From a2ab6b7d320423ab4d925d75c588c2a13fce61c6 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 22 Oct 2012 06:19:36 +0000 Subject: ARM: tegra: don't request GPIO from Seaboard's SPL Seaboard has a GPIO that switches an external mux between Tegra's debug UART and SPI flash. This is initialized from the SPL so that SPL debug output can be seen. Simplify the code that does this, and don't actually request the GPIO in the SPL; just program it. This saves ~4.5K from the size of the SPL, mostly BSS due to the large gpio_names[] table that is no longer required. This makes Seaboard's SPL fit within the current max size. Signed-off-by: Stephen Warren Acked-by: Simon Glass Acked-by: Allen Martin Tested-by: Simon Glass Signed-off-by: Tom Warren --- board/nvidia/seaboard/seaboard.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'board/nvidia/seaboard') diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index ea431e9f62..c412c077da 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -35,21 +36,14 @@ /* TODO: Remove this code when the SPI switch is working */ #if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA) -/* - * Routine: gpio_config_uart_seaboard - * Description: Force GPIO_PI3 low on Seaboard so UART4 works. - */ -static void gpio_config_uart_seaboard(void) +void gpio_early_init_uart(void) { /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */ +#ifndef CONFIG_SPL_BUILD gpio_request(GPIO_PI3, NULL); +#endif gpio_direction_output(GPIO_PI3, 0); } - -void gpio_early_init_uart(void) -{ - gpio_config_uart_seaboard(); -} #endif #ifdef CONFIG_TEGRA_MMC -- cgit v1.2.1