From e7e9090108f1ccd0c3cae17d189eeac690946a6e Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Sat, 25 Jan 2014 07:53:46 +0100 Subject: powerpc, ids8247: create vendor board dir ids create vendor board directory ids and move ids8247 board to it. Signed-off-by: Heiko Schocher Cc: Wolfgang Denk Signed-off-by: Kim Phillips --- board/ids/ids8247/Makefile | 11 ++ board/ids/ids8247/ids8247.c | 390 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 401 insertions(+) create mode 100644 board/ids/ids8247/Makefile create mode 100644 board/ids/ids8247/ids8247.c (limited to 'board/ids') diff --git a/board/ids/ids8247/Makefile b/board/ids/ids8247/Makefile new file mode 100644 index 0000000000..99c47b6697 --- /dev/null +++ b/board/ids/ids8247/Makefile @@ -0,0 +1,11 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2005 +# Heiko Schocher, DENX Software Engineering, +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y = ids8247.o diff --git a/board/ids/ids8247/ids8247.c b/board/ids/ids8247/ids8247.c new file mode 100644 index 0000000000..1b2d0e09a9 --- /dev/null +++ b/board/ids/ids8247/ids8247.c @@ -0,0 +1,390 @@ +/* + * (C) Copyright 2005 + * Heiko Schocher, DENX Software Engineering, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#if defined(CONFIG_OF_LIBFDT) +#include +#include +#include +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * I/O Port configuration table + * + * if conf is 1, then that port pin will be configured at boot time + * according to the five values podr/pdir/ppar/psor/pdat for that entry + */ + +const iop_conf_t iop_conf_tab[4][32] = { + + /* Port A configuration */ + { /* conf ppar psor pdir podr pdat */ + /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 COL */ + /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 CRS */ + /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */ + /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */ + /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */ + /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */ + /* PA25 */ { 0, 0, 0, 0, 1, 0 }, /* 8247_P0 */ +#if defined(CONFIG_SYS_I2C_SOFT) + /* PA24 */ { 1, 0, 0, 0, 1, 1 }, /* I2C_SDA2 */ + /* PA23 */ { 1, 0, 0, 1, 1, 1 }, /* I2C_SCL2 */ +#else /* normal I/O port pins */ + /* PA24 */ { 0, 0, 0, 1, 0, 0 }, /* PA24 */ + /* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* PA23 */ +#endif + /* PA22 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DCD */ + /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */ + /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */ + /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */ + /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */ + /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */ + /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */ + /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */ + /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */ + /* PA13 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_RTS */ + /* PA12 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_CTS */ + /* PA11 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_DTR */ + /* PA10 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DSR */ + /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ + /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RXD */ + /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ + /* PA6 */ { 0, 0, 0, 1, 0, 0 }, /* PA6 */ + /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ + /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ + /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ + /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ + /* PA1 */ { 0, 0, 0, 1, 0, 0 }, /* PA1 */ + /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ + }, + + /* Port B configuration */ + { /* conf ppar psor pdir podr pdat */ + /* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ + /* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ + /* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ + /* PB28 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ + /* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ + /* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ + /* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ + /* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ + /* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ + /* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ + /* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ + /* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ + /* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ + /* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ + /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */ + /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */ + /* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */ + /* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */ + /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */ + /* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */ + /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */ + /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */ + /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */ + /* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */ + /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */ + /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */ + /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */ + /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */ + /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + }, + + /* Port C */ + { /* conf ppar psor pdir podr pdat */ + /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ + /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ + /* PC29 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CLSN */ + /* PC28 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_OUT */ + /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* PC27 */ + /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ + /* PC25 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_IN */ + /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ + /* PC23 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */ + /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */ + /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ + /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ + /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */ + /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */ + /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ + /* PC16 */ { 0, 0, 0, 1, 0, 0 }, /* PC16 */ + /* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */ + /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ + /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ + /* PC12 */ { 0, 0, 0, 1, 0, 0 }, /* PC12 */ + /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* PC11 */ + /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDC */ + /* PC9 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */ + /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ + /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ + /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ + /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ + /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ + /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ + /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ + /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ + /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ + }, + + /* Port D */ + { /* conf ppar psor pdir podr pdat */ + /* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ + /* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ + /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */ + /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* PD28 */ + /* PD27 */ { 0, 0, 0, 1, 0, 0 }, /* PD27 */ + /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */ + /* PD25 */ { 0, 1, 0, 0, 0, 0 }, /* SCC3_RX */ + /* PD24 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_TX */ + /* PD23 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_RTS */ + /* PD22 */ { 0, 1, 0, 0, 0, 0 }, /* SCC4_RXD */ + /* PD21 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_TXD */ + /* PD20 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_RTS */ + /* PD19 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_SEL */ + /* PD18 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_CLK */ + /* PD17 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MOSI */ + /* PD16 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MISO */ +#if defined(CONFIG_HARD_I2C) + /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA1 */ + /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL1 */ +#else /* normal I/O port pins */ + /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* PD15 */ + /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* PD14 */ +#endif + /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ + /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ + /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ + /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ + /* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */ + /* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */ + /* PD7 */ { 1, 0, 0, 1, 0, 1 }, /* MII_MDIO */ + /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ + /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ + /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ + /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ + /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ + } +}; + +/* ------------------------------------------------------------------------- */ + +/* Check Board Identity: + */ +int checkboard (void) +{ + puts ("Board: IDS 8247\n"); + return 0; +} + +/* ------------------------------------------------------------------------- */ + +/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx + * + * This routine performs standard 8260 initialization sequence + * and calculates the available memory size. It may be called + * several times to try different SDRAM configurations on both + * 60x and local buses. + */ +static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, + ulong orx, volatile uchar * base) +{ + volatile uchar c = 0xff; + volatile uint *sdmr_ptr; + volatile uint *orx_ptr; + ulong maxsize, size; + int i; + + /* We must be able to test a location outsize the maximum legal size + * to find out THAT we are outside; but this address still has to be + * mapped by the controller. That means, that the initial mapping has + * to be (at least) twice as large as the maximum expected size. + */ + maxsize = (1 + (~orx | 0x7fff))/* / 2*/; + + sdmr_ptr = &memctl->memc_psdmr; + orx_ptr = &memctl->memc_or2; + + *orx_ptr = orx; + + /* + * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): + * + * "At system reset, initialization software must set up the + * programmable parameters in the memory controller banks registers + * (ORx, BRx, P/LSDMR). After all memory parameters are configured, + * system software should execute the following initialization sequence + * for each SDRAM device. + * + * 1. Issue a PRECHARGE-ALL-BANKS command + * 2. Issue eight CBR REFRESH commands + * 3. Issue a MODE-SET command to initialize the mode register + * + * The initial commands are executed by setting P/LSDMR[OP] and + * accessing the SDRAM with a single-byte transaction." + * + * The appropriate BRx/ORx registers have already been set when we + * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. + */ + + *sdmr_ptr = sdmr | PSDMR_OP_PREA; + *base = c; + + *sdmr_ptr = sdmr | PSDMR_OP_CBRR; + for (i = 0; i < 8; i++) + *base = c; + + *sdmr_ptr = sdmr | PSDMR_OP_MRW; + *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ + + *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; + *base = c; + + size = get_ram_size((long *)base, maxsize); + *orx_ptr = orx | ~(size - 1); + + return (size); +} + +phys_size_t initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; + volatile memctl8260_t *memctl = &immap->im_memctl; + + long psize; + + psize = 16 * 1024 * 1024; + + memctl->memc_psrt = CONFIG_SYS_PSRT; + memctl->memc_mptpr = CONFIG_SYS_MPTPR; + +#ifndef CONFIG_SYS_RAMBOOT + /* 60x SDRAM setup: + */ + psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR2, + (uchar *) CONFIG_SYS_SDRAM_BASE); +#endif /* CONFIG_SYS_RAMBOOT */ + + icache_enable (); + + return (psize); +} + +int misc_init_r (void) +{ + gd->bd->bi_flashstart = 0xff800000; + return 0; +} + +#if defined(CONFIG_CMD_NAND) +#include +#include +#include + +static u8 hwctl; + +static void ids_nand_hwctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + if ( ctrl & NAND_CLE ) { + hwctl |= 0x1; + writeb(0x00, (this->IO_ADDR_W + 0x0a)); + } else { + hwctl &= ~0x1; + writeb(0x00, (this->IO_ADDR_W + 0x08)); + } + if ( ctrl & NAND_ALE ) { + hwctl |= 0x2; + writeb(0x00, (this->IO_ADDR_W + 0x09)); + } else { + hwctl &= ~0x2; + writeb(0x00, (this->IO_ADDR_W + 0x08)); + } + if ( (ctrl & NAND_NCE) != NAND_NCE) + writeb(0x00, (this->IO_ADDR_W + 0x0c)); + else + writeb(0x00, (this->IO_ADDR_W + 0x08)); + } + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); + +} + +static u_char ids_nand_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + + return readb(this->IO_ADDR_R); +} + +static void ids_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +{ + struct nand_chip *nand = mtd->priv; + int i; + + for (i = 0; i < len; i++) { + if (hwctl & 0x1) + writeb(buf[i], (nand->IO_ADDR_W + 0x02)); + else if (hwctl & 0x2) + writeb(buf[i], (nand->IO_ADDR_W + 0x01)); + else + writeb(buf[i], nand->IO_ADDR_W); + } +} + +static void ids_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + struct nand_chip *this = mtd->priv; + int i; + + for (i = 0; i < len; i++) { + buf[i] = readb(this->IO_ADDR_R); + } +} + +static int ids_nand_dev_ready(struct mtd_info *mtd) +{ + /* constant delay (see also tR in the datasheet) */ + udelay(12); + return 1; +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->ecc.mode = NAND_ECC_SOFT; + + /* Reference hardware control function */ + nand->cmd_ctrl = ids_nand_hwctrl; + nand->read_byte = ids_nand_read_byte; + nand->write_buf = ids_nand_write_buf; + nand->read_buf = ids_nand_read_buf; + nand->dev_ready = ids_nand_dev_ready; + nand->chip_delay = 12; + + return 0; +} + +#endif /* CONFIG_CMD_NAND */ + +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup( blob, bd); +} +#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ -- cgit v1.2.1