From a187559e3d586891c917279044c5386d1b2adc6e Mon Sep 17 00:00:00 2001 From: Bin Meng Date: Fri, 5 Feb 2016 19:30:11 -0800 Subject: Use correct spelling of "U-Boot" Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng Reviewed-by: Heiko Schocher Reviewed-by: Simon Glass Reviewed-by: Minkyu Kang --- board/freescale/m52277evb/README | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'board/freescale/m52277evb/README') diff --git a/board/freescale/m52277evb/README b/board/freescale/m52277evb/README index 3178d49d0a..92a83849ac 100644 --- a/board/freescale/m52277evb/README +++ b/board/freescale/m52277evb/README @@ -49,7 +49,7 @@ Changed files: - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure +- include/asm-m68k/u-boot.h U-Boot structure - include/configs/M52277EVB.h Board specific configuration file @@ -77,7 +77,7 @@ CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message -CONFIG_CMD_DATE -- enable to use date feature in u-boot +CONFIG_CMD_DATE -- enable to use date feature in U-Boot CONFIG_MCFTMR -- define to use DMA timer CONFIG_MCFPIT -- define to use PIT timer @@ -102,7 +102,7 @@ CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base -CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot, +CONFIG_LCD and CONFIG_CMD_USB are not supported in this current U-Boot, update will be provided at later time 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL @@ -113,7 +113,7 @@ update will be provided at later time SRAM: 0x80000000-0x8FFFFFFF (256MB) IP: 0xF0000000-0xFFFFFFFF (256MB) -2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and +2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and linux kernel, you can customize it based on your system requirements: Flash0: 0x00000000-0x00FFFFFF (16MB) -- cgit v1.2.1