From 049216f045fd8e0f45bcef121c2bb1c7d3de6988 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Fri, 20 Feb 2009 10:19:18 +0100 Subject: ppc4xx: Use correct io accessors for esd 405 boards This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32 macros. Also volatile pointer references are replaced by the new accessors. Signed-off-by: Matthias Fuchs Signed-off-by: Stefan Roese --- board/esd/wuh405/wuh405.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) (limited to 'board/esd/wuh405/wuh405.c') diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index 5eca3bd380..e330fff16c 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -82,10 +82,6 @@ int board_early_init_f (void) int misc_init_r (void) { - volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4); - volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4); - volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4); - volatile unsigned char *duart3_mcr = (unsigned char *)((ulong)DUART3_BA + 4); unsigned char *dst; ulong len = sizeof(fpgadata); int status; @@ -155,18 +151,20 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) | CONFIG_SYS_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, + in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); udelay(1000); /* wait 1ms */ /* * Enable interrupts in exar duart mcr[3] */ - *duart0_mcr = 0x08; - *duart1_mcr = 0x08; - *duart2_mcr = 0x08; - *duart3_mcr = 0x08; + out_8((void *)(DUART0_BA + 4), 0x08); + out_8((void *)(DUART1_BA + 4), 0x08); + out_8((void *)(DUART2_BA + 4), 0x08); + out_8((void *)(DUART3_BA + 4), 0x08); return (0); } -- cgit v1.2.1