From 8bde7f776c77b343aca29b8c7b58464d915ac245 Mon Sep 17 00:00:00 2001 From: wdenk Date: Fri, 27 Jun 2003 21:31:46 +0000 Subject: * Code cleanup: - remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen) --- board/eltec/bab7xx/Makefile | 11 +- board/eltec/bab7xx/asm_init.S | 62 ++--- board/eltec/bab7xx/bab7xx.c | 44 ++-- board/eltec/bab7xx/dc_srom.c | 42 ++-- board/eltec/bab7xx/el_srom.c | 146 +++++------ board/eltec/bab7xx/flash.c | 367 ++++++++++++++------------- board/eltec/bab7xx/l2cache.c | 191 +++++++------- board/eltec/bab7xx/misc.c | 510 +++++++++++++++++++------------------- board/eltec/bab7xx/pci.c | 62 ++--- board/eltec/bab7xx/srom.h | 10 +- board/eltec/bab7xx/u-boot.lds | 5 + board/eltec/elppc/Makefile | 11 +- board/eltec/elppc/eepro100_srom.c | 28 +-- board/eltec/elppc/elppc.c | 157 ++++++------ board/eltec/elppc/flash.c | 367 ++++++++++++++------------- board/eltec/elppc/misc.c | 270 ++++++++++---------- board/eltec/elppc/mpc107_i2c.c | 158 ++++++------ board/eltec/elppc/pci.c | 44 ++-- board/eltec/elppc/srom.h | 10 +- board/eltec/elppc/u-boot.lds | 5 + board/eltec/mhpc/Makefile | 2 +- board/eltec/mhpc/config.mk | 16 -- board/eltec/mhpc/flash.c | 34 +-- board/eltec/mhpc/mhpc.c | 216 ++++++++-------- board/eltec/mhpc/u-boot.lds | 6 +- board/eltec/mhpc/u-boot.lds.debug | 6 +- 26 files changed, 1356 insertions(+), 1424 deletions(-) (limited to 'board/eltec') diff --git a/board/eltec/bab7xx/Makefile b/board/eltec/bab7xx/Makefile index 6e412c2e0d..7d8ed26b52 100644 --- a/board/eltec/bab7xx/Makefile +++ b/board/eltec/bab7xx/Makefile @@ -30,7 +30,7 @@ OBJS = $(BOARD).o flash.o pci.o misc.o el_srom.o dc_srom.o l2cache.o SOBJS = asm_init.o $(LIB): .depend $(OBJS) $(SOBJS) - $(AR) crv $@ $^ + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -46,12 +46,3 @@ distclean: clean sinclude .depend ######################################################################### - - - - - - - - - diff --git a/board/eltec/bab7xx/asm_init.S b/board/eltec/bab7xx/asm_init.S index 934fabe981..3f88bc2b4b 100644 --- a/board/eltec/bab7xx/asm_init.S +++ b/board/eltec/bab7xx/asm_init.S @@ -204,7 +204,7 @@ configSDRAM: beq SD16MB2B li r3, 0x0011 /* get number of internal banks */ - /* from spd for bank0/1 */ + /* from spd for bank0/1 */ bl spdRead cmpli 0, 0, r3, 0x02 @@ -244,7 +244,7 @@ SDRow2nd: * set the Memory Configuration Reg. 2 */ li r3, 0x0111 /* get number of internal banks */ - /* from spd for bank2/3 */ + /* from spd for bank2/3 */ bl spdRead cmpli 0, 0, r3, 0x02 @@ -269,13 +269,13 @@ S2D16MB2B: */ S2D64MB4B: lis r21, 0x8630 /* BSTOPRE = 0x80, REFREC = 6, */ - /* RDLAT = 3 */ + /* RDLAT = 3 */ /* * set the Memory Configuration Reg. 4 */ lis r22, 0x2430 /* PRETOACT = 2, ACTOPRE = 4, */ - /* WCBUF = 1, RCBUF = 1 */ + /* WCBUF = 1, RCBUF = 1 */ ori r22, r22, 0x2220 /* SDMODE = 0x022, ACTORW = 2 */ /* @@ -285,10 +285,10 @@ S2D64MB4B: bl spdRead rlwinm r16, r3, 2, 24, 29 /* calculate size in MByte */ - /* (128 MB max.) */ + /* (128 MB max.) */ li r3, 0x0005 /* get number of banks from spd */ - /* for bank0/1 */ + /* for bank0/1 */ bl spdRead cmpi 0, 0, r3, 2 /* 2 banks ? */ @@ -336,10 +336,10 @@ configSDRAM23: bl spdRead rlwinm r18, r3, 2, 24, 29 /* calculate size in MByte */ - /* (128 MB max.) */ + /* (128 MB max.) */ li r3, 0x0105 /* get number of banks from */ - /* spd bank0/1 */ + /* spd bank0/1 */ bl spdRead cmpi 0, 0, r3, 2 /* 2 banks ? */ @@ -365,7 +365,7 @@ configEDO0: getSpdRowBank01: li r3, 0x0003 /* get number of row bits from */ - /* spd from bank0/1 */ + /* spd from bank0/1 */ bl spdRead ori r20, r20, (MCCR1_BK0_9BITS | MCCR1_BK1_9BITS) cmpli 0, 0, r3, 0x0009 /* bank0 - 9 row bits */ @@ -392,7 +392,7 @@ getSpdRowBank01: getSpdRowBank23: li r3, 0x0103 /* get number of row bits from */ - /* spd for bank2/3 */ + /* spd for bank2/3 */ bl spdRead ori r20, r20, (MCCR1_BK2_9BITS | MCCR1_BK3_9BITS) @@ -415,13 +415,13 @@ getSpdRowBank23: writeRowBits: lis r21, 0x000a /* CPX = 1, RAS6P = 4 */ ori r21, r21, 0x2293 /* CAS5 = 2, CP4 = 1, */ - /* CAS3 = 2, RCD2 = 2, RP = 3 */ + /* CAS3 = 2, RCD2 = 2, RP = 3 */ /* * set the Memory Configuration Reg. 4 */ lis r22, 0x0010 /* all SDRAM parameter 0, */ - /* WCBUF flow through, */ - /* RCBUF registered */ + /* WCBUF flow through, */ + /* RCBUF registered */ /* * get the size of bank 0-3 */ @@ -429,7 +429,7 @@ writeRowBits: bl spdRead li r16, 0 /* bank size is: */ - /* (8*2^row*2^column)/0x100000 MB */ + /* (8*2^row*2^column)/0x100000 MB */ ori r16, r16, 0x8000 rlwnm r16, r16, r3, 0, 31 @@ -439,7 +439,7 @@ writeRowBits: rlwnm r16, r16, r3, 0, 31 li r3, 0x0005 /* get number of banks from */ - /* spd for bank0/1 */ + /* spd for bank0/1 */ bl spdRead cmpi 0, 0, r3, 2 /* 2 banks ? */ @@ -487,7 +487,7 @@ EDObank2: bl spdRead li r18, 0 /* bank size is: */ - /* (8*2^row*2^column)/0x100000 MB */ + /* (8*2^row*2^column)/0x100000 MB */ ori r18, r18, 0x8000 rlwnm r18, r18, r3, 0, 31 @@ -497,7 +497,7 @@ EDObank2: rlwnm r18, r18, r3, 0, 31 li r3, 0x0105 /* get number of banks from */ - /* spd for bank2/3 */ + /* spd for bank2/3 */ bl spdRead cmpi 0, 0, r3, 2 /* 2 banks ? */ @@ -701,28 +701,28 @@ common2: common3: li r4, 0x1010 /* refesh cycle 1028 clocks */ - /* left shifted 2 */ + /* left shifted 2 */ cmpli 0, 0, r3, 0x0000 /* 15.6 us ? */ beq writeRefresh li r4, 0x0808 /* refesh cycle 514 clocks */ - /* left shifted 2 */ + /* left shifted 2 */ cmpli 0, 0, r3, 0x0002 /* 7.8 us ? */ beq writeRefresh li r4, 0x2020 /* refesh cycle 2056 clocks */ - /* left shifted 2 */ + /* left shifted 2 */ cmpli 0, 0, r3, 0x0003 /* 31.3 us ? */ beq writeRefresh li r4, 0x4040 /* refesh cycle 4112 clocks */ - /* left shifted 2 */ + /* left shifted 2 */ cmpli 0, 0, r3, 0x0004 /* 62.5 us ? */ beq writeRefresh li r4, 0 ori r4, r4, 0x8080 /* refesh cycle 8224 clocks */ - /* left shifted 2 */ + /* left shifted 2 */ cmpli 0, 0, r3, 0x0005 /* 125 us ? */ beq writeRefresh @@ -916,7 +916,7 @@ toggleError2: eieio li r9, 0x03 stb r9, 3(r8) /* 8 data bits, 1 stop bit, */ - /* no parity */ + /* no parity */ eieio li r9, 0x0b stb r9, 4(r8) /* enable the receiver and transmitter */ @@ -928,7 +928,7 @@ waitEmpty: beq waitEmpty li r9, 0x47 stb r9, 3(r8) /* send break, 8 data bits, */ - /* 2 stop bits, no parity */ + /* 2 stop bits, no parity */ eieio lis r0, 0x0001 @@ -944,7 +944,7 @@ waitEmpty1: beq waitEmpty1 li r9, 0x07 stb r9, 3(r8) /* 8 data bits, 2 stop bits, */ - /* no parity */ + /* no parity */ eieio /* @@ -1473,15 +1473,3 @@ Mactivate: Mmbyte: .ascii " MB .......... \000" .align 4 - - - - - - - - - - - - diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c index 6f6f977b09..b74b055879 100644 --- a/board/eltec/bab7xx/bab7xx.c +++ b/board/eltec/bab7xx/bab7xx.c @@ -45,7 +45,7 @@ ulong bab7xx_get_bus_freq (void) unsigned char data = gpio->dta1; if (data & 0x02) - return 66666666; + return 66666666; return 83333333; } @@ -58,7 +58,7 @@ ulong bab7xx_get_bus_freq (void) ulong bab7xx_get_gclk_freq (void) { static const int pllratio_to_factor[] = { - 00, 75, 70, 00, 20, 65, 100, 45, 30, 55, 40, 50, 80, 60, 35, 00, + 00, 75, 70, 00, 20, 65, 100, 45, 30, 55, 40, 50, 80, 60, 35, 00, }; return pllratio_to_factor[get_hid1 () >> 28] * (bab7xx_get_bus_freq() / 10); @@ -72,7 +72,7 @@ int checkcpu (void) printf ("MPC7xx V%d.%d",(pvr >> 8) & 0xFF, pvr & 0xFF); printf (" at %ld / %ld MHz\n", bab7xx_get_gclk_freq()/1000000, - bab7xx_get_bus_freq()/1000000); + bab7xx_get_bus_freq()/1000000); return (0); } @@ -131,8 +131,8 @@ long int dram_size (int board_type) for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4) { - if (*reg != reg) - return -1; + if (*reg != reg) + return -1; } #endif @@ -147,11 +147,11 @@ long int dram_size (int board_type) do { - if (i & 0x01) /* is bank enabled ? */ - memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1; - msar1 >>= 8; - mear1 >>= 8; - i >>= 1; + if (i & 0x01) /* is bank enabled ? */ + memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1; + msar1 >>= 8; + mear1 >>= 8; + i >>= 1; } while (i); return (memSize * 0x100000); @@ -222,20 +222,20 @@ void video_get_info_str (int line_number, char *info) switch (line_number) { case 1: - sprintf (info," MPC7xx V%d.%d at %ld / %ld MHz", - (get_pvr() >> 8) & 0xFF, - get_pvr() & 0xFF, - bab7xx_get_gclk_freq()/1000000, - bab7xx_get_bus_freq()/1000000); - return; + sprintf (info," MPC7xx V%d.%d at %ld / %ld MHz", + (get_pvr() >> 8) & 0xFF, + get_pvr() & 0xFF, + bab7xx_get_gclk_freq()/1000000, + bab7xx_get_bus_freq()/1000000); + return; case 2: - sprintf (info, " ELTEC BAB7xx with %ld MB DRAM and %ld MB FLASH", - dram_size(0)/0x100000, - flash_init()/0x100000); - return; + sprintf (info, " ELTEC BAB7xx with %ld MB DRAM and %ld MB FLASH", + dram_size(0)/0x100000, + flash_init()/0x100000); + return; case 3: - sprintf (info, " %s", smi.modeIdent); - return; + sprintf (info, " %s", smi.modeIdent); + return; } /* no more info lines */ diff --git a/board/eltec/bab7xx/dc_srom.c b/board/eltec/bab7xx/dc_srom.c index ef956e6e9b..a44af6e0d0 100644 --- a/board/eltec/bab7xx/dc_srom.c +++ b/board/eltec/bab7xx/dc_srom.c @@ -118,7 +118,7 @@ static void srom_address(u_int command, u_long addr, u_char offset) a = (char)(offset << 2); for (i=0; i<6; i++, a <<= 1) { - srom_latch(command | ((a < 0) ? DT_IN : 0), addr); + srom_latch(command | ((a < 0) ? DT_IN : 0), addr); } udelay(1); @@ -136,11 +136,11 @@ static short srom_data_rd (u_int command, u_long addr) for (i=0; i<16; i++) { - sendto_srom(command | DT_CLK, addr); - tmp = getfrom_srom(addr); - sendto_srom(command, addr); + sendto_srom(command | DT_CLK, addr); + tmp = getfrom_srom(addr); + sendto_srom(command, addr); - word = (word << 1) | ((tmp >> 3) & 0x01); + word = (word << 1) | ((tmp >> 3) & 0x01); } sendto_srom(command & 0x0000ff00, addr); @@ -160,13 +160,13 @@ static int srom_data_wr (u_int command, u_long addr, short val) for (i=0; i<16; i++) { - tmp = (longVal & 0x8000)>>13; + tmp = (longVal & 0x8000)>>13; - sendto_srom (tmp | command, addr); - sendto_srom (tmp | command | DT_CLK, addr); - sendto_srom (tmp | command, addr); + sendto_srom (tmp | command, addr); + sendto_srom (tmp | command | DT_CLK, addr); + sendto_srom (tmp | command, addr); - longVal = longVal<<1; + longVal = longVal<<1; } sendto_srom(command & 0x0000ff00, addr); @@ -175,15 +175,15 @@ static int srom_data_wr (u_int command, u_long addr, short val) tmp = 100; do { - if ((getfrom_srom(dc_srom_iobase) & 0x8) == 0x8) - break; - udelay(1000); + if ((getfrom_srom(dc_srom_iobase) & 0x8) == 0x8) + break; + udelay(1000); } while (--tmp); if (tmp == 0) { - printf("Write DEC21143 SRom timed out !\n"); - return (-1); + printf("Write DEC21143 SRom timed out !