From f14ae4180a37cf05c6bcfa5d55cc2955e920e1e2 Mon Sep 17 00:00:00 2001 From: Sascha Laue Date: Thu, 19 Aug 2010 09:38:56 +0200 Subject: ppc4xx: Big lwmon5 board support rework/update This patch brings the lwmon5 board support up-to-date. Here a summary of the changes: lwmon5 board port related: - GPIO's changed to control the LSB transmitter - Reset USB PHY's upon power-up - Enable CAN upon power-up - USB init error workaround (errata CHIP_6) - EBC: Enable burstmode and modify the timings for the GDC memory - EBC: Speed up NOR flash timings lwmon5 board POST related: - Add FPGA memory test - Add GDC memory test - DSP POST reworked - SYSMON POST: Fix handling of negative temperatures - Add output for sysmon1 POST - HW-watchdog min. time test reworked Additionally some coding-style changes were done. Signed-off-by: Sascha Laue Signed-off-by: Stefan Roese --- board/lwmon5/lwmon5.c | 249 ++++++++++++++++++++++++++++++++------------------ 1 file changed, 159 insertions(+), 90 deletions(-) (limited to 'board/lwmon5/lwmon5.c') diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 9622b70d27..dd275bf777 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2010 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -24,10 +24,13 @@ #include #include #include +#include +#include +#include DECLARE_GLOBAL_DATA_PTR; -extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ +static phys_addr_t lwmon5_cfi_flash_bank_addr[2] = CONFIG_SYS_FLASH_BANKS_LIST; ulong flash_get_size(ulong base, int banknum); int misc_init_r_kbd(void); @@ -97,16 +100,18 @@ int board_early_init_f(void) gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1); #if CONFIG_POST & CONFIG_SYS_POST_BSPEC1 - gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 1); + /* enable the LSB transmitter */ + gpio_write_bit(CONFIG_SYS_GPIO_LSB_ENABLE, 1); + /* enable the CAN transmitter */ + gpio_write_bit(CONFIG_SYS_GPIO_CAN_ENABLE, 1); reg = 0; /* reuse as counter */ out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR, in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) & ~CONFIG_SYS_DSPIC_TEST_MASK); - while (!gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) { + while (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) { udelay(1000); } - gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 0); if (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY)) { /* set "boot error" flag */ out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR, @@ -135,9 +140,61 @@ int board_early_init_f(void) return 0; } -/*---------------------------------------------------------------------------+ - | misc_init_r. - +---------------------------------------------------------------------------*/ +/* + * Override weak default with board specific version + */ +phys_addr_t cfi_flash_bank_addr(int bank) +{ + return lwmon5_cfi_flash_bank_addr[bank]; +} + +/* + * Override the weak default mapping function with a board specific one + */ +u32 flash_get_bank_size(int cs, int idx) +{ + return flash_info[idx].size; +} + +int board_early_init_r(void) +{ + u32 val0, val1; + + /* + * lwmon5 is manufactured in 2 different board versions: + * The lwmon5a board has 64MiB NOR flash instead of the + * 128MiB of the original lwmon5. Unfortunately the CFI driver + * will report 2 banks of 64MiB even for the smaller flash + * chip, since the bank is mirrored. To fix this, we bring + * one bank into CFI query mode and read its response. This + * enables us to detect the real number of flash