c
index 98fccff227..bb1fe1af3f 100644
--- a/cpu/mpc83xx/interrupts.c
+++ b/cpu/mpc83xx/interrupts.c
@@ -21,13 +21,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
- * Change log:
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 22-Oct-00
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- *           Initial file creating (porting from 85XX & 8260)
  */
 
 #include <common.h>
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index dc8f6790a6..cfc42c4a83 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -25,15 +25,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
- * Change log:
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- *           Initial file creating (porting from 85XX & 8260)
- * 20060601: Dave Liu (daveliu@freescale.com)
- *           DDR ECC support
- *           unify variable names for 83xx
- *           code cleanup
  */
 
 #include <common.h>
@@ -45,6 +36,8 @@
 
 #ifdef CONFIG_SPD_EEPROM
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
 extern void dma_init(void);
 extern uint dma_check(void);
@@ -58,19 +51,16 @@ extern int dma_xfer(void *dest, uint count, void *src);
 /*
  * Convert picoseconds into clock cycles (rounding up if needed).
  */
-extern ulong get_ddr_clk(ulong dummy);
-
 int
 picos_to_clk(int picos)
 {
 	unsigned int ddr_bus_clk;
 	int clks;
 
-	ddr_bus_clk = get_ddr_clk(0) >> 1;
+	ddr_bus_clk = gd->ddr_clk >> 1;
 	clks = picos / ((1000000000 / ddr_bus_clk) * 1000);
-	if (picos % ((1000000000 / ddr_bus_clk) * 1000) !=0) {
+	if (picos % ((1000000000 / ddr_bus_clk) * 1000) != 0)
 		clks++;
-	}
 
 	return clks;
 }
@@ -249,7 +239,7 @@ long int spd_sdram()
 
 	debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate);
 
-	ddrc_clk = get_ddr_clk(0) / 1000000;
+	ddrc_clk = gd->ddr_clk / 1000000;
 
