From bdb9f7604ddaffe623267df5c381353ac23a90a6 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 11 Apr 2012 10:22:24 +0000 Subject: mx6qsabrelite: No need to set the direction for GPIO3_23 again There is a 'gpio_direction_output(87, 0);' call previously, so the GPIO direction is already established. Use gpio_set_value() for changing the GPIO output then. Signed-off-by: Fabio Estevam Acked-by: Dirk Behme --- board/freescale/mx6qsabrelite/mx6qsabrelite.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board') diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index fda3e41a03..b4d9519747 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -135,7 +135,7 @@ static void setup_iomux_enet(void) /* Need delay 10ms according to KSZ9021 spec */ udelay(1000 * 10); - gpio_direction_output(87, 1); /* GPIO 3-23 */ + gpio_set_value(87, 1); /* GPIO 3-23 */ imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); } -- cgit v1.2.1