From 135663061ffa78c391dd502674bb50823555b675 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:36 -0700 Subject: nitrogen6x: display: add svga display (800x600) Add support for 800x600 18-bit RGB displays using VESA GTF timings. No auto-detection is supported, so you must configure this panel manually through the 'panel' environment variable: U-Boot > setenv panel svga U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index be2a41f1a4..ccbb9b7e29 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -633,6 +633,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 7, .sync = 0x40000002, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB666, + .detect = NULL, + .enable = enable_rgb, + .mode = { + .name = "svga", + .refresh = 60, + .xres = 800, + .yres = 600, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, .addr = 0x48, -- cgit v1.2.1