 	if (max_data_rate >= 390) { /* it is DDR 400 */
 		if (ddrc_clk <= 410 && ddrc_clk > 350) {
@@ -259,31 +249,28 @@ long int spd_sdram()
 		} else if (ddrc_clk <= 350 && ddrc_clk > 280) {
 			/* DDR controller clk at 280~350 */
 			effective_data_rate = 333; /* 6ns */
-			if (spd.clk_cycle2 == 0x60) {
+			if (spd.clk_cycle2 == 0x60)
 				caslat = caslat - 1;
-			} else {
+			else
 				caslat = caslat;
-			}
 		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
 			/* DDR controller clk at 230~280 */
 			effective_data_rate = 266; /* 7.5ns */
-			if (spd.clk_cycle3 == 0x75) {
+			if (spd.clk_cycle3 == 0x75)
 				caslat = caslat - 2;
-			} else if (spd.clk_cycle2 == 0x60) {
+			else if (spd.clk_cycle2 == 0x60)
 				caslat = caslat - 1;
-			} else {
+			else
 				caslat = caslat;
-			}
 		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
 			/* DDR controller clk at 90~230 */
 			effective_data_rate = 200; /* 10ns */
-			if (spd.clk_cycle3 == 0x75) {
+			if (spd.clk_cycle3 == 0x75)
 				caslat = caslat - 2;
-			} else if (spd.clk_cycle2 == 0x60) {
+			else if (spd.clk_cycle2 == 0x60)
 				caslat = caslat - 1;
-			} else {
+			else
 				caslat = caslat;
-			}
 		}
 	} else if (max_data_rate >= 323) { /* it is DDR 333 */
 		if (ddrc_clk <= 350 && ddrc_clk > 280) {
@@ -293,21 +280,19 @@ long int spd_sdram()
 		} else if (ddrc_clk <= 280 && ddrc_clk > 230) {
 			/* DDR controller clk at 230~280 */
 			effective_data_rate = 266; /* 7.5ns */
-			if (spd.clk_cycle2 == 0x75) {
+			if (spd.clk_cycle2 == 0x75)
 				caslat = caslat - 1;
-			} else {
+			else
 				caslat = caslat;
-			}
 		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
 			/* DDR controller clk at 90~230 */
 			effective_data_rate = 200; /* 10ns */
-			if (spd.clk_cycle3 == 0xa0) {
+			if (spd.clk_cycle3 == 0xa0)
 				caslat = caslat - 2;
-			} else if (spd.clk_cycle2 == 0x75) {
+			else if (spd.clk_cycle2 == 0x75)
 				caslat = caslat - 1;
-			} else {
+			else
 				caslat = caslat;
-			}
 		}
 	} else if (max_data_rate >= 256) { /* it is DDR 266 */
 		if (ddrc_clk <= 350 && ddrc_clk > 280) {
@@ -322,9 +307,8 @@ long int spd_sdram()
 		} else if (ddrc_clk <= 230 && ddrc_clk > 90) {
 			/* DDR controller clk at 90~230 */
 			effective_data_rate = 200; /* 10ns */
-			if (spd.clk_cycle2 == 0xa0) {
+			if (spd.clk_cycle2 == 0xa0)
 				caslat = caslat - 1;
-			}
 		}
 	} else if (max_data_rate >= 190) { /* it is DDR 200 */
 		if (ddrc_clk <= 350 && ddrc_clk > 230) {
@@ -346,13 +330,13 @@ long int spd_sdram()
 	 * Errata DDR6 work around: input enable 2 cycles earlier.
 	 * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
 	 */
-	if (caslat == 2) {
+	if (caslat == 2)
 		ddr->debug_reg = 0x201c0000; /* CL=2 */
-	} else if (caslat == 3) {
+	else if (caslat == 3)
 		ddr->debug_reg = 0x202c0000; /* CL=2.5 */
-	} else if (caslat == 4) {
+	else if (caslat == 4)
 		ddr->debug_reg = 0x202c0000; /* CL=3.0 */
-	}
+
 	__asm__ __volatile__ ("sync");
 
 	debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
@@ -392,11 +376,10 @@ long int spd_sdram()
 	}
 
 	/* Is this an ECC DDR chip? */
-	if (spd.config == 0x02) {
+	if (spd.config == 0x02)
 		printf(" with ECC\n");
-	} else {
+	else
 		printf(" without ECC\n");
-	}
 
 	/* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
 	   Burst type is sequential
@@ -482,14 +465,13 @@ long int spd_sdram()
 	sdram_cfg = 0xC2000000;
 
 	/* sdram_cfg[3] = RD_EN - registered DIMM enable */
-	if (spd.mod_attr & 0x02) {
+	if (spd.mod_attr & 0x02)
 		sdram_cfg |= 0x10000000;
-	}
 
 	/* The DIMM is 32bit width */
-	if (spd.dataw_lsb == 0x20) {
+	if (spd.dataw_lsb == 0x20)
 		sdram_cfg |= 0x000C0000;
-	}
+
 	ddrc_ecc_enable = 0;
 
 #if defined(CONFIG_DDR_ECC)
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 213e7180a7..7e53b1e606 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -21,11 +21,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
- * Change log:
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- *           Initial file creating (porting from 85XX & 8260)
  */
 
 #include <common.h>
@@ -343,11 +338,6 @@ int get_clocks(void)
 
 }
 
-ulong get_ddr_clk(ulong dummy)
-{
-	return gd->ddr_clk;
-}
-
 /********************************************
  * get_bus_freq
  * return system bus freq in Hz
diff --git a/cpu/mpc83xx/traps.c b/cpu/mpc83xx/traps.c
index 44345afbfa..152fa73561 100644
--- a/cpu/mpc83xx/traps.c
+++ b/cpu/mpc83xx/traps.c
@@ -1,5 +1,8 @@
 /*
- * linux/arch/ppc/kernel/traps.c
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -15,19 +18,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
- * Change log:
- *
- * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * 20050101: Eran Liberty (liberty@freescale.com)
- *           Initial file creating (porting from 85XX & 8260)
  */
 
 /*
-- 
cgit v1.2.1


From 1eac2a71417b6675b11aace72102a2e7fde8f5c6 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Nov 2006 15:42:37 +0100
Subject: [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards

This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
quite similar and share the same board directory "prodrive/p3mx"
and the same config file "p3mx.h".

