From ee5931d488122f1d4510bf03d37183fabd35fc0d Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Wed, 8 Apr 2015 12:54:59 -0700 Subject: imx: ventana: add 'gsc wd' command for enabling and disabling GSC watchdog This adds information about the Gateworks System Controller to the gsc command such as the firmware version, firmware CRC and status of the GSC watchdog (if its enabled and if its tripped). Additionally the 'gsc wd' command can be used to enable or disable the watchdog with the following usage: gsc wd enable [30|60] gsc wd disable Note that the GSC registers are battery-backed by the GSC coincell so once eanbled, they remain enabled across power-cycles or until either the GSC firmware has been updated or FLASH has been re-programmed by the Gateworks JTAG adapter. Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gsc.c | 80 ++++++++++++++++++++++++++++++--- board/gateworks/gw_ventana/gsc.h | 6 ++- board/gateworks/gw_ventana/gw_ventana.c | 18 +------- 3 files changed, 81 insertions(+), 23 deletions(-) (limited to 'board/gateworks') diff --git a/board/gateworks/gw_ventana/gsc.c b/board/gateworks/gw_ventana/gsc.c index a62f128b7f..718e1651d0 100644 --- a/board/gateworks/gw_ventana/gsc.c +++ b/board/gateworks/gw_ventana/gsc.c @@ -59,7 +59,6 @@ int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) return ret; } -#ifdef CONFIG_CMD_GSC static void read_hwmon(const char *name, uint reg, uint size) { unsigned char buf[3]; @@ -78,11 +77,29 @@ static void read_hwmon(const char *name, uint reg, uint size) } } -int do_gsc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int gsc_info(int verbose) { const char *model = getenv("model"); + unsigned char buf[16]; i2c_set_bus_num(0); + if (gsc_i2c_read(GSC_SC_ADDR, 0, 1, buf, 16)) + return CMD_RET_FAILURE; + + printf("GSC: v%d", buf[GSC_SC_FWVER]); + printf(" 0x%04x", buf[GSC_SC_FWCRC] | buf[GSC_SC_FWCRC+1]<<8); + printf(" WDT:%sabled", (buf[GSC_SC_CTRL1] & (1< 2) + timeout = simple_strtoul(argv[2], NULL, 10); + i2c_set_bus_num(0); + if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) + return CMD_RET_FAILURE; + reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME)); + if (timeout == 60) + reg |= (1 << GSC_SC_CTRL1_WDTIME); + else + timeout = 30; + reg |= (1 << GSC_SC_CTRL1_WDEN); + if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) + return CMD_RET_FAILURE; + printf("GSC Watchdog enabled with timeout=%d seconds\n", + timeout); + } else if (strcasecmp(argv[1], "disable") == 0) { + i2c_set_bus_num(0); + if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) + return CMD_RET_FAILURE; + reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME)); + if (gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) + return CMD_RET_FAILURE; + printf("GSC Watchdog disabled\n"); + } else { + return CMD_RET_USAGE; + } + return CMD_RET_SUCCESS; +} + +static int do_gsc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if (argc < 2) + return gsc_info(1); + + if (strcasecmp(argv[1], "wd") == 0) + return do_gsc_wd(cmdtp, flag, --argc, ++argv); + + return CMD_RET_USAGE; +} + +U_BOOT_CMD( + gsc, 4, 1, do_gsc, "GSC configuration", + "[wd enable [30|60]]|[wd disable]\n" + ); #endif /* CONFIG_CMD_GSC */ diff --git a/board/gateworks/gw_ventana/gsc.h b/board/gateworks/gw_ventana/gsc.h index 0a70774cd9..2d4969ecdd 100644 --- a/board/gateworks/gw_ventana/gsc.h +++ b/board/gateworks/gw_ventana/gsc.h @@ -19,12 +19,15 @@ enum { GSC_SC_CTRL0 = 0x00, GSC_SC_CTRL1 = 0x01, GSC_SC_STATUS = 0x0a, + GSC_SC_FWCRC = 0x0c, GSC_SC_FWVER = 0x0e, }; /* System Controller Control1 bits */ enum { - GSC_SC_CTRL1_WDDIS = 7, /* 1 = disable watchdog */ + GSC_SC_CTRL1_WDTIME = 4, /* 1 = 60s timeout, 0 = 30s timeout */ + GSC_SC_CTRL1_WDEN = 5, /* 1 = enable, 0 = disable */ + GSC_SC_CTRL1_WDDIS = 7, /* 1 = disable boot watchdog */ }; /* System Controller Interrupt bits */ @@ -62,5 +65,6 @@ enum { */ int gsc_i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len); int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len); +int gsc_info(int verbose); #endif diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 871af09d41..b7199f1b42 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1430,15 +1430,8 @@ int checkboard(void) return 0; /* Display GSC firmware revision/CRC/status */ - i2c_set_bus_num(CONFIG_I2C_GSC); - if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_FWVER, 1, buf, 1)) { - printf("GSC: v%d", buf[0]); - if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_STATUS, 1, buf, 4)) { - printf(" 0x%04x", buf[2] | buf[3]<<8); /* CRC */ - printf(" 0x%02x", buf[0]); /* irq status */ - } - puts("\n"); - } + gsc_info(0); + /* Display RTC */ if (!gsc_i2c_read(GSC_RTC_ADDR, 0x00, 1, buf, 4)) { printf("RTC: %d\n", @@ -1575,13 +1568,6 @@ int misc_init_r(void) } else { puts("Error: could not disable GSC Watchdog\n"); } - if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_STATUS, 1, ®, 1)) { - if (reg & (1 << GSC_SC_IRQ_WATCHDOG)) { /* watchdog timeout */ - puts("GSC boot watchdog timeout detected\n"); - reg &= ~(1 << GSC_SC_IRQ_WATCHDOG); /* clear flag */ - gsc_i2c_write(GSC_SC_ADDR, GSC_SC_STATUS, 1, ®, 1); - } - } return 0; } -- cgit v1.2.1