From 9f670540143bb43cf6e659aba26b59ee76e845eb Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Tue, 16 Oct 2012 04:02:20 +0000 Subject: OMAP3: mt_ventoux: power on USB at startup Updated revision of the board uses GPIOs to activate the USB ports. Signed-off-by: Stefano Babic --- board/teejet/mt_ventoux/mt_ventoux.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'board') diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index ecb9b6c413..9622a81280 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -45,6 +45,8 @@ DECLARE_GLOBAL_DATA_PTR; #define BUZZER 140 #define SPEAKER 141 +#define USB1_PWR 127 +#define USB2_PWR 149 #ifndef CONFIG_FPGA #error "The Teejet mt_ventoux must have CONFIG_FPGA enabled" @@ -247,6 +249,12 @@ int board_init(void) gpio_direction_output(BUZZER, 0); gpio_direction_output(SPEAKER, 0); + /* Activate USB power */ + gpio_request(USB1_PWR, "USB1_PWR"); + gpio_request(USB2_PWR, "USB2_PWR"); + gpio_direction_output(USB1_PWR, 1); + gpio_direction_output(USB2_PWR, 1); + return 0; } -- cgit v1.2.1 From e47c9e8608df6c95b6a324925573bac12045e059 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Tue, 16 Oct 2012 04:07:03 +0000 Subject: OMAP3: updated pinmux and environment for new revision of mcx board The mcx board was slightly modified and the pinmux must be updated. There is no need to support the old board, that becomes obsolete. Signed-off-by: Stefano Babic --- board/htkw/mcx/mcx.h | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'board') diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h index 867cc9e88d..1003bfddd9 100644 --- a/board/htkw/mcx/mcx.h +++ b/board/htkw/mcx/mcx.h @@ -143,28 +143,28 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA0), (IEN | PTU | EN | M4))\ - MUX_VAL(CP(DSS_DATA1), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA2), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA8), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA9), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA16), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA17), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA18), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \ /* CAMERA */\ @@ -313,11 +313,11 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \ MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \ /* HECC */\ - MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M4)) \ + MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M0)) \ /* HSUSB */\ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(HSUSB0_STP), (IEN | PTU | DIS | M0)) \ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \ -- cgit v1.2.1 From 8c735b990989bcd3909081aff7e6913222ac38e9 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Tue, 16 Oct 2012 04:07:04 +0000 Subject: OMAP3: mcx: updated to new hardware revision Some GPIOs differ in the new revision board. Previous revision are considered obsolete and they will not anymore supported. Signed-off-by: Stefano Babic --- board/htkw/mcx/mcx.c | 19 +++---------------- board/htkw/mcx/mcx.h | 2 +- 2 files changed, 4 insertions(+), 17 deletions(-) (limited to 'board') diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c index 7c9d34ab84..1f9840c34d 100644 --- a/board/htkw/mcx/mcx.c +++ b/board/htkw/mcx/mcx.c @@ -37,12 +37,12 @@ DECLARE_GLOBAL_DATA_PTR; -#define HOT_WATER_BUTTON 38 +#define HOT_WATER_BUTTON 42 #ifdef CONFIG_USB_EHCI static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, }; @@ -87,6 +87,7 @@ int board_late_init(void) return 0; setenv("bootcmd", "run swupdate"); + return 0; } #endif @@ -108,17 +109,3 @@ int board_mmc_init(bd_t *bis) return omap_mmc_init(0, 0, 0); } #endif - -#ifdef CONFIG_USB_EHCI_OMAP -#define