From 10a03382f0f8e774e58df7143e1a8ea52903ae1f Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 12 May 2016 13:32:56 -0600 Subject: ARM: tegra: add p2771-0000 board support P2771-0000 is a P3310 CPU board married to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet, USB3 host port, SATA, PCIe, and two GPIO expansion headers. Currently, due to U-Boot's level of support for Tegra186, the only features supported by U-Boot are the console UART and the on-board eMMC. Additional features will be added over time. U-Boot has so far been tested by replacing the kernel image on the device with a U-Boot binary. It is anticipated that U-Boot will eventually replace the CCPLEX bootloader binary, as on previous chips. This hasn't yet been tested. Signed-off-by: Stephen Warren Reviewed-by: Simon Glass Signed-off-by: Tom Warren --- configs/p2771-0000_defconfig | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 configs/p2771-0000_defconfig (limited to 'configs') diff --git a/configs/p2771-0000_defconfig b/configs/p2771-0000_defconfig new file mode 100644 index 0000000000..9f2c418f9f --- /dev/null +++ b/configs/p2771-0000_defconfig @@ -0,0 +1,31 @@ +CONFIG_ARM=y +CONFIG_TEGRA=y +CONFIG_TEGRA186=y +CONFIG_TARGET_P2771_0000=y +CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000" +CONFIG_OF_SYSTEM_SETUP=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_PROMPT="Tegra186 (P2771-0000) # " +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_FPGA is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +# CONFIG_CMD_NFS is not set +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_DM_USB=y -- cgit v1.2.1