devices/ + * banks which will be used later on by the common CFI driver. + */ + + /* Put bank 0 into CFI command mode and read */ + out_be32((void *)CONFIG_SYS_FLASH0, 0x00980098); + val0 = in_be32((void *)CONFIG_SYS_FLASH0 + FLASH_OFFSET_CFI_RESP); + val1 = in_be32((void *)CONFIG_SYS_FLASH1 + FLASH_OFFSET_CFI_RESP); + + /* Reset flash again out of query mode */ + out_be32((void *)CONFIG_SYS_FLASH0, 0x00f000f0); + + /* When not identical, we have 2 different flash devices/banks */ + if (val0 != val1) + return 0; + + /* + * Now we're sure that we're running on a LWMON5a board with + * only 64MiB NOR flash in one bank: + * + * Set flash base address and bank count for CFI driver probing. + */ + cfi_flash_num_flash_banks = 1; + lwmon5_cfi_flash_bank_addr[0] = CONFIG_SYS_FLASH0; + + return 0; +} + int misc_init_r(void) { u32 pbcr; @@ -145,7 +202,7 @@ int misc_init_r(void) u32 reg; unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; - unsigned long sdr0_pfc1; + unsigned long sdr0_pfc1, sdr0_srst; /* * FLASH stuff... @@ -158,32 +215,7 @@ int misc_init_r(void) gd->bd->bi_flashoffset = 0; mfebc(PB0CR, pbcr); - switch (gd->bd->bi_flashsize) { - case 1 << 20: - size_val = 0; - break; - case 2 << 20: - size_val = 1; - break; - case 4 << 20: - size_val = 2; - break; - case 8 << 20: - size_val = 3; - break; - case 16 << 20: - size_val = 4; - break; - case 32 << 20: - size_val = 5; - break; - case 64 << 20: - size_val = 6; - break; - case 128 << 20: - size_val = 7; - break; - } + size_val = ffs(gd->bd->bi_flashsize) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); mtebc(PB0CR, pbcr); @@ -193,53 +225,92 @@ int misc_init_r(void) flash_get_size(gd->bd->bi_flashstart, 0); /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - -CONFIG_SYS_MONITOR_LEN, - 0xffffffff, - &flash_info[1]); + flash_protect(FLAG_PROTECT_SET, -CONFIG_SYS_MONITOR_LEN, 0xffffffff, + &flash_info[cfi_flash_num_flash_banks - 1]); /* Env protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1, - &flash_info[1]); + flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, + CONFIG_ENV_ADDR_REDUND + 2 * CONFIG_ENV_SECT_SIZE - 1, + &flash_info[cfi_flash_num_flash_banks - 1]); /* * USB suff... */ + + /* Reset USB */ + /* Reset of USB2PHY0 must be active at least 10 us */ + mtsdr(SDR0_SRST0, SDR0_SRST0_USB2H | SDR0_SRST0_USB2D); + udelay(2000); + + mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY | SDR0_SRST1_USB2HUTMI | + SDR0_SRST1_USB2HPHY | SDR0_SRST1_OPBA2 | + SDR0_SRST1_PLB42OPB1 | SDR0_SRST1_OPB2PLB40); + udelay(2000); + + /* Errata CHIP_6 */ + + /* 1. Set internal PHY configuration */ /* SDR Setting */ mfsdr(SDR0_PFC1, sdr0_pfc1); mfsdr(SDR0_USB0, usb2d0cr); mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); mfsdr(SDR0_USB2H0CR, usb2h0cr); - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/ - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/ - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ - - /* An 8-bit/60MHz interface is the only possible alternative - when connecting the Device to the PHY */ - usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; - usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ + usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK; + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ + + /* + * An 8-bit/60MHz interface is the only possible alternative + * when connecting the Device to the PHY + */ + usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK; + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/ mtsdr(SDR0_PFC1, sdr0_pfc1); mtsdr(SDR0_USB0, usb2d0cr); mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); mtsdr(SDR0_USB2H0CR, usb2h0cr); + /* 2. De-assert internal PHY reset */ + mfsdr(SDR0_SRST1, sdr0_srst); + sdr0_srst = sdr0_srst & ~SDR0_SRST1_USB20PHY; + mtsdr(SDR0_SRST1, sdr0_srst); + + /* 3. Wait for more than 1 ms */ + udelay(2000); + + /* 4. De-assert USB 2.0 Host main reset */ + mfsdr(SDR0_SRST0, sdr0_srst); + sdr0_srst = sdr0_srst &~ SDR0_SRST0_USB2H; + mtsdr(SDR0_SRST0, sdr0_srst); + udelay(1000); + + /* 5. De-assert reset of OPB2 cores */ + mfsdr(SDR0_SRST1, sdr0_srst); + sdr0_srst = sdr0_srst &~ SDR0_SRST1_PLB42OPB1; + sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPB2PLB40; + sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPBA2; + mtsdr(SDR0_SRST1, sdr0_srst); + udelay(1000); + + /* 6. Set EHCI Configure FLAG */ + + /* 7. Reassert internal PHY reset: */ + mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY); + udelay(1000); + /* * Clear resets */ - udelay (1000); mtsdr(SDR0_SRST1, 0x00000000); - udelay (1000); mtsdr(SDR0_SRST0, 0x00000000); printf("USB: Host(int phy) Device(ext phy)\n"); @@ -264,7 +335,7 @@ int checkboard(void) { char *s = getenv("serial#"); - printf("Board: lwmon5"); + puts("Board: lwmon5"); if (s != NULL) { puts(", serial# "); @@ -331,34 +402,33 @@ U_BOOT_CMD( extern GraphicDevice mb862xx; -static const gdc_regs init_regs [] = -{ - {0x0100, 0x00000f00}, - {0x0020, 0x801401df}, - {0x0024, 0x00000000}, - {0x0028, 0x00000000}, - {0x002c, 0x00000000}, - {0x0110, 0x00000000}, - {0x0114, 0x00000000}, - {0x0118, 0x01df0280}, - {0x0004, 0x031f0000}, - {0x0008, 0x027f027f}, - {0x000c, 0x015f028f}, - {0x0010, 0x020c0000}, - {0x0014, 0x01df01ea}, - {0x0018, 0x00000000}, - {0x001c, 0x01e00280}, - {0x0100, 0x80010f00}, - {0x0, 0x0} +static const gdc_regs init_regs [] = { + { 0x0100, 0x00000f00 }, + { 0x0020, 0x801401df }, + { 0x0024, 0x00000000 }, + { 0x0028, 0x00000000 }, + { 0x002c, 0x00000000 }, + { 0x0110, 0x00000000 }, + { 0x0114, 0x00000000 }, + { 0x0118, 0x01df0280 }, + { 0x0004, 0x031f0000 }, + { 0x0008, 0x027f027f }, + { 0x000c, 0x015f028f }, + { 0x0010, 0x020c0000 }, + { 0x0014, 0x01df01ea }, + { 0x0018, 0x00000000 }, + { 0x001c, 0x01e00280 }, + { 0x0100, 0x80010f00 }, + { 0x0, 0x0 } }; -const gdc_regs *board_get_regs (void) +const gdc_regs *board_get_regs(void) { return init_regs; } /* Returns Lime base address */ -unsigned int board_video_init (void) +unsigned int board_video_init(void) { /* * Reset Lime controller @@ -375,7 +445,7 @@ unsigned int board_video_init (void) return CONFIG_SYS_LIME_BASE_0; } -#define DEFAULT_BRIGHTNESS 0x64 +#define DEFAULT_BRIGHTNESS 0x64 static void board_backlight_brightness(int brightness) { @@ -390,7 +460,7 @@ static void board_backlight_brightness(int brightness) } } -void board_backlight_switch (int flag) +void board_backlight_switch(int flag) { char * param; int rc; @@ -410,15 +480,14 @@ void board_backlight_switch (int flag) /* * Return text to be printed besides the logo. */ -void video_get_info_str (int line_number, char *info) +void video_get_info_str(int line_number, char *info) { - if (line_number == 1) { - strcpy (info, " Board: Lwmon5 (Liebherr Elektronik GmbH)"); - } else { + if (line_number == 1) + strcpy(info, " Board: Lwmon5 (Liebherr Elektronik GmbH)"); + else info [0] = '\0'; - } } -#endif +#endif /* CONFIG_CONSOLE_EXTRA_INFO */ #endif /* CONFIG_VIDEO */ void board_reset(void) -- cgit v1.2.1