USB_HOST_PWR_EN 132 -int board_usb_init(void) -{ - if (gpio_request(USB_HOST_PWR_EN, "USB_HOST_PWR_EN") < 0) { - puts("Failed to get USB_HOST_PWR_EN pin\n"); - return -ENODEV; - } - gpio_direction_output(USB_HOST_PWR_EN, 1); - - return 0; -} -#endif diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h index 1003bfddd9..f9601c641f 100644 --- a/board/htkw/mcx/mcx.h +++ b/board/htkw/mcx/mcx.h @@ -96,7 +96,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(GPMC_A7), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(GPMC_A8), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(GPMC_A9), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | DIS | M4)) \ + MUX_VAL(CP(GPMC_A10), (IEN | PTU | EN | M4)) \ /* GPIO_43 LCD buffer enable */ \ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \ -- cgit v1.2.1 From 8f1fae26a7fb4c0c2897f2f086fe8a3e1da58a9a Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Sat, 20 Oct 2012 23:56:07 +0000 Subject: OMAP3: add video support to the mcx board Add video support to the board with the display focaltech etm070003dh6. Signed-off-by: Stefano Babic --- board/htkw/mcx/mcx.c | 41 +++++++++++++++++++++++++++++++++++++++++ board/htkw/mcx/mcx.h | 2 ++ 2 files changed, 43 insertions(+) (limited to 'board') diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c index 1f9840c34d..9fe6408ecf 100644 --- a/board/htkw/mcx/mcx.c +++ b/board/htkw/mcx/mcx.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #include "errno.h" #include #ifdef CONFIG_USB_EHCI @@ -38,6 +40,10 @@ DECLARE_GLOBAL_DATA_PTR; #define HOT_WATER_BUTTON 42 +#define LCD_OUTPUT 55 + +/* Address of the framebuffer in RAM. */ +#define FB_START_ADDRESS 0x88000000 #ifdef CONFIG_USB_EHCI static struct omap_usbhs_board_data usbhs_bdata = { @@ -67,6 +73,8 @@ int board_init(void) /* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + gpio_direction_output(LCD_OUTPUT, 0); + return 0; } @@ -109,3 +117,36 @@ int board_mmc_init(bd_t *bis) return omap_mmc_init(0, 0, 0); } #endif + +#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) + +static struct panel_config lcd_cfg = { + .timing_h = PANEL_TIMING_H(40, 40, 48), + .timing_v = PANEL_TIMING_V(29, 13, 3), + .pol_freq = 0x00003000, /* Pol Freq */ + .divisor = 0x0001000E, + .panel_type = 0x01, /* TFT */ + .data_lines = 0x03, /* 24 Bit RGB */ + .load_mode = 0x02, /* Frame Mode */ + .panel_color = 0, + .lcd_size = PANEL_LCD_SIZE(800, 480), +}; + +int board_video_init(void) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + void *fb; + + fb = (void *)FB_START_ADDRESS; + + lcd_cfg.frame_buffer = fb; + + setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON); + setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON); + + omap3_dss_panel_config(&lcd_cfg); + omap3_dss_enable(); + + return 0; +} +#endif diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h index f9601c641f..0d4c642203 100644 --- a/board/htkw/mcx/mcx.h +++ b/board/htkw/mcx/mcx.h @@ -264,6 +264,8 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M4)) \ + /* GPIO_170 Touchscreen ISR */\ /* McSPI */\ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \ -- cgit v1.2.1 From e363426e999b786ee4791f49d90ae84a3210f7b8 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 18 Oct 2012 01:21:09 +0000 Subject: am33xx: move ti i2c baseboard header handling to board/ti/am335x/ The i2c header is specific to ti(-derived) boards, and not generic for all am335x boards. Signed-off-by: Peter Korsgaard [trini: Make re-apply with rtc32k_enable() applied] Signed-off-by: Tom Rini --- board/ti/am335x/Makefile | 1 + board/ti/am335x/board.c | 299 +++++++++++++++++++++++++++++++++++++++++++++++ board/ti/am335x/board.h | 49 ++++++++ board/ti/am335x/mux.c | 1 + 4 files changed, 350 insertions(+) create mode 100644 board/ti/am335x/board.c create mode 100644 board/ti/am335x/board.h (limited to 'board') diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile index ca50eef613..67a87a1aaf 100644 --- a/board/ti/am335x/Makefile +++ b/board/ti/am335x/Makefile @@ -22,6 +22,7 @@ ifdef CONFIG_SPL_BUILD COBJS := mux.o endif +COBJS += board.