From 9aac7d0ec96923a39f8d234f82b82bec5c13f183 Mon Sep 17 00:00:00 2001 From: Madan Srinivas Date: Thu, 19 May 2016 19:10:47 -0500 Subject: ti: AM43xx: Use CONFIG options from SOC Kconfig Updates configs/am43xx_evm.h to use CONFIG options from SOC specific Kconfig file for various calculations. On AM43x devices, the address of SPL entry point depends on the device type, i.e. whether it is secure or non-secure. Further, for non-secure devices, the SPL entry point is different between USB HOST boot mode, other "memory" boot modes (MMC, NAND) and "peripheral" boot modes (UART, USB) To add to the complexity, on secure devices, in addition to the above differences, the SPL entry point can change because of the space occupied by other components (other than u-boot or spl) that go into a secure boot image. To prevent the user from having to modify source files every time any component of the secure image changes, the value of CONFIG_SPL_TEXT_BASE has been set using a Kconfig option that is supplied in the am43xx_*_defconfig files Using the CONFIG options also enables us to do away with some compile time flags that were used to specify CONFIG_SPL_TEXT_BASE for different boot modes. On QSPI devices, the same problem described above occurs w.r.t. the address of the u-boot entry point in flash, when booting secure devices. To handle this, CONFIG_SYS_TEXT_BASE is also setup via a Kconfig option and the defconfig files. Signed-off-by: Madan Srinivas Signed-off-by: Daniel Allred Reviewed-by: Lokesh Vutla Tested-by: Andreas Dannenberg Reviewed-by: Tom Rini --- configs/am43xx_evm_qspiboot_defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'configs/am43xx_evm_qspiboot_defconfig') diff --git a/configs/am43xx_evm_qspiboot_defconfig b/configs/am43xx_evm_qspiboot_defconfig index 4bc75e7117..5f90e2bef1 100644 --- a/configs/am43xx_evm_qspiboot_defconfig +++ b/configs/am43xx_evm_qspiboot_defconfig @@ -1,6 +1,7 @@ CONFIG_ARM=y CONFIG_AM43XX=y CONFIG_TARGET_AM43XX_EVM=y +CONFIG_ISW_ENTRY_ADDR=0x30000000 CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT" CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y -- cgit v1.2.1