\n"); + return (-1); } return 0; @@ -218,7 +218,7 @@ static void srom_wr_enable (u_long addr) for (i=0; i<6; i++) { - srom_latch (SROM_WR | SROM_SR | DT_IN | DT_CS, addr); + srom_latch (SROM_WR | SROM_SR | DT_IN | DT_CS, addr); } } @@ -256,8 +256,8 @@ int dc_srom_load (u_short *dest) memset (dest, 0, 128); for (offset=0; offset<64; offset++) { - tmp = srom_rd (dc_srom_iobase, offset); - *dest++ = le16_to_cpu(tmp); + tmp = srom_rd (dc_srom_iobase, offset); + *dest++ = le16_to_cpu(tmp); } return (0); @@ -280,9 +280,9 @@ int dc_srom_store (u_short *src) for (offset=0; offset<64; offset++) { - if (srom_wr (dc_srom_iobase, offset, *src) == -1) - return (-1); - src++; + if (srom_wr (dc_srom_iobase, offset, *src) == -1) + return (-1); + src++; } return (0); diff --git a/board/eltec/bab7xx/el_srom.c b/board/eltec/bab7xx/el_srom.c index 56abdc7c26..73f8066e0d 100644 --- a/board/eltec/bab7xx/el_srom.c +++ b/board/eltec/bab7xx/el_srom.c @@ -83,14 +83,14 @@ static unsigned char eepReadByte (void) for (i = 0; i < 8; i++) { - out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = high */ - udelay(10); - out8(I2C_BUS_DAT, 0x40); /* SCLK = high SDIO = high */ - udelay(15); - buf <<= 1; - buf = (in8(I2C_BUS_DAT) & 0x20) ? (buf | 0x01) : (buf & 0xFE); - out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = high */ - udelay(10); + out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = high */ + udelay(10); + out8(I2C_BUS_DAT, 0x40); /* SCLK = high SDIO = high */ + udelay(15); + buf <<= 1; + buf = (in8(I2C_BUS_DAT) & 0x20) ? (buf | 0x01) : (buf & 0xFE); + out8(I2C_BUS_DAT, 0x00); /* SCLK = low SDIO = high */ + udelay(10); } return(buf); } @@ -113,13 +113,13 @@ static void eepWriteByte (register unsigned char buf) for (i = 7; i >= 0; i--) { - (buf & 0x80) ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK=low SDIO=data */ - udelay(10); - (buf & 0x80) ? out8(I2C_BUS_DAT, 0x60) : out8(I2C_BUS_DAT, 0x40); /* SCLK=high SDIO=data */ - udelay(15); - (buf & 0x80) ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK=low SDIO=data */ - udelay(10); - buf <<= 1; + (buf & 0x80) ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK=low SDIO=data */ + udelay(10); + (buf & 0x80) ? out8(I2C_BUS_DAT, 0x60) : out8(I2C_BUS_DAT, 0x40); /* SCLK=high SDIO=data */ + udelay(15); + (buf & 0x80) ? out8(I2C_BUS_DAT, 0x20) : out8(I2C_BUS_DAT, 0x00); /* SCLK=low SDIO=data */ + udelay(10); + buf <<= 1; } } @@ -184,39 +184,39 @@ unsigned char block; for (i=0;i>= 1; accu ^= f; - byte >>= 1; - } + byte = *ptr++; + for (i = 8; i; i--) + { + f = ((byte & 1) ^ (accu & 1)) ? 0x84083001 : 0; + accu >>= 1; accu ^= f; + byte >>= 1; + } } return(accu); } diff --git a/board/eltec/bab7xx/flash.c b/board/eltec/bab7xx/flash.c index 73496a13de..442dd00519 100644 --- a/board/eltec/bab7xx/flash.c +++ b/board/eltec/bab7xx/flash.c @@ -57,7 +57,7 @@ unsigned long flash_init (void) /* Init: no FLASHes known */ for (i=0; iflash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - flash_init(); + printf ("missing or unknown FLASH type\n"); + flash_init(); } if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; + printf ("missing or unknown FLASH type\n"); + return; } switch (info->flash_id & FLASH_VENDMASK) { case FLASH_MAN_AMD: - printf ("AMD "); - break; + printf ("AMD "); + break; default: - printf ("Unknown Vendor "); - break; + printf ("Unknown Vendor "); + break; } switch (info->flash_id & FLASH_TYPEMASK) { case AMD_ID_F040B: - printf ("AM29F040B (4 Mbit)\n"); - break; + printf ("AM29F040B (4 Mbit)\n"); + break; case AMD_ID_F016D: - printf ("AM29F016D (16 Mbit)\n"); - break; + printf ("AM29F016D (16 Mbit)\n"); + break; case AMD_ID_F032B: - printf ("AM29F032B (32 Mbit)\n"); - break; + printf ("AM29F032B (32 Mbit)\n"); + break; default: - printf ("Unknown Chip Type\n"); - break; + printf ("Unknown Chip Type\n"); + break; } if (info->size >= (1 << 20)) { - printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); + printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); } else { - printf (" Size: %ld kB in %d Sectors\n", info->size >> 10, info->sector_count); + printf (" Size: %ld kB in %d Sectors\n", info->size >> 10, info->sector_count); } printf (" Sector Start Addresses:"); for (i=0; isector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count-1)) - size = info->start[i+1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k=0; kstart[i], - erased ? " E" : " ", - info->protect[i] ? "RO " : " "); + /* + * Check if whole sector is erased + */ + if (i != (info->sector_count-1)) + size = info->start[i+1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k=0; kstart[i], + erased ? " E" : " ", + info->protect[i] ? "RO " : " "); } printf ("\n"); } @@ -226,37 +226,37 @@ ulong flash_get_size (vu_long *addr, flash_info_t *info) /* We accept only two AMD types */ switch (vendor) { case (FLASH_WORD_SIZE)AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; + info->flash_id = FLASH_MAN_AMD; + break; default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ } switch (devid) { case (FLASH_WORD_SIZE)AMD_ID_F040B: - info->flash_id |= AMD_ID_F040B; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 0.5 MB */ + info->flash_id |= AMD_ID_F040B; + info->sector_count = 8; + info->size = 0x00080000; + break; /* => 0.5 MB */ case (FLASH_WORD_SIZE)AMD_ID_F016D: - info->flash_id |= AMD_ID_F016D; - info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ + info->flash_id |= AMD_ID_F016D; + info->sector_count = 32; + info->size = 0x00200000; + break; /* => 2 MB */ case (FLASH_WORD_SIZE)AMD_ID_F032B: - info->flash_id |= AMD_ID_F032B; - info->sector_count = 64; - info->size = 0x00400000; - break; /* => 4 MB */ + info->flash_id |= AMD_ID_F032B; + info->sector_count = 64; + info->size = 0x00400000; + break; /* => 4 MB */ default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ } @@ -266,20 +266,20 @@ ulong flash_get_size (vu_long *addr, flash_info_t *info) /* check for protected sectors */ for (i = 0; i < info->sector_count; i++) { - /* sector base address */ - info->start[i] = base + i * (info->size / info->sector_count); - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - caddr = (volatile unsigned char *)(info->start[i]); - info->protect[i] = caddr[2] & 1; + /* sector base address */ + info->start[i] = base + i * (info->size / info->sector_count); + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + caddr = (volatile unsigned char *)(info->start[i]); + info->protect[i] = caddr[2] & 1; } /* * Prevent writes to uninitialized FLASH. */ if (info->flash_id != FLASH_UNKNOWN) { - caddr = (volatile unsigned char *)info->start[0]; - caddr[0] = 0xF0; /* reset bank */ + caddr = (volatile unsigned char *)info->start[0]; + caddr[0] = 0xF0; /* reset bank */ } return (info->size); @@ -295,32 +295,32 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) int rc = 0; if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; } if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; + (info->flash_id > FLASH_AMD_COMP)) { + printf ("Can't erase unknown flash type - aborted\n"); + return 1; } prot = 0; for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } + if (info->protect[sect]) { + prot++; + } } if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); } else { - printf ("\n"); + printf ("\n"); } l_sect = -1; @@ -336,26 +336,26 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) /* Start erase on unprotected sectors */ for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (FLASH_WORD_SIZE *)(info->start[sect]); - if (info->flash_id & FLASH_MAN_SST) { - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */ - udelay(30000); /* wait 30 ms */ - } - else - addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ - l_sect = sect; - } + if (info->protect[sect] == 0) { /* not protected */ + addr = (FLASH_WORD_SIZE *)(info->start[sect]); + if (info->flash_id & FLASH_MAN_SST) { + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */ + udelay(30000); /* wait 30 ms */ + } + else + addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ + l_sect = sect; + } } /* re-enable interrupts if necessary */ if (flag) - enable_interrupts(); + enable_interrupts(); /* wait at least 80us - let's wait 1 ms */ udelay (1000); @@ -364,21 +364,21 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) * We wait for the last triggered sector */ if (l_sect < 0) - goto DONE; + goto DONE; start = get_timer (0); last = start; addr = (FLASH_WORD_SIZE *)(info->start[l_sect]); while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) { - if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + serial_putc ('.'); + last = now; + } } DONE: @@ -408,42 +408,42 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) * handle unaligned start bytes */ if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; + data = 0; + for (i=0, cp=wp; i0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; } /* * handle word aligned part */ while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; + data = 0; + for (i=0; i<4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; } if (cnt == 0) { - return (0); + return (0); } /* @@ -451,11 +451,11 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) */ data = 0; for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; + data = (data << 8) | *src++; + --cnt; } for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); + data = (data << 8) | (*(uchar *)cp); } return (write_word(info, wp, data)); @@ -469,45 +469,44 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) */ static int write_word (flash_info_t *info, ulong dest, ulong data) { - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]); - volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest; - volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data; + volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]); + volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest; + volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data; ulong start; int flag; - int i; + int i; /* Check if Flash is (sufficiently) erased */ if ((*((volatile FLASH_WORD_SIZE *)dest) & - (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) { - return (2); + (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) { + return (2); } /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); - for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++) - { - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0; + for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++) + { + addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0; - dest2[i] = data2[i]; + dest2[i] = data2[i]; - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); - /* data polling for D7 */ - start = get_timer (0); - while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != - (data2[i] & (FLASH_WORD_SIZE)0x00800080)) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - return (1); - } - } - } + /* data polling for D7 */ + start = get_timer (0); + while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != + (data2[i] & (FLASH_WORD_SIZE)0x00800080)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return (1); + } + } + } return (0); } /*----------------------------------------------------------------------------*/ - diff --git a/board/eltec/bab7xx/l2cache.c b/board/eltec/bab7xx/l2cache.c index 748d515f44..077f2c919d 100644 --- a/board/eltec/bab7xx/l2cache.c +++ b/board/eltec/bab7xx/l2cache.c @@ -51,104 +51,104 @@ int l2_cache_enable (int l2control) { if (l2control) /* BAB750 */ { - mtspr(SPRN_L2CR, l2control); - mtspr(SPRN_L2CR, (l2control | L2CR_I)); - while (mfspr(SPRN_L2CR) & L2CR_IP) - ; - mtspr(SPRN_L2CR, (l2control | L2CR_E)); - return (0); + mtspr(SPRN_L2CR, l2control); + mtspr(SPRN_L2CR, (l2control | L2CR_I)); + while (mfspr(SPRN_L2CR) & L2CR_IP) + ; + mtspr(SPRN_L2CR, (l2control | L2CR_E)); + return (0); } else /* BAB740 */ { - int picr1, picr2, mask; - int picr2CacheSize, cacheSize; - int *d; - int devbusfn; - u32 reg32; - - devbusfn = pci_find_device(PCI_VENDOR_ID_MOTOROLA, - PCI_DEVICE_ID_MOTOROLA_MPC106, 0); - if (devbusfn == -1) - return (-1); - - pci_read_config_dword (devbusfn, PCI_PICR2, ®32); - reg32 &= ~PICR2_L2_EN; - pci_write_config_dword (devbusfn, PCI_PICR2, reg32); - - /* cache size */ - if (*(volatile unsigned char *) (CFG_ISA_IO + 0x220) & 0x04) - { - /* cache size is 512 KB */ - picr2CacheSize = PICR2_L2_SIZE_512K; - cacheSize = 0x80000; - } - else - { - /* cache size is 256 KB */ - picr2CacheSize = PICR2_L2_SIZE_256K; - cacheSize = 0x40000; - } - - /* setup PICR1 */ - mask = - ~(PICR1_CF_BREAD_WS(1) | - PICR1_CF_BREAD_WS(2) | - PICR1_CF_CBA(0xff) | - PICR1_CF_CACHE_1G | - PICR1_CF_DPARK | - PICR1_CF_APARK | - PICR1_CF_L2_CACHE_MASK); - - picr1 = - (PICR1_CF_CBA(0x3f) | - PICR1_CF_CACHE_1G | - PICR1_CF_APARK | - PICR1_CF_DPARK | - PICR1_CF_L2_COPY_BACK); /* PICR1_CF_L2_WRITE_THROUGH */ - - pci_read_config_dword (devbusfn, PCI_PICR1, ®32); - reg32 &= mask; - reg32 |= picr1; - pci_write_config_dword (devbusfn, PCI_PICR1, reg32); - - /* - * invalidate all L2 cache - */ - picr2 = - (PICR2_CF_INV_MODE | - PICR2_CF_HIT_HIGH | - PICR2_CF_MOD_HIGH | - PICR2_CF_L2_HIT_DELAY(1) | - PICR2_CF_APHASE_WS(1) | - picr2CacheSize); - - pci_write_config_dword (devbusfn, PCI_PICR2, picr2); - - /* - * dummy transactions - */ - for (d=0; d<(int *)(2*cacheSize); d++) - dummy(*d); - - pci_write_config_dword (devbusfn, PCI_PICR2, - (picr2 | PICR2_CF_FLUSH_L2)); - - /* setup PICR2 */ - picr2 = - (PICR2_CF_FAST_CASTOUT | - PICR2_CF_WDATA | - PICR2_CF_ADDR_ONLY_DISABLE | - PICR2_CF_HIT_HIGH | - PICR2_CF_MOD_HIGH | - PICR2_L2_UPDATE_EN | - PICR2_L2_EN | - PICR2_CF_APHASE_WS(1) | - PICR2_CF_DATA_RAM_PBURST | - PICR2_CF_L2_HIT_DELAY(1) | - PICR2_CF_SNOOP_WS(2) | - picr2CacheSize); - - pci_write_config_dword (devbusfn, PCI_PICR2, picr2); + int picr1, picr2, mask; + int picr2CacheSize, cacheSize; + int *d; + int devbusfn; + u32 reg32; + + devbusfn = pci_find_device(PCI_VENDOR_ID_MOTOROLA, + PCI_DEVICE_ID_MOTOROLA_MPC106, 0); + if (devbusfn == -1) + return (-1); + + pci_read_config_dword (devbusfn, PCI_PICR2, ®32); + reg32 &= ~PICR2_L2_EN; + pci_write_config_dword (devbusfn, PCI_PICR2, reg32); + + /* cache size */ + if (*(volatile unsigned char *) (CFG_ISA_IO + 0x220) & 0x04) + { + /* cache size is 512 KB */ + picr2CacheSize = PICR2_L2_SIZE_512K; + cacheSize = 0x80000; + } + else + { + /* cache size is 256 KB */ + picr2CacheSize = PICR2_L2_SIZE_256K; + cacheSize = 0x40000; + } + + /* setup PICR1 */ + mask = + ~(PICR1_CF_BREAD_WS(1) | + PICR1_CF_BREAD_WS(2) | + PICR1_CF_CBA(0xff) | + PICR1_CF_CACHE_1G | + PICR1_CF_DPARK | + PICR1_CF_APARK | + PICR1_CF_L2_CACHE_MASK); + + picr1 = + (PICR1_CF_CBA(0x3f) | + PICR1_CF_CACHE_1G | + PICR1_CF_APARK | + PICR1_CF_DPARK | + PICR1_CF_L2_COPY_BACK); /* PICR1_CF_L2_WRITE_THROUGH */ + + pci_read_config_dword (devbusfn, PCI_PICR1, ®32); + reg32 &= mask; + reg32 |= picr1; + pci_write_config_dword (devbusfn, PCI_PICR1, reg32); + + /* + * invalidate all L2 cache + */ + picr2 = + (PICR2_CF_INV_MODE | + PICR2_CF_HIT_HIGH | + PICR2_CF_MOD_HIGH | + PICR2_CF_L2_HIT_DELAY(1) | + PICR2_CF_APHASE_WS(1) | + picr2CacheSize); + + pci_write_config_dword (devbusfn, PCI_PICR2, picr2); + + /* + * dummy transactions + */ + for (d=0; d<(int *)(2*cacheSize); d++) + dummy(*d); + + pci_write_config_dword (devbusfn, PCI_PICR2, + (picr2 | PICR2_CF_FLUSH_L2)); + + /* setup PICR2 */ + picr2 = + (PICR2_CF_FAST_CASTOUT | + PICR2_CF_WDATA | + PICR2_CF_ADDR_ONLY_DISABLE | + PICR2_CF_HIT_HIGH | + PICR2_CF_MOD_HIGH | + PICR2_L2_UPDATE_EN | + PICR2_L2_EN | + PICR2_CF_APHASE_WS(1) | + PICR2_CF_DATA_RAM_PBURST | + PICR2_CF_L2_HIT_DELAY(1) | + PICR2_CF_SNOOP_WS(2) | + picr2CacheSize); + + pci_write_config_dword (devbusfn, PCI_PICR2, picr2); } return (0); } @@ -156,4 +156,3 @@ int l2_cache_enable (int l2control) /*----------------------------------------------------------------------------*/ #endif /* (CFG_L2_BAB7xx) */ - diff --git a/board/eltec/bab7xx/misc.c b/board/eltec/bab7xx/misc.c index 1b4376dcda..b50d11b751 100644 --- a/board/eltec/bab7xx/misc.c +++ b/board/eltec/bab7xx/misc.c @@ -62,7 +62,7 @@ int misc_init_r (void) u_int i, l, initSrom, copyNv; char buf[256]; char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0, - 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 }; + 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 }; pci_dev_t bdf; char sromSYM[] = { @@ -131,204 +131,204 @@ int misc_init_r (void) /* read out current revision srom contens */ el_srom_load (0x0000, (u_char*)&eerev, sizeof(revinfo), - SECOND_DEVICE, FIRST_BLOCK); + SECOND_DEVICE, FIRST_BLOCK); /* read out current nvram shadow image */ nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE); if (strcmp (eerev.magic, "ELTEC") != 0) { - /* srom is not initialized -> create a default revision info */ - for (i = 0, ptr = (u_char *)&eerev; i < sizeof(revinfo); i++) - *ptr++ = 0x00; - strcpy(eerev.magic, "ELTEC"); - eerev.revrev[0] = 1; - eerev.revrev[1] = 0; - eerev.size = 0x00E0; - eerev.category[0] = 0x01; - - /* node id from dead e128 as default */ - eerev.etheraddr[0] = 0x00; - eerev.etheraddr[1] = 0x00; - eerev.etheraddr[2] = 0x5B; - eerev.etheraddr[3] = 0x00; - eerev.etheraddr[4] = 0x2E; - eerev.etheraddr[5] = 0x4D; - - /* cache config word for bab750 */ - *(int*)&eerev.res[0] = CLK2P0TO1_1MB_PB_0P5DH; - - initSrom = 1; /* force dialog */ - copyNv = 1; /* copy to nvram */ + /* srom is not initialized -> create a default revision info */ + for (i = 0, ptr = (u_char *)&eerev; i < sizeof(revinfo); i++) + *ptr++ = 0x00; + strcpy(eerev.magic, "ELTEC"); + eerev.revrev[0] = 1; + eerev.revrev[1] = 0; + eerev.size = 0x00E0; + eerev.category[0] = 0x01; + + /* node id from dead e128 as default */ + eerev.etheraddr[0] = 0x00; + eerev.etheraddr[1] = 0x00; + eerev.etheraddr[2] = 0x5B; + eerev.etheraddr[3] = 0x00; + eerev.etheraddr[4] = 0x2E; + eerev.etheraddr[5] = 0x4D; + + /* cache config word for bab750 */ + *(int*)&eerev.res[0] = CLK2P0TO1_1MB_PB_0P5DH; + + initSrom = 1; /* force dialog */ + copyNv = 1; /* copy to nvram */ } if ((copyNv == 0) && (el_srom_checksum((u_char*)&eerev, CFG_SROM_SIZE) != - el_srom_checksum((u_char*)buf, CFG_SROM_SIZE))) + el_srom_checksum((u_char*)buf, CFG_SROM_SIZE))) { - printf ("Invalid revision info copy in nvram !\n"); - printf ("Press key:\n to copy current revision info to nvram.\n"); - printf (" to reenter revision info.\n"); - printf ("=> "); - if (0 != readline (NULL)) - { - switch ((char)toupper(console_buffer[0])) - { - case 'C': - copyNv = 1; - break; - case 'R': - copyNv = 1; - initSrom = 1; - break; - } - } + printf ("Invalid revision info copy in nvram !\n"); + printf ("Press key:\n to copy current revision info to nvram.\n"); + printf (" to reenter revision info.\n"); + printf ("=> "); + if (0 != readline (NULL)) + { + switch ((char)toupper(console_buffer[0])) + { + case 'C': + copyNv = 1; + break; + case 'R': + copyNv = 1; + initSrom = 1; + break; + } + } } if (initSrom) { - memcpy (buf, &eerev.revision[0][0], 14); /* save all revision info */ - printf ("Enter revision number (0-9): %c ", eerev.revision[0][0]); - if (0 != readline (NULL)) - { - eerev.revision[0][0] = (char)toupper(console_buffer[0]); - memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */ - } - - printf ("Enter revision character (A-Z): %c ", eerev.revision[0][1]); - if (1 == readline (NULL)) - { - eerev.revision[0][1] = (char)toupper(console_buffer[0]); - } - - printf ("Enter board name (V-XXXX-XXXX): %s ", (char *)&eerev.board); - if (11 == readline (NULL)) - { - for (i=0; i<11; i++) - eerev.board[i] = (char)toupper(console_buffer[i]); - eerev.board[11] = '\0'; - } - - printf ("Enter serial number: %s ", (char *)&eerev.serial ); - if (6 == readline (NULL)) - { - for (i=0; i<6; i++) - eerev.serial[i] = console_buffer[i]; - eerev.serial[6] = '\0'; - } - - printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", - eerev.etheraddr[0], eerev.etheraddr[1], - eerev.etheraddr[2], eerev.etheraddr[3], - eerev.etheraddr[4], eerev.etheraddr[5]); - if (12 == readline (NULL)) - { - for (i=0; i<12; i+=2) - eerev.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] + - hex[toupper(console_buffer[i+1])-'0']); - } - - l = strlen ((char *)&eerev.text); - printf("Add to text section (max 64 chr): %s ", (char *)&eerev.text ); - if (0 != readline (NULL)) - { - for (i = l; i<63; i++) - eerev.text[i] = console_buffer[i-l]; - eerev.text[63] = '\0'; - } - - if (strstr ((char *)&eerev.board, "75") != NULL) - eltec_board = 750; - else - eltec_board = 740; - - if (eltec_board == 750) - { - if (CPU_TYPE == CPU_TYPE_750) - *(int*)&eerev.res[0] = CLK2P0TO1_1MB_PB_0P5DH; - else - *(int*)&eerev.res[0] = CLK2P5TO1_1MB_PB_0P5DH; - - printf("Enter L2Cache config word with leading zero (HEX): %08X ", - *(int*)&eerev.res[0] ); - if (0 != readline (NULL)) - { - for (i=0; i<7; i+=2) - { - eerev.res[i>>1] = - (char)(16*hex[toupper(console_buffer[i])-'0'] + - hex[toupper(console_buffer[i+1])-'0']); - } - } - - /* prepare network eeprom */ - sromMII[20] = eerev.etheraddr[0]; - sromMII[21] = eerev.etheraddr[1]; - sromMII[22] = eerev.etheraddr[2]; - sromMII[23] = eerev.etheraddr[3]; - sromMII[24] = eerev.etheraddr[4]; - sromMII[25] = eerev.etheraddr[5]; - printf("\nSRom: Writing DEC21143 MII info .. "); - - if (dc_srom_store ((u_short *)sromMII) == -1) - printf("FAILED\n"); - else - printf("OK\n"); - } - - if (eltec_board == 740) - { - *(int *)&eerev.res[0] = 0; - sromSYM[20] = eerev.etheraddr[0]; - sromSYM[21] = eerev.etheraddr[1]; - sromSYM[22] = eerev.etheraddr[2]; - sromSYM[23] = eerev.etheraddr[3]; - sromSYM[24] = eerev.etheraddr[4]; - sromSYM[25] = eerev.etheraddr[5]; - printf("\nSRom: Writing DEC21143 SYM info .. "); - - if (dc_srom_store ((u_short *)sromSYM) == -1) - printf("FAILED\n"); - else - printf("OK\n"); - } - - /* update CRC */ - eerev.crc = el_srom_checksum((u_char *)eerev.board, eerev.size); - - /* write new values */ - printf("\nSRom: Writing revision info ...... "); - if (el_srom_store((BLOCK_SIZE-sizeof(revinfo)), (u_char *)&eerev, - sizeof(revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1) - printf("FAILED\n\n"); - else - printf("OK\n\n"); - - /* write new values as shadow image to nvram */ - nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE); + memcpy (buf, &eerev.revision[0][0], 14); /* save all revision info */ + printf ("Enter revision number (0-9): %c ", eerev.revision[0][0]); + if (0 != readline (NULL)) + { + eerev.revision[0][0] = (char)toupper(console_buffer[0]); + memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */ + } + + printf ("Enter revision character (A-Z): %c ", eerev.revision[0][1]); + if (1 == readline (NULL)) + { + eerev.revision[0][1] = (char)toupper(console_buffer[0]); + } + + printf ("Enter board name (V-XXXX-XXXX): %s ", (char *)&eerev.board); + if (11 == readline (NULL)) + { + for (i=0; i<11; i++) + eerev.board[i] = (char)toupper(console_buffer[i]); + eerev.board[11] = '\0'; + } + + printf ("Enter serial number: %s ", (char *)&eerev.serial ); + if (6 == readline (NULL)) + { + for (i=0; i<6; i++) + eerev.serial[i] = console_buffer[i]; + eerev.serial[6] = '\0'; + } + + printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", + eerev.etheraddr[0], eerev.etheraddr[1], + eerev.etheraddr[2], eerev.etheraddr[3], + eerev.etheraddr[4], eerev.etheraddr[5]); + if (12 == readline (NULL)) + { + for (i=0; i<12; i+=2) + eerev.