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c new file mode 100644 index 0000000000..5279d1a4a3 --- /dev/null +++ b/board/ti/am335x/board.c @@ -0,0 +1,299 @@ +/* + * board.c + * + * Board functions for TI AM335X based boards + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; +#ifdef CONFIG_SPL_BUILD +static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; +#endif + +/* MII mode defines */ +#define MII_MODE_ENABLE 0x0 +#define RGMII_MODE_ENABLE 0xA + +/* GPIO that controls power to DDR on EVM-SK */ +#define GPIO_DDR_VTT_EN 7 + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +static struct am335x_baseboard_id __attribute__((section (".data"))) header; + +static inline int board_is_bone(void) +{ + return !strncmp(header.name, "A335BONE", HDR_NAME_LEN); +} + +static inline int board_is_bone_lt(void) +{ + return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN); +} + +static inline int board_is_evm_sk(void) +{ + return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); +} + +/* + * Read header information from EEPROM into global structure. + */ +static int read_eeprom(void) +{ + /* Check if baseboard eeprom is available */ + if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { + puts("Could not probe the EEPROM; something fundamentally " + "wrong on the I2C bus.\n"); + return -ENODEV; + } + + /* read the eeprom using i2c */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header, + sizeof(header))) { + puts("Could not read the EEPROM; something fundamentally" + " wrong on the I2C bus.\n"); + return -EIO; + } + + if (header.magic != 0xEE3355AA) { + /* + * read the eeprom using i2c again, + * but use only a 1 byte address + */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, + (uchar *)&header, sizeof(header))) { + puts("Could not read the EEPROM; something " + "fundamentally wrong on the I2C bus.\n"); + return -EIO; + } + + if (header.magic != 0xEE3355AA) { + printf("Incorrect magic number (0x%x) in EEPROM\n", + header.magic); + return -EINVAL; + } + } + + return 0; +} + +/* UART Defines */ +#ifdef CONFIG_SPL_BUILD +#define UART_RESET (0x1 << 1) +#define UART_CLK_RUNNING_MASK 0x1 +#define UART_SMART_IDLE_EN (0x1 << 0x3) + +static void rtc32k_enable(void) +{ + struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE; + + /* + * Unlock the RTC's registers. For more details please see the + * RTC_SS section of the TRM. In order to unlock we need to + * write these specific values (keys) in this order. + */ + writel(0x83e70b13, &rtc->kick0r); + writel(0x95a4f1e0, &rtc->kick1r); + + /* Enable the RTC 32K OSC by setting bits 3 and 6. */ + writel((1 << 3) | (1 << 6), &rtc->osc); +} +#endif + +/* + * Determine what type of DDR we have. + */ +static short inline board_memory_type(void) +{ + /* The following boards are known to use DDR3. */ + if (board_is_evm_sk() || board_is_bone_lt()) + return EMIF_REG_SDRAM_TYPE_DDR3; + + return EMIF_REG_SDRAM_TYPE_DDR2; +} + +/* + * early system init of muxing and clocks. + */ +void s_init(void) +{ + /* WDT1 is already running when the bootloader gets control + * Disable it to avoid "random" resets + */ + writel(0xAAAA, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + writel(0x5555, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + +#ifdef CONFIG_SPL_BUILD + /* Setup the PLLs and the clocks for the peripherals */ + pll_init(); + + /* Enable RTC32K clock */ + rtc32k_enable(); + + /* UART softreset */ + u32 regVal; + + enable_uart0_pin_mux(); + + regVal = readl(&uart_base->uartsyscfg); + regVal |= UART_RESET; + writel(regVal, &uart_base->uartsyscfg); + while ((readl(&uart_base->uartsyssts) & + UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) + ; + + /* Disable smart idle */ + regVal = readl(&uart_base->uartsyscfg); + regVal |= UART_SMART_IDLE_EN; + writel(regVal, &uart_base->uartsyscfg); + + gd = &gdata; + + preloader_console_init(); + + /* Initalize the board header */ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + enable_board_pin_mux(&header); + if (board_is_evm_sk()) { + /* + * EVM SK 1.2A and later use gpio0_7 to enable DDR3. + * This is safe enough to do on older revs. + */ + gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); + gpio_direction_output(GPIO_DDR_VTT_EN, 1); + } + + config_ddr(board_memory_type()); +#endif +} + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_DRIVER_TI_CPSW +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_id = 1, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = AM335X_CPSW_MDIO_BASE, + .cpsw_base = AM335X_CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +int board_eth_init(bd_t *bis) +{ + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + debug(" not set. Reading from E-fuse\n"); + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + else + return -1; + } + + if (board_is_bone() || board_is_bone_lt()) { + writel(MII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = + PHY_INTERFACE_MODE_MII; + } else { + writel(RGMII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = + PHY_INTERFACE_MODE_RGMII; + } + + return cpsw_register(&cpsw_data); +} +#endif diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h new file mode 100644 index 0000000000..7985ab2c14 --- /dev/null +++ b/board/ti/am335x/board.h @@ -0,0 +1,49 @@ +/* + * board.h + * + * TI AM335x boards information header + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * TI AM335x parts define a system EEPROM that defines certain sub-fields. + * We use these fields to in turn see what board we are on, and what + * that might require us to set or not set. + */ +#define HDR_NO_OF_MAC_ADDR 3 +#define HDR_ETH_ALEN 6 +#define HDR_NAME_LEN 8 + +struct am335x_baseboard_id { + unsigned int magic; + char name[HDR_NAME_LEN]; + char version[4]; + char serial[12]; + char config[32]; + char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; +}; + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(struct am335x_baseboard_id *header); +#endif diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 80becd5c7a..82bb9fd3ba 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -18,6 +18,7 @@ #include #include #include +#include "board.h" #define MUX_CFG(value, offset) \ __raw_writel(value, (CTRL_BASE + offset)); -- cgit v1.2.1 From 7f26a5a26f2c24a29a120702f2607e99ac8e1fef Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 18 Oct 2012 01:21:11 +0000 Subject: am33xx: move generic parts of pinmux handling out from board/ti/am335x So they are available for other boards. Signed-off-by: Peter Korsgaard --- board/ti/am335x/mux.c | 249 +------------------------------------------------- 1 file changed, 1 insertion(+), 248 deletions(-) (limited to 'board') diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 82bb9fd3ba..29929791fc 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -16,244 +16,11 @@ #include #include #include +#include #include #include #include "board.h" -#define MUX_CFG(value, offset) \ - __raw_writel(value, (CTRL_BASE + offset)); - -/* PAD