Signed-off-by: Stefan Roese <sr@denx.de>
---
 cpu/74xx_7xx/cpu.c      | 8 ++++++++
 cpu/74xx_7xx/cpu_init.c | 1 +
 cpu/74xx_7xx/speed.c    | 1 +
 cpu/74xx_7xx/start.S    | 8 +++++---
 4 files changed, 15 insertions(+), 3 deletions(-)

(limited to 'cpu')

diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c
index ca45e17edb..d98831cb48 100644
--- a/cpu/74xx_7xx/cpu.c
+++ b/cpu/74xx_7xx/cpu.c
@@ -101,6 +101,10 @@ get_cpu_type(void)
 		type = CPU_7457;
 		break;
 
+	case 0x8004:
+		type = CPU_7448;
+		break;
+
 	default:
 		break;
 	}
@@ -152,6 +156,10 @@ int checkcpu (void)
 		str = "MPC7410";
 		break;
 
+	case CPU_7448:
+		str = "MPC7448";
+		break;
+
 	case CPU_7450:
 		str = "MPC7450";
 		break;
diff --git a/cpu/74xx_7xx/cpu_init.c b/cpu/74xx_7xx/cpu_init.c
index 93f180f267..e02a4cc21c 100644
--- a/cpu/74xx_7xx/cpu_init.c
+++ b/cpu/74xx_7xx/cpu_init.c
@@ -43,6 +43,7 @@ cpu_init_f (void)
 	case CPU_7450:
 	case CPU_7455:
 	case CPU_7457:
+	case CPU_7448:
 		/* enable the timebase bit in HID0 */
 		set_hid0(get_hid0() | 0x4000000);
 		break;
diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c
index 2dc510746d..d1800ede05 100644
--- a/cpu/74xx_7xx/speed.c
+++ b/cpu/74xx_7xx/speed.c
@@ -91,6 +91,7 @@ int get_clocks (void)
 
 	/* calculate the clock frequency based upon the CPU type */
 	switch (get_cpu_type()) {
+	case CPU_7448:
 	case CPU_7455:
 	case CPU_7457:
 		/*
diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S
index 1fc0fe6bc1..11430388f5 100644
--- a/cpu/74xx_7xx/start.S
+++ b/cpu/74xx_7xx/start.S
@@ -44,7 +44,8 @@
 
 #if !defined(CONFIG_DB64360) && \
     !defined(CONFIG_DB64460) && \
-    !defined(CONFIG_CPCI750)
+    !defined(CONFIG_CPCI750) && \
+    !defined(CONFIG_P3Mx)
 #include <galileo/gt64260R.h>
 #endif
 
@@ -270,7 +271,7 @@ in_flash:
 	 * gt-regs BAT can be reused after board_init_f calls
 	 * board_early_init_f (EVB only).
 	 */
-#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC)
+#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) && !defined(CONFIG_P3Mx)
 	/* enable address translation */
 	bl	enable_addr_trans
 	sync
@@ -757,7 +758,8 @@ in_ram:
     defined(CONFIG_DB64360)	 || \
     defined(CONFIG_DB64460)      || \
     defined(CONFIG_CPCI750)	|| \
-    defined(CONFIG_PPMC7XX)
+    defined(CONFIG_PPMC7XX)     || \
+    defined(CONFIG_P3Mx)
 	mr	r4, r9		/* Use RAM copy of the global data */
 #endif
 	bl	after_reloc
-- 
cgit v1.2.1


From 726e90aacf0b1ecb0e7055be574622fbe3e450ba Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Wed, 29 Nov 2006 16:23:42 +0100
Subject: [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals

The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
not the XLB frequency.