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] + + hex[toupper(console_buffer[i+1])-'0']); + } + + l = strlen ((char *)&eerev.text); + printf("Add to text section (max 64 chr): %s ", (char *)&eerev.text ); + if (0 != readline (NULL)) + { + for (i = l; i<63; i++) + eerev.text[i] = console_buffer[i-l]; + eerev.text[63] = '\0'; + } + + if (strstr ((char *)&eerev.board, "75") != NULL) + eltec_board = 750; + else + eltec_board = 740; + + if (eltec_board == 750) + { + if (CPU_TYPE == CPU_TYPE_750) + *(int*)&eerev.res[0] = CLK2P0TO1_1MB_PB_0P5DH; + else + *(int*)&eerev.res[0] = CLK2P5TO1_1MB_PB_0P5DH; + + printf("Enter L2Cache config word with leading zero (HEX): %08X ", + *(int*)&eerev.res[0] ); + if (0 != readline (NULL)) + { + for (i=0; i<7; i+=2) + { + eerev.res[i>>1] = + (char)(16*hex[toupper(console_buffer[i])-'0'] + + hex[toupper(console_buffer[i+1])-'0']); + } + } + + /* prepare network eeprom */ + sromMII[20] = eerev.etheraddr[0]; + sromMII[21] = eerev.etheraddr[1]; + sromMII[22] = eerev.etheraddr[2]; + sromMII[23] = eerev.etheraddr[3]; + sromMII[24] = eerev.etheraddr[4]; + sromMII[25] = eerev.etheraddr[5]; + printf("\nSRom: Writing DEC21143 MII info .. "); + + if (dc_srom_store ((u_short *)sromMII) == -1) + printf("FAILED\n"); + else + printf("OK\n"); + } + + if (eltec_board == 740) + { + *(int *)&eerev.res[0] = 0; + sromSYM[20] = eerev.etheraddr[0]; + sromSYM[21] = eerev.etheraddr[1]; + sromSYM[22] = eerev.etheraddr[2]; + sromSYM[23] = eerev.etheraddr[3]; + sromSYM[24] = eerev.etheraddr[4]; + sromSYM[25] = eerev.etheraddr[5]; + printf("\nSRom: Writing DEC21143 SYM info .. "); + + if (dc_srom_store ((u_short *)sromSYM) == -1) + printf("FAILED\n"); + else + printf("OK\n"); + } + + /* update CRC */ + eerev.crc = el_srom_checksum((u_char *)eerev.board, eerev.size); + + /* write new values */ + printf("\nSRom: Writing revision info ...... "); + if (el_srom_store((BLOCK_SIZE-sizeof(revinfo)), (u_char *)&eerev, + sizeof(revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1) + printf("FAILED\n\n"); + else + printf("OK\n\n"); + + /* write new values as shadow image to nvram */ + nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE); } /*if (initSrom) */ /* copy current values as shadow image to nvram */ if (initSrom == 0 && copyNv == 1) - nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE); + nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE); /* update environment */ sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x", - eerev.etheraddr[0], eerev.etheraddr[1], - eerev.etheraddr[2], eerev.etheraddr[3], - eerev.etheraddr[4], eerev.etheraddr[5]); + eerev.etheraddr[0], eerev.etheraddr[1], + eerev.etheraddr[2], eerev.etheraddr[3], + eerev.etheraddr[4], eerev.etheraddr[5]); setenv ("ethaddr", buf); /* print actual board identification */ printf("Ident: %s Ser %s Rev %c%c\n", - eerev.board, (char *)&eerev.serial, - eerev.revision[0][0], eerev.revision[0][1]); + eerev.board, (char *)&eerev.serial, + eerev.revision[0][0], eerev.revision[0][1]); /* global board ident */ if (strstr ((char *)&eerev.board, "75") != NULL) - eltec_board = 750; + eltec_board = 750; else - eltec_board = 740; + eltec_board = 740; /* * L2 cache configuration @@ -337,12 +337,12 @@ int misc_init_r (void) ptr = getenv("l2cache"); if (*ptr == '0') { - printf ("Cache: L2 NOT activated on BAB%d\n", eltec_board); + printf ("Cache: L2 NOT activated on BAB%d\n", eltec_board); } else { - printf ("Cache: L2 activated on BAB%d\n", eltec_board); - l2_cache_enable(*(int*)&eerev.res[0]); + printf ("Cache: L2 activated on BAB%d\n", eltec_board); + l2_cache_enable(*(int*)&eerev.res[0]); } #endif @@ -351,12 +351,12 @@ int misc_init_r (void) */ if ((ptr = getenv ("ata_reset_time")) != NULL) { - ata_reset_time = (int)simple_strtoul (ptr, NULL, 10); + ata_reset_time = (int)simple_strtoul (ptr, NULL, 10); } else { - sprintf (buf, "%d", ata_reset_time); - setenv ("ata_reset_time", buf); + sprintf (buf, "%d", ata_reset_time); + setenv ("ata_reset_time", buf); } /* @@ -364,55 +364,55 @@ int misc_init_r (void) */ if ((ptr = getenv ("scsi_reset_time")) != NULL) { - scsi_reset_time = (int)simple_strtoul (ptr, NULL, 10); + scsi_reset_time = (int)simple_strtoul (ptr, NULL, 10); } else { - sprintf (buf, "%d", scsi_reset_time); - setenv ("scsi_reset_time", buf); + sprintf (buf, "%d", scsi_reset_time); + setenv ("scsi_reset_time", buf); } if ((bdf = pci_find_device(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, 0)) > 0) { - if (pci_find_device(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C860, 0) > 0) - { - /* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 Mhz */ - scsi_dev_id = PCI_DEVICE_ID_NCR_53C860; - scsi_max_scsi_id = 7; - scsi_sym53c8xx_ccf = 0x15; - pci_write_config_byte (bdf, WINBOND_IDEIRCR, 0xb0); - } - - if ((ptr = getenv ("ide_dma_off")) != NULL) - { - u_long dma_off = simple_strtoul (ptr, NULL, 10); - /* - * setup user defined registers - * s.a. linux/drivers/ide/sl82c105.c - */ - bdf |= PCI_BDF(0,0,1); /* ide user reg at bdf function 1 */ - if (dma_off & 1) - { - pci_write_config_byte (bdf, 0x46, 1); - printf("IDE: DMA off flag set: Bus 0 : Dev 0\n"); - } - if (dma_off & 2) - { - pci_write_config_byte (bdf, 0x4a, 1); - printf("IDE: DMA off flag set: Bus 0 : Dev 1\n"); - } - if (dma_off & 4) - { - pci_write_config_byte (bdf, 0x4e, 1); - printf("IDE: DMA off flag set: Bus 1 : Dev 0\n"); - } - if (dma_off & 8) - { - pci_write_config_byte (bdf, 0x52, 1); - printf("IDE: DMA off flag set: Bus 1 : Dev 1\n"); - } - } + if (pci_find_device(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C860, 0) > 0) + { + /* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 Mhz */ + scsi_dev_id = PCI_DEVICE_ID_NCR_53C860; + scsi_max_scsi_id = 7; + scsi_sym53c8xx_ccf = 0x15; + pci_write_config_byte (bdf, WINBOND_IDEIRCR, 0xb0); + } + + if ((ptr = getenv ("ide_dma_off")) != NULL) + { + u_long dma_off = simple_strtoul (ptr, NULL, 10); + /* + * setup user defined registers + * s.a. linux/drivers/ide/sl82c105.c + */ + bdf |= PCI_BDF(0,0,1); /* ide user reg at bdf function 1 */ + if (dma_off & 1) + { + pci_write_config_byte (bdf, 0x46, 1); + printf("IDE: DMA off flag set: Bus 0 : Dev 0\n"); + } + if (dma_off & 2) + { + pci_write_config_byte (bdf, 0x4a, 1); + printf("IDE: DMA off flag set: Bus 0 : Dev 1\n"); + } + if (dma_off & 4) + { + pci_write_config_byte (bdf, 0x4e, 1); + printf("IDE: DMA off flag set: Bus 1 : Dev 0\n"); + } + if (dma_off & 8) + { + pci_write_config_byte (bdf, 0x52, 1); + printf("IDE: DMA off flag set: Bus 1 : Dev 1\n"); + } + } } return (0); } @@ -498,48 +498,48 @@ void dc21x4x_select_media(struct eth_device* dev) if (eltec_board == 740) { - printf("SYM media select "); /* BAB740 */ - /* start autoneg. with 10 mbit */ - media_reg_init (dev, 0x3ffff, 0x08af0008, 0x00a10008, 0x00a50008, 0x02400080); - ext = status = 0; - for (i=0; i<2000+ext; i++) - { - status = INL(dev, DE4X5_SISR); - udelay(1000); - if (status & 0x2000) ext = 2000; - if ((status & 0x7000) == 0x5000) break; - } - - /* autoneg. ok -> 100MB FD */ - if ((status & 0x0100f000) == 0x0100d000) - { - media_reg_init (dev, 0x37f7f, 0x08270008, 0x00210008, 0x00250008, 0x03c40280); - printf("100baseTx-FD\n"); - } - /* autoneg. ok -> 100MB HD */ - else if ((status & 0x0080f000) == 0x0080d000) - { - media_reg_init (dev, 0x17f7f, 0x08270008, 0x00210008, 0x00250008, 0x03c40080); - printf("100baseTx\n"); - } - /* autoneg. ok -> 10MB FD */ - else if ((status & 0x0040f000) == 0x0040d000) - { - media_reg_init (dev, 0x07f7f, 0x08af0008, 0x00a10008, 0x00a50008, 0x02400280); - printf("10baseT-FD\n"); - } - /* autoneg. fail -> 10MB HD */ - else - { - media_reg_init (dev, 0x7f7f, 0x08af0008, 0x00a10008, 0x00a50008, - (OMR_SDP | OMR_TTM | OMR_PM)); - printf("10baseT\n"); - } + printf("SYM media select "); /* BAB740 */ + /* start autoneg. with 10 mbit */ + media_reg_init (dev, 0x3ffff, 0x08af0008, 0x00a10008, 0x00a50008, 0x02400080); + ext = status = 0; + for (i=0; i<2000+ext; i++) + { + status = INL(dev, DE4X5_SISR); + udelay(1000); + if (status & 0x2000) ext = 2000; + if ((status & 0x7000) == 0x5000) break; + } + + /* autoneg. ok -> 100MB FD */ + if ((status & 0x0100f000) == 0x0100d000) + { + media_reg_init (dev, 0x37f7f, 0x08270008, 0x00210008, 0x00250008, 0x03c40280); + printf("100baseTx-FD\n"); + } + /* autoneg. ok -> 100MB HD */ + else if ((status & 0x0080f000) == 0x0080d000) + { + media_reg_init (dev, 0x17f7f, 0x08270008, 0x00210008, 0x00250008, 0x03c40080); + printf("100baseTx\n"); + } + /* autoneg. ok -> 10MB FD */ + else if ((status & 0x0040f000) == 0x0040d000) + { + media_reg_init (dev, 0x07f7f, 0x08af0008, 0x00a10008, 0x00a50008, 0x02400280); + printf("10baseT-FD\n"); + } + /* autoneg. fail -> 10MB HD */ + else + { + media_reg_init (dev, 0x7f7f, 0x08af0008, 0x00a10008, 0x00a50008, + (OMR_SDP | OMR_TTM | OMR_PM)); + printf("10baseT\n"); + } } else { - printf("MII media selected\n"); /* BAB750 */ - OUTL(dev, OMR_SDP | OMR_PS | OMR_PM, DE4X5_OMR); /* CSR6 */ + printf("MII media selected\n"); /* BAB750 */ + OUTL(dev, OMR_SDP | OMR_PS | OMR_PM, DE4X5_OMR); /* CSR6 */ } } #endif /* CONFIG_TULIP_SELECT_MEDIA */ diff --git a/board/eltec/bab7xx/pci.c b/board/eltec/bab7xx/pci.c index a5fcfef9ce..edbd3ddf73 100644 --- a/board/eltec/bab7xx/pci.c +++ b/board/eltec/bab7xx/pci.c @@ -43,48 +43,48 @@ void pci_init_board(void) hose->last_busno = 0xff; pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, /* * Attention: pci_hose_phys_to_bus() failes in address compare, * so we need (CFG_PCI_MEMORY_SIZE-1) */ - CFG_PCI_MEMORY_SIZE-1, - PCI_REGION_MEM | PCI_REGION_MEMORY); + CFG_PCI_MEMORY_SIZE-1, + PCI_REGION_MEM | PCI_REGION_MEMORY); /* PCI memory space */ pci_set_region(hose->regions + 1, - CFG_PCI_MEM_BUS, - CFG_PCI_MEM_PHYS, - CFG_PCI_MEM_SIZE, - PCI_REGION_MEM); + CFG_PCI_MEM_BUS, + CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, + PCI_REGION_MEM); /* ISA/PCI memory space */ pci_set_region(hose->regions + 2, - CFG_ISA_MEM_BUS, - CFG_ISA_MEM_PHYS, - CFG_ISA_MEM_SIZE, - PCI_REGION_MEM); + CFG_ISA_MEM_BUS, + CFG_ISA_MEM_PHYS, + CFG_ISA_MEM_SIZE, + PCI_REGION_MEM); /* PCI I/O space */ pci_set_region(hose->regions + 3, - CFG_PCI_IO_BUS, - CFG_PCI_IO_PHYS, - CFG_PCI_IO_SIZE, - PCI_REGION_IO); + CFG_PCI_IO_BUS, + CFG_PCI_IO_PHYS, + CFG_PCI_IO_SIZE, + PCI_REGION_IO); /* ISA/PCI I/O space */ pci_set_region(hose->regions + 4, - CFG_ISA_IO_BUS, - CFG_ISA_IO_PHYS, - CFG_ISA_IO_SIZE, - PCI_REGION_IO); + CFG_ISA_IO_BUS, + CFG_ISA_IO_PHYS, + CFG_ISA_IO_SIZE, + PCI_REGION_IO); hose->region_count = 5; pci_setup_indirect(hose, - MPC106_REG_ADDR, - MPC106_REG_DATA); + MPC106_REG_ADDR, + MPC106_REG_DATA); pci_register_hose(hose); @@ -93,9 +93,9 @@ void pci_init_board(void) /* Initialises the MPC10x PCI Configuration regs. */ pci_read_config_dword (PCI_BDF(0,0,0), PCI_PICR2, ®32); reg32 |= PICR2_CF_SNOOP_WS(3) | - PICR2_CF_FLUSH_L2 | - PICR2_CF_L2_HIT_DELAY(3) | - PICR2_CF_APHASE_WS(3); + PICR2_CF_FLUSH_L2 | + PICR2_CF_L2_HIT_DELAY(3) | + PICR2_CF_APHASE_WS(3); reg32 &= ~(PICR2_L2_EN | PICR2_L2_UPDATE_EN); pci_write_config_dword (PCI_BDF(0,0,0), PCI_PICR2, reg32); @@ -108,12 +108,12 @@ void pci_init_board(void) pci_read_config_dword (PCI_BDF(0,0,0), PCI_PICR1, ®32); reg32 |= PICR1_CF_CBA(63) | - PICR1_CF_BREAD_WS(2) | - PICR1_MCP_EN | - PICR1_CF_DPARK | - PICR1_PROC_TYPE_604 | - PICR1_CF_LOOP_SNOOP | - PICR1_CF_APARK; + PICR1_CF_BREAD_WS(2) | + PICR1_MCP_EN | + PICR1_CF_DPARK | + PICR1_PROC_TYPE_604 | + PICR1_CF_LOOP_SNOOP | + PICR1_CF_APARK; pci_write_config_dword (PCI_BDF(0,0,0), PCI_PICR1, reg32); } diff --git a/board/eltec/bab7xx/srom.h b/board/eltec/bab7xx/srom.h index 7924bcd40c..c18ab91645 100644 --- a/board/eltec/bab7xx/srom.h +++ b/board/eltec/bab7xx/srom.h @@ -81,18 +81,18 @@ typedef struct { unsigned long el_srom_checksum (unsigned char *ptr, unsigned long size); int el_srom_load (unsigned char addr, unsigned char *buf, int cnt, - unsigned char device, unsigned char block); + unsigned char device, unsigned char block); int el_srom_store (unsigned char addr, unsigned char *buf, int cnt, - unsigned char device, unsigned char block); + unsigned char device, unsigned char block); int mpc107_i2c_init (unsigned long eumb_addr, unsigned long divider); int mpc107_i2c_read_byte (unsigned char device, unsigned char block, unsigned char offset); int mpc107_i2c_write_byte (unsigned char device, unsigned char block, - unsigned char offset, unsigned char val); + unsigned char offset, unsigned char val); int mpc107_srom_load (unsigned char addr, unsigned char *pBuf, int cnt, - unsigned char device, unsigned char block); + unsigned char device, unsigned char block); int mpc107_srom_store (unsigned char addr, unsigned char *pBuf, int cnt, - unsigned char device, unsigned char block); + unsigned char device, unsigned char block); int dc_srom_load (unsigned short *dest); int dc_srom_store (unsigned short *src); diff --git a/board/eltec/bab7xx/u-boot.lds b/board/eltec/bab7xx/u-boot.lds index de50bf49cc..0dfa8c0005 100644 --- a/board/eltec/bab7xx/u-boot.lds +++ b/board/eltec/bab7xx/u-boot.lds @@ -106,6 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + __start___ex_table = .; __ex_table : { *(__ex_table) } __stop___ex_table = .; diff --git a/board/eltec/elppc/Makefile b/board/eltec/elppc/Makefile index 1ed1a24c46..76b2cfe620 100644 --- a/board/eltec/elppc/Makefile +++ b/board/eltec/elppc/Makefile @@ -30,7 +30,7 @@ OBJS = $(BOARD).o flash.o pci.o misc.o mpc107_i2c.o eepro100_srom.o SOBJS = asm_init.o $(LIB): .depend $(OBJS) $(SOBJS) - $(AR) crv $@ $^ + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) @@ -46,12 +46,3 @@ distclean: clean sinclude .depend ######################################################################### - - - - - - - - - diff --git a/board/eltec/elppc/eepro100_srom.c b/board/eltec/elppc/eepro100_srom.c index a5e47cfe2f..9754c1d248 100644 --- a/board/eltec/elppc/eepro100_srom.c +++ b/board/eltec/elppc/eepro100_srom.c @@ -32,7 +32,7 @@ #include "srom.h" extern int eepro100_write_eeprom (struct eth_device* dev, - int location, int addr_len, unsigned short data); + int location, int addr_len, unsigned short data); /*----------------------------------------------------------------------------*/ @@ -43,7 +43,7 @@ unsigned short eepro100_srom_checksum (unsigned short *sromdata) for (i = 0; i < (EE_SIZE-1); i++) { - sum += sromdata[i]; + sum += sromdata[i]; } return (EE_CHECKSUM - sum); } @@ -57,7 +57,7 @@ int eepro100_srom_store (unsigned short *source) /* get onboard network iobase */ pci_read_config_dword(PCI_BDF(0,0x10,0), PCI_BASE_ADDRESS_0, - &onboard_dev.iobase); + &onboard_dev.iobase); onboard_dev.iobase &= ~0xf; source[63] = eepro100_srom_checksum (source); @@ -65,8 +65,8 @@ int eepro100_srom_store (unsigned short *source) for (count=0; count < EE_SIZE; count++) { if ( eepro100_write_eeprom ((struct eth_device*)&onboard_dev, - count, EE_ADDR_BITS, SROM_SHORT(source)) == -1 ) - return -1; + count, EE_ADDR_BITS, SROM_SHORT(source)) == -1 ) + return -1; source++; } return 0; @@ -89,22 +89,22 @@ void eepro100_srom_load (unsigned short *destination) /* get onboard network iobase */ pci_read_config_dword(PCI_BDF(0,0x10,0), PCI_BASE_ADDRESS_0, - &onboard_dev.iobase); + &onboard_dev.iobase); onboard_dev.iobase &= ~0xf; memset (destination, 0x65, 128); for (count=0; count < 0x40; count++) { - *destination++ = read_eeprom (struct eth_device*)&onboard_dev, - count, EE_ADDR_BITS); + *destination++ = read_eeprom (struct eth_device*)&onboard_dev, + count, EE_ADDR_BITS); #ifdef DEBUG - printf ("%04x ", *(destination - 1)); - if (lr++ == 7) - { - printf("\n"); - lr = 0; - } + printf ("%04x ", *(destination - 1)); + if (lr++ == 7) + { + printf("\n"); + lr = 0; + } #endif } } diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c index 97b70a4d8f..7b4d7d2009 100644 --- a/board/eltec/elppc/elppc.c +++ b/board/eltec/elppc/elppc.c @@ -30,82 +30,81 @@ int checkboard (void) { - puts ("Board: ELTEC PowerPC\n"); - return (0); + puts ("Board: ELTEC PowerPC\n"); + return (0); } /* ------------------------------------------------------------------------- */ int checkflash (void) { - /* TODO */ - printf ("Test not implemented !\n"); - return (0); + /* TODO */ + printf ("Test not implemented !\n"); + return (0); } /* ------------------------------------------------------------------------- */ static unsigned int mpc106_read_cfg_dword (unsigned int reg) { - unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC); + unsigned int reg_addr = MPC106_REG | (reg & 0xFFFFFFFC); - out32r(MPC106_REG_ADDR, reg_addr); + out32r (MPC106_REG_ADDR, reg_addr); - return (in32r(MPC106_REG_DATA | (reg & 0x3))); + return (in32r (MPC106_REG_DATA | (reg & 0x3))); } /* ------------------------------------------------------------------------- */ long int dram_size (int board_type) { - /* - * No actual initialisation to do - done when setting up - * PICRs MCCRs ME/SARs etc in asm_init.S. - */ + /* + * No actual initialisation to do - done when setting up + * PICRs MCCRs ME/SARs etc in asm_init.S. + */ - register unsigned long i, msar1, mear1, memSize; + register unsigned long i, msar1, mear1, memSize; #if defined(CFG_MEMTEST) - register unsigned long reg; + register unsigned long reg; - printf("Testing DRAM\n"); + printf ("Testing DRAM\n"); - /* write each mem addr with it's address */ - for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4) - *reg = reg; + /* write each mem addr with it's address */ + for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) + *reg = reg; - for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg+=4) - { - if (*reg != reg) - return -1; - } + for (reg = CFG_MEMTEST_START; reg < CFG_MEMTEST_END; reg += 4) { + if (*reg != reg) + return -1; + } #endif - /* - * Since MPC107 memory controller chip has already been set to - * control all memory, just read and interpret its memory boundery register. - */ - memSize = 0; - msar1 = mpc106_read_cfg_dword(MPC106_MSAR1); - mear1 = mpc106_read_cfg_dword(MPC106_MEAR1); - i = mpc106_read_cfg_dword(MPC106_MBER) & 0xf; - - do - { - if (i & 0x01) /* is bank enabled ? */ - memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1; - msar1 >>= 8; - mear1 >>= 8; - i >>= 1; - } while (i); - - return (memSize * 0x100000); + /* + * Since MPC107 memory controller chip has already been set to + * control all memory, just read and interpret its memory boundery register. + */ + memSize = 0; + msar1 = mpc106_read_cfg_dword (MPC106_MSAR1); + mear1 = mpc106_read_cfg_dword (MPC106_MEAR1); + i = mpc106_read_cfg_dword (MPC106_MBER) & 0xf; + + do { + if (i & 0x01) /* is bank enabled ? */ + memSize += (mear1 & 0xff) - (msar1 & 0xff) + 1; + msar1 >>= 8; + mear1 >>= 8; + i >>= 1; + } while (i); + + return (memSize * 0x100000); } + /* ------------------------------------------------------------------------- */ -long int initdram(int board_type) +long int initdram (int board_type) { - return dram_size(board_type); + return dram_size (board_type); } /* ------------------------------------------------------------------------- */ @@ -115,9 +114,10 @@ long int initdram(int board_type) * Register PI in the MPC 107 (at offset 0x41090 of the Embedded Utilities * Memory Block). */ -void do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) +int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - out8(MPC107_EUMB_PI, 1); + out8 (MPC107_EUMB_PI, 1); + return (0); } /* ------------------------------------------------------------------------- */ @@ -128,21 +128,21 @@ void do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) * Since the 7xx CPUs don't have an internal watchdog, this function is * board specific. */ -void watchdog_reset(void) +void watchdog_reset (void) { } -#endif /* CONFIG_WATCHDOG */ +#endif /* CONFIG_WATCHDOG */ /* ------------------------------------------------------------------------- */ void after_reloc (ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; + DECLARE_GLOBAL_DATA_PTR; - /* - * Jump to the main U-Boot board init code - */ - board_init_r(gd, dest_addr); + /* + * Jump to the main U-Boot board init code + */ + board_init_r (gd, dest_addr); } /* ------------------------------------------------------------------------- */ @@ -152,38 +152,23 @@ extern GraphicDevice smi; void video_get_info_str (int line_number, char *info) { - /* init video info strings for graphic console */ - switch (line_number) - { - case 1: - sprintf (info," MPC7xx V%d.%d at %d / %d MHz", - (get_pvr() >> 8) & 0xFF, - get_pvr() & 0xFF, - 400, - 100); - return; - case 2: - sprintf (info, " ELTEC ELPPC with %ld MB DRAM and %ld MB FLASH", - dram_size(0)/0x100000, - flash_init()/0x100000); - return; - case 3: - sprintf (info, " %s", smi.modeIdent); - return; - } - - /* no more info lines */ - *info = 0; - return; + /* init video info strings for graphic console */ + switch (line_number) { + case 1: + sprintf (info, " MPC7xx V%d.%d at %d / %d MHz", + (get_pvr () >> 8) & 0xFF, get_pvr () & 0xFF, 400, 100); + return; + case 2: + sprintf (info, " ELTEC ELPPC with %ld MB DRAM and %ld MB FLASH", + dram_size (0) / 0x100000, flash_init () / 0x100000); + return; + case 3: + sprintf (info, " %s", smi.modeIdent); + return; + } + + /* no more info lines */ + *info = 0; + return; } #endif - - - - - - - - - - diff --git a/board/eltec/elppc/flash.c b/board/eltec/elppc/flash.c index 73496a13de..442dd00519 100644 --- a/board/eltec/elppc/flash.c +++ b/board/eltec/elppc/flash.c @@ -57,7 +57,7 @@ unsigned long flash_init (void) /* Init: no FLASHes known */ for (i=0; iflash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - flash_init(); + printf ("missing or unknown FLASH type\n"); + flash_init(); } if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; + printf ("missing or unknown FLASH type\n"); + return; } switch (info->flash_id & FLASH_VENDMASK) { case FLASH_MAN_AMD: - printf ("AMD "); - break; + printf ("AMD "); + break; default: - printf ("Unknown Vendor "); - break; + printf ("Unknown Vendor "); + break; } switch (info->flash_id & FLASH_TYPEMASK) { case AMD_ID_F040B: - printf ("AM29F040B (4 Mbit)\n"); - break; + printf ("AM29F040B (4 Mbit)\n"); + break; case AMD_ID_F016D: - printf ("AM29F016D (16 Mbit)\n"); - break; + printf ("AM29F016D (16 Mbit)\n"); + break; case AMD_ID_F032B: - printf ("AM29F032B (32 Mbit)\n"); - break; + printf ("AM29F032B (32 Mbit)\n"); + break; default: - printf ("Unknown Chip Type\n"); - break; + printf ("Unknown Chip Type\n"); + break; } if (info->size >= (1 << 20)) { - printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); + printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); } else { - printf (" Size: %ld kB in %d Sectors\n", info->size >> 10, info->sector_count); + printf (" Size: %ld kB in %d Sectors\n", info->size >> 10, info->sector_count); } printf (" Sector Start Addresses:"); for (i=0; isector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count-1)) - size = info->start[i+1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k=0; kstart[i], - erased ? " E" : " ", - info->protect[i] ? "RO " : " "); + /* + * Check if whole sector is erased + */ + if (i != (info->sector_count-1)) + size = info->start[i+1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k=0; kstart[i], + erased ? " E" : " ", + info->protect[i] ? "RO " : " "); } printf ("\n"); } @@ -226,37 +226,37 @@ ulong flash_get_size (vu_long *addr, flash_info_t *info) /* We accept only two AMD types */ switch (vendor) { case (FLASH_WORD_SIZE)AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; + info->flash_id = FLASH_MAN_AMD; + break; default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ } switch (devid) { case (FLASH_WORD_SIZE)AMD_ID_F040B: - info->flash_id |= AMD_ID_F040B; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 0.5 MB */ + info->flash_id |= AMD_ID_F040B; + info->sector_count = 8; + info->size = 0x00080000; + break; /* => 0.5 MB */ case (FLASH_WORD_SIZE)AMD_ID_F016D: - info->flash_id |= AMD_ID_F016D; - info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ + info->flash_id |= AMD_ID_F016D; + info->sector_count = 32; + info->size = 0x00200000; + break; /* => 2 MB */ case (FLASH_WORD_SIZE)AMD_ID_F032B: - info->flash_id |= AMD_ID_F032B; - info->sector_count = 64; - info->size = 0x00400000; - break; /* => 4 MB */ + info->flash_id |= AMD_ID_F032B; + info->sector_count = 64; + info->size = 0x00400000; + break; /* => 4 MB */ default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ } @@ -266,20 +266,20 @@ ulong flash_get_size (vu_long *addr, flash_info_t *info) /* check for protected sectors */ for (i = 0; i < info->sector_count; i++) { - /* sector base address */ - info->start[i] = base + i * (info->size / info->sector_count); - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - caddr = (volatile unsigned char *)(info->start[i]); - info->protect[i] = caddr[2] & 1; + /* sector base address */ + info->start[i] = base + i * (info->size / info->sector_count); + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + caddr = (volatile unsigned char *)(info->start[i]); + info->protect[i] = caddr[2] & 1; } /* * Prevent writes to uninitialized FLASH. */ if (info->flash_id != FLASH_UNKNOWN) { - caddr = (volatile unsigned char *)info->start[0]; - caddr[0] = 0xF0; /* reset bank */ + caddr = (volatile unsigned char *)info->start[0]; + caddr[0] = 0xF0; /* reset bank */ } return (info->size); @@ -295,32 +295,32 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) int rc = 0; if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; } if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; + (info->flash_id > FLASH_AMD_COMP)) { + printf ("Can't erase unknown flash type - aborted\n"); + return 1; } prot = 0; for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } + if (info->protect[sect]) { + prot++; + } } if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); } else { - printf ("\n"); + printf ("\n"); } l_sect = -1; @@ -336,26 +336,26 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) /* Start erase on unprotected sectors */ for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (FLASH_WORD_SIZE *)(info->start[sect]); - if (info->flash_id & FLASH_MAN_SST) { - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */ - udelay(30000); /* wait 30 ms */ - } - else - addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ - l_sect = sect; - } + if (info->protect[sect] == 0) { /* not protected */ + addr = (FLASH_WORD_SIZE *)(info->start[sect]); + if (info->flash_id & FLASH_MAN_SST) { + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */ + udelay(30000); /* wait 30 ms */ + } + else + addr[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ + l_sect = sect; + } } /* re-enable interrupts if necessary */ if (flag) - enable_interrupts(); + enable_interrupts(); /* wait at least 80us - let's wait 1 ms */ udelay (1000); @@ -364,21 +364,21 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) * We wait for the last triggered sector */ if (l_sect < 0) - goto DONE; + goto DONE; start = get_timer (0); last = start; addr = (FLASH_WORD_SIZE *)(info->start[l_sect]); while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) { - if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + return 1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + serial_putc ('.'); + last = now; + } } DONE: @@ -408,42 +408,42 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) * handle unaligned start bytes */ if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; + data = 0; + for (i=0, cp=wp; i0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; } /* * handle word aligned part */ while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; + data = 0; + for (i=0; i<4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; } if (cnt == 0) { - return (0); + return (0); } /* @@ -451,11 +451,11 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) */ data = 0; for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; + data = (data << 8) | *src++; + --cnt; } for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); + data = (data << 8) | (*(uchar *)cp); } return (write_word(info, wp, data)); @@ -469,45 +469,44 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) */ static int write_word (flash_info_t *info, ulong dest, ulong data) { - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]); - volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest; - volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data; + volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)(info->start[0]); + volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest; + volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *)&data; ulong start; int flag; - int i; + int i; /* Check if Flash is (sufficiently) erased */ if ((*((volatile FLASH_WORD_SIZE *)dest) & - (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) { - return (2); + (FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) { + return (2); } /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); - for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++) - { - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0; + for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++) + { + addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0; - dest2[i] = data2[i]; + dest2[i] = data2[i]; - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); - /* data polling for D7 */ - start = get_timer (0); - while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != - (data2[i] & (FLASH_WORD_SIZE)0x00800080)) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - return (1); - } - } - } + /* data polling for D7 */ + start = get_timer (0); + while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != + (data2[i] & (FLASH_WORD_SIZE)0x00800080)) { + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + return (1); + } + } + } return (0); } /*----------------------------------------------------------------------------*/ - diff --git a/board/eltec/elppc/misc.c b/board/eltec/elppc/misc.c index 7bfb3a493d..f33aef71bc 100644 --- a/board/eltec/elppc/misc.c +++ b/board/eltec/elppc/misc.c @@ -32,7 +32,7 @@ extern char console_buffer[CFG_CBSIZE]; extern int l2_cache_enable (int l2control); extern int eepro100_write_eeprom (struct eth_device* dev, int location, - int addr_len, unsigned short data); + int addr_len, unsigned short data); extern int read_eeprom (struct eth_device* dev, int location, int addr_len); /*----------------------------------------------------------------------------*/ @@ -45,7 +45,7 @@ void *nvram_read(void *dest, const long src, size_t count) uchar *s = (uchar *) (CFG_ENV_MAP_ADRS + src); while (count--) - *d++ = *s++; + *d++ = *s++; return dest; } @@ -56,7 +56,7 @@ void nvram_write(long dest, const void *src, size_t count) uchar *s = (uchar *) src; while (count--) - *d++ = *s++; + *d++ = *s++; } /*----------------------------------------------------------------------------*/ @@ -72,7 +72,7 @@ int misc_init_r (void) u_int i, l, initSrom, copyNv; char buf[256]; char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0, - 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 }; + 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 }; /* Clock setting for MPC107 i2c */ mpc107_i2c_init (MPC107_EUMB_ADDR, 0x2b); @@ -91,166 +91,166 @@ int misc_init_r (void) /* read out current revision srom contens */ mpc107_srom_load (0x0000, (u_char*)&eerev, sizeof(revinfo), - SECOND_DEVICE, FIRST_BLOCK); + SECOND_DEVICE, FIRST_BLOCK); /* read out current nvram shadow image */ nvram_read (buf, CFG_NV_SROM_COPY_ADDR, CFG_SROM_SIZE); if (strcmp (eerev.magic, "ELTEC") != 0) { - /* srom is not initialized -> create a default revision info */ - for (i = 0, ptr = (u_char *)&eerev; i < sizeof(revinfo); i++) - *ptr++ = 0x00; - strcpy(eerev.magic, "ELTEC"); - eerev.revrev[0] = 1; - eerev.revrev[1] = 0; - eerev.size = 0x00E0; - eerev.category[0] = 0x01; - - /* node id from dead e128 as default */ - eerev.etheraddr[0] = 0x00; - eerev.etheraddr[1] = 0x00; - eerev.etheraddr[2] = 0x5B; - eerev.etheraddr[3] = 0x00; - eerev.etheraddr[4] = 0x2E; - eerev.etheraddr[5] = 0x4D; - - /* cache config word for ELPPC */ - *(int*)&eerev.res[0] = 0; - - initSrom = 1; /* force dialog */ - copyNv = 1; /* copy to nvram */ + /* srom is not initialized -> create a default revision info */ + for (i = 0, ptr = (u_char *)&eerev; i < sizeof(revinfo); i++) + *ptr++ = 0x00; + strcpy(eerev.magic, "ELTEC"); + eerev.revrev[0] = 1; + eerev.revrev[1] = 0; + eerev.size = 0x00E0; + eerev.category[0] = 0x01; + + /* node id from dead e128 as default */ + eerev.etheraddr[0] = 0x00; + eerev.etheraddr[1] = 0x00; + eerev.etheraddr[2] = 0x5B; + eerev.etheraddr[3] = 0x00; + eerev.etheraddr[4] = 0x2E; + eerev.etheraddr[5] = 0x4D; + + /* cache config word for ELPPC */ + *(int*)&eerev.res[0] = 0; + + initSrom = 1; /* force dialog */ + copyNv = 1; /* copy to nvram */ } if ((copyNv == 0) && (el_srom_checksum((u_char*)&eerev, CFG_SROM_SIZE) != - el_srom_checksum((u_char*)buf, CFG_SROM_SIZE))) + el_srom_checksum((u_char*)buf, CFG_SROM_SIZE))) { - printf ("Invalid revision info copy in nvram !\n"); - printf ("Press key:\n to copy current revision info to nvram.\n"); - printf (" to reenter revision info.\n"); - printf ("=> "); - if (0 != readline (NULL)) - { - switch ((char)toupper(console_buffer[0])) - { - case 'C': - copyNv = 1; - break; - case 'R': - copyNv = 1; - initSrom = 1; - break; - } - } + printf ("Invalid revision info copy in nvram !\n"); + printf ("Press key:\n to copy current revision info to nvram.\n"); + printf (" to reenter revision info.\n"); + printf ("=> "); + if (0 != readline (NULL)) + { + switch ((char)toupper(console_buffer[0])) + { + case 'C': + copyNv = 1; + break; + case 'R': + copyNv = 1; + initSrom = 1; + break; + } + } } if (initSrom) { - memcpy (buf, &eerev.revision[0][0], 14); /* save all revision info */ - printf ("Enter revision number (0-9): %c ", eerev.revision[0][0]); - if (0 != readline (NULL)) - { - eerev.revision[0][0] = (char)toupper(console_buffer[0]); - memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */ - } - - printf ("Enter revision character (A-Z): %c ", eerev.revision[0][1]); - if (1 == readline (NULL)) - { - eerev.revision[0][1] = (char)toupper(console_buffer[0]); - } - - printf ("Enter board name (V-XXXX-XXXX): %s ", (char *)&eerev.board); - if (11 == readline (NULL)) - { - for (i=0; i<11; i++) - eerev.board[i] = (char)toupper(console_buffer[i]); - eerev.board[11] = '\0'; - } - - printf ("Enter serial number: %s ", (char *)&eerev.serial ); - if (6 == readline (NULL)) - { - for (i=0; i<6; i++) - eerev.serial[i] = console_buffer[i]; - eerev.serial[6] = '\0'; - } - - printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", - eerev.etheraddr[0], eerev.etheraddr[1], - eerev.etheraddr[2], eerev.etheraddr[3], - eerev.etheraddr[4], eerev.etheraddr[5]); - if (12 == readline (NULL)) - { - for (i=0; i<12; i+=2) - eerev.