Control Fields */ -#define SLEWCTRL (0x1 << 6) -#define RXACTIVE (0x1 << 5) -#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */ -#define PULLUDEN (0x0 << 3) /* Pull up enabled */ -#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ -#define MODE(val) val /* used for Readability */ - -/* - * PAD CONTROL OFFSETS - * Field names corresponds to the pad signal name - */ -struct pad_signals { - int gpmc_ad0; - int gpmc_ad1; - int gpmc_ad2; - int gpmc_ad3; - int gpmc_ad4; - int gpmc_ad5; - int gpmc_ad6; - int gpmc_ad7; - int gpmc_ad8; - int gpmc_ad9; - int gpmc_ad10; - int gpmc_ad11; - int gpmc_ad12; - int gpmc_ad13; - int gpmc_ad14; - int gpmc_ad15; - int gpmc_a0; - int gpmc_a1; - int gpmc_a2; - int gpmc_a3; - int gpmc_a4; - int gpmc_a5; - int gpmc_a6; - int gpmc_a7; - int gpmc_a8; - int gpmc_a9; - int gpmc_a10; - int gpmc_a11; - int gpmc_wait0; - int gpmc_wpn; - int gpmc_be1n; - int gpmc_csn0; - int gpmc_csn1; - int gpmc_csn2; - int gpmc_csn3; - int gpmc_clk; - int gpmc_advn_ale; - int gpmc_oen_ren; - int gpmc_wen; - int gpmc_be0n_cle; - int lcd_data0; - int lcd_data1; - int lcd_data2; - int lcd_data3; - int lcd_data4; - int lcd_data5; - int lcd_data6; - int lcd_data7; - int lcd_data8; - int lcd_data9; - int lcd_data10; - int lcd_data11; - int lcd_data12; - int lcd_data13; - int lcd_data14; - int lcd_data15; - int lcd_vsync; - int lcd_hsync; - int lcd_pclk; - int lcd_ac_bias_en; - int mmc0_dat3; - int mmc0_dat2; - int mmc0_dat1; - int mmc0_dat0; - int mmc0_clk; - int mmc0_cmd; - int mii1_col; - int mii1_crs; - int mii1_rxerr; - int mii1_txen; - int mii1_rxdv; - int mii1_txd3; - int mii1_txd2; - int mii1_txd1; - int mii1_txd0; - int mii1_txclk; - int mii1_rxclk; - int mii1_rxd3; - int mii1_rxd2; - int mii1_rxd1; - int mii1_rxd0; - int rmii1_refclk; - int mdio_data; - int mdio_clk; - int spi0_sclk; - int spi0_d0; - int spi0_d1; - int spi0_cs0; - int spi0_cs1; - int ecap0_in_pwm0_out; - int uart0_ctsn; - int uart0_rtsn; - int uart0_rxd; - int uart0_txd; - int uart1_ctsn; - int uart1_rtsn; - int uart1_rxd; - int uart1_txd; - int i2c0_sda; - int i2c0_scl; - int mcasp0_aclkx; - int mcasp0_fsx; - int mcasp0_axr0; - int mcasp0_ahclkr; - int mcasp0_aclkr; - int mcasp0_fsr; - int mcasp0_axr1; - int mcasp0_ahclkx; - int xdma_event_intr0; - int xdma_event_intr1; - int nresetin_out; - int porz; - int nnmi; - int osc0_in; - int osc0_out; - int rsvd1; - int tms; - int tdi; - int tdo; - int tck; - int ntrst; - int emu0; - int emu1; - int osc1_in; - int osc1_out; - int pmic_power_en; - int rtc_porz; - int rsvd2; - int ext_wakeup; - int enz_kaldo_1p8v; - int usb0_dm; - int usb0_dp; - int usb0_ce; - int usb0_id; - int usb0_vbus; - int usb0_drvvbus; - int usb1_dm; - int usb1_dp; - int usb1_ce; - int usb1_id; - int usb1_vbus; - int usb1_drvvbus; - int ddr_resetn; - int ddr_csn0; - int ddr_cke; - int ddr_ck; - int ddr_nck; - int ddr_casn; - int ddr_rasn; - int ddr_wen; - int ddr_ba0; - int ddr_ba1; - int ddr_ba2; - int ddr_a0; - int ddr_a1; - int ddr_a2; - int ddr_a3; - int ddr_a4; - int ddr_a5; - int ddr_a6; - int ddr_a7; - int ddr_a8; - int ddr_a9; - int ddr_a10; - int ddr_a11; - int ddr_a12; - int ddr_a13; - int ddr_a14; - int ddr_a15; - int ddr_odt; - int ddr_d0; - int ddr_d1; - int ddr_d2; - int ddr_d3; - int ddr_d4; - int ddr_d5; - int ddr_d6; - int ddr_d7; - int ddr_d8; - int ddr_d9; - int ddr_d10; - int ddr_d11; - int ddr_d12; - int ddr_d13; - int ddr_d14; - int ddr_d15; - int ddr_dqm0; - int ddr_dqm1; - int ddr_dqs0; - int ddr_dqsn0; - int ddr_dqs1; - int ddr_dqsn1; - int ddr_vref; - int ddr_vtp; - int ddr_strben0; - int ddr_strben1; - int ain7; - int ain6; - int ain5; - int ain4; - int ain3; - int ain2; - int ain1; - int