From 5d6050fdb8b0aaf3d3c43b3cad68d6b8f5037f9a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 10 Dec 2014 10:15:23 +0100 Subject: arm: mx6: Add Barco platinum-picon and platinum-titanium This patch adds the new Barco platinum platform. It currently includes those two boards: platinum-titanium ----------------- This is the same board as the titanium that is already supported in mainline U-Boot. But its now moved to this new platform to support multiple "flavors" of imx6 boards in one directory. Its also moved to support SPL booting. And with this we use the run-time DDR configuration of this SPL support. The board is equipped with the Micron MT41J128M16JT-125 DDR chips. We now can remove the DDR related registers tuples from the imximage.cfg file. As all this is done in the SPL at run-time. platinum-picon -------------- This board is new and based on the MX6DL with 1GiB DDR using the Micron MT41K256M16HA DDR3 chips. Its also equipped with 2 NAND chips (each 512MiB). Signed-off-by: Stefan Roese Cc: Stefano Babic Cc: Pieter Ronsijn --- configs/platinum_titanium_defconfig | 4 ++++ 1 file changed, 4 insertions(+) create mode 100644 configs/platinum_titanium_defconfig (limited to 'configs/platinum_titanium_defconfig') diff --git a/configs/platinum_titanium_defconfig b/configs/platinum_titanium_defconfig new file mode 100644 index 0000000000..db8cef9cf4 --- /dev/null +++ b/configs/platinum_titanium_defconfig @@ -0,0 +1,4 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6Q" ++S:CONFIG_ARM=y ++S:CONFIG_TARGET_PLATINUM_TITANIUM=y -- cgit v1.2.1