From 6aa3d3bfaa986f1aff5e21a9b9f68d087715b1a9 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Tue, 14 Sep 2010 19:13:50 -0500 Subject: 83xx: Remove warmboot parameter from PCI init functions This change lays the groundwork for the BOOTFLAG_* flags being removed. This change has the small affect of delaying 100ms on PCI initialization after a warm boot as opposed to the optimal 1ms on some boards. Signed-off-by: Peter Tyser included the mpc8308_p1m board. Signed-off-by: Kim Phillips --- board/freescale/mpc8315erdb/mpc8315erdb.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'board/freescale/mpc8315erdb/mpc8315erdb.c') diff --git a/board/freescale/mpc8315erdb/mpc8315erdb.c b/board/freescale/mpc8315erdb/mpc8315erdb.c index d5e71dc522..5dc558a4f8 100644 --- a/board/freescale/mpc8315erdb/mpc8315erdb.c +++ b/board/freescale/mpc8315erdb/mpc8315erdb.c @@ -140,7 +140,6 @@ void pci_init_board(void) volatile law83xx_t *pcie_law = sysconf->pcielaw; struct pci_region *reg[] = { pci_regions }; struct pci_region *pcie_reg[] = { pcie_regions_0, pcie_regions_1, }; - int warmboot; /* Enable all 3 PCI_CLK_OUTPUTs. */ clk->occr |= 0xe0000000; @@ -154,10 +153,7 @@ void pci_init_board(void) pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR; pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; - warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; - warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; - - mpc83xx_pci_init(1, reg, warmboot); + mpc83xx_pci_init(1, reg); /* Configure the clock for PCIE controller */ clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM | SCCR_PCIEXP2CM, @@ -175,7 +171,7 @@ void pci_init_board(void) out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR); out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB); - mpc83xx_pcie_init(2, pcie_reg, warmboot); + mpc83xx_pcie_init(2, pcie_reg); } #if defined(CONFIG_OF_BOARD_SETUP) -- cgit v1.2.1