ain0; - int vrefp; - int vrefn; -}; - -struct module_pin_mux { - short reg_offset; - unsigned char val; -}; - -/* Pad control register offset */ -#define PAD_CTRL_BASE 0x800 -#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \ - (PAD_CTRL_BASE))->x) - static struct module_pin_mux uart0_pin_mux[] = { {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ @@ -363,20 +130,6 @@ static struct module_pin_mux mii1_pin_mux[] = { {-1}, }; -/* - * Configure the pin mux for the module - */ -static void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux) -{ - int i; - - if (!mod_pin_mux) - return; - - for (i = 0; mod_pin_mux[i].reg_offset != -1; i++) - MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset); -} - void enable_uart0_pin_mux(void) { configure_module_pin_mux(uart0_pin_mux); -- cgit v1.2.1 From c00f69dbcd4a5e59d381274743b78e62485c5e4a Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 18 Oct 2012 01:21:12 +0000 Subject: am33xx: support board specific ddr settings Move the hardcoded ddr2/ddr3 settings for the ti boards to board code, so other boards can use different types/timings. Signed-off-by: Peter Korsgaard [trini: Make apply with rtc32k_enable() in the file] Signed-off-by: Tom Rini --- board/ti/am335x/board.c | 89 ++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 77 insertions(+), 12 deletions(-) (limited to 'board') diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 5279d1a4a3..309a425a17 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -131,19 +131,79 @@ static void rtc32k_enable(void) /* Enable the RTC 32K OSC by setting bits 3 and 6. */ writel((1 << 3) | (1 << 6), &rtc->osc); } -#endif -/* - * Determine what type of DDR we have. - */ -static short inline board_memory_type(void) -{ - /* The following boards are known to use DDR3. */ - if (board_is_evm_sk() || board_is_bone_lt()) - return EMIF_REG_SDRAM_TYPE_DDR3; +static const struct ddr_data ddr2_data = { + .datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20) + |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)), + .datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20) + |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)), + .datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20) + |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)), + .datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20) + |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)), + .datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20) + |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)), + .datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20) + |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)), + .datauserank0delay = DDR2_PHY_RANK0_DELAY, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; - return EMIF_REG_SDRAM_TYPE_DDR2; -} +static const struct cmd_control ddr2_cmd_ctrl_data = { + .cmd0csratio = DDR2_RATIO, + .cmd0dldiff = DDR2_DLL_LOCK_DIFF, + .cmd0iclkout = DDR2_INVERT_CLKOUT, + + .cmd1csratio = DDR2_RATIO, + .cmd1dldiff = DDR2_DLL_LOCK_DIFF, + .cmd1iclkout = DDR2_INVERT_CLKOUT, + + .cmd2csratio = DDR2_RATIO, + .cmd2dldiff = DDR2_DLL_LOCK_DIFF, + .cmd2iclkout = DDR2_INVERT_CLKOUT, +}; + +static const struct emif_regs ddr2_emif_reg_data = { + .sdram_config = DDR2_EMIF_SDCFG, + .ref_ctrl = DDR2_EMIF_SDREF, + .sdram_tim1 = DDR2_EMIF_TIM1, + .sdram_tim2 = DDR2_EMIF_TIM2, + .sdram_tim3 = DDR2_EMIF_TIM3, + .emif_ddr_phy_ctlr_1 = DDR2_EMIF_READ_LATENCY, +}; + +static const struct ddr_data ddr3_data = { + .datardsratio0 = DDR3_RD_DQS, + .datawdsratio0 = DDR3_WR_DQS, + .datafwsratio0 = DDR3_PHY_FIFO_WE, + .datawrsratio0 = DDR3_PHY_WR_DATA, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = DDR3_RATIO, + .cmd0dldiff = DDR3_DLL_LOCK_DIFF, + .cmd0iclkout = DDR3_INVERT_CLKOUT, + + .cmd1csratio = DDR3_RATIO, + .cmd1dldiff = DDR3_DLL_LOCK_DIFF, + .cmd1iclkout = DDR3_INVERT_CLKOUT, + + .cmd2csratio = DDR3_RATIO, + .cmd2dldiff = DDR3_DLL_LOCK_DIFF, + .cmd2iclkout = DDR3_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = DDR3_EMIF_SDCFG, + .ref_ctrl = DDR3_EMIF_SDREF, + .sdram_tim1 = DDR3_EMIF_TIM1, + .sdram_tim2 = DDR3_EMIF_TIM2, + .sdram_tim3 = DDR3_EMIF_TIM3, + .zq_config = DDR3_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = DDR3_EMIF_READ_LATENCY, +}; +#endif /* * early system init of muxing and clocks. @@ -204,7 +264,12 @@ void s_init(void) gpio_direction_output(GPIO_DDR_VTT_EN, 1); } - config_ddr(board_memory_type()); + if (board_is_evm_sk() || board_is_bone_lt()) + config_ddr(303, DDR3_IOCTRL_VALUE, &ddr3_data, + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data); + else + config_ddr(266, DDR2_IOCTRL_VALUE, &ddr2_data, + &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data); #endif } -- cgit v1.2.1 From c7d35bef255dedb3ec3856982f042dde514676b0 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Thu, 18 Oct 2012 01:21:13 +0000 Subject: am33xx/ddr_defs.h: rename DDR2/DDR3 defines to their actual part numbers So other parts can be added. Signed-off-by: Peter Korsgaard --- board/ti/am335x/board.c | 112 +++++++++++++++++++++++++++--------------------- 1 file changed, 62 insertions(+), 50 deletions(-) (limited to 'board') diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 309a425a17..5d279ecdbc 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -133,75 +133,87 @@ static void rtc32k_enable(void) } static const struct ddr_data ddr2_data = { - .datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20) - |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)), - .datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20) - |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)), - .datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20) - |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)), - .datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20) - |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)), - .datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20) - |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)), - .datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20) - |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)), - .datauserank0delay = DDR2_PHY_RANK0_DELAY, + .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | + (MT47H128M16RT25E_RD_DQS<<20) | + (MT47H128M16RT25E_RD_DQS<<10) | + (MT47H128M16RT25E_RD_DQS<<0)), + .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | + (MT47H128M16RT25E_WR_DQS<<20) | + (MT47H128M16RT25E_WR_DQS<<10) | + (MT47H128M16RT25E_WR_DQS<<0)), + .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | + (MT47H128M16RT25E_PHY_WRLVL<<20) | + (MT47H128M16RT25E_PHY_WRLVL<<10) | + (MT47H128M16RT25E_PHY_WRLVL<<0)), + .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | + (MT47H128M16RT25E_PHY_GATELVL<<20) | + (MT47H128M16RT25E_PHY_GATELVL<<10) | + (MT47H128M16RT25E_PHY_GATELVL<<0)), + .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | + (MT47H128M16RT25E_PHY_FIFO_WE<<20) | + (MT47H128M16RT25E_PHY_FIFO_WE<<10) | + (MT47H128M16RT25E_PHY_FIFO_WE<<0)), + .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | + (MT47H128M16RT25E_PHY_WR_DATA<<20) | + (MT47H128M16RT25E_PHY_WR_DATA<<10) | + (MT47H128M16RT25E_PHY_WR_DATA<<0)), + .datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY, .datadldiff0 = PHY_DLL_LOCK_DIFF, }; static const struct cmd_control ddr2_cmd_ctrl_data = { - .cmd0csratio = DDR2_RATIO, - .cmd0dldiff = DDR2_DLL_LOCK_DIFF, - .cmd0iclkout = DDR2_INVERT_CLKOUT, + .cmd0csratio = MT47H128M16RT25E_RATIO, + .cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, + .