From d38da537943cd36356b9d3d9d9b60533554b81d8 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 23 Jan 2008 17:20:14 +0100 Subject: AVR32: Make SDRAM refresh rate configurable The existing code assumes the SDRAM row refresh period should always be 15.6 us. This is not always true, and indeed on the ATNGW100, the refresh rate should really be 7.81 us. Add a refresh_period member to struct sdram_info and initialize it properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will panic() until the refresh_period member is updated properly. Big thanks to Gerhard Berghofer for pointing out this issue. Signed-off-by: Haavard Skinnemoen --- cpu/at32ap/hsdramc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'cpu') diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c index a936e03166..1fcfe75d74 100644 --- a/cpu/at32ap/hsdramc.c +++ b/cpu/at32ap/hsdramc.c @@ -38,6 +38,10 @@ unsigned long sdram_init(const struct sdram_info *info) unsigned long bus_hz; unsigned int i; + if (!info->refresh_period) + panic("ERROR: SDRAM refresh period == 0. " + "Please update the board code\n"); + tmp = (HSDRAMC1_BF(NC, info->col_bits - 8) | HSDRAMC1_BF(NR, info->row_bits - 11) | HSDRAMC1_BF(NB, info->bank_bits - 1) @@ -113,7 +117,7 @@ unsigned long sdram_init(const struct sdram_info *info) * 15.6 us is a typical value for a burst of length one */ bus_hz = get_sdram_clk_rate(); - hsdramc1_writel(TR, (156 * (bus_hz / 1000)) / 10000); + hsdramc1_writel(TR, info->refresh_period); printf("SDRAM: %u MB at address 0x%08lx\n", sdram_size >> 20, info->phys_addr); -- cgit v1.2.1