This patch depends on the previous patches for MPC52xx device tree support

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
---
 cpu/mpc5xxx/cpu.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'cpu')

diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index 20e6735de4..813aa7935d 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -112,21 +112,20 @@ void
 ft_cpu_setup(void *blob, bd_t *bd)
 {
 	u32 *p;
-	ulong clock;
 	int len;
 
-	clock = bd->bi_busfreq;
+	/* Core XLB bus frequency */
 	p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
 	if (p != NULL)
-		*p = cpu_to_be32(clock);
+		*p = cpu_to_be32(bd->bi_busfreq);
 
+	/* SOC peripherals use the IPB bus frequency */
 	p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len);
 	if (p != NULL)
-		*p = cpu_to_be32(clock);
+		*p = cpu_to_be32(bd->bi_ipbfreq);
 
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len);
 	if (p != NULL)
 		memcpy(p, bd->bi_enetaddr, 6);
-
 }
 #endif
-- 
cgit v1.2.1


From dd520bf314c7add4183c5191692180f576f96b60 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.denx.de>
Date: Thu, 30 Nov 2006 18:02:20 +0100
Subject: Code cleanup.

---
 cpu/74xx_7xx/cpu.c      |  2 +-
 cpu/mpc83xx/spd_sdram.c | 20 ++++++++++----------
 2 files changed, 11 insertions(+), 11 deletions(-)

(limited to 'cpu')

diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c
index d98831cb48..f4e5fc504b 100644
--- a/cpu/74xx_7xx/cpu.c
+++ b/cpu/74xx_7xx/cpu.c
@@ -229,7 +229,7 @@ soft_restart(unsigned long addr)
 void
 do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-    	ulong addr;
+	ulong addr;
 	/* flush and disable I/D cache */
 	__asm__ __volatile__ ("mfspr	3, 1008"	::: "r3");
 	__asm__ __volatile__ ("ori	5, 5, 0xcc00"	::: "r5");
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index cfc42c4a83..0d93f2e1ea 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -117,7 +117,7 @@ long int spd_sdram()
 	unsigned sdram_cfg;
 	unsigned int ddrc_ecc_enable;
 
-        /* Read SPD parameters with I2C */
+	/* Read SPD parameters with I2C */
 	CFG_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
 #ifdef SPD_DEBUG
 	spd_debug(&spd);
@@ -147,7 +147,7 @@ long int spd_sdram()
 							 spd.ncol_addr);
 		return 0;
 	}
-        /* Setup DDR chip select register */
+	/* Setup DDR chip select register */
 #ifdef CFG_83XX_DDR_USES_CS0
 	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
 	ddr->cs_config[0] = ( 1 << 31
@@ -218,13 +218,13 @@ long int spd_sdram()
 	 *	CAS Lat	 DDR I	   Ctrl
 	 *	Clocks	 SPD Bit   Value
 	 *	-------+--------+---------
-	 *	1.0        0        001
-	 *	1.5        1        010
-	 *	2.0        2        011
-	 *	2.5        3        100
-	 *	3.0        4        101
-	 *	3.5        5        110
-	 *	4.0        6        111
+	 *	1.0	   0	    001
+	 *	1.5	   1	    010
+	 *	2.0	   2	    011
+	 *	2.5	   3	    100
+	 *	3.0	   4	    101
+	 *	3.5	   5	    110
+	 *	4.0	   6	    111
 	 */
 	caslat = __ilog2(spd.cas_lat);
 
@@ -442,7 +442,7 @@ long int spd_sdram()
 
 	/* SS_EN = 0, source synchronous disable
 	 * CLK_ADJST = 0, MCK/MCK# is launched aligned with addr/cmd
-         */
+	 */
 	ddr->sdram_clk_cntl = 0x00000000;
 	debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
 
-- 
cgit v1.2.1