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, - .cmd1csratio = DDR2_RATIO, - .cmd1dldiff = DDR2_DLL_LOCK_DIFF, - .cmd1iclkout = DDR2_INVERT_CLKOUT, + .cmd1csratio = MT47H128M16RT25E_RATIO, + .cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, + .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, - .cmd2csratio = DDR2_RATIO, - .cmd2dldiff = DDR2_DLL_LOCK_DIFF, - .cmd2iclkout = DDR2_INVERT_CLKOUT, + .cmd2csratio = MT47H128M16RT25E_RATIO, + .cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, + .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, }; static const struct emif_regs ddr2_emif_reg_data = { - .sdram_config = DDR2_EMIF_SDCFG, - .ref_ctrl = DDR2_EMIF_SDREF, - .sdram_tim1 = DDR2_EMIF_TIM1, - .sdram_tim2 = DDR2_EMIF_TIM2, - .sdram_tim3 = DDR2_EMIF_TIM3, - .emif_ddr_phy_ctlr_1 = DDR2_EMIF_READ_LATENCY, + .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, + .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, + .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, + .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, + .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, + .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, }; static const struct ddr_data ddr3_data = { - .datardsratio0 = DDR3_RD_DQS, - .datawdsratio0 = DDR3_WR_DQS, - .datafwsratio0 = DDR3_PHY_FIFO_WE, - .datawrsratio0 = DDR3_PHY_WR_DATA, + .datardsratio0 = MT41J128MJT125_RD_DQS, + .datawdsratio0 = MT41J128MJT125_WR_DQS, + .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE, + .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA, .datadldiff0 = PHY_DLL_LOCK_DIFF, }; static const struct cmd_control ddr3_cmd_ctrl_data = { - .cmd0csratio = DDR3_RATIO, - .cmd0dldiff = DDR3_DLL_LOCK_DIFF, - .cmd0iclkout = DDR3_INVERT_CLKOUT, + .cmd0csratio = MT41J128MJT125_RATIO, + .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF, + .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT, - .cmd1csratio = DDR3_RATIO, - .cmd1dldiff = DDR3_DLL_LOCK_DIFF, - .cmd1iclkout = DDR3_INVERT_CLKOUT, + .cmd1csratio = MT41J128MJT125_RATIO, + .cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF, + .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT, - .cmd2csratio = DDR3_RATIO, - .cmd2dldiff = DDR3_DLL_LOCK_DIFF, - .cmd2iclkout = DDR3_INVERT_CLKOUT, + .cmd2csratio = MT41J128MJT125_RATIO, + .cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF, + .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT, }; static struct emif_regs ddr3_emif_reg_data = { - .sdram_config = DDR3_EMIF_SDCFG, - .ref_ctrl = DDR3_EMIF_SDREF, - .sdram_tim1 = DDR3_EMIF_TIM1, - .sdram_tim2 = DDR3_EMIF_TIM2, - .sdram_tim3 = DDR3_EMIF_TIM3, - .zq_config = DDR3_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = DDR3_EMIF_READ_LATENCY, + .sdram_config = MT41J128MJT125_EMIF_SDCFG, + .ref_ctrl = MT41J128MJT125_EMIF_SDREF, + .sdram_tim1 = MT41J128MJT125_EMIF_TIM1, + .sdram_tim2 = MT41J128MJT125_EMIF_TIM2, + .sdram_tim3 = MT41J128MJT125_EMIF_TIM3, + .zq_config = MT41J128MJT125_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY, }; #endif @@ -265,10 +277,10 @@ void s_init(void) } if (board_is_evm_sk() || board_is_bone_lt()) - config_ddr(303, DDR3_IOCTRL_VALUE, &ddr3_data, + config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data, &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data); else - config_ddr(266, DDR2_IOCTRL_VALUE, &ddr2_data, + config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data, &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data); #endif } -- cgit v1.2.1