From 9c25ee6d3a63d450a89ed5bb35002210a91699a2 Mon Sep 17 00:00:00 2001 From: Po Liu Date: Thu, 26 Sep 2013 09:40:11 +0800 Subject: powerpc/c29xpcie: add DDR ECC on off config setting c29xpcie REV_A board DDR ECC chip has bad impedance in hardware, force that kind of board to be DDR ECC off when booting. Other version board config ECC on/off by hwconfig=fsl_ddr:ecc=on in uboot enviroment. Signed-off-by: Po Liu Acked-by: York Sun --- board/freescale/c29xpcie/ddr.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'board/freescale/c29xpcie') diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c index 804ea1916d..57a9b610ea 100644 --- a/board/freescale/c29xpcie/ddr.c +++ b/board/freescale/c29xpcie/ddr.c @@ -9,6 +9,9 @@ #include #include +#include "cpld.h" + +#define C29XPCIE_HARDWARE_REVA 0x40 /* * Micron MT41J128M16HA-15E * */ @@ -61,7 +64,9 @@ void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) { + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); int i; + popts->clk_adjust = 4; popts->cpo_override = 0x1f; popts->write_data_delay = 4; @@ -79,6 +84,9 @@ void fsl_ddr_board_options(memctl_options_t *popts, popts->trwt_override = 1; popts->trwt = 0; + if (in_8(&cpld_data->hwver) == C29XPCIE_HARDWARE_REVA) + popts->ecc_mode = 0; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER; popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS; -- cgit v1.2.1