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] + - hex[toupper(console_buffer[i+1])-'0']); - } - - l = strlen ((char *)&eerev.text); - printf("Add to text section (max 64 chr): %s ", (char *)&eerev.text ); - if (0 != readline (NULL)) - { - for (i = l; i<63; i++) - eerev.text[i] = console_buffer[i-l]; - eerev.text[63] = '\0'; - } - - /* prepare network eeprom */ - memset (buf, 0, 128); - - buf[0] = eerev.etheraddr[1]; - buf[1] = eerev.etheraddr[0]; - buf[2] = eerev.etheraddr[3]; - buf[3] = eerev.etheraddr[2]; - buf[4] = eerev.etheraddr[5]; - buf[5] = eerev.etheraddr[4]; - - *(unsigned short *)&buf[20] = 0x48B2; - *(unsigned short *)&buf[22] = 0x0004; - *(unsigned short *)&buf[24] = 0x1433; - - printf("\nSRom: Writing i82559 info ........ "); - if (eepro100_srom_store ((unsigned short *)buf) == -1) - printf("FAILED\n"); - else - printf("OK\n"); - - /* update CRC */ - eerev.crc = el_srom_checksum((u_char *)eerev.board, eerev.size); - - /* write new values */ - printf("\nSRom: Writing revision info ...... "); - if (mpc107_srom_store((BLOCK_SIZE-sizeof(revinfo)), (u_char *)&eerev, - sizeof(revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1) - printf("FAILED\n\n"); - else - printf("OK\n\n"); - - /* write new values as shadow image to nvram */ - nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE); + memcpy (buf, &eerev.revision[0][0], 14); /* save all revision info */ + printf ("Enter revision number (0-9): %c ", eerev.revision[0][0]); + if (0 != readline (NULL)) + { + eerev.revision[0][0] = (char)toupper(console_buffer[0]); + memcpy (&eerev.revision[1][0], buf, 12); /* shift rest of rev info */ + } + + printf ("Enter revision character (A-Z): %c ", eerev.revision[0][1]); + if (1 == readline (NULL)) + { + eerev.revision[0][1] = (char)toupper(console_buffer[0]); + } + + printf ("Enter board name (V-XXXX-XXXX): %s ", (char *)&eerev.board); + if (11 == readline (NULL)) + { + for (i=0; i<11; i++) + eerev.board[i] = (char)toupper(console_buffer[i]); + eerev.board[11] = '\0'; + } + + printf ("Enter serial number: %s ", (char *)&eerev.serial ); + if (6 == readline (NULL)) + { + for (i=0; i<6; i++) + eerev.serial[i] = console_buffer[i]; + eerev.serial[6] = '\0'; + } + + printf ("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", + eerev.etheraddr[0], eerev.etheraddr[1], + eerev.etheraddr[2], eerev.etheraddr[3], + eerev.etheraddr[4], eerev.etheraddr[5]); + if (12 == readline (NULL)) + { + for (i=0; i<12; i+=2) + eerev.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] + + hex[toupper(console_buffer[i+1])-'0']); + } + + l = strlen ((char *)&eerev.text); + printf("Add to text section (max 64 chr): %s ", (char *)&eerev.text ); + if (0 != readline (NULL)) + { + for (i = l; i<63; i++) + eerev.text[i] = console_buffer[i-l]; + eerev.text[63] = '\0'; + } + + /* prepare network eeprom */ + memset (buf, 0, 128); + + buf[0] = eerev.etheraddr[1]; + buf[1] = eerev.etheraddr[0]; + buf[2] = eerev.etheraddr[3]; + buf[3] = eerev.etheraddr[2]; + buf[4] = eerev.etheraddr[5]; + buf[5] = eerev.etheraddr[4]; + + *(unsigned short *)&buf[20] = 0x48B2; + *(unsigned short *)&buf[22] = 0x0004; + *(unsigned short *)&buf[24] = 0x1433; + + printf("\nSRom: Writing i82559 info ........ "); + if (eepro100_srom_store ((unsigned short *)buf) == -1) + printf("FAILED\n"); + else + printf("OK\n"); + + /* update CRC */ + eerev.crc = el_srom_checksum((u_char *)eerev.board, eerev.size); + + /* write new values */ + printf("\nSRom: Writing revision info ...... "); + if (mpc107_srom_store((BLOCK_SIZE-sizeof(revinfo)), (u_char *)&eerev, + sizeof(revinfo), SECOND_DEVICE, FIRST_BLOCK) == -1) + printf("FAILED\n\n"); + else + printf("OK\n\n"); + + /* write new values as shadow image to nvram */ + nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE); } /*if (initSrom) */ /* copy current values as shadow image to nvram */ if (initSrom == 0 && copyNv == 1) - nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE); + nvram_write (CFG_NV_SROM_COPY_ADDR, (void *)&eerev, CFG_SROM_SIZE); /* update environment */ sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x", - eerev.etheraddr[0], eerev.etheraddr[1], - eerev.etheraddr[2], eerev.etheraddr[3], - eerev.etheraddr[4], eerev.etheraddr[5]); + eerev.etheraddr[0], eerev.etheraddr[1], + eerev.etheraddr[2], eerev.etheraddr[3], + eerev.etheraddr[4], eerev.etheraddr[5]); setenv ("ethaddr", buf); /* set serial console as default */ if ((ptr = getenv ("console")) == NULL) - setenv ("console", "serial"); + setenv ("console", "serial"); /* print actual board identification */ printf("Ident: %s Ser %s Rev %c%c\n", - eerev.board, (char *)&eerev.serial, - eerev.revision[0][0], eerev.revision[0][1]); + eerev.board, (char *)&eerev.serial, + eerev.revision[0][0], eerev.revision[0][1]); return (0); } diff --git a/board/eltec/elppc/mpc107_i2c.c b/board/eltec/elppc/mpc107_i2c.c index a4bf5992d2..ae6642e952 100644 --- a/board/eltec/elppc/mpc107_i2c.c +++ b/board/eltec/elppc/mpc107_i2c.c @@ -43,13 +43,13 @@ unsigned long size; for (; size; size--) { - byte = *ptr++; - for (i = 8; i; i--) - { - f = ((byte & 1) ^ (accu & 1)) ? 0x84083001 : 0; - accu >>= 1; accu ^= f; - byte >>= 1; - } + byte = *ptr++; + for (i = 8; i; i--) + { + f = ((byte & 1) ^ (accu & 1)) ? 0x84083001 : 0; + accu >>= 1; accu ^= f; + byte >>= 1; + } } return(accu); } @@ -62,13 +62,13 @@ static int mpc107_i2c_wait ( unsigned long timeout ) while (((x = in32r(MPC107_I2CSR)) & 0x82) != 0x82) { - if (!timeout--) - return -1; + if (!timeout--) + return -1; } if (x & 0x10) { - return -1; + return -1; } out32r(MPC107_I2CSR, 0); @@ -81,8 +81,8 @@ static int mpc107_i2c_wait_idle ( unsigned long timeout ) { while (in32r(MPC107_I2CSR) & 0x20) { - if (!timeout--) - return -1; + if (!timeout--) + return -1; } return 0; } @@ -99,7 +99,7 @@ int mpc107_i2c_read_byte ( int data; if (!mpc107_eumb_addr) - return -6; + return -6; mpc107_i2c_wait_idle (timeout); @@ -112,15 +112,15 @@ int mpc107_i2c_read_byte ( if (mpc107_i2c_wait(timeout) < 0) { - printf("mpc107_i2c_read Error 1\n"); - return -2; + printf("mpc107_i2c_read Error 1\n"); + return -2; } if (in32r(MPC107_I2CSR)&0x1) { - /* Generate STOP condition; device busy or not existing */ - out32r(MPC107_I2CCR, 0x80); - return -1; + /* Generate STOP condition; device busy or not existing */ + out32r(MPC107_I2CCR, 0x80); + return -1; } /* Data address */ @@ -128,8 +128,8 @@ int mpc107_i2c_read_byte ( if (mpc107_i2c_wait(timeout) < 0) { - printf("mpc107_i2c_read Error 2\n"); - return -3; + printf("mpc107_i2c_read Error 2\n"); + return -3; } /* Switch to read - restart */ @@ -138,8 +138,8 @@ int mpc107_i2c_read_byte ( if (mpc107_i2c_wait(timeout) < 0) { - printf("mpc107_i2c_read Error 3\n"); - return -4; + printf("mpc107_i2c_read Error 3\n"); + return -4; } out32r(MPC107_I2CCR, 0xA8); /* no ACK */ @@ -147,8 +147,8 @@ int mpc107_i2c_read_byte ( if (mpc107_i2c_wait(timeout) < 0) { - printf("mpc107_i2c_read Error 4\n"); - return -5; + printf("mpc107_i2c_read Error 4\n"); + return -5; } /* Generate STOP condition */ out32r(MPC107_I2CCR, 0x88); @@ -171,7 +171,7 @@ int mpc107_i2c_write_byte ( unsigned long timeout = MPC107_I2C_TIMEOUT; if (!mpc107_eumb_addr) - return -6; + return -6; mpc107_i2c_wait_idle(timeout); @@ -184,8 +184,8 @@ int mpc107_i2c_write_byte ( if (mpc107_i2c_wait(timeout) < 0) { - printf("mpc107_i2c_write Error 1\n"); - return -1; + printf("mpc107_i2c_write Error 1\n"); + return -1; } /* Data address */ @@ -193,16 +193,16 @@ int mpc107_i2c_write_byte ( if (mpc107_i2c_wait(timeout) < 0) { - printf("mpc107_i2c_write Error 2\n"); - return -1; + printf("mpc107_i2c_write Error 2\n"); + return -1; } /* Write */ out32r(MPC107_I2CDR, val); if (mpc107_i2c_wait(timeout) < 0) { - printf("mpc107_i2c_write Error 3\n"); - return -1; + printf("mpc107_i2c_write Error 3\n"); + return -1; } /* Generate Stop Condition */ @@ -227,38 +227,38 @@ int mpc107_srom_load ( for (i = 0; i < cnt; i++) { - timeout=100; - do - { - val = mpc107_i2c_read_byte (device, block, addr); - if (val < -1) - { - printf("i2c_read_error %d at dev %x block %x addr %x\n", - val, device, block, addr); - return -1; - } - else if (timeout==0) - { - printf ("i2c_read_error: timeout at dev %x block %x addr %x\n", - device, block, addr); - return -1; - } - timeout--; - } while (val == -1); /* if no ack: try again! */ - - *pBuf++ = (unsigned char)val; - addr++; - - if ((addr == 0) && (i != cnt-1)) /* is it the same block ? */ - { - if (block == FIRST_BLOCK) - block = SECOND_BLOCK; - else - { - printf ("ic2_read_error: read beyond 2. block !\n"); - return -1; - } - } + timeout=100; + do + { + val = mpc107_i2c_read_byte (device, block, addr); + if (val < -1) + { + printf("i2c_read_error %d at dev %x block %x addr %x\n", + val, device, block, addr); + return -1; + } + else if (timeout==0) + { + printf ("i2c_read_error: timeout at dev %x block %x addr %x\n", + device, block, addr); + return -1; + } + timeout--; + } while (val == -1); /* if no ack: try again! */ + + *pBuf++ = (unsigned char)val; + addr++; + + if ((addr == 0) && (i != cnt-1)) /* is it the same block ? */ + { + if (block == FIRST_BLOCK) + block = SECOND_BLOCK; + else + { + printf ("ic2_read_error: read beyond 2. block !\n"); + return -1; + } + } } udelay(100000); return (cnt); @@ -277,20 +277,20 @@ int mpc107_srom_store ( for (i = 0; i < cnt; i++) { - while (mpc107_i2c_write_byte (device,block,addr,*pBuf) == 1); - addr++; - pBuf++; - - if ((addr == 0) && (i != cnt-1)) /* is it the same block ? */ - { - if (block == FIRST_BLOCK) - block = SECOND_BLOCK; - else - { - printf ("ic2_write_error: write beyond 2. block !\n"); - return -1; - } - } + while (mpc107_i2c_write_byte (device,block,addr,*pBuf) == 1); + addr++; + pBuf++; + + if ((addr == 0) && (i != cnt-1)) /* is it the same block ? */ + { + if (block == FIRST_BLOCK) + block = SECOND_BLOCK; + else + { + printf ("ic2_write_error: write beyond 2. block !\n"); + return -1; + } + } } udelay(100000); return(cnt); @@ -303,9 +303,9 @@ int mpc107_i2c_init ( unsigned long eumb_addr, unsigned long divider ) unsigned long x; if (eumb_addr) - mpc107_eumb_addr = eumb_addr; + mpc107_eumb_addr = eumb_addr; else - return -1; + return -1; /* Set I2C clock */ x = in32r(MPC107_I2CFDR) & 0xffffff00; diff --git a/board/eltec/elppc/pci.c b/board/eltec/elppc/pci.c index 2bbb5f2ea4..5b115ea617 100644 --- a/board/eltec/elppc/pci.c +++ b/board/eltec/elppc/pci.c @@ -42,44 +42,44 @@ void pci_init_board(void) hose->last_busno = 0xff; pci_set_region(hose->regions + 0, - CFG_PCI_MEMORY_BUS, - CFG_PCI_MEMORY_PHYS, - CFG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_MEMORY); + CFG_PCI_MEMORY_BUS, + CFG_PCI_MEMORY_PHYS, + CFG_PCI_MEMORY_SIZE, + PCI_REGION_MEM | PCI_REGION_MEMORY); /* PCI memory space */ pci_set_region(hose->regions + 1, - CFG_PCI_MEM_BUS, - CFG_PCI_MEM_PHYS, - CFG_PCI_MEM_SIZE, - PCI_REGION_MEM); + CFG_PCI_MEM_BUS, + CFG_PCI_MEM_PHYS, + CFG_PCI_MEM_SIZE, + PCI_REGION_MEM); /* ISA/PCI memory space */ pci_set_region(hose->regions + 2, - CFG_ISA_MEM_BUS, - CFG_ISA_MEM_PHYS, - CFG_ISA_MEM_SIZE, - PCI_REGION_MEM); + CFG_ISA_MEM_BUS, + CFG_ISA_MEM_PHYS, + CFG_ISA_MEM_SIZE, + PCI_REGION_MEM); /* PCI I/O space */ pci_set_region(hose->regions + 3, - CFG_PCI_IO_BUS, - CFG_PCI_IO_PHYS, - CFG_PCI_IO_SIZE, - PCI_REGION_IO); + CFG_PCI_IO_BUS, + CFG_PCI_IO_PHYS, + CFG_PCI_IO_SIZE, + PCI_REGION_IO); /* ISA/PCI I/O space */ pci_set_region(hose->regions + 4, - CFG_ISA_IO_BUS, - CFG_ISA_IO_PHYS, - CFG_ISA_IO_SIZE, - PCI_REGION_IO); + CFG_ISA_IO_BUS, + CFG_ISA_IO_PHYS, + CFG_ISA_IO_SIZE, + PCI_REGION_IO); hose->region_count = 5; pci_setup_indirect(hose, - MPC106_REG_ADDR, - MPC106_REG_DATA); + MPC106_REG_ADDR, + MPC106_REG_DATA); pci_register_hose(hose); diff --git a/board/eltec/elppc/srom.h b/board/eltec/elppc/srom.h index 7924bcd40c..c18ab91645 100644 --- a/board/eltec/elppc/srom.h +++ b/board/eltec/elppc/srom.h @@ -81,18 +81,18 @@ typedef struct { unsigned long el_srom_checksum (unsigned char *ptr, unsigned long size); int el_srom_load (unsigned char addr, unsigned char *buf, int cnt, - unsigned char device, unsigned char block); + unsigned char device, unsigned char block); int el_srom_store (unsigned char addr, unsigned char *buf, int cnt, - unsigned char device, unsigned char block); + unsigned char device, unsigned char block); int mpc107_i2c_init (unsigned long eumb_addr, unsigned long divider); int mpc107_i2c_read_byte (unsigned char device, unsigned char block, unsigned char offset); int mpc107_i2c_write_byte (unsigned char device, unsigned char block, - unsigned char offset, unsigned char val); + unsigned char offset, unsigned char val); int mpc107_srom_load (unsigned char addr, unsigned char *pBuf, int cnt, - unsigned char device, unsigned char block); + unsigned char device, unsigned char block); int mpc107_srom_store (unsigned char addr, unsigned char *pBuf, int cnt, - unsigned char device, unsigned char block); + unsigned char device, unsigned char block); int dc_srom_load (unsigned short *dest); int dc_srom_store (unsigned short *src); diff --git a/board/eltec/elppc/u-boot.lds b/board/eltec/elppc/u-boot.lds index de50bf49cc..0dfa8c0005 100644 --- a/board/eltec/elppc/u-boot.lds +++ b/board/eltec/elppc/u-boot.lds @@ -106,6 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + __start___ex_table = .; __ex_table : { *(__ex_table) } __stop___ex_table = .; diff --git a/board/eltec/mhpc/Makefile b/board/eltec/mhpc/Makefile index ef173d0366..13ce9fc9d2 100644 --- a/board/eltec/mhpc/Makefile +++ b/board/eltec/mhpc/Makefile @@ -28,7 +28,7 @@ LIB = lib$(BOARD).a OBJS = $(BOARD).o flash.o $(LIB): .depend $(OBJS) - $(AR) crv $@ $^ + $(AR) crv $@ $(OBJS) ######################################################################### diff --git a/board/eltec/mhpc/config.mk b/board/eltec/mhpc/config.mk index 607ebbcb1f..03934de3f6 100644 --- a/board/eltec/mhpc/config.mk +++ b/board/eltec/mhpc/config.mk @@ -31,19 +31,3 @@ TEXT_BASE = 0xfe000000 /*TEXT_BASE = 0x00200000 */ - - - - - - - - - - - - - - - - diff --git a/board/eltec/mhpc/flash.c b/board/eltec/mhpc/flash.c index e9c8f9862d..4cc66a973d 100644 --- a/board/eltec/mhpc/flash.c +++ b/board/eltec/mhpc/flash.c @@ -193,13 +193,13 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) switch (value) { case (FPW)INTEL_ID_28F640J5 : - info->flash_id += FLASH_28F640J5 ; - info->sector_count = 64; - info->size = 0x00800000; - break; /* => 8 MB */ + info->flash_id += FLASH_28F640J5 ; + info->sector_count = 64; + info->size = 0x00800000; + break; /* => 8 MB */ - default: - info->flash_id = FLASH_UNKNOWN; + default: + info->flash_id = FLASH_UNKNOWN; break; } @@ -429,25 +429,3 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) return (0); } - - - - - - - - - - - - - - - - - - - - - - diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c index 81f820a8d4..83952d8388 100644 --- a/board/eltec/mhpc/mhpc.c +++ b/board/eltec/mhpc/mhpc.c @@ -40,17 +40,17 @@ extern char console_buffer[CFG_CBSIZE]; extern void eeprom_init (void); extern int eeprom_read (unsigned dev_addr, unsigned offset, - unsigned char *buffer, unsigned cnt); + unsigned char *buffer, unsigned cnt); extern int eeprom_write (unsigned dev_addr, unsigned offset, - unsigned char *buffer, unsigned cnt); + unsigned char *buffer, unsigned cnt); /* globals */ void *video_hw_init(void); void video_set_lut (unsigned int index, /* color number */ - unsigned char r, /* red */ - unsigned char g, /* green */ - unsigned char b /* blue */ - ); + unsigned char r, /* red */ + unsigned char g, /* green */ + unsigned char b /* blue */ + ); GraphicDevice gdev; @@ -153,9 +153,9 @@ int misc_init_r(void) revinfo mhpcRevInfo; char nid[32]; char *mhpcSensorTypes[] = { "OMNIVISON OV7610/7620 color", - "OMNIVISON OV7110 b&w", NULL }; + "OMNIVISON OV7110 b&w", NULL }; char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0, - 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 }; + 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 }; int i; /* check revision data */ @@ -166,62 +166,62 @@ int misc_init_r(void) printf ("Enter revision number (0-9): %c ", mhpcRevInfo.revision[0]); if (0 != readline (NULL)) { - mhpcRevInfo.revision[0] = (char)toupper(console_buffer[0]); + mhpcRevInfo.revision[0] = (char)toupper(console_buffer[0]); } printf ("Enter revision character (A-Z): %c ", mhpcRevInfo.revision[1]); if (1 == readline (NULL)) { - mhpcRevInfo.revision[1] = (char)toupper(console_buffer[0]); + mhpcRevInfo.revision[1] = (char)toupper(console_buffer[0]); } printf("Enter board name (V-XXXX-XXXX): %s ", (char *)&mhpcRevInfo.board); if (11 == readline (NULL)) { - for (i=0; i<11; i++) - { - mhpcRevInfo.board[i] = (char)toupper(console_buffer[i]); - mhpcRevInfo.board[11] = '\0'; - } + for (i=0; i<11; i++) + { + mhpcRevInfo.board[i] = (char)toupper(console_buffer[i]); + mhpcRevInfo.board[11] = '\0'; + } } printf("Supported sensor types:\n"); i=0; do { - printf("\n \'%d\' : %s\n", i, mhpcSensorTypes[i]); + printf("\n \'%d\' : %s\n", i, mhpcSensorTypes[i]); } while ( mhpcSensorTypes[++i] != NULL ); do { - printf("\nEnter sensor number (0-255): %d ", (int)mhpcRevInfo.sensor ); - if (0 != readline (NULL)) - { - mhpcRevInfo.sensor = (unsigned char)simple_strtoul(console_buffer, NULL, 10); - } + printf("\nEnter sensor number (0-255): %d ", (int)mhpcRevInfo.sensor ); + if (0 != readline (NULL)) + { + mhpcRevInfo.sensor = (unsigned char)simple_strtoul(console_buffer, NULL, 10); + } } while ( mhpcRevInfo.sensor >= i ); printf("Enter serial number: %s ", (char *)&mhpcRevInfo.serial ); if (6 == readline (NULL)) { - for (i=0; i<6; i++) - { - mhpcRevInfo.serial[i] = console_buffer[i]; - } - mhpcRevInfo.serial[6] = '\0'; + for (i=0; i<6; i++) + { + mhpcRevInfo.serial[i] = console_buffer[i]; + } + mhpcRevInfo.serial[6] = '\0'; } printf("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", - mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], - mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], - mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5] ); + mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], + mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], + mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5] ); if (12 == readline (NULL)) { - for (i=0; i<12; i+=2) - { - mhpcRevInfo.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] + - hex[toupper(console_buffer[i+1])-'0']); - } + for (i=0; i<12; i+=2) + { + mhpcRevInfo.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] + + hex[toupper(console_buffer[i+1])-'0']); + } } /* setup new revision data */ @@ -230,16 +230,16 @@ int misc_init_r(void) /* set environment */ sprintf( nid, "%02x:%02x:%02x:%02x:%02x:%02x", - mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], - mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], - mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]); + mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], + mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], + mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]); setenv("ethaddr", nid); /* print actual board identification */ printf("Ident: %s %s Ser %s Rev %c%c\n", - mhpcRevInfo.board, (mhpcRevInfo.sensor==0?"color":"b&w"), - (char *)&mhpcRevInfo.serial, - mhpcRevInfo.revision[0], mhpcRevInfo.revision[1]); + mhpcRevInfo.board, (mhpcRevInfo.sensor==0?"color":"b&w"), + (char *)&mhpcRevInfo.serial, + mhpcRevInfo.revision[0], mhpcRevInfo.revision[1]); return (0); } @@ -308,29 +308,29 @@ static void video_circle (char *center, int radius, int color, int pitch) *(center-x+y*pitch) = color; while(y>x) { - if (d<0) - { - d += dE; - dE += 2; - dSE += 2; - x++; - } - else - { - d += dSE; - dE += 2; - dSE += 4; - x++; - y--; - } - *(center+x+y*pitch) = color; - *(center+y+x*pitch) = color; - *(center+y-x*pitch) = color; - *(center+x-y*pitch) = color; - *(center-x-y*pitch) = color; - *(center-y-x*pitch) = color; - *(center-y+x*pitch) = color; - *(center-x+y*pitch) = color; + if (d<0) + { + d += dE; + dE += 2; + dSE += 2; + x++; + } + else + { + d += dSE; + dE += 2; + dSE += 4; + x++; + y--; + } + *(center+x+y*pitch) = color; + *(center+y+x*pitch) = color; + *(center+y-x*pitch) = color; + *(center+x-y*pitch) = color; + *(center-x-y*pitch) = color; + *(center-y-x*pitch) = color; + *(center-y+x*pitch) = color; + *(center-x+y*pitch) = color; } } @@ -344,31 +344,31 @@ static void video_test_image(void) /* draw raster */ for (i=0; iim_lcd.lcd_lccr = 0x96000866; @@ -433,7 +433,7 @@ void *video_hw_init (void) immr->im_lcd.lcd_lcvcr = 0x900f0024; printf ("Video: 640x480 8Bit Index Lut %s\n", - (clut==1?"240/16 (gray/vga)":"256(gray)")); + (clut==1?"240/16 (gray/vga)":"256(gray)")); video_default_lut (clut); @@ -451,11 +451,11 @@ void *video_hw_init (void) gdev.gdfIndex = GDF__8BIT_INDEX; if (clut > 1) - /* return Graphic Device for console */ - return (void *)&gdev; + /* return Graphic Device for console */ + return (void *)&gdev; else - /* just graphic enabled - draw something beautiful */ - video_test_image(); + /* just graphic enabled - draw something beautiful */ + video_test_image(); return NULL; /* this disabels cfb - console */ } @@ -463,7 +463,7 @@ void *video_hw_init (void) /* ------------------------------------------------------------------------- */ void video_set_lut (unsigned int index, - unsigned char r, unsigned char g, unsigned char b) + unsigned char r, unsigned char g, unsigned char b) { unsigned int lum; unsigned short *pLut = (unsigned short *)(CFG_IMMR + 0x0e00); diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds index 7128155f85..526198cc51 100644 --- a/board/eltec/mhpc/u-boot.lds +++ b/board/eltec/mhpc/u-boot.lds @@ -99,6 +99,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + __start___ex_table = .; __ex_table : { *(__ex_table) } __stop___ex_table = .; @@ -121,4 +126,3 @@ SECTIONS _end = . ; PROVIDE (end = .); } - diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug index 8dc6d408ca..f6f7cf4fa5 100644 --- a/board/eltec/mhpc/u-boot.lds.debug +++ b/board/eltec/mhpc/u-boot.lds.debug @@ -106,6 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + __start___ex_table = .; __ex_table : { *(__ex_table) } __stop___ex_table = .; @@ -128,4 +133,3 @@ SECTIONS _end = . ; PROVIDE (end = .); } - -- cgit v1.2.1